PERFECT IN FINAL EVERY MISSION 4 FINAL EXPERTS FOR THE REAL WORLD SINCE 1842 F-SERIES COMPACT WHEEL LOADERS 21F I 121F I 221F I 321F PERFECT IN EVERY MISSION 2 CASE, MORE THAN 170

TIER 4FINAL

EXPERTS FOR THE REAL WORLD

SINCE 1842

www.casece.com

F-SERIES COMPACT WHEEL LOADERS

21F I 121F I 221F I 321F

PERFECT IN

EVERY MISSION

2

CASE, MORE THAN 170 YEARS OF INNOVATIONA long history of industry fi rsts

• 1842: Case is founded.

• 1869: First Case portable steam engine - road construction is born.

• 1957: The fi rst factory - integrated loader/backhoe in the world: a Case industry fi rst.

• 1958: The fi rst Case 4-WD wheel loader, the W9.

• 1992: Case expands its wheel loader range with 21B, 121B, 221B and 321B models.

• 1998: Ride control on loader backhoes and skid steer loader: another Case fi rst.

• 2001: The exclusive Cooling Cube in Case wheel loaders means clean engine, reliability and massive bucket payloads.

• 2005: The E-Series compliant with EU Stage IIIA / Tier 3 regulations and with High Travel Speed option is launched.

PERFECT IN

EVERY MISSION

3

Model 21F 121F 221F 321F

Power 58 hp / 43 kW 64 hp / 48 kW 74 hp / 55 kW 74 hp / 55 kW

Torque 251 N.m 255 N.m 308 N.m 308 N.m

LOW EMISSIONSFpt, in-house advanced engine technology

Case equipment features the advanced in-house engine technology

developed by sister company FPT Industrial hat pioneered low emissions,

high effi ciency solutions for on- and off-road applications. With a broad

portfolio of technologies and products, FPT brings to Case customers the

competitive advantage of powertrain technologies that reliably delivers high

performance with low operating costs – proven technologies from a global

engine manufacturer that produces as many as 600,000 engines a year.

• 3.4 liter 4-cylinder Turbocharged Multiple Injection High Pressure

Common Rail Engine with Waste Gate for optimum turbo pressure stability

• EU Stage IIIB / Tier 4 fi nal compliant using Maintenance Free Technology:

- A Diesel Oxidation Catalyst (DOC) that reduces the quantity of

Particulate Matters (PM)

- A PM-Catalyst that traps residual PM

4

FAST ATTACHMENT CHANGE OVER• Hydraulic coupler controlled from the all-in-one joystick

• Depressurized push-pull connectors

FAST TRAVELLING• Engage Turtle/Rabbit speed under load

• 221F and 321F are available in High

Travel Speed (HTS) version: 33 km/h

SHORT TURNING RADIUSMakes your day-to-day job easier when

working in tight spaces.

HIGH PAYLOAD• From 1,9 t up to 2,5 t tipping load

• Auto-Ride Control optimizes bucket retention.

AUTO-RIDE CONTROLride Control, activated only when needed,

over 7 km/h prevents arm bouncing.

8 GOOD REASONS

TO USE IT

5

HIGH VERSATILITYeasy asphalt planing, snow blowing, brooming, compacting and much more with:

• 1 or 2 auxiliary hydraulic circuit

• Creep speed: max fl ow at constant low speed

• High fl ow option on 221F and 321F

• The wide offering of Case attachments

LOW EMISSIONS• EU Stage IIIB / Tier 4 fi nal compliant

• No particulate fi lter

• No fuel injectors in the exhaust

COMFORT CAB• 10 air vents ensure perfect climate control in all seasons

• Control all functions from the joystick

6

GREATER STABILITYOscillating rear axle

The combination of the articulated joint and the rear oscillating axle reduces maximum cab oscillation by 50% or more.

MILLIMETRIC CONTROLInch and brake pedal

It progressively disengages the transmission during the decelerating phase and progressively engages the brakes.

LOW CAB PROFILETake the shortest path

No waste of time with the reduced cab height:

• 21F and 121F: 2.46 m

• 221F: 2.63 m

• 321F: 2.68 m

You can always take the shortest path from point A to point B - in indoor jobs or when transporting on a truck.

PERFECT IN

EVERY MISSION

7

SUPERIOR DUMP HEIGHTCentred and higher loading

The superior hinge pin height and the Case “banana“ arms make it easy to load at the centre

of the trailer without touching the edge with the arms.

HIGH PAYLOAD, HANDLE HEAVIER PALLETS

8

FAST ATTACHMENT CHANGE OVERPlug and unplug your attachment in a few seconds

With the depressurized push-pull connectors you will never need hand tools to swap your attachments.

Front electrical socket

For multi-functioning or special attachments.

Standard fl ow or high fl ow

• Standard Flow (Max pressure: 230 bar):

- 21F-121F: 67 lpm @ 2500 rpm

- 221F-321F: 85 lpm @ 2500 rpm

• The High Flow package is available on 221F-321F:

- 130 lpm @ 2500 rpm

High Flow option always comes as part of a package including Creep Speed, Front electrical socket and Return

Depressurized Drain.

PERFECT IN

EVERY MISSION

HIGH VERSATILITY READY FOR EVERY ATTACHMENT

9

SUPERIOR CAB SAFETYCab structure: rops and fops level 2 come as standard

Designed to protect the operator in case the machine rolls over or a 227 kg rock falls from 5 meters height on the roof.

EASY CAB ACCESSEasy entrance

With low cab fl oor and wide steps.

If you want even more

The Deluxe Option includes an additional storage compartment under you left hand, storage spaces around the seat

and height adjustment of the steering wheel.

ALL-IN-ONE Joystick

Adjustable wrist rest

10 air vents

COMFORT CAB WORK AROUND THE CLOCK

ROPSFOPSLEVEL 2

Tilting adjustment

of the steering wheel

10

THE CASE DEALER: YOUR PROFESSIONAL PARTNERYour success starts with world-class Case machinery and attachments.

Your Case dealer will help you work smarter and faster by selecting equipment that delivers performance and

operator comfort.

Your dealer has the knowledge and experience necessary to help you choose the right attachments so you can…

• Work faster and extend equipment life.

• Increase machine utilization.

• Increase your capabilities.

Let your Case dealer service your machine on the jobsite.

You’ll be back on the job faster.

Advantages include…

• Responsive job site service to keep your equipment running.

• Increase machine uptime.

• Certifi ed service staff and improved parts availability.

11

PARTSWhen you’re looking for superior parts options to maximize the performance and lower the operating costs of your

Case machinery, turn to CNH Industrial Genuine Parts to keep you equipped for success.

CNH Industrial Genuine Parts fi t better, install faster and last longer and in an industry where “high impact” and

“heavy lifting” are the norm, the smallest mechanical differences can lead to big problems.

CNH Industrial Genuine Parts from Case are manufactured from superior materials and specifi cally designed for

Case construction equipment to continually and reliably withstand the punishment of everyday construction. So

steer clear of mechanical problems and future breakdowns, by choosing CNH Industrial Genuine Parts from Case.

They’re the only parts that are fi eld-tested and proven to keep your Case equipment performing its best.

SERVICE. RELY ON CASE TO DELIVER FOR YOUYour commitment to your operation is evident every day, but that doesn’t minimize the enormous pressure you

face to reduce operating costs and improve productivity. So when you’re on the job, make sure you have top-notch

service and support of Case behind you every step of the way.

With our factory trained technicians, you can ensure that top-notch service professionals are working on your

maintenance needs, so you can focus on your business and the big job challenges ahead, not on the tasks of

servicing your equipment.

With your Case Service, you get more than mere oil changes. A Case Service ensures your Case equipment receives

a thorough service that meets all requirements of its service schedules and properly maintains it for the day-in, day-

out punishment of construction work.

Don’t give another thought to time-consuming maintenance tasks. Simply rest easy and make certain that your

service needs are taken care of by a Case factory trained technician.

12

When the unexpected occurs, you need to know your

equipment is protected.

At Case Construction we understand the importance of your

machinery being in good working order when it counts.

ProCover is designed to help keep your equipment working

well beyond the manufacturer’s base warranty period while

taking away the concerns of the cost and inconvenience of

mechanical failure.

WHAT ARE THE ADVANTAGES OF PROCOVER?

PEACE OF MIND

Provides protection beyond the Manufacturer’s Base

Warranty Period.

FLEXIBLE OPTIONS

Plans can be customised to meet individual needs.

DEPENDABLE SERVICE

Eligible repairs completed by an authorised Case

Construction Dealership and their trained service

technician’s using genuine OEM parts & lubricants.

TRANSFERABLE PROTECTION

New Equipment Plans may be transferred to a new

owner at no charge

COVERAGE

• STANDARD

PROTECTION PLAN 3 Years / 3000 Hours

Additional years/hours can be purchased.

Please contact your local Case Construction

dealer for further information.

13

This plan provides coverage for the components listed below when a failure occurs due to a defect in material or

workmanship, and may provide coverage for additional components not listed when the damage is caused by or

resulting from a covered failure of a listed component.

ENGINE AND ALL INTERNAL

LUBRICATED COMPONENTS WITHINTRANSMISSIONS/AXLES/HYDROSTATICS ELECTRICAL HYDRAULICS

Accessory Gears Axle Housing Alternator Accumulator And Related Relief Valve

Air Intake Hose Axle Shaft Gauges Brake Accumulator

Camshaft Clutch Discs (Wet Only) Horn Brake Pressure Sensor

Camshaft Bearings Clutch Plates (Wet Only) Indicators Brake Pump, Brake Valve

Camshaft Drive Gear Control Rods Instruments Differential Lock Valve

Catalytic Converter Counter Shaft Clutch Electronic Joysticks Fan Pumps And Motors

Charge Air Cooler Differential Housing Electric Motors Hydraulic Cylinders

Cold Start Enrichment Systems Differential Pinion Gear / Ring Gear Factory Installed Telematics Hydraulic Hoses and Piping

Connecting Rods & Bearings Drive Axle Hub Sensors Hydraulic Motors

Crankshaft Bearings & Gear Drive Shaft Support Bearing Solenoid Valves Hydraulic Oil Coolers

Crankshaft Including Front And Rear Crankshaft Seals Drive Shaft with Universal Joints Starter And Starter Solenoid Hydraulic Pumps

Cylinder Heads/ Head Gaskets Electronic Transmission Controller and Valve Switches Hydraulic Reservoir

Cylinder Liners Enclosed Oil Immersed Chains and Sprockets Traction Control System Hydraulic Valves

Diesel Exhaust Fluid Tank and Dispensing System External Oil Lines Voltage Regulator Internal O-Rings and Bonded Washers

Diesel Particulate Filter Filler Tubes (Transmission) Wiring Harnesses Pilot Control

EGR System Manifold Final Drive Pinion Wiring Harnesses Exclusions Pressure Reducing Valves

Electronic Engine Control Module Final Drive Planetary Gears Rubbing, Chafi ng, Loose Or Corroded Connections Unloading Valves

Engine Block Front Wheel Drive SensorsFACTORY INSTALLED HEATAND

AIR CONDITIONINGSTRUCTURAL

Engine Mounts And Supports Hydraulic Drive / Travel Motor Accumulator Backhoe Booms

Engine Oil Cooler Hydraulic Drive Pump Clutch Backhoe/Excavator Dipper Sticks

Engine Speed Controls, Linkages, and Cables Hydraulic Transmission-Control Valve Compressor C Frame

Exhaust Manifold and Muffl er Hydrostatic Motor Condenser Car Body

Fan And Fan Drive Hydrostatic Transmission Charge Pump Dryer Chassis

Filter Mount Hydrostatic Transmission Pump Evaporator Circle Frame

Flywheel, Ring Gear Hydrostatic/Hydraulic Pump Drives Expansion Valve Engine Frame

Front And Rear Engine Covers And Seals Internal Lubricated Clutch Housings Heater Core Equipment Frame

Front Damper Internal Transmission Control Linkage Hoses Excavator Booms

Fuel Lines Internal Wet Service Brakes Pulley Falling Object Protection Structure (FOPS)

Fuel TankMFWD Axle/Differential Assembly including

Driveshaft and U JointSeals & Gaskets Forklift Masts

Fuel Transfer Pump & Gasket Planetary Gear Carrier Temperature Control Programmers and ValvesInner and Outer Dipper Arms of the Extendable Boom

(Backhoe Loader)

Injection Pump Pneumatic Valves OPERATOR AREA Main Frame

Injectors Rotary Hydraulic Manifold Covers and Panels Rollover Protection Structure (ROPS)

Intake and Exhaust Manifold And Gaskets Splitter Drive/Drop Box Exterior/Interior Door/Panel Latches, Hinges & Struts Swing Frame

Oil Filler Tube Steering Clutches (Wet) Exterior/Interior Moldings Swing Tower Castings (Backhoe Loader)

Oil Lines Swing Motor And Swing Gear Box Knobs for Switches and Handles Track Frame

Oil Pan And Gasket Torque Converter Mirrors Wheel Loader/Skid steer Loader Arms

Oil Pump Torque Converter Pump Seat Frame & Suspension

Pistons & Rings Transfer Drive

Pre-Cleaner/Air Cleaner Housing Transmission Case

Pressure/Temperature Sensors & Sending Units Transmission Gears, Bearings, & Shafts

Pulleys Transmission Pump

Radiator Travel & Swing Sections (only) Of Main Control Valve

Rocker Arm Assembly Travel Control Valve

Selective Catalytic Reduction System Turntable Bearing

Thermostats Undercarriage Roller And Idler Seals And Bearings

Timing Gears Undercarriage Tensioners

Turbocharger And GasketUNDERCARRIAGE EXCLUSIONS:

Sprocket, Tracks, Pads, Bolts, Chains, Or Any Failure

Due To Wear, Or Breakage Caused By WearValve Cover And Gasket

Water Piping

Water Pumps

STANDARD PROCOVER PLUS PROTECTION PLAN

CONSTRUCTION EQUIPMENT MASTER PARTS SCHEDULE

PREMIER COMPONENTS COVERED

14

TRANSMISSIONHydrostatic 4-wheel Drive Transmission _________________ Travel speed

is proportional to the pressure on the throttle.Speed with standard tyresOperating speed range ________________________________ 0–5 km/hTravel speed range__________________________________ 0–20 km/hOptional High Travel Speed ______________________________ 33 km/h(upon request on 221F and 321F)“Inch & Brake” PedalPower transfer from the transmission to the bucket hydraulics at constant rpm. Optimum speed control at low speed.Optional Creep Speed (upon request on 221F and 321F):Set and adjust travel speed in the 1-5 km/h range, adjust engine rpm for hand-free asphalt planing, snow blowing, brooming.

DIFFERENTIAL CHOICELimited slip front & rear (all models) or Front & rear open diff (21F & 121F) or open with 100% lock on front and rear differentials (221F & 321F)

TYRESStandard21F/121F __________________________________________ 12.5-18221F ______________________________________________ 12.5-20321F ______________________________________________ 14.5-20 More special tyres upon request

BRAKESStandard brakes ___________________________________ disc brake.

Located in hubs for 221F/321F, centre mounted for 21F/121FParking brakes ____________________ disc brake on transmission shaft

STEERINGFully hydraulic center pivot steering.Front and rear wheels follow the same track.Steering angle of 40° to each side.Emergency steering function.

ELECTRICAL SYSTEMVoltage _______________________________________________ 12 VBattery _____________________________________________ 95 A.hAlternator ___________________________________________120 A.h

CAPACITIESDiesel ________________________________________________ 87 lEngine oil ______________________________________________ 7 lCooling liquid ___________________________________________ 16 lTotal hydraulic oil ________________________________________ 57 lFront axle ______________________________________________ 9 lRear axle ______________________________________________ 12 l

HYDRAULICSGear pump for loading and steering hydraulicsPriority valve favouring steering hydraulics3rd or 4th functions are proportionally controlled by the All-in-one Joystick with, Flow memory button as standard.Standard Flow 21F-121F _________________________________ 67 lpm @ 2500 rpm 221F-321F ________________________________ 85 lpm @ 2500 rpmHigh Flow packageavailable upon request on 221F-321F ____________ 130 lpm @ 2500 rpm

NOISE AND VIBRATIONSExternal - Guaranteed acoustic power-level LWA (1) _____________ 101 dBCab interior - Sound Pressure Level (2) 21F-121F: ______________ 71 dB

221F-321F: _____________ 72 dBHand- / arm- / body -vibration (3) ___________________ < 2.5 / 0.5 m/s²(1) According to 2000/14/EG & appendixes.(2) According to ISO 6396.(3) According to ISO 8041

EMISSIONSNox + HC ________________________________________ 4.5 g/kW/hCO ____________________________________________ 0.10 g/kW/hPM ____________________________________________ 0.02 g/kW/h

EASY PALLET LOADING Linkage: Mechanical self-levelling on XT and Z-bar.

XT is the best linkage for pallet handling. Visibility on the pallet is the best with one lifting cylinder only and payload is optimum

Z-BAR is the most versatile linkage type. It offers more breakout force thanks to the 2 lifting cylinders and a higher dump height.

F-SERIES

COMPACT WHEEL LOADERS

15

GENERAL DIMENSIONS

21F 121F 221F 321F

H1 2.46 m 2.46 m 2.63 m 2.68 m

H2 45 cm 45 cm 44 cm 49 cm

W1 1.74 m 1.74 m 1.80 m 1.86 m

W2 1.90 m 2.05 m 2.05 m 2.10 m

L1 2.08 m 2.08 m 2.22 m 2.23 m

R 3.72 m 3.72 m 3.99 m 3.99 m

SPECIFICATIONS WITH BUCKET

AB

C

L

D

E

45°

21F 121F 221F 321F

Z-BAR XT Z-BAR XT Z-BAR Z-BAR

Bucket Volume (SAE) 0.7-1.0 m3 0.9 -1.1 m3 1.0 - 1.2 m3 1.1 - 1.2 m3

Tipping load straight 3.9 t 3.8 t 4.1 t 4.1 t 4.2 t 4.6 t

Tipping load at full turn (40°) 3.2 t 3.3 t 3.3 t 3.5 t 3.6 t 3.7 t

Payload @50% 1.6 t 1.6 t 1.7 t 1.8 t 1.8 t 1.9 t

Breakout Force 5925 daN 4024 daN 5375 daN 3849 daN 6269 daN 6194 daN

L2 Length with bucket 5.28 m 5.23 m 5.39 m 5.33 m 5.62 m 5.68 m

A Max bucket height 3.14 m 3.94 m 3.18 m 4.09 m 3.29 m 3.40 m

B Hinge pin height 3.14 m 3.11 m 3.18 m 3.13 m 3.29 m 3.40 m

C Dump height @45° 2.49 m 2.34 m 2.52 m 2.35 m 2.60 m 2.69 m

D Dig Depth 7.3 cm 13 cm 12 cm 14 cm 10 cm 8.4 cm

E Reach at full height 77 cm 71 cm 83 cm 74 cm 85 cm 85 cm

Operating weight (std. bucket) 5115 kg 5015 kg 5423 kg 5208 kg 5694 kg 6195 kg

Operating weight (4-in-1 bucket) 5414 kg 5304 kg 5742 kg 5507 kg 6034 kg 6535 kg

SPECIFICATIONS WITH FORKS

F BG2

G1

J2

J3

J1* on even ground, according to ISO 8313 and EN 474-3

21F 121F 221F 321F

Z-BAR XT Z-BAR XT Z-BAR Z-BAR

Tipping load straight 2.8 t 3.0 t 3.0 t 3.2 t 3.1 t 3.6 t

Tipping load at full turn (40°) 2.4 t 2.6 t 2.6 t 2.8 t 2.7 t 3.0 t

Payload @80%* 1.9 t 2.1 t 2.1 t 2.2 t 2.2 t 2.5 t

F Max overall height 3.48 m 3.63 m 3.53 m 3.65 m 3.63 m 3.73 m

B Hinge pin height 3.14 m 3.11 m 3.18 m 3.13 m 3.29 m 3.40 m

G2 Max fork height 2.90 m 2.96 m 2.95 m 2.97 m 3.08 m 3.19 m

G1 Forks height @ max reach 1.27 m 1.34 m 1.27 m 1.34 m 1.34 m 1.39 m

J1 Reach @ ground level 0.94 m 0.77 m 1.01 m 0.80 m 0.99 m 0.99 cm

J2 Max Reach 1.35 m 1.26 m 1.41 m 1.27 m 1.43 m 1.43 cm

J3 Reach @ max height 0.59 m 0.46 m 0.63 m 0.47 m 0.61 m 0.61 m

Operating weight with forks 5020 kg 4910 kg 5310 kg 5090 kg 5559 kg 6060 kg

SPECIFICATIONS

EXPERTS FOR THE REAL WORLD

SINCE 1842

www.casece.com

CustomerCCACCssistanc

CustomestoCAAC

ecc

1300 99 CASE

NOTE: CASE provides specifi c outfi ts for various countries and manyoptional fi ttings (OPT). The illustrations on this or other leafl ets mayrelate to standard or optional fi ttings. Please consult your CASEdealer for any information in this regard and any possible updating on components. CNH Industrial reserves the right to modify machine specifi cations without incurring any obligation relating to such changes.

CASE CONSTRUCTION EQUIPMENT

CONTACT INFORMATION

AUSTRALIA

31-53 Kurrajong Road

St. Marys nsw 2760

Form No. ANZ4401CCGB - Print in Australia - MediaCross Firenze - 06/15