FERROUS MATERIAL HANDLING PERMANENT LIFTING MAGNETS Dimensions are in inches. Maw = Maximum allowed weight on AISI 1020 Art - N° Maw in lbs on flat Maw in lbs on round Minimum Thickness for 100% force Diameter Min/max Ø A B C D E Weight (lbs) 20.01.100 220 110 0.59 1.18/7.87 4.92 2.67 2.75 2.12 1.57 9 20.01.250 550 275 0.98 1.18/7.09 7.51 3.85 3.42 2.75 1.96 21 20.01.500 1100 475 1.18 1.18/7.09 10.03 3.85 3.42 2.79 1.96 28.50 20.01.1000 2200 990 1.97 7.87/23.62 13.77 5.51 4.44 4.13 2.55 69.50 20.01.2000 4400 1790 2.36 1.57/11.81 17.32 7.08 6.69 4.92 2.36 187 20.01.3000 6600 2646 3.14 7.87/15.74 18.89 8.66 8.46 7.87 3.54 419 20.01.5000 11000 4950 3.93 7.87/15.74 21.25 14.56 12.40 9.05 3.93 882 APPLICATION Permanent lifting magnets are used for handling of ferrous materials, both flat and round, with raw or machined surface. A 3:1 safety ratio. EXECUTION This new range of lifting magnets ensures SAFE, QUICK and ECONOMIC handling. The Highest energy NEODYMIUM magnets allow to safely handle ferrous materials (no power supply required). The holding force remains constant with time. The robust ON/OFF switch mechanism is equipped with a safety device preventing unintentional operation. BRAILLON QUALITY SINCE 1921 « Everyone remembers their first Braillon »