DARNELL-ROSE division evans Industries, Inc. 28 Medium Duty Load Capacity : 175 to 400 lbs. Our most popular series. This exceptional caster has been used for over 75 years in thousands of industrial and institutional applications. All wearing parts are heat treated to last longer, even under the most demanding applications. No other caster will outlast or outperform the Darnell 60 Series. Typical applications include: • Shop Carts & Equipment • Wire Carts and Racks • Food Equipment • Medical Devices • Instrument Cases • Stage & Theater Sets • Moving Dollies Standard finish is Zinc Plating. Available with numerous plate and stem options, as well as brakes, swivel locks, special finishes. SERIES Wheel Selection Wheel Selection Ball Bearings (ø.250 Upper Race) Upper Raceway (Top Cap) King Pin (Rivet) Retaining Washer (Reinforcing Washer) Top Plate Yoke Holes for 5/16" Bolts Lower Raceway (Ball Retainer) Ball Bearings (ø.187 Lower Race) Dust Cap ø.500 .187 SWIVEL RIGID FOUR SIDED DOUBLE BALL BEARING RACEWAY 60 SERIES SERIES Quality Features • FOUR-SIDED, DOUBLE BALL RACEWAY. Hardened steel ball bearings touch upper and lower swivel raceway “on all four sides.” This protects the central king pin from shock loading for free swiveling under heavy loads. • HEAT-TREATED MOVING PARTS. All moving parts are hardened to a precise molecular depth and Rockwell hardness. This extends caster life under rugged conditions and shock loads. • RACEWAY DUST CAP. Dust cap protects the raceway from contamina- tion by dust, dirt, moisture, and other debris. • TWO-PIECE RIGID CASTER. Rigid caster utilizes a welded top plate and yoke design instead of a one-piece stamped yoke as used on competitive brands. • THREAD GUARD. Keep unwanted materials out of the wheel bear- ings thus increasing the life of the caster. Standard on most wheels. Options • Cart Washable Grease Seals • Maintenance Free Swivel Bearings • High-Temperature Wheels • Conductive or Static- Dissipative Wheels • Gray, Non-Marking Wheels • Powder Coated Finishes 60 60 NEOPRENE RUBBER PAGE 108 HARD RUBBER EXTRA-SOFT NEOPRENE HI-CAP NEOPRENE PAGE 110 PAGE 114 PAGE 112 ADVANCED ELASTOMER PAGE 106 STEEL DISC NEOPRENE OR POLYURETHANE PAGE 118
6
Embed
FOUR-SIDED, DOUBLE BALL RACEWAY. Medium … division evans Industries, Inc. 28 ... (Rivet) Retaining Washer (Reinforcing Washer) Top Plate ... #3 #14 #6 #24 Free Position Lock Position
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
DARNELL-ROSEdivision evans Industries, Inc.
28
Medium Duty
Load Capacity: 175 to 400 lbs.
Our most popular series. This exceptional caster has been
used for over 75 years in thousandsof industrial and institutional
applications. All wearing parts are heat treated to last longer, even under
the most demanding applications. No other caster will outlast or
outperform the Darnell 60 Series.
Typical applications include:
• Shop Carts & Equipment
• Wire Carts and Racks
• Food Equipment
• Medical Devices
• Instrument Cases
• Stage & Theater Sets
• Moving Dollies
Standard finish is Zinc Plating.Available with numerous plate and
stem options, as well as brakes, swivel locks, special finishes.
SERIES
Wheel SelectionWheel Selection
Ball Bearings(ø.250 Upper Race)
Upper Raceway(Top Cap)
King Pin(Rivet)
Retaining Washer(Reinforcing Washer)
Top Plate
Yoke
Holes for5/16" Bolts
Lower Raceway(Ball Retainer)
Ball Bearings(ø.187 Lower Race)
Dust Cap
ø.500
.187
SWIVEL
RIGID
FOUR SIDED DOUBLE BALL BEARING RACEWAY60 SERIES
SERIES Quality Features• FOUR-SIDED, DOUBLE BALL RACEWAY.
Hardened steel ball bearings touch upper andlower swivel raceway “on all four sides.” Thisprotects the central king pin from shock loadingfor free swiveling under heavy loads.
• HEAT-TREATED MOVING PARTS.All moving parts are hardened to a precise molecular depth and Rockwell hardness. Thisextends caster life under rugged conditions andshock loads.
• RACEWAY DUST CAP. Dust cap protects the raceway from contamina-tion by dust, dirt, moisture, and other debris.
• TWO-PIECE RIGID CASTER. Rigid caster utilizes a welded top plate and yokedesign instead of a one-piece stamped yoke asused on competitive brands.
• THREAD GUARD.Keep unwanted materials out of the wheel bear-ings thus increasing the life of the caster.Standard on most wheels.
Options• Cart Washable Grease Seals
• Maintenance Free SwivelBearings
• High-Temperature Wheels
• Conductive or Static-Dissipative Wheels
• Gray, Non-Marking Wheels
• Powder Coated Finishes
6060
NEOPRENE RUBBERPAGE 108
HARD RUBBEREXTRA-SOFT NEOPRENEHI-CAP NEOPRENEPAGE 110 PAGE 114 PAGE 112
Other stem sizes and dimensions available.*Special Order/Minimum Quantity
Other stem sizes and dimensions available.*Special Order/Minimum Quantity
STEMS
TOP PLATE5 "
4 "
3" 4"
Holesfor 3/8"Dia. Bolts
4-1/2"3 to 3-5/8"
2-5/8to 3"
3-3/4"
S o edHoles for3/8" Dia.Bolts
#20
#3 #14
#6 #24
FreePosition
LockPosition
Swivel Radius
Wheel Brake (WB)
Free Position
Lock Position
Four Position Swivel Lock (SL)
LockPosition
FreePosition
Radial Brake (RB)
BRAKES
“O” STEM TABLE
L
D
“L” STEM TABLE
L
T
“7/8" round” stem7/8"
2-1/2"
“7/8" square” stem
7/8"
2-1/2"
1"
3/4"
1-3/4"
3/8"
Operates by a foot pedal lever that has a rub-ber brake pad to form a positive brake actionwhen the brake lever is pressed down toengage. To restore back to the normal posi-tion, simply reverse the action to disengagethe brake. Easy to operate and trouble free.Not available in 2-1/2".
Available on Darnell-Rose’s most popularMedium Duty Industrial Casters. Exceptionalbrake for light and medium duty applications,either industrial or institutional. Side pedalengages tread lock to restrain wheel movement.Brake kit available for field installation.Not available in 2-1/2", 5-1/2", 6" or 8".
A horizontal four position swivel lock with aspring-loaded plunger to securely hold theswivel in the slotted position desired. Plungercan be put into a neutral position for freeswiveling action.
Dimension D
“E” STEM TABLED
3"
ROUND3/4"7/8"1"
1-1/16"1-1/8"1-1/4"1-3/8"
1-7/16"1-1/2"
1-9/16"1-5/8"1-3/4"1-7/8"1.9"
SQUARE3/4"7/8"1"
1-1/8"1-1/4"1-3/8"1-1/2"1-5/8"1-3/4"
2"
“LP” stem “LPC” stem
T3/4"- 1-1/2"3/4"- 1-1/2"
CAST IRON HUB
MOLD-ON POLYURETHANEPAGE 128
POLYURETHANEPOLYOLEFIN HUB
PAGE 126
THERMO PLASTIC RUBBERPAGE 122 & 124
POLYOLEFINPAGE 136
PHENOLICPAGE 134
CAST IRONPAGE 138
Subtract .187" from overall height for stem casters.
30
60 SERIES60 SERIES continued
Diameter TreadWidth
LoadCapacity Wheel Material Bearing Swivel Part Number Rigid Part Number Approx.
POLYURETHANE/CAST IRON HUB BALL 64-20-XADI-M-CI 64-20-XRADI-M-CI
POLYURETHANE/CAST IRON HUB BALL 65-20-XADI-M-CI 65-20-XRADI-M-CI
326060 SERIESSERIES
StainlessSteel
Designed to provide the ultimate
CORROSION PROTECTIONThese casters are ideally suited for acetic, nitric and citric acid environments inaddition to being will suited for organic and inorganic chemicals, dye stuffs, crudeand refined oil environments. Widely accepted in the following industries:
Made with non-magnetic, 303/304 stainless steel.
• DAIRY
• FOOD PROCESSING
• HOSPITALS & MEDICAL
• BEVERAGE
• PHARMACEUTICALS
• ANIMAL CAGES
DiameterTreadWidth
LoadCapacity
Wheel Material Bearing Swivel Part Number Rigid Part Number Approx.Weight