PENGARUH PENGELASAN ARGON TERHADAP SIFAT MEKANIK BAJA STAINLESS STEEL 304 Tugas Akhir Disusun Untuk Memenuhi Syarat Kurikulum Untuk Menyelesaikan Program Pendidikan Strata 1 Pada Program Studi Teknik Mesin Oleh : Muhammad Ghozi Badri (1602220042) Fakultas Teknik Universitas Tridinanti Palembang 2020
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
PENGARUH PENGELASAN ARGON TERHADAP
SIFAT MEKANIK BAJA STAINLESS STEEL 304
Tugas Akhir
Disusun Untuk Memenuhi Syarat Kurikulum Untuk Menyelesaikan
Program Pendidikan Strata 1 Pada Program Studi Teknik Mesin
Oleh :
Muhammad Ghozi Badri
(1602220042)
Fakultas Teknik
Universitas Tridinanti Palembang
2020
iii
ABSTRAK
Stainless steel merupakan baja paduan tinggi karena unsur crom (Cr)
mencapai 20% stainless steel juga mempunya keunggulan yaitu tahan korkosi,
tahan oksidasi pada temperature tinggi, banyak dipakai pada perusahaan makanan
atau minuman dan mempunyai hardenability yang tinggi.
Tujuan penelitian ini untuk mengetahui hasil pengelasan TIG (Tungsten
Inert Gas) dengan nilai dari uji tarik pada baja Stainless Steel 304. Penelitian ini
juga untuk mengetahui pengaruh variasi arus pengelasan terhadap kekuatan tarik
dan kekerasan pada baja stainless steel 304. Metode penelitian yang dipakai
dengan mengatur variasi arus mulai dari 60 A, 80 A dan 100 A untuk kawat
elektroda yang digunakan adalah NSN-308 LR diameter 2,4 mm. kampuh yang
dipakai yaitu kampuh V dan material yang digunakan yaitu baja SS 304.
Hasil dari pengelasan kemudian dilakukan uji tarik dan uji kekerasan. Hasil
dari penelitian menunjukan kekuatan tarik terbesar didapatkan pada specimen
pengelasan dengan arus 60 ampere yaitu sebesar 534,328. Hal ini terjadi karena
proses pemanasan selama pengelasan.
Nilai kekerasan tertinggi pada daerah HAZ didapat pada specimen dengan
arus pengelasan 100 Ampere. Karena pada arus 100 A terjadi pemanasan yang
paling tinggi dibandingkan dengan arus yang lain.
Kata Kunci : Baja Stainless Steel 304, Uji Tarik, Uji Kekerasan, Las TIG.
iv
ABSTRACT
Stainless steel is a high alloy steel because the chromium (Cr) element
reaches 20%. Stainless steel also has advantages, namely corrosion resistance,
oxidation resistance at high temperatures, is widely used in food or beverage
companies and has high hardenability.
The purpose of this study was to determine the results of the TIG (Tungsten
Inert Gas) welding with the value of the tensile test on 304 stainless steel. This
study was also to determine the effect of variations in welding current on tensile
strength and hardness of 304 stainless steel. Current variations ranging from 60 A,
80 A and 100 A for the electrode wire used are the NSN-308 LR with a diameter
of 2.4 mm. The seam used is seam V and the material used is SS 304 steel.
The results of the welding are then subjected to a tensile test and hardness
test. The results of the study showed that the greatest tensile strength was found in
welding specimens with a current of 60 amperes, namely 534.328. This happens
because of the heating process during welding.
The highest hardness value in the HAZ area was obtained in specimens with
a welding current of 100 Ampere. Because at current 100 A, the heating is higher