Performance evaluation of thermoacoustic engine using different gases A.H. Ibrahim, M. M. Emam,Hosny Omar, K. Addas, E. Abdel-Rahman PERFORMANCE EVALUATION OF THERMOACOUSTIC ENGINE USING DIFFERENT GASES A.H. Ibrahim 1* , M. M. Emam 1 , Hosny Omar 1 , Karim Addas 1 and Ehab Abdel-Rahman 1,2+ 1 The American University in Cairo, School of Sciences and Engineering, Department of Physics, 11835 New Cairo, Egypt. 2 The American University in Cairo, School of Sciences and Engineering, Youssef Jameel Science and Technology Research Center (YJSTRC), 11835 New Cairo, Egypt. * On Leave from Mechanical Power Department, Faculty of Engineering, Cairo University, Giza, Egypt.
22
Embed
PERFORMANCE EVALUATION OF THERMOACOUSTIC ENGINE USING DIFFERENT GASES
PERFORMANCE EVALUATION OF THERMOACOUSTIC ENGINE USING DIFFERENT GASES. A.H. Ibrahim 1* , M . M. Emam 1 , Hosny Omar 1 , Karim Addas 1 and Ehab Abdel-Rahman 1,2+ 1 The American University in Cairo, School of Sciences and Engineering, Department of Physics, 11835 New Cairo, Egypt. - PowerPoint PPT Presentation
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Performance evaluation of thermoacoustic engine using different gases
A.H. Ibrahim, M. M. Emam,Hosny Omar, K. Addas, E. Abdel-Rahman
PERFORMANCE EVALUATION OF THERMOACOUSTIC ENGINE USING
DIFFERENT GASES
A.H. Ibrahim1*, M. M. Emam1, Hosny Omar1, Karim Addas1 and Ehab Abdel-Rahman1,2+
1The American University in Cairo, School of Sciences and Engineering, Department ofPhysics, 11835 New Cairo, Egypt.
2The American University in Cairo, School of Sciences and Engineering, Youssef JameelScience and Technology Research Center (YJSTRC), 11835 New Cairo, Egypt.
*On Leave from Mechanical Power Department, Faculty of Engineering, Cairo University,Giza, Egypt.
Performance evaluation of thermoacoustic engine using different gases
A.H. Ibrahim, M. M. Emam,Hosny Omar, K. Addas, E. Abdel-Rahman
Abstract
- Thermoacoustic engines (TAE) are devices that convert heat into useful acoustic work.
- TAE operate with pressurized mixture of gases.
- Selection of TAE gas define its efficiency, dimensions, and operating conditions.
- TAE acoustic work suffer losses in higher harmonics.
- Hysteresis is a main characteristic of the TAE transient operation profile.
Performance evaluation of thermoacoustic engine using different gases
A.H. Ibrahim, M. M. Emam,Hosny Omar, K. Addas, E. Abdel-Rahman
Introduction
- Thermoacoustic engines (TAE) advantages:
- Environment-friendly- Simple device with few or no moving parts- Easy maintenance – low cost- Can exploit waste heat and/or solar energy- Suitable for linear-alternator power converters
- TAE performance is characterized by:
- Onset temperature difference- Pressure ratio- Power output- Conversion efficiency (first and second law based)- Frequency of the output wave
Performance evaluation of thermoacoustic engine using different gases
A.H. Ibrahim, M. M. Emam,Hosny Omar, K. Addas, E. Abdel-Rahman
Objectives
- The study discusses
- Factors for selection of a working gas
- Harmonic dissertation in the output wave for different gases
- Transient profiles and hysteresis loops for different gases
Performance evaluation of thermoacoustic engine using different gases
A.H. Ibrahim, M. M. Emam,Hosny Omar, K. Addas, E. Abdel-Rahman
145 mm295 mm
595 mm
930 mm
Three-channel DC amplifier
Mic # 1 Mic # 2 Mic # 3
Mic # 4
Three-channel DC amplifierData-acquisition
TC1 TC2 TC3 TC5TC4
Computer
Voltage divider
AC power supply
Cold-side heat
exchanger
TH Tc
Stack
Apparatus
Performance evaluation of thermoacoustic engine using different gases
A.H. Ibrahim, M. M. Emam,Hosny Omar, K. Addas, E. Abdel-Rahman
ResonatorCooling waterElectric heater Input
Pressure sensor Oscilloscope
Apparatus
Performance evaluation of thermoacoustic engine using different gases
A.H. Ibrahim, M. M. Emam,Hosny Omar, K. Addas, E. Abdel-Rahman
- Mixtures of Air and Helium was used
- Pressure is atmospheric
- 3 different stack pore hydraulic diameters were used- 200 cell per in2
- 400 cell per in2
- 600 cell per in2
Apparatus
Performance evaluation of thermoacoustic engine using different gases
A.H. Ibrahim, M. M. Emam,Hosny Omar, K. Addas, E. Abdel-Rahman
Apparatus
Performance evaluation of thermoacoustic engine using different gases
A.H. Ibrahim, M. M. Emam,Hosny Omar, K. Addas, E. Abdel-Rahman
- Onset temperature was detected from a full engine cycle (startup – steady operation – shut down).
- Power was calculated from 2 microphone method calculations.
- Pressures at various points were analyzed into many harmonics by numerical fitting to the function:
* In our case, only the first 5 terms were considered (n = 0 to 4)
Analysis
Performance evaluation of thermoacoustic engine using different gases
A.H. Ibrahim, M. M. Emam,Hosny Omar, K. Addas, E. Abdel-Rahman
- Working gas should have:
- high speed of sound (power density speed of sound)