Pekkaniska Heavy Lifting

PROJECT SERVICES AND HEAVY LIFTING

Pekkaniska is an expert on special and heavy lifting

We offer you solutions for your heavy lift challenges. Pekkaniska performs dozens of special liftings every year. We have the expertise and experience to perform even the most challenging lifting works.

Every lift is studied and engineered with precision to make sure that your valuable loads find their place safely and cost effectly. Detailed rigging plans are made to complete the lifting studies. Pekkaniska values safe working methods. Our cranes are state of the art and equipped with most modern safety devices.

No matter what you are lifting, we can ensure that the result is perfect. Pekkaniska is your flexible partner in special lifting.

Raahe, Finland

Pekkaniska is the most reliable partner when installing wind power systems

The use of wind power is increasing rapidly due to increasing interest in environmental issues and demand for greener, environmentally friendly energy. Modern wind power parks are being set up, and windmills being installed to generate electrical energy. The development of ever more powerful wind power systems is continuing and the height of towers on which the systems are mounted is increasing. Pekkaniska is meeting these challenges with its Liebherr cranes with an optimised performance and new jib systems designed to meet the needs of wind power industry. Most modern fleet, competent staff and high quality of work are Pekkaniska’s trademarks which have ensured us a leading position in heavy lifting in Scandinavia, Russia and the Baltics.

Uljabuouda, Sweden

Palvelut

PalvelutPekkaniska’s Services

With the help of our service partner network we offer also:

Lifting

Pekkaniska cranes is a wide known concept all over Northern and Eastern Europe. We can help you with any of your lifting needs from the smallest loads up to the heaviest and most complicated lifting projects. Careful engineering and our modern fleet ensure the safest and most cost effective solution for any lifting job. Our versatile crane fleet includes several solutions for specialized lifting.

Logistics

If you need to complete your lifting project with logistics services. From top of the mountain to bottom of the sea. We can offer you complete door to door logistic services. We can arrange complete logistics chain from factory to work site even for the most complicated destinations.

Installation

Together with our lifting services we can also offer you installation services. Mechanical installation and electrical works can also be added in to our scope of your project. We have experience especially from petrochemical plants and wind power stations. Together with carefully selected partners we can help you with most of your installation needs.

Uljabuouda, Sweden

What we promise, we deliver.

Access Platforms

Pekkaniska has a wide selection of more than 7 000 platforms to choose from! Aerial lifts offer huge productivity gains over ladders and scaffolding. Whether for construction or maintenance, lifts enable trained operators to reach everything that’s up in the air. With our tallest access platforms you can reach up to heights of over 100 meters.

LIEBHERR LG 1750The LG 1750 is a 750 ton lattice boom crane with an 8-axle chassis, cruciform support and a variable boom system. It is designed as a heavy duty crane for versatile operational conditions.

LG 1750 is the most versatile crane for wind power installations. It is extremely fast to move from one turbine to another.

LG 1750 lattice-boom mobile crane combines the flexibility of a 750-tonne crawler crane with the mobility of a fast-moving truck crane from the same load category. Four extremely rigid, folding arms of generous size make up the starpattern supports which have a base area of 16 x 16 m. Crane can also be used in 12 x 12 m mode in limited surroundings.

This crane can be equipped with a longer boom system without having to use a derrick system for boom erection.

MOBILE CRANES

Klågerup, Sweden

8

Technical data LG 1750

Crane type

Max. lifting capacity

Main boom type

Main boom length

Lattice jib

At radius

Max. lifting height

Max radius

Number of axles

Mobile crane

750 t

Lattice

21 - 140 m

14 - 105 m

7 m

193 m

136 m

8

Klågerup, Sweden

Hardstandto hardstand

in a day

MOBILE CRANES | 9

LIEBHERR LTM 1500-8.1The eight-axle LTM 1500-8.1 is equipped with a 7-section, 84 m telescopic boom. The lifting capacities are increased considerably due to the jib-suspension. The lattice jib, reaching lengths of up to 91 m, extends the operating range of the 500-tonner to 145 m hoisting height and 108 m reach.

LTM 1500-8.1 is the standard crane for the erection of wind power systems of the 1,5 MW class on towers up to more than 80 m high. It is especially handy when erecting concrete towers.

LTM 1500-8.1 has a multivariable boom system. The 50 m long telescopic boom can be extended to 84 m using only three additional telescopic sections.

8 | BIG CRANES10 | MOBILE CRANES

“I really enjoy operating with power-ful and most modern crane technology. Pekkaniska provides extensive training which continues throughout the working career. ”

Ossi Jahn, crane operator, Pekkaniska Oy

Vantaa, Finland

Crane type


Main boom type

Main boom length

Lattice jib

Telescopic boom

Carrier engine/output

Drive / steering

Travel speed

Operational weight

Total counterweight

Mobile crane

500 t

Telescopic

84 m

6 - 91 m

16.1 - 84 m

Liebherr, 8-cylinder, turbo-Diesel, 500 kW

16 x 8 x 12

80 km / h

96 t

165 t

Technical data LTM 1500-8.1

BIG CRANES | 7MOBILE CRANES | 11

Vuosaari Harbour, Helsinki, Finland

84 m telescopic

boom

LIEBHERR LTM 1400-7.1The seven-axle mobile crane LTM 1400-7.1 is the most compact representative of its class, and extraordinarily manoeuvrable due to the new active rear axle steering. Comprehensive electronics in the travel drive and in the crane control ensures increased safety, easy-to-use operation and a high availability of the 400 tonner. Hoisting heights of up to 122 m and a reach of up to 92 m characterise the range of applications.

The LTM 1400-7.1 is the optimum mobile crane for installationof 1 MW class wind power systems on towers up to approximately 70 m high. Smaller systems can be mounted on correspondingly higher towers.

The LTM 1400-7.1 is the most compact crane in its class. This makes it perfectly suitable for the erection of wind power systems in mountain and coastal regions.

12 | MOBILE CRANES

Vantaa, Finland

Crane type


Main boom type

Main boom length

Lattice jib

Telescopic boom


Drive / steering

Travel speed

Operational weight

Total counterweight

Mobile crane

400 t

Telescopic

60 m

7-84 m

15.4 - 60 m


14 x 8 x 14

80 km / h

84 t

140 t


MOBILE CRANES | 13

Pori, Finland

Most wanted crane for

wind turbine service

LIEBHERR LTM 1250-6.1

Navapolatsk, Belarus

With 72 m boom

14 t lifting capacity!

The six-axle mobile crane LTM 1250-6.1 sets new standards in versatility in the 250 t class. In the vertical position, the 6-section, 72 m telescopic boom features a lifting capacity of 14 t.

Modular-mounted data bus technology ensures greater cost-effectiveness and considerably improved operating safety in the travel drive and crane drive.

Crane type


Main boom type

Main boom length

Lattice jib

Telescopic boom


Drive / steering

Travel speed

Operational weight

Total counterweight

Mobile crane

250 t

Telescopic

72 m

6 - 70 m

15.5 - 72 m


12 x 8 x 10

80 km / h

72 t

97.5 t

14 | MOBILE CRANES


LIEBHERR LTM 1200-5.1

” Sie können sich auch auf Deutsch an uns wenden!

Rufen Sie uns einfach an oder senden Sie uns eine Email.“

Kristian Jäger, Account Manager, Pekkaniska Oy

Kiaby, Sweden

Crane type


Main boom type

Main boom length

Lattice jib

Telescopic boom


Drive / steering

Travel speed

Operational weight

Total counterweight

Mobile crane

200 t

Telescopic

72 m

6 - 43 m

13.2 - 72 m


10 x 8 x 10

80 km / h

60 t

74 t

The new LTM 1200-5.1 is the mobile crane with the longest telescopic boom on the market in the 5-axle class. The 7-section, 72-metre-long telescopic boom can furthermore be extended with a 7-metre lattice jib and a swing-away jib up to 36 metres in length. The new 200-tonner’s performance is marked by its outstanding lifting capacities.

MOBILE CRANES | 15


LIEBHERR LR 11350

CRAWLER CRANES

When traditional cranes are not high or heavy enough, you‘ll need LR11350.

The LR 11350 sets standards in the class for cranes capable of lifting over 1000 tonnes. It offers outstanding lifting capacities in all applications. The design principle enables economical and straightforward transportation of the crane components and rapid set-up. The diesel engine, hydraulics, electrics and crane cab are transported as a complete unit. A wide range of boom systems mean that the LR 11350 is highly versatile with or without a derrick system. Its performance is complemented by excellent safety standards and a high level of operating convenience.

The 1,350 t crawler crane has an overall system length of 228 m, which requires the combination of main jib and luffing fly jib each114 m in length. This provides a maximum height under hook of 223 m. Because of the conventional A-frame design principle, the LR 11350 can, when mechanical outriggers are used, achieve main boom system lengths of up to 102 m without the need for derricking. With derricking, main boom lengths are up to 150 m.

Ehingen, Germany

Crane type


Max. load moment

Main boom

Lattice jib

Derrick mast

Superstructure-/ central ballast

Derrick ballast

Engine output

Travel speed

Total counterweight

Crawler crane

1350 t

22.748 tm

30 - 150 m

12 - 114 m

42 m

340 t / 30 t

660 t

641 kW

0 - 1.08 km/h

990 t

16

Technical data LR 11350

Ehingen, Germany

CRAWLER CRANES | 17

LIEBHERR LR 1750The crawler crane LR 1750 is perfectly suited for applications in power stations, refineries, bridge construction sites and the assembly of wind power plants. The 750-t machine can be uni-versally applied due to its 140 m main boom, 105 m luffing fly-jib, 21 m assembly jib and derrick attachment, as well as 400 t suspended counterweight or ballast trailer. Compact dimensions of the crane components and moderate individual weights allow a highly economic transport of the crane to the building site. The 750 ton crane can also be operated as a “Pedestal Crane” with outrigger supports, featuring a support base of 13 x 13 m. Lifting capacities can thus be increased by up to 370%.

Pekkaniska’s LR1750 fleet is also equipped with 6 meter long HS boom head, especially used in wind power installations.

18 | CRAWLER CRANES

Uljabuouda, Sweden

Crane type


Max. load moment

Main boom

Lattice jib

Derrick mast


Derrick ballast

Engine output

Travel speed

Total counterweight

Crawler crane

750 t

9.640 tm

21 - 140 m

14 - 105 m

31.5 m

245 t / 95 t

400 t

400 kW

0 - 1.65 km/h

720 t


CRAWLER CRANES | 19

Moscow, Russia

LIEBHERR LR 1600The crawler crane LR 1600/2 is convincing by its outstanding capacities, variable boom and derrick systems as well as by its optimized component dimensions for economical transportation.

With the custom-made boom system the LR 1600/2 is ideal and suited for applications in power stations, refineries, bridge construction sites and the assembly of wind power plants.

20 | CRAWLER CRANES

”My responsibility is engineering for heavy and special lifting projects. Careful planning increases safety and saves costs and efforts for the best of our customers.”

Tuomas Hanni, Lift Planning Engineer, Pekkaniska Oy

Nordstream project, Vyborg, Russia

Crane type


Max. load moment

Main boom

Lattice jib

Derrick mast


Derrick ballast

Engine output

Travel speed

Total counterweight

Crawler crane

600 t

8.232 tm

24 - 144 m

12 - 96 m

30 - 36 m

190 t / 65 t

350 t

370 kW

0 - 1.36 km/h

565 t


CRAWLER CRANES | 21

Nordstream project, Vyborg, Russia

LIEBHERR LR 1600/2-WNarrow track

The LR 1600/2-W, narrow track, with its slim crawler travel gear, is ideally designed for operations in wind parks, being able to move fully equipped on the tracks between the installation locations of the individual wind power systems. The crane is supported for carrying out lifting work.

This machine needs only 6 m wide roads for crawling between turbines.

Pekkaniska’s LR1600 fleet is also equipped with normal tracks for more traditional lifting works.

22 | CRAWLER CRANES

Arjeplog, Sweden

For full set-up crawling

only 5,8 m needed!

Crane type


Max. load moment

Main boom

Fixed lattice fly jib

Derrick mast


Derrick ballast

Engine output

Travel speed

Total counterweight

Crawling width

Crawler width

Crawler crane

(narrow track)

600 t

8.085 tm

24 - 144 m

12 - 36 m

30 - 36 m

190 t

350 t

370 kW

0 - 1.36 km/h

500 t

5.8 m

2 m -> widely distriputed ground pressure

Technical data LR 1600/2-W

CRAWLER CRANES | 23

Arjeplog, Sweden

Wstands for

wind turbines

LIEBHERR LR 1350/1The crawler crane LR 1350/1 features state-of-the-art drive and control technology, light in weight boom systems with high lifting capacities, cost-effective upgrading and transport logistics and is perfectly adapted for easy transport. The operational spectrum is characterised through 120 m hook height with main boom, 150 m working height with fly-jib and up to 104 m overall reach. A significant increase in lifting capacity is realised for the 350-t machiner through Derrick boom and ballast trailer.

With Liebherr’s new reinforced S3HS boom system this crane can assemble most of the 2-2,5 MW class turbines up to 100 m towers. In this turbine class, LR 1350/1 is the most cost effective crane.

With the extremely compact dimensions of the basic unit and a minimum transport weight of 40 t without winches the basic machine can move anywhere in the world without restrictions and can be self-erected using optimum accessories.

24 | CRAWLER CRANES

Navapolatsk, Belarus

Technical data LR1350/1

Crane type


Max. load moment

Main boom, light/heavy

Lattice jib

Derrick mast


Derrick ballast

Engine output

Travel speed

Total counterweight

Crawler crane

350 t

4.084 tm

18 - 120 m

24 - 90 m

27 m

125 t

210 t

270 kW

0 - 1.63 km/h

373 t

Technical data LR 1350/1

CRAWLER CRANES | 25

Kreivenai, Lithuania

Transportweight

only 40 t

LIEBHERR LR 1300 SX/W

Crane type


Main boom, light/heavy

Luffing jib

Fixed jib

Max. combination


Derrick ballast

Engine output

Max. winch line pull 1. layer

Travel speed

Crawler crane

(narrow track)

300 t

120 / 98 m

113 m

35 m

172 m

124 / 57 t

max. 120 t

450 kW

215 kN

max 1.63 km/h

Due to their high level of mobility and excellent performance the wide range of possible applications starts with the common lifting and assembly jobs and ends with smaller clamshell and dragline applications. The Liebherr crawler cranes come up with outstanding advantages like superior load charts in most configurations, variety of possible configurations, quick and easy assembly, practical and cost-effective transportation, state of the art electronic system (based on CANBUS technology) including most modern power train management, online calculation of the maximum working load, high safety through redundant safety systems and high quality trough many proven specifications inherited from strong duty cycle crawler cranes. To further enhance the load capacities of the LR 1300 also a derrick system as well as a suspended counterweight is available.

The 300-tonne narrow-track crawler crane for wind-power farms. It has a 4.8 m wide crawler chassis and can be driven on the site roads in the narrow crawler mode. This narrow-track version complies with the need for efficient lifting devices to construct wind-driven turbines at wind-power farms.

Pekkaniska’s crane is offered with special wind power boom (SX). Crane can be equipped with 8 m fixed jib for wind power applications. This is very cost effective and fast crane. LR1300 has also derrick system and suspended ballast for heavy lifting.

26 | CRAWLER CRANES

Narrow track

Benaiciai, Lithuania

Technical data LR 1300 SX/W

CRAWLER CRANES | 27

Benaiciai, Lithuania

For full set-up crawling

only 4,8 m needed!

MOBILE CRANES

Machine Lifting Hydraulicboom Additionalboom Transport Transport Transport Support

capacity length length length width height area

LiebherrLG1750 750t 140m* 105m 18,95m 3,00m 4,00m 16,00x18,50m

LiebherrLTM1500-8.1 500t 50m/84m 7/91m 20,97m 3,00m 4,00m 10,01mx9,60m

LiebherrLTM1400-7.1 400t 60m 7/84m 18,45m 3,00m 3,90m 9,50x10,00m

LiebherrLTM1250-6.1 250t 72m 5,4/70m 17,41m 3,00m 4,00m 8,84x8,50m






LiebherrLTM1050-3.1 50t 38m 9/16m 11,83m 2,54m 3,84m 7,15x6,40m

LiebherrLTM1040-2.1 40t 35m 9,5/9,5m 10,52m 2,50m 3,42m 6,00x6,28m

* Lattice boom

Khabarovsk, Russia

Helsinki, Finland

Tallinna, Estonia Syzran, Russia

28 | ALL CRANES

Machine Lifting Mainboom Additional Operating Operating Support

capacity length boomlength length width area

LiebherrLR11350 1350t 150m 114m 15,65m 13,00m 14,50x13,00m

LiebherrLR1750 750t 140m 105m 16,60m 10,30m 11,90x10,30m

LiebherrLR1600/2 600t 144m 96m 10,96m 10,40m 10,90x10,40m

Liebherr1600/2W 600t 144m 36m 10,96m 5,80m 16,00x16,00m

LiebherrLR1350/1 350t 120m 90m 8,40m 8,40m 9,70x8,40m

LiebherrLR1300SX 300t 98m 113m 9,65m 4,8-8,0m 9,65x8,00m

HitachiSCX1200-2 120t 72m 28m 10,00m 6,37m 7,91x6,37m

LiebherrLTR1100 100t 52m 19m 13,14m 3,50/5,05m6,41x5,05/3,50m

CRAWLER CRANES

Aulepa, EstoniaPerm, Russia

Riga, Latvia

Narva, Estonia

ALL CRANES | 29

Nacelle height LTM1400-7.1 LTM1500-8.1 LR1300SX/W LR1350/1 LR1600/2 LR1600/2-W LR1750 LG1750 LR1135060 m TYSN

T48,3 A 4 N 21 w: 46,5 t, r:16 m HH: 68 m

T6Y3T68,2 w:66 t, r:16 m HH: 67 m

TY3SNT42, 1 A4 N28 w: 78 t, r: 18 m HH: 72 m

SXW + 8 m jibS 65 m F 8mW: 83t, r: 16m HH: 70 m

SXW + Derrick + 8 m jibS 65 m F 8 m DW: 114 t

S3HSS3 72 m HS4,5m w: 90 t, r: 14 m HH: 74 m

SDWBWS36 W36 D w: 112 t, r: 18 m HH: 74 m

SLFSL 66m F12m w: 137 t, r: 16m HH: 74 m

SLFSL 66 m F12m w: 137 t, r: 16m HH: 78 m

SLSL 77m w: 172 t, r: 18 m HH: 76 m

SLSL 77m w:195 t, r: 18 m HH: 77 m

80 m TYSNT48,3 A 4 N 42 w: 27,5 t, r:22 m HH: 88 m

TY3SNT47, 3 A4 N42 w: 56 t, r: 24 m HH: 90 m

SXW + 8 m jibS 83 m F 8 mW: 67,5 t, r: 16 mHH: 89 m

SXW + Derrick + jibS 83 m F 8 m DW: 87,5 t, r: 16 mHH: 89 m

S3HSS 90 m HS4,5m w: 83 t, r: 14 m HH: 92 m

S3DHSs90m HS4,5m w: 82 t, r: 16 m HH: 92 m

S3DHSBWS3 90 m HS4,5mw: 86 t, r: 16 m HH: 92 m

SLFSL 78m F18m w: 88 t, r: 20 m HH: 93 m

SL3FSL81 m F12 m w: 124 t, r: 18 mHH: 90 m

SL4DFSL 84 m F 12 mw: 126 t, r: 18 mHH: 92 m


SL3FSL81 m F12 m w:132 t, r: 18 mHH: 92 m


SL8HSSL 84 m HS 6 mw: 117 t, r: 16 mHH: 89 m

SWS 56 m W 42 mw: 150 t, r: 20 mHH: 96 m

SL8HSSL 84 m HS 6 mw:120 t, r 16 mHH:90 m

100 m S3DHSS108m HS4,5mw: 68 t, r: 16 mHH:110 m

S3DHSBWS108m HS4,5mw: 69 t, r: 20 mHH:108 m

SL3FSL 105 m F 12 mw: 105 t, r: 18 mHH: 114 m


SL4DFBSL 108 m F 12 mw: 127 t, r: 18 mHH: 117 m






SWS63 m W 49 mw: 140 t, r: 20 mHH: 111 m

SDWVBWS 91 m WV 21 mw: 170 t, r: 20 mHH: 110 m

SL8HSSL 105 m HS 6 mw: 120 t, r 16 mHH:110 m

SWS 63 m W 49 mw: 148t, r 20 mHH:113 m

S6D2BS 112mw: 218 t, r: 26 mHH: 111 m

SDWVBS 91m WV 21m w: 182 t, r: 20 mHH: 113 m

SDWVBS 98 WV18w: 402 t, r: 24 mHH: 110 m

SDWVBs 102 m, r:22 mw: 410 t, r: 22 mHH: 111 m

120 m SL2DFBSL 128 m F 12 mw: 95 t, r: 20 mHH: 135 m

SL4DFBSL 128 m F 12 mw: 99 t, r: 20 mHH:135 m






SDWBWS 70 m W 63mw:99 t, r:24 mHH:131 m

SDWBWS 77 m W 63mw: 88 t, r: 25 mHH: 138 m

SL8DHSSL 126 m HS 6 mw: 92 t, r: 26 mHH: 129 m

S6D2WBS 70m W 70mw: 96 t, r: 25 mHH:140 m



SW2S 60 m W 78 mw: 150 t, r: 29 mHH:132 m

SDWVBS 114 m WV 12 mw: 327 t, r: 26 mHH: 124,5 m

SDWVBS 114 m WV 18 mw: 286 t, r: 26 mHH: 130 m





SDWBWS 84 m W 70 mw: 68 t, r: 26 mHH: 152 m


SL9D2FBSL 136,5 m F 18 mw: 100 t, r: 30 mHH: 152 m

SDWBS 72 m W 84 mw: 157 t, r: 28 mHH:153 m

160 m SDWBS 91 m W 84 mW: 44,5 t, r: 32 mHH:174 m

SDWBS 90 m W 84 mW: 132 t, r: 30 mHH:174 m

Pekkaniska’s cranes for wind turbine

30 | SUMMARY

Nacelle height LTM1400-7.1 LTM1500-8.1 LR1300SX/W LR1350/1 LR1600/2 LR1600/2-W LR1750 LG1750 LR1135060 m TYSN

T48,3 A 4 N 21 w: 46,5 t, r:16 m HH: 68 m

T6Y3T68,2 w:66 t, r:16 m HH: 67 m

TY3SNT42, 1 A4 N28 w: 78 t, r: 18 m HH: 72 m

SXW + 8 m jibS 65 m F 8mW: 83t, r: 16m HH: 70 m

SXW + Derrick + 8 m jibS 65 m F 8 m DW: 114 t

S3HSS3 72 m HS4,5m w: 90 t, r: 14 m HH: 74 m

SDWBWS36 W36 D w: 112 t, r: 18 m HH: 74 m

SLFSL 66m F12m w: 137 t, r: 16m HH: 74 m

SLFSL 66 m F12m w: 137 t, r: 16m HH: 78 m

SLSL 77m w: 172 t, r: 18 m HH: 76 m

SLSL 77m w:195 t, r: 18 m HH: 77 m

80 m TYSNT48,3 A 4 N 42 w: 27,5 t, r:22 m HH: 88 m

TY3SNT47, 3 A4 N42 w: 56 t, r: 24 m HH: 90 m

SXW + 8 m jibS 83 m F 8 mW: 67,5 t, r: 16 mHH: 89 m

SXW + Derrick + jibS 83 m F 8 m DW: 87,5 t, r: 16 mHH: 89 m

S3HSS 90 m HS4,5m w: 83 t, r: 14 m HH: 92 m

S3DHSs90m HS4,5m w: 82 t, r: 16 m HH: 92 m

S3DHSBWS3 90 m HS4,5mw: 86 t, r: 16 m HH: 92 m


SL3FSL81 m F12 m w: 124 t, r: 18 mHH: 90 m



SL3FSL81 m F12 m w:132 t, r: 18 mHH: 92 m



SWS 56 m W 42 mw: 150 t, r: 20 mHH: 96 m

SL8HSSL 84 m HS 6 mw:120 t, r 16 mHH:90 m

100 m S3DHSS108m HS4,5mw: 68 t, r: 16 mHH:110 m

S3DHSBWS108m HS4,5mw: 69 t, r: 20 mHH:108 m









SWS63 m W 49 mw: 140 t, r: 20 mHH: 111 m

SDWVBWS 91 m WV 21 mw: 170 t, r: 20 mHH: 110 m

SL8HSSL 105 m HS 6 mw: 120 t, r 16 mHH:110 m

SWS 63 m W 49 mw: 148t, r 20 mHH:113 m

S6D2BS 112mw: 218 t, r: 26 mHH: 111 m

SDWVBS 91m WV 21m w: 182 t, r: 20 mHH: 113 m

SDWVBS 98 WV18w: 402 t, r: 24 mHH: 110 m

SDWVBs 102 m, r:22 mw: 410 t, r: 22 mHH: 111 m


SL4DFBSL 128 m F 12 mw: 99 t, r: 20 mHH:135 m






SDWBWS 70 m W 63mw:99 t, r:24 mHH:131 m

SDWBWS 77 m W 63mw: 88 t, r: 25 mHH: 138 m





SW2S 60 m W 78 mw: 150 t, r: 29 mHH:132 m

SDWVBS 114 m WV 12 mw: 327 t, r: 26 mHH: 124,5 m

SDWVBS 114 m WV 18 mw: 286 t, r: 26 mHH: 130 m





SDWBWS 84 m W 70 mw: 68 t, r: 26 mHH: 152 m


SL9D2FBSL 136,5 m F 18 mw: 100 t, r: 30 mHH: 152 m

SDWBS 72 m W 84 mw: 157 t, r: 28 mHH:153 m

160 m SDWBS 91 m W 84 mW: 44,5 t, r: 32 mHH:174 m

SDWBS 90 m W 84 mW: 132 t, r: 30 mHH:174 m

Pekkaniska’s cranes for wind turbine erections

SUMMARY | 31

Source: Liebherr brochure

Pekkaniska is a leading company renting cranes and platforms in Finland, Russia, Ukraine and Sweden. High quality is assured by competent staff, most modern fleet of 7.000 machines and the SFS-EN ISO 9001 quality system. This certificate, first of it's kind in Nordic countries for a company like Pekkaniska, was granted in 1997.

© Pekkaniska Oy 2012. Data source for this brochure: www.liebherr.com

www.pekkaniska.com

Pekkaniska Oy (Headquarters)Tiilipojanlenkki 1-5

01720 VantaaFINLAND

tel. +358 10 6622 [email protected]

FINLAND | BALTICS | RUSSIA | UKRAINE | SWEDEN