Jurnal Petro 2017 VOLUME VI No. 4, DESEMBER 2017 P-ISSN : 1907-0438 E-ISSN : 2614-7297 http://trijurnal.lemlit.trisakti.ac.id/index.php/petro Jurnal Petro Desember, Th, 2017 116 PERENCANAAN LUMPUR PEMBORAN BERBAHAN DASAR AIR PADA SUMUR X LAPANGAN Y Andreas Junianto 1 ,Cahaya Rosyidan 1 , dan Bayu Satyawira 1 1 Petroleum Engineering Department, FTKE, Universitas Trisakti ABSTRACT Y Field is a field that located on Sumatera Island. That located at Jambi Province precisely. This X well which will be drilled is a development wells at Y field. All of the draw well in this Y Field is an onshore wells. This X well shall be drilled using water-based mud. This water-based mud is used because it is cheaper and more economical than using oil-based. But, this mud needs tobe added an additive because the water-based mud has a deficiency in controlling the formations of clay. Planning of mud system for X well is using method of the offset wells, that is using around of wells data to be used as a comparison. This first X well drilled for hole section 26” by size of casing 20” with depth up to 150 ft and mud which used is type of gel/water. And then it is continued with hole section 17 ½” by size of casing 13 3/8” with continuing the former mud of drilling in hole section 26”. The depth starts from 150 ft until 1000 ft. The next hole section is 12 ¼” by size of casing 9 3/8” which a depth that starts from 1000ft until 4100 ft and using new of mud with polymer mud. Last hole section 8 ½” without casing and using polymer mud to continuing the previous drilling from the depth of 4100 ft until 4900 ft. Problem that faces by this draw well is the presence of faults and high pressure at depths below 1000 ft, so it needs to be prepared LCM (Loss Control Material) and Jumbo Bag to overcome the occurrence of kick. Keyword: mud, offset wells, and kick
10
Embed
PERENCANAAN LUMPUR PEMBORAN BERBAHAN DASAR AIR … · TEORI DASAR Fungsi Lumpur Pemboran Penggunaan lumpur pemboran adalah sebagai fluida yang berperan untuk mencapai keberhasilan
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Andreas Junianto1 ,Cahaya Rosyidan1 , dan Bayu Satyawira1
1Petroleum Engineering Department, FTKE, Universitas Trisakti
ABSTRACT
Y Field is a field that located on Sumatera Island. That located at Jambi Province precisely. This
X well which will be drilled is a development wells at Y field. All of the draw well in this Y Field is an onshore wells. This X well shall be drilled using water-based mud. This water-based mud is used because it
is cheaper and more economical than using oil-based. But, this mud needs tobe added an additive because
the water-based mud has a deficiency in controlling the formations of clay. Planning of mud system for X
well is using method of the offset wells, that is using around of wells data to be used as a comparison. This first X well drilled for hole section 26” by size of casing 20” with depth up to 150 ft and mud which used
is type of gel/water. And then it is continued with hole section 17 ½” by size of casing 13 3/8” with
continuing the former mud of drilling in hole section 26”. The depth starts from 150 ft until 1000 ft. The next hole section is 12 ¼” by size of casing 9 3/8” which a depth that starts from 1000ft until 4100 ft and
using new of mud with polymer mud. Last hole section 8 ½” without casing and using polymer mud to
continuing the previous drilling from the depth of 4100 ft until 4900 ft. Problem that faces by this draw
well is the presence of faults and high pressure at depths below 1000 ft, so it needs to be prepared LCM (Loss Control Material) and Jumbo Bag to overcome the occurrence of kick.
offset yang sudah di bor dan berada di dekat sumur
ini. Data sumur offset dipakai menjadi acuan dalam pengambilan keputusan untuk pemakaian kandungan
atau material lumpur yang akan digunakan tiap-tiap
section. Sedikitnya data dari sumur offset sangat
berpengaruh dalam pengambilan keputusan. Analisa
sumur offset yang didapat adalah masalah-masalah
yang dapat terjadi ketika proses pemboran,
mengetahui zona atau formasi yang akan dibor juga
mendapatkan sifat fisik lumpur yang akan dipakai
untuk pemboran sumur X. Selain itu juga diketahui
adanya tekanan tinggi dari nilai pore pressure yang
akan ditembus yaitu ketika mencapai zona reservoir. Perencanaan pemboran dilakukan menjadi
empat trayek dan mud properties dari keempat trayek
tersebut tidak ada yang berubah dari pemboran
sebelumnya. Mud properties pada pemboran
sebelumnya sudah dianggap yang terbaik sehingga
tidak perlu diganti keseluruhan. Hanya yang
membedakan adalah ketika sudah mencapai zona
reservoir berat jenis lumpur berubah.
Pemboran sumur dimulai dengan trayek
26 inch dengan casing 20 inch. Interval kedalaman dari
0 sampai 150 ft. Lumpur yang digunakan adalah berjenis gel/water dengan mud weight 8.6 sampai
8.9 ppg. Digunakan lumpur gel/water karena
pada kedalaman ini formasi cenderung rapuh. Lumpur dengan jenis ini mampu membuat faktor skin dan menahan dinding agar tidak runtuh. Lumpur ini juga dipilih dengan alasan karena pada kedalaman ini bukan zona reservoir serta kedalaman yang masih dangkal. Pada trayek ini mengeluarkan biaya yang paling murah yaitu dengan biaya total sebesar
7919.96 USD dengan biaya perfeet sebesar 52.8
USD dan biaya perbarrel sebesar 6.6 USD.
Setelah casing 20 inch terpasang
maka dilanjutkan dengan trayek 17 ½ inch
sepanjang 850 ft dari kedalaman 150 ft sampai 1000 ft. Casing yang dipakai pada kedalaman
ini sebesar 13 3/8 inch.
Lumpur yang dipakai berasal dari lumpur bekas pemboran sebelumnya yaitu jenis gel/water
namun dengan menambahkan mud weight menjadi
8.9sampai 9.7 ppg. Biaya total pada trayek ini sebesar 21,024 USD dengan biaya perfeet sebesar 25 USD dan biaya perbarrel sebesar 11.5 USD.
Trayek berikutnya adalah sebesar 12 ¼ inch sepanjang 3100 ft dari kedalaman 1000 ft sampai 4100 ft dan dilanjutkan dengan pemasangan casing 9 3/8 inch. Lumpur yang dipakai pada kedalaman ini adalah lumpur jenis polimer. Bentonite sudah tidak dipakai lagi pada kedalaman ini karena sudah memasuki zona reservoir. Pemilihan xanthan gum lebih baik pada zona reservoir karena polimer xanthan gum tidak bereaksi dengan clay sehingga tidak merusak reservoir dan mengurangi formation damage. Pada kedalaman ini berat jenis lumpur dinaikkan menjadi 9.7 sampai 12.6 ppg dengan penambahan barite dan CaCO3. Biaya yang dikeluarkan pada trayek ini sebesar 140,000 USD dengan biaya perfeet 44.5 USD dan biaya perbarrel 41USD. Trayek ini merupakan trayek dengan biaya termahal karena
13. Sadiya, Robani. “Diktat Kuliah Teknik Lumpur Pemboran”. Jakarta, Trisakti.
14. Christian, Stefanus. 2012. Lumpur Pemboran. http://stefanuschristian121190.blogspot.com/2012/11/lumpur-pemboran_1805.html (diakses tanggal 10 Oktober 2014)
15. Pangea, Rhoe. 2009. Geologi Regional Cekungan Sumatera Selatan. http://viq-
pangea.blogspot.com/2009/06/geologi-
regional-cekungan-sumatera.html (diakses
tanggal 29 November 2014) 16. http://belajar-
geologi.blogspot.com/2011/11/stratigrafi-
cekungan-sumatera-selatan.html (diakses tanggal 29 November 2014)
17. http://www.samudraenergy.com/history.htm l (diakses tanggal 10 November 2014)
18. http://www.samudraenergy.com/asset-
portfolio.html (diakses tanggal 10
November 2014) 19. http://www.scribd.com/doc/156326916/mas