42 43 www.surplustronics.co.nz T 09-8375020 F 09-8375019 E [email protected]Most items in this catalogue are stocked. Just search a code on our website. If not listed, feel free to make an inquiry. COWBELLS Metal cowbells with integral clamp for mounting to drum hardware. PLASTIC BLOCKS Modern version of traditional wood blocks in a hard plastic resin material. Integral clamp and bracket facilitate attachment to various drum hardware. AGOGOS A set of high and low conical black steel agogo bells held by an angled steel bar. Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65 x 150 x 270mm Weight .................................................. 560g VIBRA-SLAP A percussionist’s vibra-slap with a wooden bell with internal metal clappers and a wooden ball counterweight mounted to a spring steel holder. Striking the bell gives a vibrating transient percussion effect. Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .125 x 65 x 270mm Weight .................................................. 220g STAND MOUNTING AGOGO BELLS • Available in double or triple configurations Steel percussion bells with shared stem, fixed to a stand-mounting bracket. PERCUSSION | AGOGOS | COWBELLS DRUMMER TAMBOURINE - SINGLE D Single D tambourine in black plastic with integral clamp and reinforced striking edge for mounting over hi-hats or to a cymbal stand. Dimensions . . . . . . . . . . . . . . . 250 x 210 x 50mm Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 420g Stock code Model number 173.788 DT1-BK FLOWER TAMBOURINES Flower shaped ABS tambourines with 8 pairs of twinned jingles and moulded hand grip. Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .210 x 215 x 47mm Weight .................................................. 280g Stock code Model number Colour 173.791 TAMB-FL-PK Pink 173.792 TAMB-FL-BL Blue 173.793 TAMB-FL-RD Red 173.794 TAMB-FL-YW Yellow TAMBOURINES - SINGLE D Coloured plastic D-shape tambourines with 2 x 8 sets of paired jingles and ergonomic grip. Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .238 x 205 x 53mm Weight .................................................. 300g Stock code Model number Colour 173.781 TAMB-SD-WH White 173.782 TAMB-SD-BL Blue 173.783 TAMB-SD-RD Red 173.784 TAMB-SD-OR Orange TAMBOURINES - DOUBLE D Coloured plastic double-D-shaped tambourines with 2 x 10 sets of paired jingles and ergonomic grip. Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .250 x 50 x 220mm Weight .................................................. 360g Stock code Model number Colour 173.761 TAMB-DD-BK Black 173.762 TAMB-DD-BL Blue 173.763 TAMB-DD-RD Red 173.764 TAMB-DD-YW Yellow HEADED TAMBOURINE A wooden ring tambourine with a hide head. Stock code Model number Size Dimensions Weight 173.721 TAMB04H 10cm (4”) 45 x 125mmØ 60g 173.722 TAMB06H 15cm (6”) 45 x 170mmØ 100g 173.723 TAMB08H 20cm (8”) 45 x 220mmØ 200g 173.724 TAMB10H 25cm (10”) 45 x 270mmØ 240g WOODEN TAMBOURINE A wooden circular tambourine with paired jingles. Stock code Model number Size Dimensions Weight 173.751 TAMB04 10cm (4”) 45 x 125mmØ 60g 173.749 TAMB06 15cm (6”) 45 x 170mmØ 90g 173.748 TAMB08 20cm (8”) 45 x 220mmØ 130g 173.747 TAMB10 25cm (10”) 45 x 270mmØ 220g MINI D TAMBOURINE Miniature D shape plastic tambourine with shaped grip and 4 pairs of jingles. Dimensions . . . . . . . . . . . . . . .135 x 115 x 27mm Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60g Stock code Model number Colour 173.771 MTM-PK Pink 173.772 MTM-OR Orange 173.774 MTM-LLC Lilac 173.775 MTM-DBL Dark blue 173.776 MTM-YW Yellow 173.777 MTM-RD Red 173.778 MTM-LB Light blue TAMBOURINES | PERCUSSION Percussion Instruments The Chord range of percussion instruments comprises a wide selection of affordable yet professional quality instruments. The collection covers hand percussion, drum kit add-ons and accessories from ethnic to contemporary styles with an expanded choice of colours and versions to augment this already popular section. Stock code Model number 173.726 VBSLAP Stock code Model number 173.738 AG1 Stock code Model number Pitch Dimensions Weight 173.732 CBL-H High 50 x 110 x 125mm 270g 173.735 CBL-L Low 60 x 130 x 210mm 560g Stock code Model number Pitch Dimensions Weight 173.717 PLB-H High (blue) 50 x 125 x 160mm 370g 173.720 PLB-L Low (red) 50 x 150 x 170mm 530g Stock code Model number Configuration Dimensions Weight 173.736 AG2 Double 85 x 100 x 330mm 490g 173.737 AG3 Triple 85 x 150 x 375mm 630g See page 70 for percussionist stand
15
Embed
Percussion Instruments STAND MOUNTING MINI D TAMBOURINE ...
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
42 43
www.surplustronics.co.nzT 09-8375020 F 09-8375019 E [email protected] items in this catalogue are stocked.
Just search a code on our website. If not listed, feel free to make an inquiry.
COWBELLSMetal cowbells with integral clamp for mounting to drum hardware.
PLASTIC BLOCKSModern version of traditional wood blocks in a hard plastic resin material. Integral clamp and bracket facilitate attachment to various drum hardware.
AGOGOSA set of high and low conical black steel agogo bells held by an angled steel bar.
VIBRA-SLAPA percussionist’s vibra-slap with a wooden bell with internal metal clappers and a wooden ball counterweight mounted to a spring steel holder. Striking the bell gives a vibrating transient percussion effect.
Steel percussion bells with shared stem, fixed to a stand-mounting bracket.
PERCUSSION | AGOGOS | COWBELLS
DRUMMER TAMBOURINE - SINGLE DSingle D tambourine in black plastic with integral clamp and reinforced striking edge for mounting over hi-hats or to a cymbal stand.
Percussion InstrumentsThe Chord range of percussion instruments comprises a wide selection of affordable yet professional quality instruments.
The collection covers hand percussion, drum kit add-ons and accessories from ethnic to contemporary styles with an expanded choice of colours and versions to augment this already popular section.
Stock codeModel number
173.726 VBSLAP
Stock codeModel number
173.738 AG1
Stock code Model number Pitch Dimensions Weight
173.732 CBL-H High 50 x 110 x 125mm 270g
173.735 CBL-L Low 60 x 130 x 210mm 560g
Stock code Model number Pitch Dimensions Weight
173.717 PLB-H High (blue) 50 x 125 x 160mm 370g
173.720 PLB-L Low (red) 50 x 150 x 170mm 530g
Stock codeModel number Configuration Dimensions Weight
173.736 AG2 Double 85 x 100 x 330mm 490g
173.737 AG3 Triple 85 x 150 x 375mm 630g
See page 70 for percussionist stand
44 45
www.surplustronics.co.nzT 09-8375020 F 09-8375019 E [email protected] items in this catalogue are stocked.
Just search a code on our website. If not listed, feel free to make an inquiry.
CHICKEN SHAKES
JINGLE STICK6 sets of tambourine jingles on a moulded plastic handle.
BONGOSA pair of bongos, 6.5” and 7.5” in diameter, with stain-banded finish and chrome hardware. Supplied with tuning key for tuning via standard drum tension rods.
BONGOSA pair of bongos, 6.5” and 7.5” in diameter, with tunable hide heads and a traditional rim. Features black metalwork and a lacquered wood finish. Tuning spanner supplied. Dimensions . . . . . . . . . . . . . . . 420 x 170 x 220mm
Microphones Chord microphones offer uncompromising sound reproduction for applications from vocal recording to general PA.
Chord’s range of drum microphones are ideal for amplifying your percussion instruments, whilst the handheld microphones are suitable for vocals and recording applications.
Wireless microphone systems and in-ear monitoring offer freedom whilst performing, and the different configurations allow a choice of handheld, tie-clip or neckband solutions.
RM55
• High quality vocal capsule• Integral on/off switch
A retro-styled "birdcage" microphone with a polished, cast alloy body and high quality dynamic capsule. Tilt adjustable joint connects to a solid base with on/off switch, integral XLRM connector and 5/8" thread for mounting onto a mic stand. Visual appearance of 1950s cool but with modern audio performance.
• Supplied with mic holder and carry pouch• Presence boost for vocal intelligibility• Rugged metal construction• Wide dynamic range
Professional handheld dynamic microphones for stage and studio use. Voiced to suit both male and female vocals and with a wide bandwidth and dynamic range for instrument applications.
• Wide, even frequency response• Supplied with XLR to jack lead
Dynamic microphone with even frequency response and high SPL tolerance, suitable for percussion, acoustic instruments and female vocals.
Stock code
173.857ABS case included
CM05
• Supplied with mic holder and carry pouch• 22mm gold sputtered diaphragm• Full bandwidth frequency response• High sensitivity for fine vocal detail
Handheld vocal microphone with studio quality gold diaphragm condenser capsule for flawless reproduction of vocal passages and subtle acoustic instruments. Powered by 48V phantom power with a pure class A FET preamp for accurate and noise-free audio delivery.
• Unidirectional, cardioid condenser• Wide frequency response• 10dB attenuator to allow operation at high SPLs• Bass roll off switch• Requires phantom power supply for operation
A pair of miniature cardioid condenser microphones housed in a padded carry case with holders. Their compact size and ultra-high sensitivity makes them ideal for many applications, ranging from overhead drum mics, discrete pick-up in conference and interview situations.
• Hypercardioid response• On/off slide switch• Supplied with XLRF to 6.3mm mono jack lead
High quality dynamic microphone with all-metal, ergonomic construction. Capable of withstanding high SPLs for accurate reproduction of vocals and acoustic instruments.
Stock code
173.855ABS case included
Stock code
173.844
48 49
www.surplustronics.co.nzT 09-8375020 F 09-8375019 E [email protected] items in this catalogue are stocked.
Just search a code on our website. If not listed, feel free to make an inquiry.
TOM/SNARE DRUM MICROPHONE
• Supplied with adjustable 5/8” thread mount
Dynamic microphone for snare drums, toms or other percussion instruments. Microphone can be positioned without compromising the drum striking area.
A dynamic microphone for bass drums or other high sound level percussion instruments. Compact, lightweight and yet still capable of handling very high SPLs.
A pair of compact back electret condenser microphones ideal for overhead use with drum kits, but also great for stereo recording with other acoustic instruments.
• Compact and discreet• Integral 5/8” thread mount
on all microphones• Supplied in an aluminium flight case
A complete 7-piece microphone set for drum kits, comprising a BDM3 bass drum microphone, 4 x TDM3 tom/snare drum microphones and a pair of OCM3 overhead condenser microphones to pick up cymbals and hi-hats.
All have integral 5/8” thread mounts and 4 x DRC2 rim clips are provided for easy and accurate positioning of the TDM3 microphones.
TIE-CLIP MIC | NECKBAND MICS | HEADPHONE AMPLIFIERS | MICROPHONES
4-CHANNEL HEADPHONE AMPLIFIER
• 4 output channels with individual volume level controls• Input jack can be connected to a line level mixer
output or headphone amplifier output• Input/Outputs via 6.3mm stereo jacks• Robust metal case with non-slip rubber end caps• DC input socket and LED power indicator• Supplied with a 6.3mm stereo plug to 2 x RCA phono sockets adaptor• Requires 12Vdc, 200mA power supply (661.400, not supplied)
A compact, low profile unit which provides amplification with individual volume level controls for up to 4 headsets.
• Master volume control• Phone 1 either 6.3mm or 3.5mm jack output• Phone 2 & 3 are 6.3mm jack output• 3.0m Integral lead with RCA phono plugs for connection to audio source• 2 x RCA to 3.5mm stereo adaptor included for connection to a portable stereo
music source or computer• DC input socket with red LED power indicator• Requires mains adaptor 6Vdc, 300mA (661.442, not supplied)
A compact, desk top unit allowing up to three pairs of stereo headphones to be used at the same time. The adaptor allows connection to a portable stereo music source or computer.
www.surplustronics.co.nzT 09-8375020 F 09-8375019 E [email protected] items in this catalogue are stocked.
Just search a code on our website. If not listed, feel free to make an inquiry.
MU-SERIESMIDI/USB CONTROLLER KEYBOARDS
• 5 x keyboard velocity curves (selectable)
• Assignable wheels, slider and rotary controls
• Program editing via note keys• Windows XP/Vista/7 and
Mac OS/X compatible
Controller keyboards with full size velocity-sensitive keys for use with MIDI sound modules or PC/Mac via USB. Designed as a central part of any DAW system and for live MIDI control. USB A to B lead included.
Stock code Model number Keyboard size Keys Dimensions Weight
169.011 MU25 2 octave 25 450 x 225 x 75mm 1.73kg
169.012 MU49 4 octave 49 770 x 225 x 75mm 2.78kg
169.013 MU61 5 octave 61 930 x 225 x 75mm 3.34kg
CONTROL STATION
MICRO MU
MIDI controller with 25-note mini keyboard, 8 velocity sensitive percussion pads, 4 programmable sliders, 4 rotary controls and 8 parameter/settings buttons. A space-saving yet versatile solution for a wide-range of MIDI control applications.
MIDI & Studio Chord MIDI products combine versatile design with consistent performance to sit comfortably with any DAW application or project studio. From feature-packed controller keyboards to audio and MIDI interfaces, the range has got all fields of studio work capably covered.
USB power and plug & play compatibility make these products integrate seamlessly with PC/Mac recording software suites.
SUSTAIN PEDAL
SP2
• Piano design pedal• Works with all keyboards with sustain switch input
The “Dual polarity” changeover switch makes this pedal operate as normally open or normally closed to suit different keyboards. The 2.0m cable is fitted with a 6.3mm standard jack plug.
• Full range speakers• Stereo headphones output• Left + Right line output• Master EQ control
Keyboard amplifiers with 3 stereo line inputs and full-range output. Individual level controls and a shared EQ are easily controlled from the angled front panel. Designed to offer a compact yet powerful back-line or monitor for a multi-keyboard setup.
SUSTAIN PEDAL | KEYBOARD AMPLIFIERS | KEYBOARDS
KB-40 KB-80Stock code 173.451 173.450Power supply 220-240Vac 50Hz (IEC) 220-240Vac 50Hz (IEC)Outputs L+R line output, Headphones out (stereo)Frequency response 50Hz - 16kHz 50Hz - 16kHzInputs 1 x Mic or stereo line, 2 x stereo line 1 x Mic or stereo line, 2 x stereo line, stereo AUXEQ controls Bass, Treble Bass, Middle, TrebleOutput power: RMS 40W 80WSpeaker drivers 200mm (8") woofer + 65mm (2.5") tweeter 300mm (12") woofer + 75mm (3") tweeterDimensions 395 x 395 x 300mm 470 x 525 x 340 mmWeight 12kg 23kg
NEW
52 53
www.surplustronics.co.nzT 09-8375020 F 09-8375019 E [email protected] items in this catalogue are stocked.
Just search a code on our website. If not listed, feel free to make an inquiry.
INTERFACES | AUDIO INTERFACES | CONVERTER LEADS
GUSB1
USBMCUSB-MIDI INTERFACE
• 1 in 1 out MIDI (32 MIDI channels)
• MIDI activity LED indicators
A budget USB to MIDI interface with easy set-up, self-install features. Suitable for most updated operating systems including Win XP, Vista and Mac OS X. Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.8m
AUDIO to USB CONVERTER LEADSAnalogue to digital conversion leads with XLRF or 6.3mm jack connector at one end and USB type A connector at the other, for connecting a line input, instrument or dynamic microphone directly to a PC or Mac computer.
An easy and efficient solution for digital recording of vocal lines, instruments and podcasts.
• Plug-and-play compatibility - Win2000, Mac OSX and above
• Green LED connection indicator
• Integral high resolution A/D converter
COMPACT AUDIO-USB INTERFACE
AUSB2
• Plug-and-play compatibility• USB bus powered
A compact interface with L+R RCA inputs, L+R RCA outputs and an integral USB lead for connecting to PC or Mac computer. Features volume and mute buttons, and a 3.5mm jack microphone input for easy podcast setup.
COMPACT GUITAR-USB INTERFACEA compact interface with 6.3mm guitar input and 3.5mm headphone output to an integral USB lead for connecting to PC or Mac computer. Features volume and mute buttons, and also a “HI/LO” switch for adjusting guitar input level.
Passive Direct Injection box with noise filter to reduce RF interference, pad switch (attenuator) and ground lift option. Professional solution for connecting musical instruments directly to a mixing console.
ACTIVE DI BOX
DI-A1
• Unbalanced high impedance input via 6.3mm jack with parallel output for monitoring
• XLRM balanced output for connection to stage box or mixer
This active DI box converts the high impedance signal from an instrument (guitar, bass, keyboard etc.) to a balanced low impedance one for direct connection to a mixing console. Also features attenuation and ground lift switches.
• High impedance input via 6.3mm jack with link output for monitoring
• XLRM connector is a Lo-Z balanced output for connection to a stage box or mixer
Passive DI box for converting high impedance instrument outputs to low impedance line signals for feeding directly into a mixing console.
DUAL PHANTOM POWER SUPPLY
48V2X
• 2 x XLR inputs and 2 x XLR outputs
• Voltage 12V/48V selector switch with LED indicators
• Power On/Off rocker switch• AC/DC adaptor included
Dual phantom power supply suitable for powering condenser microphones. Output voltage 12/48V (switchable) with ground lift option. Supplied with a 15Vdc 300mA AC/DC adaptor.
4-CHANNEL MICROPHONE MIXER
MM4
• Housed in a sturdy metal case with master volume control
• Optional DC Power supply - 661.300 (not supplied)
A mono mixer with 4 x 6.3mm jack microphone inputs and 1 x 6.3mm jack master output, each with separate volume control.
• Foldable tripod legs• Height adjustable neck support• Foam rubber protectors to avoid surface marking of guitar• Accommodates electric and acoustic guitars• Robust tubular metal construction finished in black
Portable, foldable guitar stands with neck support.
Stock code Model number Version Height adjustment Weight
180.170 GS-4 1 way 650 - 800mm 1.73kg
180.171 GS-2 2 way 530 - 800mm 2.78kg
180.160 GS-3 3 way 780 - 910mm 3.34kg
A-FRAME SLIM GUITAR STAND
• Suitable for both electric and acoustic guitars• Clip bar at base to hold stand open• Rubberised supports to avoid
damage to instrument
A slim, foldable A-frame stand for acoustic or electric guitars with rubberised frame to avoid damage to the instrument.
• Suitable for both electric and acoustic guitars• Simple latching mechanism to hold stand open• Rubberised supports to avoid
damage to instrument
A foldable A-frame stand for acoustic, electric or bass guitars. Contoured forks hold either slim electric or deep acoustic guitar bodies in place, while rubberised supports avoid damage to the instrument.
• Music holder is detachable when not required• Rubberised contact points to protect guitar finish
A combination guitar and music stand with neck support and completely foldable design. The neck support and sheet music holder are both height adjustable.
www.surplustronics.co.nzT 09-8375020 F 09-8375019 E [email protected] items in this catalogue are stocked.
Just search a code on our website. If not listed, feel free to make an inquiry.
STANDS | GUITAR STANDS & MOUNTS
BACKREST GUITAR STANDSFoldable stands for guitar or bass guitar which secure the instrument by the base of the headstock allowing the back of the instrument’s body to rest against a foam covered backrest bar.
Stock code Model number VersionDimensions (assembled) Weight
180.141 BGS1 Single 880 x 660mmØ 1.36kg
180.142 BGS2 Dual 890 x 600mmØ 1.53kg
180.143 BGS3 Triple 900 x 600mmØ 1.72kg
ADJUSTABLE GUITAR AMPLIFIER STANDBlack steel guitar amplifier stand with adjustable height.
MULTI-GUITAR RACK STANDSRack stands for guitars or bass guitars. Generous spacing means that a combination of electric and acoustic guitars can be stood side by side. Foam covered supports give protection to the instruments. A space saving and easy to transport solution for studios, home or gigs.
Stock code Model number VersionDimensions (assembled)
Dimensions (folded) Weight
180.168 GS-R3 3 way 730 x 450 x 400mm 730 x 450 x 150mm 2.8kg
180.167 GS-R5 5 way 730 x 630 x 400mm 730 x 630 x 150mm 3.3kg
180.169 GS-R7 7 way 730 x 830 x 400mm 730 x 830 x 150mm 3.8kg
COMPACT GUITAR WALL HANGERWall bracket with pivoting neck holder.
• Foam covered supports to protect finish• Drop-gate on neck support for security• Suitable for unusual shaped guitars
since the body does not rest on its base
RETAINER BAND FOR GUITAR WALL HANGERRubber retainer band to secure a guitar in wall brackets or stands.
Stock codeModel number
180.172 STANDBAND
• Suitable for 180.170, 180.171, 180.173 and 180.175
KEYBOARD STANDS | STANDS
• Mount for optional mic boom (180.065)• Fully foldable, portable design• Angled cantilever support• Twist-lock arm height adjustment• Cable management clips• Transit bag included
OBELISK DUAL KEYBOARD STANDHigh quality triangular column keyboard stand with 2 pairs of folding support arms, a T-shaped base and 3/4in thread on top for supporting an optional microphone boom arm or gooseneck. Each pair of support arms is height-adjustable and has anti-slip coating to grip the bottom of the keyboard. 3 legs forming the base can fold and lock inside the lower part of the column, making for easy storage and portability within the included carrying bag.
Adjustable Z frame stand for seated or standing keyboard players. Can also be used for DJ equipment (i.e. coffin cases) or mixing consoles. Constructed from heavy duty square tubing with height and width adjustment.
Microphone holder for large recording microphones with sprung cradle suspended by elastic retainers. Standard 5/8" screw fixing with adaptor for 3/8" thread.
• Supplied with iPad and iPad2 adaptors• Secure and durable design with sure-grip touch points• Universal clips attach to most
microphone stands and work surfaces• Multi-mount design provides horizontal
and vertical positioning of your iPad
iPad is a registered trademark of Apple Inc.
This adjustable mount for iPads features connecting attachments for securing to a microphone stand or a work surface. Applications include auto-cue for narrators and music scores for live performance and practice.
Padded transit bag with foam block holding up to 6 microphones and an adjacent segmented section for leads and other equipment. An additional 2-section outer pocket is included for accessories and a strong handle and shoulder strap aid portability.
Padded transit bag for wireless system or other equipment with segmented foam interior, allowing sections to be removed to accommodate specific shapes.
An additional 2-section outer pocket is included for leads and other accessories and a strong handle and shoulder strap aid portability.
Stock code Model number Capacity External dimensions Internal dimensions Weight
127.168 ABS:MIC6 6 microphones 330 x 340 x 300mm 310 x 325 x 270mm 2.5kg
127.170 ABS:MIC12 12 microphones 440 x 340 x 300mm 410 x 325 x 270mm 2.8kg NEW
RACK BAGS• Sturdy internal wooden frame• Rack strip front and rear• Securing straps inside flaps• Zipped external pocket
19” rack case in a padded bag with front and rear flaps for access and ventilation. Equipment is protected by an inner wooden frame and secured by metal rack strip front and rear.
Stock code Model number Size Dimensions Weight
127.146 RACKBAG2U 2U 550 x 380 x 165mm 3.66kg
127.147 RACKBAG3U 3U 550 x 380 x 210mm 4.26kg
127.148 RACKBAG4U 4U 550 x 380 x 250mm 4.86kg
Stock code Model number Size Dimensions Weight
127.186 RACKBAG2US 2U 550 x 165 x 240mm 2.25kg
127.187 RACKBAG3US 3U 550 x 210 x 240mm 2.65kg
127.188 RACKBAG4US 4U 550 x 250 x 240mm 2.9kg
• Sturdy internal wooden frame• Rack strip front and rear• Securing straps inside flaps• Zipped external pocket
19" rack case in a padded bag with front and rear flaps for access and ventilation. Equipment is protected by an inner wooden frame and secured by metal rack strip front and rear. Also fitted with carrying handle, shoulder strap and zipped outer pocket.
SHALLOW 19" RACK BAGS
RACK BAGS | BAGS & CASES
Rack stands for 19” equipment on page 73
62 63
www.surplustronics.co.nzT 09-8375020 F 09-8375019 E [email protected] items in this catalogue are stocked.
Just search a code on our website. If not listed, feel free to make an inquiry.
LeadsElite SeriesManufactured to strict tolerances using high grade pure copper signal cable with flexible, soft texture PVC sheath and cotton reinforcement to avoid tangling. Fitted with premium grade connectors.
Classic SeriesHigh grade cable comprises 2 insulated pure copper cores and global shielding. The durable PVC sheath has a soft texture and is reinforced with cotton cord to avoid tangling. Terminated with high quality connectors.
PROFESSIONAL XLR STAGE BOXESBalanced, screened multi-core stage snake cable for feeding multiple audio signals between stage and control area. XLR sends and returns feed from a stage box to numbered break-out leads at the console end. Fitted with a rugged metal stage box and steel draw loop to facilitate cable running.
Stock code Model number Sends + Returns Mic Channels Lead Length Dimensions - Packed Weight
173.908 SB8:30 8 8 x XLR sockets 30m 440 x 320 x 260mm 8.0kg
173.902 SB8:4:30 8 + 4 8 x XLR sockets 30m 460 x 400 x 250mm 12.0kg
173.904 SB12:4:30 12 + 4 12 x XLR sockets 30m 460 x 400 x 250mm 15.0kg
173.907 SB16:4:30 16 + 4 16 x XLR sockets 30m 460 x 400 x 250mm 18.0kg
173.910 SB24:4:30 24 + 4 24 x XLR sockets 30m 470 x 430 x 330mm 26.0kg
173.913 SB24:4:50 24 + 4 24 x XLR sockets 50m 500 x 500 x 330mm 42.0kg
XLR MULTI-CORE REEL 8:4
• Moulded retractable reel with integral handle• Numbered connectors for identification• Balanced connections
A stage snake cable built into a convenient moulded reel housing.