PC Product Catalogue Eng

PETRO-CANADA LUBRICANTS

LubeSource cataLogueA guide to selecting the right lubricant for the job

This catalogue has been compiled to assist in selecting the right lubricant, specialty fluid or grease for the intended application. Through a series of prompts and questions, these product ‘decision trees’ systematically narrow the choice of available lubricant products to a primary recommended product choice.

Our extensive line up of lubricants and greases includes products that are environmentally sensitive, recyclable, virtually non-toxic, and biodegradable. We have an enviable reputation for high quality, long lasting and cost efficient products. Our products can deliver Tangible Savings Solutions (see page 44) for improving performance and savings.

This catalogue has been designed for both general applications and a selected number of specialized applications. Not all possible applications and conditions could be represented in these pages. So if you have a unique or specialized application that may not be covered in this catalogue or you wish to discuss your application, please contact a Petro-Canada Lubricants Representative or one of our many qualified, global Petro-Canada Lubricants Authorized Distributors. They would be pleased to give you personal assistance in selecting the right product choice.

While Petro-Canada Lubricants has made every effort to provide complete and accurate information with regard to its own brand of lubricant products, the company accepts no responsibility for end users substituting competitive products of a similar nature. As with all Petro-Canada Lubricants products, our standard No-Nonsense Warranty applies.

Towards the back of this catalogue, we have also included a listing of our lubricant product part numbers. There is a unique product part number for each individual product SKU that includes product name, grade and package size.

lubricants.petro-canada.ca

Selecting the right lubricant can save you time, money and improve your production.

2

LubeSource Index

Heavy Duty engine oil ....................................................... 4 & 5

automotive gear oils ......................................................... 6 & 7

commercial transportation Hydraulic Fluids ....................... 8 & 9

Passenger car Motor oils ....................................................... 10

automatic transmission Fluids................................................. 11

transmission/Hydraulic Fluids ................................................. 12

transmission/Drive train Fluids ............................................... 13

Small engine oils .................................................................... 14

tackified Products, Paper Machine oils & Saw guides ....................................... 15

Multi-application greases .............................................. 16 & 17

Mining greases ............................................................. 18 & 19

Specialty greases ......................................................... 20 & 21

Industrial gear oils ........................................................ 22 & 23

Industrial Hydraulic Fluids .............................................. 24 & 25

turbine Fluids & Wind turbine gear oils .......................... 26 & 27

Natural gas engine oils ................................................. 28 & 29

compressor Fluids ......................................................... 30 & 31

Heat transfer Fluids ...................................................... 32 & 33

Metal Working oils ........................................................ 34 & 35

Food grade Lubricants .................................................... 36 – 40

LuMINoL™ ............................................................................. 41

Way Lubricants and Miscellaneous Fluids ....................... 42 & 43

commercial transportation Lubricants

tackified Products, Paper Machine oils & Saw guides

Industrial Lubricants

Food grade Lubricants

electrical Insulating Fluids

tangible Savings Solutions ............................................................... 44Lubricant Product Numbers ....................................................... 45 – 50

greases

Way Lubricants & Miscellaneous Fluids

3

HEAVY DUTY DIESEL ENGINE OIL

FLeetS LookINg to exteND tHe LIFe oF tHeIr eNgINeS?

No

Long or Short Haul (Frequent Idle)

Advanced All-Weather Performance?

Severe Loads >80,000 lbs


Yes (down to -25ºC) No Yes (down to -30ºC) No

Yes

Operations are primarily off-road (possibly using non ULSD diesel)

Yes

Short Haul (Frequent Cold

Start-Ups)


No Yes

Normal Loads or Severe Off-Road Service

>80,000 lbs

DURON-E XL Synthetic Blend 15W-40• DURON-E XL Synthetic

Blend 15W-40, made with a synthetic base oil blend and high performance additives, raises the stakes by delivering exceptional soot control, cold start-up performance and minimizes the need for top-up oil.

• It also protects vital engine parts while extending drain intervals.

DURON-E 10W-30• Potential to improve

fuel economy up to 1% relative to Duron-E 15W-40

• Suitable for low emission engine designs and protects diesel particulate filters.

• Offers advanced soot control capabilities.

• It also demonstrates good cold startup performance, has potential to improve fuel economy and minimizes engine wear and oil consumption.

DURON-E Synthetic 10W-40• DURON-E Synthetic

10W-40 reaches the pinnacle of lubrication with the potential to extend drains and conserve energy through ease of start-up and lower viscous drag.

• It combines excellent pumpability at -35˚C/-31˚F (5W grade requirement) with industry leading soot control, engine wear control and top-up performance.

• DURON-E Synthetic 10W-40 is the ultimate all-season, all fleet heavy duty engine oil.

DURON-E Synthetic 5W-40• DURON-E Synthetic 5W-40

has outstanding performance and improves your bottom line by extending drains and conserving energy through ease of start-up and lower viscous drag.

• It combines excellent pumpability with advanced soot control, engine wear control and top-up performance.

• DURON-E Synthetic 5W-40 further widens the all season window with its unique licenced synthetic formula.

4

DURON-E XL Synthetic Blend 15W-40• DURON-E XL Synthetic

Blend 15W-40, made with a synthetic base oil blend and high performance additives, raises the stakes by delivering exceptional soot control, cold start-up performance and minimizes the need for top-up oil.

• It also protects vital engine parts with the potential for extending drain intervals.

DURON-E 15W-40• DURON-E 15W-40

offers advanced soot control capabilities.

• It also demonstrates good cold start-up performance, minimizes engine wear and oil consumption.

• Choose DURON-E 15W-40 when you need dependable next generation performance in your low emission or legacy engines.

Fuel Economy

Down to -25ºC

Normal Loads/ Normal Service

Normal Loads OrSevere Off-Road

Service >80,000 lbs

Product Performance

duron uHP 10W-40

• ultra High Performance diesel (uHPd) engine oil designed for longer engine life, better all weather performance and increased efficiency

• exceeds acea e6/e7/e9 standards

• Low SaPS (Sulphated ash, Phosphorous, Sulphur).

duron XL Synthetic Blend 0W-30

• remains fluid to -40˚c/-40˚f.

• aPI cH-4 Licensed.

duron

monogrades• designed to lubricate

engines in heavy duty service.

• Suitable for engines fuelled by diesel, gasoline, propane or compressed natural gas (cnG).

• available in Sae grades 10W, 20, 30, 40 and 50.

dIeSeLtonIc™ 40 motor oil

• designed for two-stroke cycle detroit diesel engines, including Series 149.

• Single grade, low ash oil.

• for fleet, construction and stationary applications.

raLuBe™ • designed for severe service locomotive, marine and stationary power plant.

• chlorine-free and zinc-free chemistry. these products provide excellent oxidation resistance, wear protection and deposit control.

• ralube 940 cf is approved for: electro-motive diesel Inc., General electric.

• available in both 9 tBn (940 cf) and 13 tBn (40 cfS) products.

OTHER PRODUCTS

ORDown to -30ºC

Extreme Cold Temperature Operation

Advanced All-Weather

Performance

• DURONTM-E Synthetic 10W-40 can extend drain intervals and has potential to improve fuel economy. It has better low temperature properties, which reduces the need for idling, industry leading soot control which prevents oil thickening, ability to keep engines clean for optimal efficiencies and lower viscous drag in engines that are not fully warmed up. DURON-E Synthetic 10W-40 can help your engines run smoother, cleaner and longer.

• DURON-E Synthetic 5W-40 offers advanced soot control and provides all-weather protection and performance, especially in low temperature environments. It conserves energy and reduces engine wear through ease of cold weather start-up and lower viscous drag.

• DURON-E Synthetic 0W-40 is specially formulated to help on-road and off-road fleets perform in the coldest conditions. It features long lasting protection in extreme cold temperatures, smoother start-ups, advanced soot control, extended drain capabilities and energy conservation through ease of start-up and low viscous drag.

DURON-E Synthetic 5W-40• The ultimate engine

oil for all-weather protection and performance.

• Conserves energy through ease of cold weather start-up and lower viscous drag.

• Proven extended drain capability in pre-’07 low emission engines.

DURON XL Synthetic Blend 15W-40• DURON XL Synthetic

Blend 15W-40 is fully compatible with pre-’07 low emission engine designs.

• Specially formulated for use in severe operating conditions, in both highway and off-highway applications.


DURON Synthetic 5W-40• The ultimate engine

oil for all-season protection and performance.

• Conserves energy through ease of cold weather start-up and lower viscous drag.


• DURON E Synthetic 5W-40 is also available for ‘07 and 2010 low emission engines.

DURON-E Synthetic 0W-40• Remains fluid to below

-40˚C/-40˚F.

• Reduce unnecessary idling time. Shut down engines with confidence of restart in extreme cold temperatures.

• The design is based on the same CJ-4 / SM performance additive technology used for DURON-E 15W-40 and is suitable for use in 2007, 2010 and pre-2007 engines.

5

DURON-E Synthetic 10W-40• DURON-E Synthetic

10W-40 reaches the pinnacle of lubrication with the potential to extend drains and conserve energy through ease of start-up and lower viscous drag.

• It combines excellent pumpability at -35˚C/-31˚F (5W grade requirement) with industry leading soot control, engine wear control and top-up performance.

• DURON-E Synthetic 10W-40 is the ultimate all-season, all fleet heavy duty engine oil.

Down to -25ºC

PerForMaNce beNeFItS• DURON-E XL SYNTHETIC BLEND 15W-40, made with a synthetic base

oil blend and high performance additives, raises the stakes by delivering exceptional soot control, cold start-up performance and reduces the need for top-up oil. It also protects vital engine parts with the potential for extending drain intervals.

• DURON-E 15W-40 and DURON-E 10W-30 offer advanced soot control capabilities. They also demonstrate good cold start-up performance, minimize engine wear and oil consumption. Choose DURON-E 15W-40 and DURON-E 10W-30 when you need dependable API CJ-4 performance in your low emission or legacy engines.

• Petro-Canada DURON-E multigrade engine oils are premium heavy duty engine oils that meet API CJ-4 and are suitable for 2010 low emission engines.

Yes (down to -30ºC) Yes (down to -35ºC)

NO

TRAXON 85W-140• TRAXON 85W-140 provides

outstanding shear stability and contains anti-wear/EP additives for tough, high-load, high-operating temperature conditions for extended equipment life.

• Delivers excellent resistance to degradation and sludging.

• Approved against SAE J2360 (MIL-PRF-2105E) and Mack GO-J specifications.

TRAXON Synthetic 75W-90• TRAXON Synthetic 75W-90

provides outstanding low temperature protection in extreme cold weather conditions in the most extreme applications.

• Delivers outstanding low temperature protection and torque efficiency.

• Suitable where SAE J2360 (MIL-PRF-2105E) and Mack GO-J requirements are specified.

TRAXON™ 80W-90• TRAXON 80W-90 provides

advanced, long-lasting protection for reduced downtime and maintenance costs.

• Outstanding shear stability which can ensure retention of viscosity to protect equipment against metal-to-metal contact and wear.


• Meets performance requirements, and is suitable for use in applications that require MAN 342 M2 or M1 approval.

TRAXON XL Synthetic Blend 75W-90• TRAXON XL Synthetic Blend

75W-90 provides excellent low temperature protection and more efficient operating performance for lower energy consumption than conventional 80W-90 gear oil.

• Provides shear stability and resistance to degradation.


NO

YES

SAE 50 (J300)

NO

AUTOmOTIVE GEAr OILS

Wider Temperature Performance required?

Is energy or torque

efficiency a concern?

Is Advanced Performance required?

Wider Temperature Performance required?

NO

YES

DoeS Your SPecIFIc NeeD reQuIre aN Sae J2360/aPI gL-5 oIL

or aN Sae 50 oIL ?

Does your equipment have an Eaton Roadranger, ArvinMeritor or Navistar extended warranty?

GL-5 Gear Oil

YES

NO

YES

Does your transmission and/or rear axle specify heavier grades

SUCH AS #W-140?

6

TRAXON XL Synthetic Blend 80W-140• TRAXON XL Synthetic Blend

80W-140 provides excellent shear stability for retention of viscosity to help protect equipment against metal-to-metal contact and wear.

• Delivers advanced resistance to degradation and sludging vs. GL-5 85W-140 oils.

• Better torque and energy efficiency vs. conventional GL-5 85W-140 oils.

• Suitable where SAE J2360 (MIL-PRF-2105E) or Mack GO-J requirements are specified.

TRAXON E Synthetic 80W-140• TRAXON E Synthetic 80W-140 contains

extreme pressure additives for operation under a variety of load conditions with excellent resistance to oxidation for long lubricant life.

• High viscosity index, good low temperature properties and extremely low channel point for excellent protection in cold weather.

• Recommended for use in manual transmissions requiring EP-type oils, differentials including limited slip (top-up only) and transfer cases for heavy equipment, trucks and tractors.

• Suitable where API Service Classifications GL-5 and MT-1, Dana Corporation, Axle Division, SHAES-256, SHAES-234, Navistar / International TMS 6816, MIL-L-2105D / MIL-PRF-2105E, Mack Truck GO-J Plus and Mack Truck GO-J requirements are specified.

TRAXON E Synthetic 75W-90• TRAXON E Synthetic 75W-90 contains

extreme pressure additives for operation under a variety of load conditions with excellent resistance to oxidation for long lubricant life.

• High viscosity index, good low temperature properties and extremely low channel point for excellent protection in cold weather.

• Recommended for use in manual transmissions requiring EP-type oils, differentials excluding limited slip and transfer cases for heavy equipment, trucks and tractors.

• Suitable where API Service Classifications GL-5 and MT-1, Dana Corporation, Axle Division, SHAES-256, SHAES-234, Navistar / International TMS 6816, MIL-L-2105D / MIL-PRF-2105E, Mack Truck GO-J Plus and Mack Truck GO-J requirements are specified.

PerForMaNce beNeFItS

• Designed for use in most manual transmissions, differentials, power take-off units and final drives for passenger cars, trucks, and off-highway vehicles where an EP type gear lubricant is recommended.

• Meets API GL-5 and MT-1 requirements and SAE J2360 Global Standards.

• Suitable for most oil lubricated universal joints, wheel bearings, planetary gear sets, steering gears and industrial gear reducers requiring GL-3, GL-4 or GL-5 oils.

• Excellent thermal and oxidation stability and gear cleanliness.

• Not for use in automotive applications that specify an API GL-4 oil for the transmission.

NO

YES

YES

TRAXON E Synthetic CD-50• TRAXON E Synthetic CD-50

provides excellent year-round performance where a non-EP transmission lubricant is required.

• Contains an anti-wear additive, as well as rust, oxidation and corrosion inhibitors to protect vital transmission parts in severe heat, oxidation and shear conditions.

• Suitable where Eaton Transmission Division PS 164 (Rev 7), Extended warranty coverage at Eaton Corporation (500,000 miles), Mack Truck TO-A-PLUS, ArvinMeritor 0-81, AP1 MT-1, International TMS 6816 and ZF TE-ML 02L requirements are specified.

SAE 80W-140 SAE 75W-90

Does your transmission and/or rear axle specify heavier grades?

7

NO YES

cOmmErcIAL TrANSpOrTATION HYDrAULIc FLUIDS

HYDREX XV All Season• HYDREX XV All Season performs

in mobile equipment that has to be started at temperatures as low as -40˚C/-40˚F and performs equally well at temperatures as high as 79˚C/174˚F.

• HYDREX XV All Season performs exceedingly well in a wide range of industrial machinery and mobile equipment used in such industries as forestry, construction, mining, public utility and marine operations.

• Energy efficiencies could be realized.

NO

YES

YES

NO

NODo you operate your hydraulics in Arctic conditions or require instant

response in winter season?

YES

HYDREX MV• HYDREX MV is recommended for

heavy duty hydraulic applications operating at high pressures and in wide temperature range conditions.

• They are ideally suited for piston, gear and vane pumps used in industrial, marine, forestry, mining and other mobile hydraulic systems.

• These fluids offer minimal fluid friction at low start-up temperatures and excellent protection at high operating temperatures.


• Available in grades 22, 36 and 60.

Do you require an all-season hydraulic oil?

HYDREX AW• HYDREX AW is recommended

for heavy duty hydraulic applications requiring outstanding wear protection.

• HYDREX AW fluids have both excellent thermal stability and oxidation life, which means extended intervals between change-outs and excellent protection against corrosion and varnish.

• Available in grades 22, 32, 46, 68, 80 and 100.

Can you consolidate viscosity grades?

are tHe HYDrauLIcS uSeD IN aN eNvIroNMeNtaLLY

SeNSItIve area?

8

ENVIRON AW• ENVIRON AW is free of heavy

metals, is non-toxic, inherently biodegradable (according to OECD 301B protocols) and recyclable.

• It is formulated to provide outstanding anti-wear protection for extended equipment life.

• Exceptional oxidation stability provides long oil life for fewer change-outs and minimizes sludge and varnish deposits.


ENVIRON MV• ENVIRON MV is free of heavy


• Formulated for both indoor and outdoor seasonal use.

• Its formulation provides outstanding anti-wear protection for extended equipment life.

• Exceptional oxidation stability means long oil life for fewer change-outs and minimizes sludge and varnish deposits.


• Available in grades 32 and 46.

Do you operate your hydraulics in wide temperatures?


• HYDREX™ AW are premium performance, long-life anti-wear hydraulic fluids.

• HYDREX MV are designed for use in wide temperature ranges.

• HYDREX XV All Season is recommended for year-round use in equipment that must perform in both low and high temperature ranges. Potential energy efficiencies could be realized with product versus monograde products.

• ENVIRON™ AW monograde hydraulic fluids are designed for use in equipment used primarily in environmentally sensitive areas.

• ENVIRON MV fluids are designed for year-round use in equipment operating in wide temperature ranges, particularly in environmentally sensitive areas.

Do you require an extremely wide temperature range or a hydraulic oil suitable for use in Liebherr Cranes?

NO YES

NO YES

HYDREX Extreme• HYDREX Extreme is a high

performance hydraulic fluid designed for extremely wide temperature protection for high and severe low temperatures. (-35ºC to +68ºC with a start up temperature of -48ºC.)

• It is designed for vane, gear and axial piston hydraulic pumps over an extremely wide range of operating temperatures.


• Hydrex Extreme is suitable for use in Liebherr Cranes where extreme cold temperatures occur.

• It is free of heavy metals, is non-toxic and is inherently biodegradable according to OECD 301B protocols.

HYDREX MV Arctic 15• HYDREX MV Arctic 15 is a

premium, high performance hydraulic fluid designed for extremely cold temperature operations, particularly in arctic climates as low as -45˚C/-49˚F.

• It is also inherently biodegradable according to OECD 301B, and recommended for use in critical low temperature systems that have to respond quickly and reliably.

9

pASSENGEr cAr mOTOr OILS

Petro-Canada Passenger Car Motor OilsPRODUCT VISCOSITY GRADE PERFORMANCE FEATURES CREDENTIAlS

Supreme™ Synthetic 0W-20

0W-30

5W-20

5W-30

10W-30

• Advanced formula for ultimate engine protection.

• Excellent resistance to thermal breakdown and oil thickening.

• Reduced oil consumption; less top-up required.

• Exceptional low temperature fluidity.

• Meets API SN, ILSAC GF-5 and is resource conserving.

• Meets GM 6094M and Chrysler MS-6395.

• 5W-30 meets GM 4718M

• 5W-30 is also fully approved against the gM dexos1™ specification, and meets or exceeds Honda HTO-06.

• 5W-20 meets Ford WSS-M2C945-A

• 5W-30 meets Ford WSS-M2C946-A

Supreme™ 5W-20

5W-30

10W-30

10W-40

20W-50

• Premium conventional motor oil that helps keep engines running clean.

• Outstanding low temperature protection.

• Exceptional resistance to thermal breakdown.

• Meets API SN.

• 5W-20, 5W-30 and 10W-30 meet ILSAC GF-5 and are resource conserving.

• 5W-20 meets Ford WSS-M2C945-A.

• 5W-20, 5W-30 and 10W-30 meet GM 6094M and Chrysler MS-6395.

• 5W-30 meets Ford WSS-M2C946-A.


• Petro-Canada offers a full line of high quality passenger car motor oils.

• Meets the current warranty requirements of North American, European and Asian vehicles where the latest API Service Classification SN or ILSAC GF-5 specification is required.

• Completely back-serviceable where API SM or ILSAC GF-4 engine oils are recommended.

10

* dexos1™ is a trademark of General Motors LLC. Petro-Canada is a licensed user.

Automatic Transmission FluidsPRODUCT PERFORMANCE FEATURES CREDENTIAlS

DeXrON®-VI • Delivers 2X the service life of DEXRON®-III (H) ATF fluids.

• Offers enhanced performance in new and older General Motors transmissions.

• Provides more consistent and responsive shift feel.

• Extends life of transmission through improved oxidation resistance, wear protection and friction durability.

• GM DEXRON®-VI licensed.• Meets GM service fill specification GMN 10060.• Petro-Canada DEXRON®-VI is suitable for use where Volvo

specification 97342 is mandated. It is also suitable where Chrysler/Dodge/Jeep vehicles call for Part Number 68043742AA.

• GM recommends the use of DEXRON®-VI for all GM automatic transmissions including where the former DEXRON®-IIIH, -IIIG, -IIE, or -II specification was recommended.

• Approved for Voith standard drain intervals.• MB-Approval 236.41.

ATF+4® • Offers optimized shift efficiency, improved oxidation and shear stability for use in Chrysler automatic transmissions.

• Extensively tested and approved by Chrysler for their material specification, MS-9602.

• Chrysler ATF+4® licensed.

• Meets Chrysler material specification MS-9602.

• Back-serviceable in transmissions where ATF+3® fluids or earlier versions were recommended.

DuraDriveTm mV Synthetic ATF • Petro-Canada’s best Multi-Vehicle ATF.• Advanced performance over conventional ATF fluids.• Improved oxidative resistance, wear protection and

sheer stability.• Enhanced friction and anti-shudder durability.

• Suitable for use in a wide range of North American, European and Asian vehicles.

• Ford MERCON®-V licensed.

• Exceeds JASO 1A requirements.

Heavy Duty Synthetic Blend ATF

• Specially formulated for commercial and heavy duty transmission systems.

• Outstanding resistance to oxidative and thermal breakdown.

• Offers extended drain intervals and multiple heavy duty credentials.

• Approved For: Voith (Voith G1363) and ZF (ZF TE-ML 02F, 03D, 04D, 14B, 16L and 17C) extended drain applications, and Allison C4.

• Suitable for use where Allison TES-295, Caterpillar TO-2, MB 236, MAN 339, Volvo 97341 or MERCON®-V is recommended.

• May also be used in automatic transmissions where a fluid meeting the former DEXRON®-IIIH, -IIIG, -IIE, -II, or MERCON®

specifications is recommended. Not to be used where MERCON®LV or MERCON®SP are required.

• May also be used as a hydraulic or power steering fluid.

ATF D3m • Demonstrates outstanding oxidation and thermal stability, giving long service life under severe operating conditions.

• Excellent low temperature protection and smoother shifting.

• ATF D3M may be used in automatic transmissions where a fluid meeting the former DEXRON®-IIIH, -IIIG, -IIE, -II, or MERCON® specifications is recommended.

• Allison TES-389 licensed.• Suitable for use where Mercedes-Benz 236.1, Allison C-4,

or Caterpillar TO-2 is recommended.• May also be used in hydraulic and power steering systems.• Meets requirements for Clark Powershift and Renke

transmissions.

Petro-Canada Automatic Transmission Fluids

AUTOmATIc TrANSmISSION FLUIDS


• Petro-Canada offers a full line of automatic transmission fluids that meet the latest performance credentials of the major car manufacturers.

• Offers outstanding wear protection to extend the life of automatic transmissions.

• Offers exceptional low temperature performance.

DEXRON® is a registered trademark of General Motors LLC. MERCON® is a registered trademark of Ford Motor Co. ATF+4® and ATF+3® are registered trademarks of Chrysler LLC.

11


• DURATRAN™ is designed for agriculture, mining, forestry and construction equipment with a common oil system for transmission, differential, hydraulic, power take-off, wet brake and power steering mechanisms.

• Meets field performance requirements of all North American and most global manufacturers.

DURATRANAPPlICATION PRODUCT PERFORMANCE FEATURES CREDENTIAlS/IDENTIFICATION

DuratraN Synthetic is designed for agriculture, mining, forestry and construction equipment. Designed specifically for true all-season performance, eliminates seasonal change-outs and has excellent oxidation stability.

DURATRAN Synthetic

• Exceptional true all-season performance for reliable hot and cold weather operation.

• Performs at temperatures down to -40˚C/-40˚F.

• Extends drain intervals; reduces the need for seasonal change-out.

• Excellent frictional characteristics which can help prevent brake noise and brake chatter, thereby helping to prolong these components’ life.

• Energy efficiencies can be realized versus monograde Transmission/Hydraulic Fluids (THF).

• Surpasses John Deere OEM specification J20C and J20D.• Suitable for use in applications that call for CNH MS1204-1207,

MS1209, MS1210, MS 1230/CNH MAT 3509, JIC143-145, JIC185, B5, B6, FNHA-2-C-201, 201A, 200, ESN M2C134 (A/B/C/D), ESN M2C86-B, M2C53-A, M2C48-B, White Farm (Oliver) Q1826, Q1802, Q1766B, Q1722, Q1705, Massey-Ferguson M1141, M1135, M1129A, M1127-A/B, M1110, AGCO/Deutz-Allis/Allis Power Fluid 821XL, 257541, 272843, 246634, Volvo WB 101, Volvo WB 102

• Recommended for use in Kubota UDT, Steiger, Versatile, Landini and Hesston-Fiat farm tractors.

• Suitable for use in Sundstrand Hydrostatic Transmissions and Dresser Construction Equipment.

• API GL-4, suitable for use against Caterpillar TO-2, Clark Lift Truck TA12, TA18, HR500, HR600.

• Suitable for use where Allison C-3 Fluid and ZF Transmission TE-ML 3E, 3F, 5F, 6K requirements are called for.

DuratraN xL Synthetic blend is designed for agriculture, mining, forestry and construction equipment. Designed particularly for winter and shoulder season work with excellent oxidation stability.

DURATRAN XL Synthetic Blend

• Extends drain intervals; reduces the need for shorter seasonal change-out.

• Performs at temperatures down to -40˚C/-40˚F.

• Excellent frictional characteristics to help prevent brake noise and brake chatter, which could help prolong these components’ life.

• Surpasses John Deere OEM specification J20D.• Suitable for use in colder applications that call for CNH MS1206,

MS1207, JIC143-145, JIC185, B5, B6, FNHA-2-C-200, ESN M2C86-B, M2C53-A, M2C48-B, White Farm (Oliver) Q1802, 1766B, Q1722, Q1705, Massey-Ferguson M1141, M1135, M1129A, M1127-B, M1110, AGCO/ Deutz-Allis/Allis Power Fluid 257541, 272843.


• API GL-4, suitable for use in Caterpillar TO-2, Clark Lift Truck TA18, HR500.

• Suitable for use where Allison C-3 Fluid and ZF Transmission TE-ML 3F requirements are called for.

DuratraN is designed for agriculture, mining, forestry and construction equipment and is designed to exceed the performance characteristics of summer grade tHF fluids with outstanding oxidation stability.

DURATRAN • For extreme summer climate operating conditions.• Extreme high temperature performance. • Extends drain intervals, even in the

hottest summer months.• Best suited for agricultural summer

applications for various OEM farm equipment.

• Excellent wear protection, even when water contamination is present.

• Excellent frictional characteristics which can prevent brake noise and brake chatter, which could help prolong these components’ life.

• Surpasses John Deere OEM specification J20C.• Suitable for use in applications that call for

CNH MS1204, MS1205, MS1209, MS1210, MS 1230/CNH MAT 3509, JIC143-145, JIC185, B5, B6, FNHA-2-C-201, 201A, 200, ESN M2C134 (A/B/C/D), ESN M2C86-B, M2C53-A, M2C48-B, White Farm (Oliver) Q1826, Q1802, Q1766B, Q1722, Q1705, Massey-Ferguson M1141, M1135, M1129A, M1127-A/B, M1110, AGCO/Deutz-Allis/Allis Power Fluid 821XL, 246634, Volvo WB 101

• Recommended for use in Kubota UDT, Steiger, Versatile, Landini and Hesston-Fiat farm tractors.


• API GL-4, suitable for use against Caterpillar TO-2, Clark Lift Truck TA12, HR600.

• Suitable for use where Allison C-3 Fluid and ZF Transmission TE-ML 3E, 5F, 6K requirements are called for.

TrANSmISSION/HYDrAULIc FLUIDS

12

TrANSmISSION/DrIVE TrAIN FLUIDS


• PRODURO™ TO-4+ oils are designed to meet and exceed Caterpillar TO-4 (TDTO) lubricant specifications.

• Provides excellent protection, long oil life, smooth operation and lower operational costs.

• PRODURO FD-1 oil is designed to meet Caterpillar FD-1 Final Drive lubricant specifications.

PRODUROAPPlICATION PRODUCT PERFORMANCE FEATURES CREDENTIAlS/IDENTIFICATION

Suitable for use in a variety of construction, mining and Heavy Duty transmission/hydraulic/wet brakes/final drive where higher quality synthetic wide operating temperature performance is desired.

PRODURO TO-4+ Synthetic All Season

• May eliminate seasonal change outs (See Operating Temp ranges for further details) and provides wider operation temperature ranges to TO-4 10W and TO-4 30.

• Maximizes life of frictional materials in Caterpillar powershift transmissions.

• Minimizes chatter in wet brake mechanisms.

• Outstanding anti-wear protection for hydraulic pumps and transmission systems.

• Designed to maximize durability and equipment protection in cold and hot temperatures.

• Energy efficiencies could be realized versus monogrades.

• Suitable for use where Caterpillar TO-4 lubricant specifications (TDTO) are required.

• Suitable for use where Allison C-4 Fluid and ZF Transmission TE-ML 03 3C requirements are called for.

• API Gear Lubricant Service GL-3, API Category CD.

• Suitable for use in KOMATSU equipment which require the micro-clutch performance.

Suitable for use in a variety of construction, mining and Heavy Duty transmission/hydraulic/wet brakes/final drive where the arctic temperature conditions are experienced.

PRODURO TO-4+ XL Synthetic Blend LoTemp

• Provides effective lubrication and uses high quality base oil.

• Provides wider operating temperature ranges than TO-4 10W and suitable for Arctic conditions down to -45˚C/-49˚F.



• Excellent anti-wear protection for hydraulic pumps and transmission systems.

• Suitable for use where Caterpillar TO-4 lubricant specifications (TDTO) are required.


Suitable for use in a variety of construction, mining and Heavy Duty transmission/hydraulic/wet brake and final drives where higher performing mono-grades are desired.

PRODURO TO-4+

10W, 30, 50 and 60 grades

• Provides effective lubrication and may extend oil drain intervals.



• Excellent anti-wear protection for hydraulic pumps, transmission and final drives.

• Designed to meet Caterpillar TO-4 lubricant specification (TDTO).

• Suitable for use (10W and 30 only) where Allison C-4 and ZF Transmission TE-ML 03C fluid requirements are called for.

• API Gear Lubricant Service GL-3, API Category CD.


Suitable for use in a variety of construction/mining final drive and axles where higher performing mono-grades and longer gear and bearing life are desired.

PRODURO FD-1 60

• Provides improved gear and bearing life in final drives and axles.

• Provides extended drains in final drives versus the same SAE TO-4 fluids.

Not for use in transmissions, hydraulics, or wet brakes.

Not recommended for use in older designed caterpillar final drives (789 series) under extreme loading.

• Designed to meet Caterpillar FD-1 lubricant specifications.

13

SmALL ENGINE OILS


• Petro-Canada’s family of small engine oils is designed to give excellent performance in both air-cooled and water-cooled 2-stroke cycle engines operating under all conditions.

• Contain high performance additives, which give excellent anti-scuff and anti-wear performance to ensure reliability, internal cleanliness and long engine life.

• The additive systems used produce minimal spark plug, ring, piston and valve deposits and therefore allow good starting and continued efficient engine operation.

Small Engine OilsAPPlICATION PRODUCT PERFORMANCE FEATURES CREDENTIAlS/IDENTIFICATION

outboard Motors Outboard Motor Oil

• For use in high performance, water-cooled, 2-stroke cycle engines.

• Controls deposit formation/ring-sticking.

• Provides excellent protection against rust and corrosion.

• Reduces smoke emission and uses ashless additive technology.

• Minimizes spark plug fouling and engine pre-ignition.

• Virtually non-toxic to water inhabiting species such as fish.

• Dyed blue for easy detection of gasoline/oil mixtures.

• NMMA TC-W3®* (RL-00440K).

• SAE Fluidity/Miscibility (F/M) Grade 3.

• Suitable for use in applications where API TC-W3® quality oils are recommended such as Mercury Marine, Bombardier (Formally OMC which makes Johnson & Evinrude engines), Yamaha, Suzuki, Nissan, etc.

Snowmobiles Petro-Canada Snowmobile Motor Oil

• May be used in both oil-injected and pre-mixed gasoline/oil lubricated engines.




• Mixes easily with gas and pumps down to -40˚C/-40˚F.

• Low smoke emissions and low ash levels.

• Dyed blue/green for easy detection of gasoline/oil mixtures.

• Suitable for use against JASO FA or FB, ISO-L-EGB.


• Suitable for use in air-cooled snowmobiles where API TC and TISI quality oils are recommended, such as Bombardier, Arctic Cat, Polaris, Yamaha, etc.

two-stroke engines Petro-Canada Two-Cycle Motor Oil

• For use in air-cooled, 2-stroke cycle engines.




• Mixes easily with gas and pumps down to -40˚C/-40˚F.

• Low smoke emissions and low ash levels.

• Dyed blue/green for easy detection of gasoline/oil mixtures.

• Suitable for use against JASO FA or FB, ISO-L-EGB.


• Suitable for use in air-cooled applications where API TC and TISI quality oils are recommended such as Husqvarna, STIHL, Poulan-Weedeater, Lawnboy, Tecumseh, Toro, Ryobi, Briggs&Stratton, Yamaha, etc.

14

* The NMMA TC-W3 classification is registered by the National Marine Manufacturers Association.

TAckIFIED prODUcTS, pApEr mAcHINE OILS & SAw GUIDES


• Petro-Canada provides a complete line of oils for your chain, paper machine and saw guide needs.

Saw Guide OilsAPPlICATION PRODUCT PERFORMANCE FEATURES

Multi-blade, gang saws and edgers

PETROGLIDE™ • Less wash-off and better lubricity.• Greater recovery with excellent extreme pressure properties.• Pitch Control Additives and Rust Inhibitor keeps blades cleaner.• Free of heavy metals.• Available in the following viscosity grades: 68, 100, 150.• Reduces consumption of water and oil.• Less guide changes and less saw changes results in higher production at end of day.

Mist lubricated bandsaws PETROGLIDE MC 32 • Lubricates without excessive spray mist to reduce oil usage.• Less wash-off resulting in reduced oil consumption.• Reduced friction. • Rust inhibitor keeps blades cleaner.• Available in viscosity grade: 32.

gang saws, curve saws and arbour edgers

PETROGLIDE XP 90 • Provides optimum tackiness and reduced friction for increased recovery rates and productivity.• Less wash-off and better lubricity.• Greater recovery with excellent extreme pressure properties.• Inherently biodegradable and free of heavy metals.• Rust inhibitor keeps blades cleaner.• Available in viscosity grade: 90.

Paper Machine OilsAPPlICATION PRODUCT PERFORMANCE FEATURES

Paper machine oil SEPRO™ XL • Resists oil degradation better than conventional competitive fluids.

• Ashless, free of harmful metals formulation recommended for environmentally-sensitive areas.

• Extended life lubricant formulated for excellent water separation, rust and corrosion protection, and wear protection.

• Available in the following viscosity grades (non-dyed): 150, 220.

Tackified lubricantsAPPlICATION PRODUCT PERFORMANCE FEATURES

chains, guide bars, journal bearings, sprockets and chain saws

DURATAC™ Chain Oil • Economical, tacky. Dark colour.

• Designed to reduce dripping and throw-off.

• Also for general machine lubrication where a tacky, non-drip oil is required.

• Available in the following viscosity grades: 32 (dyed red), 68, 100, 150 (dyed red).

Ideal for use in printing shops, saw mills and for chain saw bars and conveyor chains

DURATAC Non-Drip Oil • Adheres strongly to metal surfaces. Light colour.

• Can be used as a general purpose lubricant where oil control or tackiness is required.

• Available in the following viscosity grades: 32, 68, 100, 150, 220.

15

mULTI-AppLIcATION GrEASES

Do You oPerate IN MININg?

NOYES – See page 19

NO

Is the application high load, slow moving?

YESNO

YES

NO

NO

NO

YES – See page 38

YES

VULTREX MPG Synthetic Arctic• VULTREX MPG

Synthetic Arctic is recommended for centralized greasing systems on heavy duty off-highway and mining equipment, operating in extreme low temperature conditions.

• Delivers excellent EP and anti-wear properties.

PEERLESS OG (0, 1, 2, 2 Red, PLUS)• PEERLESS OG is a multi-application,

long-life grease.• Formulated for lubricating loaded

bearings, universal joints, and chassis in industry, transport, marine and offshore applications operating in very wet, dusty and/or dry conditions.

• NLGI GC-LB* (except OG 0 & OG PLUS).

PRECISION Synthetic• PRECISION Synthetic is a long-life,

premium performance, extreme pressure lithium-complex NLGI #1 grease containing synthetic base oil.

• Specially formulated to provide protection over a wide range of operating temperatures, for all-season protection.

• NLGI GC-LB*.

VULTREX MPG (EP1 & EP2)• VULTREX MPG EP1 is designed

for centralized greasing systems on heavy duty gear and bearing applications.

• VULTREX MPG EP2 is recommended for heavy duty gear and bearing applications operating at low speed and higher temperatures.

Widest Temperature(-40˚C/-40˚F to 170˚C/338˚F)

Moderate Temperature(-25˚C/-13˚F to 160˚C/320˚F)

Do you require a Food Grade grease?

YES

Is extreme water resistance and tolerance required?

* These greases meet the NLGI Automotive Service Classification GC-LB for wheel bearing and chassis lubrication.

Note: Temperature ranges listed are “operating temperatures.” 16

Is very high base oil viscosity required?

YES

NO YES

What is your required operating temperature range?

PEERLESS LLG• PEERLESS LLG is an NLGI #2 grease that provides

extended service life at extreme temperatures.• Recommended for long-life applications such

as “sealed-for-life” bearings or constant velocity joints, as well as bearings and slide-ways operating continuously at temperatures up to 200˚C/392˚F.

• NLGI GC-LB*.

High Temperature (-20˚C/-4˚F to 200˚C/392˚F)

Is high base oil viscosity required

Is low temperature performance required?

Low Temperature(-45˚C/-49˚F to 120˚C/248˚F)

PRECISION Synthetic Heavy 460• PRECISION Synthetic Heavy 460 is

an NLGI #1.5 grade grease designed primarily for the lubrication of dryer felt-roll bearings in paper machines, where extended life at high temperatures is needed and frequent replenishment is not possible.

Low Temperature (-30˚C/-22˚F to 170˚C/338˚F)

Moderate Temperature (-20˚C/-4˚F to 170˚C/338˚F)

PRECISION Synthetic Heavy 1500• PRECISION Synthetic Heavy 1500 is an

NLGI #1.5 grade grease designed for service in plain as well as rolling element bearings operating at low speeds, heavy loads and high temperatures; conditions encountered in mining, construction and forestry applications

PerForMaNce beNeFItS• PRECISION™ Synthetic and XL greases can last up to 3 times longer

(ASTM D3527) than leading competitor brands, while providing advanced protection and helping to lower maintenance costs.

• PRECISION Synthetic greases deliver high performance in wide operating conditions for enhanced protection and savings.

• PRECISION XL greases are versatile, premium performance, long-life, lithium/lithium-complex greases.

• PRECISION XL Moly greases are lithium greases formulated with 3% and 5% molybdenum disulphide.

• PEERLESS™ LLG is a high-performance, calcium sulphonate complex grease, for high temperature, wet and very long-life applications.

• PEERLESS OG is formulated for the lubrication of loaded bearings, universal joints and chassis operating in very severe wet, dusty and/or dry conditions.

• VULTREX™ MPG, G-123 & G-124 greases provide excellent lubrication for off-road equipment, resulting in outstanding service life and longer equipment protection.

YESNO

Do you have a 5% Moly requirement?


and hardy shock-loading capacity

Moderate Temperature

(-25˚C/-13˚F to 135˚C/275˚F)


YES

NO

PRECISION XL 3 Moly• PRECISION XL 3 Moly greases are

lithium-based greases compounded with 3% Molybdenum disulphide.

• Suited for tough, heavy duty shock loaded equipment in industrial and off-highway applications.

• Suitable for truck fifth wheels, chassis, kingpins and linkages.

• Medium to high viscosity grease.• Available in EP1 and EP2 (-15°C/5°F)

grades.• Both grades are on the Certified

Lubricants Listing for the Caterpillar Global Mining (formerly Bucyrus International) grease specification SD 4711 (Multi-Purpose Grease).

• Also available in an Arctic grade (-45˚C/-49˚F to 135˚C/275˚F).

PRECISION XL 5 Moly • PRECISION XL 5 Moly greases are compounded with

5% Molybdenum disulphide.

• Designed to meet Caterpillar lubricant specifications for their 5130 (7TJ & 5ZL), 5230 (7LL) model Mining Excavators and 994 (9YF) model Wheel Loaders.

• Medium viscosity grease.

• Available in EP1 and EP2 (-25°C/-13°F) grades.

• Also available in an EP0 grade (-50˚C/-58˚F to 120˚C/248˚F).

• EP0 is on the Certified Lubricants Listing for the Caterpillar Global Mining (formerly Bucyrus International) grease specification SD 4711 (Multi-Purpose Grease).

Multi-Application Requirement

Does your application require a grease for

shock loading?


(-25˚C/-13˚F to 135˚C/275˚F)

Wide Temperature(-25˚C/-13˚F to 135˚C/275˚F) and hardiest

shock-loading capacity


PRECISION GP Moly EP2• PRECISION General Purpose Moly EP2 is a lithium-based, multi-application grease

incorporating lower Molybdenum disulphide/graphite and EP additives.

• Suited for applications in truck fleets, mobile equipment and plant machinery which require a grease with extreme pressure (EP) and shock resistant properties.

• Medium viscosity grease.

PRECISION Synthetic Moly• PRECISION Synthetic Moly

is an NLGI #1 grease compounded with 3% Molybdenum disulphide.

• Formulated to provide excellent protection over a wide range of operating temperatures.

• Outstanding cold weather performance.

• Excellent high temperature lubrication.

PRECISION GP• PRECISION GP is a lithium-based

extreme pressure grease for moderate temperature ranges and water resistance.

• Designed for operations requiring a general multi-application grease.

• Available in EP1 (-30°C/-22°F) and EP2 grades.

PRECISION XL (EP1 & EP2)• PRECISION XL EP1 and EP2

lithium-complex extreme pressure greases are specially designed for heavy duty and general purpose bearing applications.

• Use EP2 for low and high speeds, and in grease gun application for a wide range of equipment and conditions.

• Applications include automotive wheel bearings, chassis points on highway and off-highway vehicles and industrial machinery.

• Use EP1 as a winter alternative to EP2 (-20°C/-4°F) for greater mobility at low temperatures.

• NLGI GC-LB*.

Wide Temperature(-25˚C/-13˚F to 160˚C/320˚F)

Wide Temperature(-30˚C/-22˚F to

135˚C/275˚F) and hardiest shock-loading

capacity

mINING GrEASES

VULTREX MPG Synthetic Arctic• VuLtreX mPG Synthetic

arctic is recommended for centralized greasing systems on heavy duty off-highway and mining equipment, operating in extreme low temperature conditions.

• delivers excellent eP and anti-wear properties.

YES

Is the application high load, slow moving?

Do You reQuIre a greaSe For aN oPeN gear aPPLIcatIoN?

YESNO


NOYES

NO

NO

ModerateTemperature

(-25˚C/-13˚F to 135˚C/275˚F)

NO

YES

Does your application require a grease

for heavy loading or shock loading?

PRECISION Synthetic• PrecISIon Synthetic is a long-life, premium

performance, extreme pressure lithium-complex nLGI #1 grease containing synthetic base oil.

• Specially formulated to provide protection over a wide range of operating temperatures, for all-season protection.

• nLGI Gc-LB*.

VULTREX MPG (EP1 & EP2)• VuLtreX mPG eP1 is

designed for centralized greasing systems on heavy duty gear and bearing applications.

• VuLtreX mPG eP2 is recommended for heavy duty gear and bearing applications operating at low speed and higher temperatures.


Widest Temperature

(-40˚C/-40˚F to 170˚C/338˚F)

PRECISION GP• PrecISIon GP is a lithium-based

extreme pressure grease for moderate temperature ranges and water resistance.

• designed for operations requiring a general multi-application grease.

• available in eP1 (-30°c/-22°f) and eP2 grades.

PRECISION XL 3 Moly• PrecISIon XL 3 moly greases

are lithium-based greases compounded with 3% molybdenum disulphide.

• Suited for tough, heavy duty shock loaded equipment in industrial and off-highway applications.

• Suitable for truck fifth wheels, chassis, kingpins and linkages.

• medium to high viscosity grease.

• available in eP1 and eP2 (-15°c/5°f) grades.

• Both grades are on the certified Lubricants Listing for the caterpillar Global mining (formerly Bucyrus International) grease specification Sd 4711 (multi-Purpose Grease).

• also available in an arctic grade (-45˚c/-49˚f to 135˚c/275˚f).


(-25˚C/-13˚F to 160˚C/320˚F)

PRECISION XL (EP1 & EP2) • PrecISIon XL eP1 and eP2 lithium-complex extreme

pressure greases are designed for heavy duty and general purpose bearing applications.

• use eP2 for low and high speeds, and in grease gun application for a wide range of equipment and conditions.

• applications include automotive wheel bearings, chassis points on highway and off-highway vehicles and industrial machinery, such as mining, mills and crushers.

• use eP1 as a winter alternative to eP2 (-20°c/-4°f) for greater mobility at low temperatures.

• nLGI Gc-LB*.

PRECISION Synthetic Moly• PrecISIon Synthetic moly is an

nLGI #1 grease compounded with 3% molybdenum disulphide.

• formulated to provide excellent protection over a wide range of operating temperatures.

• outstanding cold weather performance.

• excellent high temperature lubrication.


* These greases meet the NLGI Automotive Service Classification GC-LB for wheel bearing and chassis lubrication.

Do you have a 5% Moly requirement?



PRECISION Synthetic Heavy 460• PrecISIon Synthetic Heavy

460 is an nLGI #1.5 grade grease designed primarily for the lubrication of dryer felt-roll bearings in paper machines, where extended life at high temperatures is needed and frequent replenishment is not possible.

PRECISION Synthetic Heavy 1500• PrecISIon Synthetic Heavy

1500 is an nLGI #1.5 grade grease designed for service in plain as well as rolling element bearings operating at low speeds, heavy loads and high temperatures; conditions encountered in mining, construction and forestry applications.



(-20˚C/-4˚F to 170˚C/338˚F)

Low Temperature

(-30˚C/-22˚F to 170˚C/338˚F

YESNO

YES Is very high base oil viscosity required?

Is low temperature performance required?

Low Temperature

(-45˚C/-49˚F to 120˚C/248˚F)

Is high base oil viscosity required?

YESNO

PerForMaNce beNeFItS• Petro-Canada’s VULTREX™ OGL is perfect for large, heavy duty, open

and enclosed gear drives, as well as bearings and exposed sliding surfaces – commonly found in open pit mining.

• VULTREX MPG, G-123 and G-124 greases provide excellent lubrication for off-road equipment, resulting in outstanding service life and longer equipment protection.

• VULTREX GEAR SHIELD† NC provides lubrication of open gear sets, SAG and Ball Mills.

• PRECISION™ greases can last up to 3 times longer (ASTM D3527) than leading competitor brands, while providing advanced protection and helping to lower maintenance costs.

• PRECISION XL EP1 and EP2 greases are versatile, premium performance, long-life, lithium-complex greases.

Enclosed Gear

VULTREX OGL Synthetic All Season 680 Open Gear Lubricant• Is designed for mining shovels,

draglines, excavators, and back drills.• Wide operating temperature range

enables year-round use at most mines.• Solvent free.• meets the caterpillar Global mining

(formerly Bucyrus International) Sd 4713 specification.

• meets P&H 464 specification.

VULTREX OGL Heavy 6200 Open Gear Lubricant• Is formulated with a more

viscous base oil for the most heavily loaded gears at warmer ambient temperatures.

• Solvent free.• meets the caterpillar Global

mining (formerly Bucyrus International) Sd 4713 specification, including hoist gear lubrication requirement.

• meets P&H 464 specification.

VULTREX GEAR SHIELD NC• Is a semi-fluid lubricant

designed for the open gear systems found in many types of ore-crushing mills.

• meets requirements of most major mill and gear manufacturers.

VULTREX EGF-1000 Enclosed Gear Lubricant• Is a semi-fluid grease

for heavily-loaded enclosed gearboxes.

• also recommended for enclosed gear drives of underground locomotives.

VULTREX OGL Synthetic Arctic Open Gear Lubricant• Has proven performance in very cold

temperatures encountered in sub-arctic regions in winter.

• Solvent free.• meets the caterpillar Global mining

(formerly Bucyrus International) Sd 4713 specification.

• meets P&H 464 specification

ModerateTemperature

(-25˚C/-13˚F to 135˚C/275˚F)

LowTemperature

(-50˚C/-58˚F to 10˚C/50˚F)

WideTemperature

(-40˚C/-40˚F to 40˚C/104˚F)

HighTemperature(-5˚C/23˚F to 60˚C/140˚F)

PRECISION GP Moly EP2• PrecISIon General Purpose moly eP2 is a lithium-based, multi-application grease

incorporating lower molybdenum disulphide/graphite and eP additives.• Suited for applications in truck fleets, mobile equipment and plant machinery

which require a grease with extreme pressure (eP) and shock resistant properties.• medium viscosity grease.

Mill Open Gear


(-30˚C/-22˚F to 50˚C/122˚F)


Open Gear

Surface

VULTREX OGL Synthetic 2200• for summer use, or year round

use in warmer climates.• Solvent free.• meets the caterpillar Global

mining (formerly Bucyrus International) Sd 4713 specification.

• meets P&H 520 and 464 specifications.

†Gear Shield is a registered trademark of Petron corp.; Petro-canada is a registered user.


PRECISION XL 5 Moly• PrecISIon XL 5 moly greases are

compounded with 5% molybdenum disulphide.

• designed to meet caterpillar lubricant specifications for their 5130 (7tJ & 5ZL), 5230 (7LL) model mining excavators and 994 (9Yf) model Wheel Loaders.

• medium viscosity grease.• available in eP1 and eP2 (-25°c/-13°f)

grades.• also available in an eP0 grade

(-50°c/-58°f to 120°c/248°f)• eP0 is on the certified Lubricants Listing

for the caterpillar Global mining (formerly Bucyrus International) grease specification Sd 4711 (multi-Purpose Grease).

SpEcIALTY GrEASES

Other Gear Specialty ProductsAPPlICATION PRODUCT GC PERFORMANCE FEATURES OPERATING TEMPERATURE

Slow moving gears and chains, clutch mechanisms on hoists, head frames

VULTREX Gear Dressing EP

• High quality water and heat resistant lubricant with excellent film characteristics that provide increased protection against abnormally heavy loads and pressures.

• Specially formulated for lubrication of industrial open gears and chains when applied by a caulking gun.

20˚C/60˚F to 80˚C/176˚F

Drilling CompoundsAPPlICATION PRODUCT GC PERFORMANCE FEATURES OPERATING TEMPERATURE

Lubrication and prevention of galling of pipe joints and collars

VULTREX Tool Joint Compound

• Apply to pipe connections to prevent galling and provide a positive seal against drilling mud pressures.

• Contains 51% of finely powdered zinc and conforms to API Specification 7, Appendix 7 “Recommended Thread Compounds for Rotary Shouldered Connections.”

N/A

Lubrication and prevention of galling on casing, tubing and line pipe threads

VULTREX API Modified Thread Compound

• Designed to protect threads from galling and provide a positive seal against drilling fluids.

• Contains 64% solids (graphite, lead, zinc and copper) and conforms to API Bulletin 5A2 on “Thread Compounds for Casing, Tubing and Line Pipe.”

N/A

Specialty Rock Drill/Diamond Drill GreasesAPPlICATION PRODUCT GC PERFORMANCE FEATURES OPERATING TEMPERATURE

air-operated rock drills

VULTREX Rock Drill EP000

• Lithium semi-fluid grease specially formulated for mist-free operation when used to lubricate air-operated rock drills and similar mining equipment.

• Meets the requirements of rock drill manufacturers, such as Ingersoll-Rand, Joy, Parts Headquarters and other manufacturers.

-30ºC/-22ºF to 100ºC/212ºF

Diamond Drill rods VULTREX Drill Rod Heavy Grease

• Barium-complex grease recommended for use on diamond drill rods where it reduces friction between the rod and rock strata.

• Lubricates successfully to more than 2,000 foot drill depths without wash-off or wipe-off.

-12ºC/10ºF to

135ºC/275ºF

Specialty Greases for High TemperaturesAPPlICATION PRODUCT GC PERFORMANCE FEATURES OPERATING TEMPERATURE

High temperature applications where the grease does not carbonize

THERMEXTM • An NLGI#2 grease formulated with a silica gel thickener and a synthetic base fluid that vaporizes slowly at high temperatures leaving little or no deposit.

• Regular re-greasing required.

260°C/500°F+

GC = Grease Colour

20


• PRECISIONTM greases can last up to 3 times longer (ASTM D3527) than leading competitor brands, while providing advanced protection and helping to lower maintenance costs.

• PEERLESSTM is formulated for the lubrication of loaded bearings, universal joints and chassis operating in very severe wet, dusty and/or dry conditions.

• VULTREXTM MPG, G-123 and G-124 greases provide excellent lubrication for off-road equipment, resulting in outstanding service life and longer equipment protection.

• VULTREX GEAR DRESSING EP is designed for enhanced gear protection.

• VULTREX API MODIFIED THREAD COMPOUND and VULTREX TOOL JOINT COMPOUND are designed for lubrication and prevention of galling of pipe threads, collars and connections.

• VULTREX ROCK DRILL EP000 is designed for mist-free lubrication of rock drills and in-line pneumatic systems.

• VULTREX DRILL ROD HEAVY is specially designed to reduce friction between rod and rock strata for diamond drilling.

General Manufacturing

APPlICATION PRODUCT GC PERFORMANCE FEATURESOPERATING

TEMPERATUREDryer felt-roll bearings in paper mills

PRECISION Synthetic Heavy 460

• Synthetic high temperature long-life EP lithium- complex grease is specially formulated for dryer felt-roll bearings in paper machines.

-30˚C/-22˚F to 170˚C/338˚F

electric motor bearings PRECISION XL EMB • Specifically designed for electric motors meeting CGE specification 6298 for class B or F insulation.

-25˚C/-13˚F to 160˚C/320˚F

PRECISION SYNTHETIC EMB • Recommended for electric motor applications that are exposed to wider temperature range.

-40˚C/-40˚F to 170˚C/338˚F

PEERLESS LLG • Calcium Sulfonate Complex grease for high temperature where Polyurea greases are recommended.

-20˚C/-4˚F to 200˚C/392˚F

Heavy duty truck components VULTREX G-123

VULTREX G-124

• Are red tacky greases designed to lubricate heavy duty truck components, such as wheel bearings, bushings, kingpins and chassis points found on vehicles operated by the mining, forestry and transportation industries.

-25˚C/-13˚F to 160˚C/320˚F

-20˚C/-4˚F to 160˚C/320˚F

High-speed flexible couplings PEERLESS XCG FLEX • An ideal choice for use in high-speed flexible couplings, where severe centrifugal forces are generated.

-20˚C/-4˚F to 163˚C/325˚F

Internal parts of valves used in natural gas plants

PEERLESS SVG 102 • Specially formulated for the lubrication of the internal parts of valves employed in the production and distribution of sour gas in natural gas plants.

-35˚C/-31˚F to 163˚C/325˚F

Poorly sealed enclosed gearboxes PRECISION XL EP000 • Formulated for poorly sealed enclosed gearboxes, e.g. continuous miner.

-25˚C/-13˚F to 100˚C/212˚F

rail curves PRECISION XL Rail Curve • Rail curve grease is a water-resistant, graphite grease suitable for all-season use in mechanical applicators of trackslide lubrication systems (Portec, Lincoln) as well as on-board lubrication systems, such as the Clicomatic system.

-50˚C/-58˚F to 120˚C/248˚F

Steel mills PRECISION XL Heavy Duty • For heavy duty service applications. Alternative for high load, slow moving applications if low temperature performance is not required.

-10˚C/14˚F to 160˚C/320˚F

trailer end hub axle bearings PRECISION Synthetic EP00 • Specially formulated for rear end assemblies on trailers.

-40˚C/-40˚F to 170˚C/338˚F

on-board lubrication systems PRECISION XL EP00 • Semi-fluid lithium grease designed for on-board lubrication systems.

• Handles auto-greasing points on a truck.

-35˚C/-31˚F to 100˚C/212˚F

GC = Grease Colour

21

INDUSTrIAL GEAr OILS

HARNEX™ Wind Turbine Gear Oil• A premium synthetic lubricant

designed to provide exceptional anti-wear/EP as well as protection from salt water corrosion.

• HARNEX is specially formulated for lubricating onshore and offshore wind turbine gearboxes.

• Available in 320 grade.

ENDURATEX Synthetic EP• Uses advanced synthetic base

oils and additive technologies to deliver reduced friction, excellent low temperature fluidity and outstanding oxidative and thermal stability, which can mean extended fluid and component life.

• Available in 150, 220, 320 and 460 grades.

ENDURATEX XL Synthetic Blend• Multigrade EP gear oil

designed to eliminate seasonal change-outs.

• Recommended for lubricating oil filled pump jack gearboxes and other industrial gearbox applications.

• Excellent low temperature properties, which allow it to be used in all but the most extreme conditions.

• Available in 68/150 and 68/220 multi grades.

ENDURATEX EP• Delivers sustained anti-wear

extreme pressure protection to industrial gear drives and bearings.

• Available in 32, 68, 100, 150, 220, 320, 460, 680 and 1000 grades.

YES NO

DoeS tHe oeM SPecIFIcatIoN recoMMeND aN extreMe

PreSSure (eP) oIL?

YES NO

NOYES

NOYES

Do you need wide temperature capabilities?

Does your equipment require a synthetic fluid to operate over a wide temperature

range and/or high temperatures?

Do you need a specialty wind turbine gear oil?

22


• SYNDURO™ SHB family of synthetic multifunctional fluids is formulated for lubricating air compressors, gears and bearings operating under mild EP loads over wide temperature ranges.

• TURBOFLO™ R&O oils are high quality lubricants designed for use in steam and hydro turbines, as well as circulating oil systems in a wide range of industrial machinery.

• ENDURATEX™ Synthetic EP gear oils are fully synthetic and specifically designed for enclosed gearboxes operating under very demanding conditions in wide temperature extremes.

• ENDURATEX EP gear oils are high quality, extreme pressure lubricants designed for use in enclosed industrial gear drives operating under normal, heavy or shock loading conditions.

SYNDURO SHB Synthetic Lubricant• Delivers excellent component

protection for equipment operating at high speed or mild EP loads over a wide temperature range during extended service intervals.

• Available in 32, 46, 68, 150, 220 and 460 grades.

TURBOFLO R&O/Premium R&O 77 Turbine/Circulating Oils• Primarily recommended for steam and

gas turbines as well as circulating oil systems for a wide range of industrial machinery.

• Minimizes corrosion and oxidation.

• Extended resistance to oil breakdown caused by air and high temperatures.

• Available for R&O Circulating Oil applications in viscosity grades: 10, 22, 32, 46, 68, 100,150, 220, 320 and Premium R&O 77.

• Available for Turbines in viscosity grades: 32,46,68,100 and Premium R&O 77.

YES NO

ENDURATEX Mild Worm Gear Oil• Non-EP lubricant for service in

some worm gear reducers and reciprocating steam engines.

• Formulated to provide high viscosity, high film strength, high flash point and rust protection.

• Available in 460, 680 and 1000 grades.

YES

Do you need an R&O (non-EP) oil for bearing lubrication?

23

Do you need mild EP equipment protection?

INDUSTrIAL HYDrAULIc FLUIDS

HYDREX XV All Season• HYDREX XV All Season performs in

industrial machinery that has to be started at temperatures as low as -40˚C/-40˚F and performs equally well at temperatures as high as 79°C/174°F.

• HYDREX XV All Season performs exceedingly well in a wide range of industrial machinery and mobile equipment used in such industries as forestry, construction, mining, public utility and marine operations.


HYDREX AW• HYDREX AW is recommended

for heavy duty hydraulic applications requiring outstanding wear protection.

• HYDREX AW fluids have both excellent thermal stability and oxidation life, which could extend intervals between change-outs and excellent protection against corrosion and varnish.

• Available in grades 22, 32, 46, 68, 80 and 100.

HYDREX MV• HYDREX MV is recommended for

heavy duty hydraulic applications operating at high pressures and in wide temperature range conditions.

• They are ideally suited for piston, gear and vane pumps found on industrial machinery and mobile equipment.

• These fluids offer minimal fluid friction at low start-up temperatures and excellent protection at high operating temperatures.



YESNO

Normal Temperatures/ Normal Loads

Can you consolidate Viscosity Grades?

Neither Food Grade nor Environmentally sensitive

Wider Temperature Ranges/ High Loads

NO

YES

YES

are tHe HYDrauLIcS uSeD IN aN eNvIroNMeNtaLLY SeNSItIve or

FooD graDe area?

24


• HYDREXTM AW are premium performance, long-life anti-wear hydraulic fluids.

• HYDREX MV are designed for use in wide temperature ranges.

• HYDREX XV All Season is recommended for year-round use in equipment that must perform in both low and high temperature ranges. Potential energy efficiencies could be realized with this product versus monograde products.

• ENVIRONTM AW monograde hydraulic fluids are designed for use in equipment used primarily in environmentally sensitive areas.

• ENVIRON MV fluids are designed for year-round use in equipment operating in wide temperature ranges, particularly in environmentally sensitive areas.

SPecIaLtY HYdrauLIcS

aPPLIcatIon

HYdreX extreme

• designed for extremely wide temperature protection for high and severe low temperatures. for industrial machinery, the temperature range is -35ºc/-31ºf to +68˚c/+154˚f.

• oxidation stability helps extend drains and reduces sludge build-up and varnish deposits.

• It is free of heavy metals, is non-toxic, inherently biodegradable according to oecd 301B protocols and recommended for vane, gear and axial piston hydraulic pumps used in marine, forestry, mining and other hydraulic systems.

• HYdreX extreme is suitable for use in Liebherr cranes.

HYdreX mV arctic 15

• Premium, high performance fluid designed for extremely cold temperature operations.

• Inherently biodegradable according to oecd 301B and recommended for use in arctic climates, allowing hydraulic systems to start at temperatures as low as -45°c/-49°f under no load conditions.

HYdreX dt 46

• Special anti-wear detergent/dispersant hydraulic fluid containing the same anti-oxidant chemistry as HYdreX aW.

• for use in systems prone to contamination.

OTHER PRODUCTS

ENVIRON AW• ENVIRON AW is free of heavy


• It is formulated to provide outstanding anti-wear protection to extend equipment life.

• Exceptional oxidation stability provides long oil life for fewer change-outs and minimizes sludge and varnish deposits.


ENVIRON MV• ENVIRON MV is free of heavy


• Formulated for both indoor and outdoor seasonal use.

• Its formulation provides outstanding anti-wear protection to extend equipment life.

• Exceptional oxidation stability means long oil life for fewer change-outs and minimizes sludge and varnish deposits.


• Available in grades 32 and 46.

YES – See page 36

Food Grade

Normal Temperatures/ Normal Loads

Wide Temperature Ranges

Environmentally sensitive

25

TUrBINE FLUIDS & wIND TUrBINE GEAr OILS

Turbine FluidsAPPlICATION PRODUCT PERFORMANCE FEATURES CREDENTIAlS

Heavy duty steam, hydraulic and gas turbines

TURBOFLO XL • Premium turbine fluid designed to lubricate and cool heavy duty steam, hydraulic and gas turbines and deliver excellent lubrication to bearings operating in severe conditions.

• Excellent oxidation and thermal stability provides extended drain capabilities even in extreme conditions.

• Ideal for extended drain top-ups.

• Extremely rapid air and gas separation.

• Exceptional resistance to fluid breakdown caused by air and high temperatures.

• Available in viscosity grades: 32, 46 and 68.

• TURBOFLO XL fluids are suitable for use in steam and gas turbines requiring the following manufacturer and industry specifications:– General Electric (GEK 32568F, GEK 46506E).– Siemens TLV 9013 05 (non EP) (ISO 32 and 46 only).– Siemens/Westinghouse (1500 00 20, 5512 5Z3).– Solar (ES 9-224V).– ALSTOM/ABB (HTGD 90117), K110 812101.– DIN 51515.– ASTM D4304 Type I (non-EP). – JIS (K 2213 Type 2).

Heavy duty turbines with common gear and bearing lubrication systems

TURBOFLO EP • Premium turbine fluid designed to provide exceptional anti-wear protection of geared heavy duty turbines with common gear and bearing lubrication systems.

• Delivers excellent lubrication to bearings operating in severe conditions.

• Excellent oxidation stability provides extended drain capabilities even in extreme conditions.

• Ideal for extended drain top-ups.

• Single fluid for steam and gas turbines in both geared and non-geared applications.

• Available in viscosity grades: 32 and 46.

• TURBOFLO EP fluids are suitable for use in steam and gas turbines requiring the following major manufacturer and industry specifications:– General Electric (GEK 101941A, GEK 32568F,

GEK 46506E, GEK 28143A).– Siemens TLV 9013 05 (EP).– Siemens/Westinghouse (1500 00 20, 5512 5Z3).– Solar (ES 9-224V).– ALSTOM/ABB (HTGD 90117), K110 812101.– DIN 51515.– ASTM Type II (EP).– JIS (K 2213 Type 2).

Steam, hydraulic and gas turbines

Industrial machinery

TURBOFLO • Designed to lubricate and cool steam, hydraulic and gas turbines and deliver excellent lubrication to bearings.

• Exceptional resistance to fluid breakdown caused by air and high temperatures.


• Excellent water separability, as well as rapid air and gas separation.

• Available in viscosity grades: 32, 46 and 68.

• TURBOFLO fluids are suitable for use in steam and gas turbines requiring the following manufacturer and industry specifications:– General Electric (GEK 32568F, GEK 46506E).– Siemens TLV 9013 05 (non EP) (ISO 32

and 46 only).– ALSTOM/ABB (HTGD 90117), K110 812101.– Siemens/Westinghouse (1500 00 20) 5512 5Z3.– Solar (ES 9-224V).– ASTM D4304 Type I (non-EP).– JIS (K 2213 Type 2).– DIN 51515

turbine /circulating oils

TURBOFLO R&O, Premium R&O 77

• Primarily recommended for steam and gas turbines as well as circulating oil systems for a wide range of industrial machinery.


• Extended resistance to oil breakdown caused by air and high temperatures.

• Available for R&O circulating oil applications in viscosity grades: 10, 22, 32,46, 68, 100, 150, 220, 320, and Premium R&O 77.

• Available for turbines in viscosity grades: 32, 46, 68, 100 and Premium R&O 77.

• TURBOFLO R&O Oils 32, 46, 68 and Premium R&O 77 are suitable for use in various turbines requiring the following manufacturer and industry specifications:– General Electric (GEK 46506E).– Siemens/Westinghouse (1500 00 20) 5512 5Z3.– Siemens (TLV 9013 04 (non-EP)).– ALSTOM/ABB (HTGD 90117), K110 812101.– Solar (ES 9-224V).– ASTM D4304 Type I (non-EP).– JIS (K 2213 Type 2).

• Premium R&O 77 meets Canadian General Standards Board (CGSB) specification 3-GP-357c, NATO Symbol 0-240 and British DEF-STAN 91-25.

• TURBOFLO R&O 46 is approved against GM LS-2.

26


• TURBOFLO™ line of turbine and R&O fluids deliver excellent lubrication and cooling to steam and gas turbines and perform well as general purpose circulating oil in various industrial applications.

• TURBOFLO fluids exhibit excellent thermal and oxidative stability and they outperform many leading competitive lubricants in various tests including RPVOT performance.

• HARNEX™ provides exceptional anti-wear/EP and protection from salt water corrosion.

• TURBONYCOIL 600 provides excellent performance for land-based aeroderivative gas turbines which require a lubricant qualified against U.S. Military Specification MIL-PRF-23699F Standard (Non-Corrosion Inhibiting) Classification.

Wind Turbine Gear OilAPPlICATION PRODUCT PERFORMANCE FEATURES CREDENTIAlS

Wind turbines operating onshore and offshore

HARNEX 320 • Designed using polyalphaolefin (PAO) chemistry that delivers good oil film thickness over a broad temperature range.

• Provides exceptional anti-wear/EP and protection from salt water corrosion.

• Helps protect against micropitting and scuffing of gear teeth.

• Resists rust and corrosion for smooth operation.

• Meets following specifications:

– AGMA 9005-EO2.

– DIN 51517-3 (CLP 320).

Aeroderivative Gas Turbine FluidAPPlICATION PRODUCT PERFORMANCE FEATURES CREDENTIAlS

Land-based aeroderivative gas turbines

(Not for aviation-based applications)

TURBONYCOIL 600 • TURBONYCOIL 600 is specially designed to effectively lubricate land-based aeroderivative gas turbines operating under extreme conditions.

• Is based on polyol esters with high thermal stability and fortified with anti-oxidant, anti-wear and anti-corrosion additives.

• Offers lower volatility and higher flash point than many competitive fluids.

• Excellent operation in extreme hot and cold environments.

• Does not contain additives with Tri-Cresyl Phosphate (TCP) which contains recognized neurotoxin properties.

• Approved by:

– CFM International

– International Aero Engines

– Turbomeca

– Allison/Rolls Royce

– Pratt & Whitney Canada

– Rolls Royce

– Hamilton/Sundstrand/APIC

– Honeywell

– General Electric

• Meets following specifications:

– Joint Service OX-27/OX-28

– NATO O-156

– DEF STAN 91-101 Iss.3, Amd. 1

– MIL - PRF-23699 F Class STD

– SAE AS5780 SPC

Note: TURBONYCOIL 600 is a registered trademark of NYCO SA.

27

NATUrAL GAS ENGINE OILS

SENTRON 470 (0.57% wt ash)

• SENTRON 470 is designed for use where added high temperature control is needed.

• Ideal for use in engines fitted with catalytic converters.

• Ideal for severe service applications.

SENTRON LD 5000 (0.57% wt ash)

• SENTRON LD 5000 provides excellent performance for up to 200% longer drain intervals and exceptional overall engine protection for maximum reliability and savings.*

• Advanced piston cleanliness.

• Petro-Canada recommends for use in Caterpillar, Waukesha, GE Jenbacher, MWM, MAN, MTU and Wartsila and other turbocharged or naturally aspirated, stoichiometric or lean burn engines that require low ash gas engine oil.

• Suitable for use in engines with catalytic converters.

WHat IS tHe aSH LeveL You reQuIre?

YES

Are you interested in extending drains?

YES

NODo you operate in

severe service conditions?

(eg. high temperature control required)

NO

NO

SENTRON LD SYNTHETIC BLEND (0.51% wt ash)

• Pour Point: -42˚C/-44˚F

• A multi-grade synthetic blend formulation offering advanced piston cleanliness and cold start-up performance down to -25˚C/-13˚F.


• Petro-Canada recommends for use in Caterpillar, Superior, Waukesha, and other turbocharged or naturally aspirated, stoichiometric or lean burn engines and require low ash gas engine oil.


Are you looking for cold start-up performance?

LD SYNTHETIC BLEND

YES

Low Ashbelow (0.1% - 0.6% wt)


• SENTRON 445 is recommended for use in 4-stroke cycle and some larger 2-stroke cycle gas engines.

• Suitable for use in engines fitted with catalytic converters.

• Provides excellent performance in high output turbocharged engines that prefer a low ash oil, providing excellent control of engine deposits.

YES


• SENTRON 590 provides excellent control of engine deposits, and is especially catered towards engines that operate in severe nitrating conditions.

• Field tested in Caterpillar 3300 and 3500 turbocharged engines.


Do you have a stoichiometric engine

operating in high nitrating conditions?

* Performance results may vary due to factors such as, but not limited to, engine optimization, load, fuel gas quality, proper maintenance, type of engine and application.28


• SENTRON™ Natural Gas Engine Oils are premium performance, long-life engine oils for gas engines and compressors in a wide variety of applications.

• SENTRON LD 5000’s extended drain intervals can mean lower maintenance costs, less used oil to dispose of and a more efficient and profitable operation.

• Outstanding anti-wear protection prevents scoring of cylinder liners and piston ring wear, while reducing carbon build-up.

Product aPPLIcatIon

Sentron fleet 10W-40

• 0.54% wt ash.• Recommended for use in natural gas fuelled engines in oil and gas extraction

and agricultural irrigation that require high zinc for improved valve train wear.• Excellent anti-wear properties for engines with sliding cam followers.• Minimizes combustion chamber and spark plug deposits.• Not recommended for certain engines fitted with catalytic converters;

especially if catalyst is sensitive to elevated Zinc and Phosphorous versus conventional NGEO levels.

Sentron fleet 0W-30

• 0.54% wt ash.• All the features of SENTRON Fleet 10W-40 formulated for use in cold climates.• Ideal for extreme cold starts/cold flow pumpability (<-35˚C).• Not recommended for certain engines fitted with catalytic converters;

especially if catalyst is sensitive to elevated Zinc and Phosphorous versus conventional NGEO levels.

OTHER PRODUCTS FOR NATURAL GAS ENGINES

SENTRON 541C (0.04% wt ash)

• SENTRON 541C is recommended for larger 2-stroke cycle gas engines, with the added flexibility of use in certain 4-stroke cycle gas engines.

• Minimizes combustion chamber and spark plug deposits.



• SENTRON 840 is recommended for use in older Superior/White 4-stroke engines or 4-stroke engines with the need for medium ash content to help combat valve recession issues.

• Not recommended for engines fitted with catalytic converters.

YES NO

Do you operate in severe service conditions?(eg. Biogas, landfill gas, etc.)

Ashless(<0.1%wt)

Medium Ash(0.6% - 1% wt)

29

YES NO

SENTRON LD 5000 (0.57% wt ash)

• SENTRON LD 5000 provides excellent performance for up to 200% longer drain intervals and exceptional overall engine protection for maximum reliability and savings.*


• Petro-Canada recommends for use in Caterpillar, Waukesha, GE Jenbacher, MWM, MAN, MTU and Wartsila and other turbocharged or naturally aspirated, stoichiometric or lean burn engines that require low ash gas engine oil.


NO

Is the fuel pre-treated?

SENTRON CG40 (0.92% wt ash)

• SENTRON CG40 is designed for 4-stroke cycle gas engines running in severe service such as co-generation, sewage or sour gas or low halogen landfill gas operations.

• Suitable for use in engines fitted with catalytic converters.

• Not recommended for some engines fitted with catalytic converters, Especially if catalyst is sensitive to elevated Zinc and P vs conventional NGEO levels.

cOmprESSOr FLUIDS

COMPRO Synthetic• comPro Synthetic is specifically

designed for compressors operating at very high or lower temperatures or in severe service applications.

• formulated from a custom blend of polyalkylene glycol (PaG) and ester fluids, combined with an effective inhibitor package.

• available in a 32/46 grade.NOTE: This is a Polyalkylene Glycol / ester blend and should never be mixed with mineral oils or Poly Alpha Olefin synthetics.

YES – See page 36

Food Grade Required

Non Food Grade Required

PURITY FG Compressor Fluids

Type of Compressor Design:

Rotary Screw Reciprocating

150˚C/302˚F 50˚C/122˚F85˚C/185˚F 105˚C/221˚F

2,000 HR 8,000 HR 2,000 HR

COMPRO XL-S• comPro XL-S resists

oxidative breakdown better than some leading synthetic Pao based fluids.

• Provides up to 8,000 hours of continuous service in rotary screw compressors.

• available in grades 32, 46, 68, 100 and 150.

COMPRO• comPro provides

stronger resistance to oxidation breakdown than leading mineral oil based fluids.

• available in grades 32, 68, 100 and 150.

COMPRO XL-R• comPro XL-r is specifically

designed for lubrication and cooling of both single and multi-stage reciprocating air compressors.

• Particularly effective in systems operating at high discharge temperatures and at pressures as high as 6000 psi (413 bar).

• meets the industry standard (dIn 51506 VdL) for reciprocating compressor fluid.

• available in 68 grade.

AIR

R E C O M M E N D E D S E R V I C E H O U R S

WHat tYPe oF gaS IS beINg coMPreSSeD?

COMPRO XL-S COMPRO XL-R

500 HR

COMPRO COMPRO

COMPRO COMPRO Synthetic COMPRO XL-S COMPRO XL-S

M A X I M U M A I R D I S C H A R G E T E M P E R A T U R E

Centrifugal/ Lobe

8,000 HR 16,000 HR 24,000 HR

30

R E C O M M E N D E D S E R V I C E H O U R S

M A X I M U M A I R D I S C H A R G E T E M P E R A T U R E


• COMPRO™ Air Compressor Fluids provide long and highly reliable service life.

• COMPRESSOR OILS RP 268 and RP 460 provide excellent high temperature stability, good lubricity and wear protection.

• REFLO™ refrigeration compressor oils ensure optimum performance in commercial refrigeration compressor systems.

• SPX 5000, 7000 and 7100 Compressor Oils provide excellent lubricating and cooling for reciprocating and rotary screw compressors.

• NGS SYNTHETIC BLEND Compressor Fluids are unique formulations specially designed for flooded screw compressors handling the lightest hydrocarbon gases.

• Consult a Technical Services Advisor to confirm the correct lubricant application.

Moderate Pressure

High Pressure

CFC/HCFC (or ammonia

systems previously

operating on naphthenic

fluid)

HYDROCARBON GASES (NATURAL GAS) REFRIGERANT

Rotary Screw Compressors

Compression of “Sour”

Hydrocarbon Gases

Compression of “Sweet”

Hydrocarbon Gases and Propane in refrigeration

service

NGS SYNTHETIC BLEND COMPRESSOR FLUIDS• recommended for compression

of the lightest hydrocarbon gases (methane and ethane) where the expected dilution is <10% wt.

• a blended combination of hydrotreated (Ht) and polyalpha-olefin (Pao) base fluids, fortified with corrosion inhibitors, lubricity improvers and antifoam additives.

• available in a ISo 100 grade and ISo 150 grade.

COMPRESSOR OIL RP 268• recommended for use

in compressing sour, wet or contaminated gas.

• Provides excellent high-temperature stability.

• Very good lubricity and wear protection.

• minimizes deposit formation.

COMPRESSOR OIL RP 460• recommended for use in compressing

sour, wet or contaminated gas. • Suited for use in higher-pressure

applications.• Provides excellent high-temperature

stability.• Very good lubricity and wear protection.• minimizes deposit formation.

SPX 5000• recommended for

compression of sweet hydrocarbon gas mixtures including propane.

• a polyglycol synthetic lubricant resulting in a much lower gas solubility than standard mineral oils, which reduces viscosity dilution and greatly improves the separation of lubricant from the process gas.

SPX 7000 and 7100• recommended for compression of select

hydrocarbon mixtures, sour natural gas and acid gas, use in gas re-injection service.

• Polyglycol synthetic lubricants provide a much lower gas solubility than standard mineral oils, which reduces viscosity dilution and greatly improves the separation of lubricant from the process gas.

• available in an ISo 100 grade and ISo 150 grade.

REFLO CFC• a highly refined

naphthenic oil formulated for use in systems using chlorinated fluorocarbon (cfc) refrigerants such as freon, Genetron, and Isotron.

• can also be used in ammonia compressors.

REFLO 46A & REFLO 68A• Provides exceptional service in

ammonia refrigerant systems.• With proper change-out

procedures, may result in reduced oil carry over and lower fluid consumption.

• available in 2 Viscosity Grades, suitable for 46 and 68 Viscosity Grade applications.

REFLO Synthetic 68A• full synthetic Pao, specially formulated with seal

swell agent.• excellent performance at extreme low temperatures

such as in blast freezers that have very low evaporator temperatures (-49°c or above).

• Stability is improved over some competitive synthetic oils.

• Product is compatible with common elastomers, paints and plastics.

Force Feed Cylinder Lube Systems

(Not for crankcase)

Reciprocating Compressors

Compression of “Light

Sweet” and “Light Sour” Hydrocarbon

Gases

Ammonia R717

REFLO XL Synthetic Blend• delivers reliable, long-term performance in ammonia

refrigeration systems.• Strong thermal and oxidation stability delivers reduced

fluid breakdown, leading to longer fluid life for fewer change-outs and reduced costly downtime.

• delivers very strong low temperature fluidity and can be used in ammonia refrigeration systems where evaporator temperatures are greater than -40°c/-40°f.

• Specially formulated with seal swell agent for reduced seal shrinkage.

• Improved anti-wear capabilities for longer equipment life.

31

HEAT TrANSFEr FLUIDS

Food Grade Required No Food Grade Requirement

CALFLO HTF• CALFLO HTF is a high temperature heat transfer

fluid formulated to provide long service life.

• Its unique chemistry does not have the same objectionable odours, workplace health and safety, and environmental concerns of synthetic aromatic compounds.

• It is recommended for use in non-pressurized, liquid phase, closed heat transfer systems operating at bulk temperatures up to 326˚C/619˚F, with tubeskin temperatures as high as 343˚C/650˚F.

• Its low vapour pressure can minimize leakage from control valves and pipe flanges.

• Typical applications include:

– Chemical processing, power generation, die casting, resin manufacturing and metals plants.

CALFLO Synthetic• CALFLO Synthetic is a synthetic heat transfer

fluid that delivers outstanding protection at extreme low temperatures.

• The formulation is virtually free of impurities and aromatic compounds that can be hazardous to workplace health and safety.

• It is recommended for use in non-pressurized, liquid phase, closed heat transfer systems.

• CALFLO Synthetic’s breakthrough chemistry balances low temperature fluidity with outstanding oxidative stability and volatility control.

Low temperature down to -48˚C/-55˚F

oPeratINg teMPerature

PURITY FG Heat Transfer Fluid • PURITY FG Heat Transfer Fluid is

a food grade, HT-1 registered heat transfer fluid recommended for use in non-pressurized, liquid phase, closed heat transfer systems operating at bulk temperatures up to 326˚C/619˚F.

• High thermal and oxidative stability which can result in extended fluid life and lower operating costs.


– Central cooking facilities, drying, edible oil deodourizing and heating of deep frying oils, food product packaging manufacturing processes.

High Temperature up to 326˚C/619˚F

32

PerForMaNce beNeFItS• CALFLO™ HTF is a premium high temperature heat transfer fluid

recommended for systems operating with bulk temperatures up to 326˚C/619˚F.

• CALFLO AF is a highly efficient heat transfer fluid recommended for systems requiring a greater resistance to oxidation operating with bulk temperatures up to 316˚C/600˚F.

• CALFLO LT is a synthetic blend heat transfer fluid suitable over a wide temperature operating range from 5˚C/40˚F to 288˚C/550˚F. Excellent low temperature pumpability allows cold start-up in ambient temperatures as low as -40˚C/-40˚F.

• CALFLO Synthetic is a synthetic heat transfer fluid that balances low temperature fluidity with outstanding oxidative stability and volatility control at extreme low temperatures down to -48˚C/-55˚F.

• PURITY™ FG Heat Transfer Fluid is a food grade registered heat transfer fluid for the food processing industry with systems operating at bulk temperatures up to 326˚C/619˚F.

• PETRO-THERM™ is a heat transfer fluid developed for use in non-pressurized, liquid phase, closed heat transfer systems operating at bulk fluid temperatures up to 315˚C/599˚F.

• PETRO-THERM PPD is a heat transfer fluid developed for use in non-pressurized, liquid phase, closed heat transfer systems operating at bulk fluid temperatures up to 315˚C/599˚F. Excellent low temperature pumpability allows for initial start-ups in cold temperatures.

CALFLO AF• CALFLO AF is a highly efficient

heat transfer fluid formulated for systems where fluid resistance to oxidative breakdown is critical.

• It provides high thermal efficiency in systems operating up to 316˚C/600˚F.

• Its breakthrough chemistry demonstrates excellent oxidation stability.


– Plastic extrusion, plastic moulding, rubber manufacturing and metal die-casting operations.

CALFLO LT• CALFLO LT is a synthetic blend heat transfer

fluid recommended for non-pressurized, liquid phase, closed heat transfer systems that require high thermal efficiency over a wide temperature operating range, from 5˚C/40˚F to 288˚C/550˚F.

• Its low temperature fluidity ensures good start-up and pumpability under extreme conditions. CALFLO LT eliminates the need for expensive heat tracing and insulation in outdoor applications with ambient temperatures down to -40˚C/-40˚F.

• Typical applications include:– Exothermic or endothermic reactions in

chemical and pharmaceutical plants as well as refinery operations such as grease plants.

– Plastic moulding systems where the fluid is used both as a heating medium and a cooling medium.

PETRO-THERM/ PETRO-THERM PPD• PETRO-THERM is a heat

transfer fluid developed for use in non-pressurized, liquid phase, closed heat transfer systems operating at bulk fluid temperatures up to 315˚C/599˚F.

• Provides long, economical service in various industrial process applications.

• PETRO-THERM PPD is recommended for initial start-ups in cold temperatures down to -16˚C (3˚F) (based on a 2000 cSt maximum viscosity).

Resistance to Oxidative Breakdown is Critical

High Temperature up to 316˚C/600˚F

Economical service for mainstream industrial

systems in: forestry, asphalt, and marine applications

33

Wide Temperature operating range 5˚C/40˚F to 288˚C/550˚F and

start-up in ambient temperatures as low as -40˚C/-40˚F

mETAL wOrkING OILS

ALUCUT• ALUCUT oil is a light coloured,

low viscosity oil for machining aluminum and magnesium alloys.

• Contains lubricity and wetting agents that assist in producing excellent surface finishes and rapidly remove heat generated during high-speed machining.

SUPERCUT• SUPERCUT oils are designed

for use in various machining operations, such as tapping, threading, broaching and conventional turning.

• They have excellent lubricity and anti-weld properties and assist in extending tool life and producing a quality finish on machined parts.

TRANSICUT• TRANSICUT oils are non-stain,

transparent cutting oils intended for high-speed automatic screw machining and simple turning.

• Primarily recommended for low carbon steels, free machining steels and non-ferrous alloys.

• They have excellent lubricity and anti-weld properties and assist in extending tool life and producing a quality finish on machined parts.

Neat

Cutting Oils

Easier to Machine Metals (non-ferrous metals & low

carbon steel)

Aluminum & Magnesium Alloys

Tough to Machine Ferrous Metals

WHat aPPLIcatIoN IS tHIS MetaL WorkINg oIL beINg uSeD For?

34

CUTSOL HD• CUTSOL HD is intended for difficult

machining operations, where rapid heat removal is required.

• Contains extreme pressure additives for use in metal removing operations, where a high degree of surface finish and long tool life are desired.

• Provides good rust protection.

• When diluted in water it produces stable emulsions which have excellent cooling ability and the necessary balance of lubricity and extreme pressure characteristics required for proper machining conditions.

CUTSOL• CUTSOL is excellent for general

machining applications, including cutting, drilling, milling and grinding where a general-purpose coolant is required.

• CUTSOL is recommended for all machining operations, where cooling and rust protection are important.

• Contains a biocide and fungicide (antimicrobial agents).

• When diluted in water it produces stable emulsions which have excellent cooling ability and the necessary balance of lubricity and extreme pressure characteristics required for proper machining conditions.

• CUTSOL is chlorine free.

ALUDRAW 850 Wire Drawing Oil• ALUDRAW 850 is a shaping oil used in

processes such as drawing, forming, stamping, extrusion, forging and rolling.

• Extremely good life, with normal topping up as required.

• Most effective when it contains 1-2% of aluminum fines, which improves the drawing characteristics.

PerForMaNce beNeFItS• CUTSOL™ Soluble Cutting Oils are used where rapid heat

removal is a major requirement. When diluted in water they produce stable emulsions which have excellent cooling ability and the necessary balance of lubricity and extreme pressure characteristics required for proper machining conditions.

• TRANSICUT™ and SUPERCUT™ are Neat Cutting Oils designed for use as they are received and are non-miscible with water. They have excellent lubricity and anti-weld properties and assist in extending tool life and producing a quality finish on machined parts.

• ALUCUT™ is a Neat Cutting Oil specially developed for machining aluminum and magnesium alloys. It provides excellent surface finishes and rapidly removes heat generated during high-speed machining.

• ALUDRAW™ 850 Wire Drawing Oil is designed for drawing aluminum wire, providing good die life, material finish and dimensional accuracy.

Wire Drawing Oil

Soluble

Severe Machining

General Machining

35

YES

FOOD GrADE LUBrIcANTS

IN WHIcH aPPLIcatIoN Do You reQuIre a FooD graDe

LubrIcaNt?

HydraulicHeavy

Enclosed Gears

Chains & Conveyors

Do you need to have an antimicrobial preservative added to your lubricant?

YES NO YES NO

Do you need to have an antimicrobial preservative added to your lubricant?

PURITY FG AW Hydraulic Fluid with MICROLTM†

• Contains EPA Registered Antimicrobial Preservative to protect food grade lubricants from product degradation.

• Excellent resistance to breakdown from oxidation.

• Available in ISO VG 32, 46, 68, 100.

PURITY FG AW Hydraulic Fluid• Excellent resistance to

breakdown from oxidation.


PURITY FG EP Gear Fluid with MICROL†

• Contains EPA Registered Antimicrobial Preservative to protect food grade lubricants from product degradation.

• Excellent extreme pressure properties.

• Protects against damage due to wear, rust and corrosion.

• Available in ISO VG 100, 150, 220.

PURITY FG EP Gear Fluid• Excellent extreme

pressure properties.

• Protects against damage due to shock loading, long-term wear, build-up of sludge and varnish, rust and corrosion.

• Available in ISO VG 100, 150, 220, 320, 460.

PURITY FG Synthetic EP Gear Fluid• Exceptional extreme

pressure properties.

• Strong resistance to lubricant breakdown in harsh operating environments.

• Protects against damage due to long-term wear, build-up of sludge and varnish, rust and corrosion.

• Available in ISO VG 220.

PURITY FG Chain Fluid• Excellent tackiness,

resists water wash-off.

• Excellent extreme pressure properties.

• Provides protection against wear, rust and corrosion.

• Suitable for brush, drip or centralized applications.

• Available in light and heavy grade.

Is wide temperature performance required?

NO

Wide temperature (-35˚C/-31˚F to 121˚C/250˚F)

†MICROL is an antimicrobial product protection agent.

36


• Fits perfectly into HACCP and GMP plans. Carries a full set of food grade credentials including acceptability for use in food processing facilities in Canada and NSF H1 lubricants with incidental contact or HT1 heat transfer fluids with incidental contact registrations.

• Provides industrial strength lubricant protection in food processing operations throughout the plant, even in the most severe applications.

• Specially formulated to deliver long life and excellent wear protection in food processing applications for fewer production disruptions and higher productivity.

• See list of Food Industry Approvals/Credentials on page 40.

Compressors & Vacuum

Pumps

Hooks & Trolleys Seamer Fluid

Heat Transfer System

Release Agent & Wipe

Down Oil

PURITY FG Compressor Fluid• Outstanding oxidation

resistance.

• 4000 hour service in rotary screw compressors, and service per OEM guidelines in vane compressors.

• Provides protection against rust and corrosion.


PURITY FG Trolley Fluid• Outstanding resistance to

wear and corrosion and protects against oil drips.

• Excellent oxidation stability.

PURITY FG Seamer-E Fluid• Formulated for use in

high-speed continuous lubrication seaming units where contamination of the oil with water and sugar may occur.

• Designed to lubricate the main turrets, bearings, chains and gears for smooth and effective equipment performance.

PURITY FG Heat Transfer Fluid• Suitable for liquid

phase application up to 326˚C/619˚F.

• High thermal stability fluid formulated with specially selected additives to provide outstanding protection from oxidative breakdown.

• Suitable for food related operations such as the manufacturing of food product packaging materials.

PURITY FG WO White Mineral Oil• Ultra pure food grade

white mineral oil for food processing and agricultural industries.

• Available in the following grades: 10, 15, 35, 40, 68, 90.

• Odourless, tasteless and colourless.

PURITY FG Synthetic Fluids• Synthetic PAO

based product.

• Extends service life up to 4000 hrs. in rotary screw compressors at wide temperatures.

• Outstanding oxidation resistance.

• Controls sludge and varnish in pneumatic and hydraulic systems.

• Available in ISO VG 46, 100.

Is wide temperature performance required?

Wide temperature up to 4000 hrs

from -40˚C/-40˚F to 95˚C/203˚F

Moderate temperature up to 4000 hrs @ 85˚C/185˚F

YES NO

37


Do You reQuIre a FooD graDe greaSe or

SPraY LubrIcaNt?

GREASESPRAY LUBRICANT

38

PURITY FG2 with MICROL MAX Spray• Contains an Antimicrobial

Preservative to protect food grade lubricants from product degradation.

• Unique spray valve allows the product to be sprayed upside down to deliver lubricant protection in any direction.

• Suitable to lubricate a wide range of food processing applications including bearings, slides, guides and couplings.

PURITY FG Silicone Spray• Forms non-hardening

film to provide moisture resistance and help prevent corrosion around heavy water wash-up areas.

• Can be used in many metal to non-metal applications.


PURITY FG Penetrating Oil Spray• General purpose

penetrating oil that can be used to help loosen rust and scale around fasteners to ease the disassembly of equipment and fittings.

• Silicone free formula to allow for easy clean up on treated surfaces to be repainted.


PURITY FG Spray• Formulated with tackifiers

to stay in place and resist water wash-off.

• High load carrying and anti-wear properties.

• Convenient method to lubricate chains, rails and guides, small bearings, gears and other general lubrication.

PURITY FG2 Synthetic• Calcium Sulphonate/

Carbonate Complex

• Higher load carrying capability, excellent protection against wear.

• Strong resistance to lubricant breakdown and water washout.

• Effective across a wider range of temperature extremes.

Multi- application Spray

Extreme Temperature -40˚C/-40˚F to 200˚C/392˚F


• PURITY FG Grease resists water washout, water jet spray and most sterilizing chemicals used in cleaning better than its leading competitors.

• Products exhibit good low temperature pumpability.

• PURITY FG Greases have effective anti-wear and EP properties and protect against rust and corrosion.

• Specially formulated to deliver excellent performance and food grade purity under the highly demanding conditions of food processing operations.

• PURITY FG Clear and PURITY FG1 are recommended for the greasing systems in canning operations found in the beverage industry.

Low Operating Temperature and Central Lubrication Systems -35˚C/-31˚F to

120˚C/248˚F

YES NO

Do you need to have an antimicrobial preservative added to your grease?

39

PURITY FG2 Clear• Aluminum Complex

• Contaminants are more visible.

• Greater protection of gears and bearings.

• Effective protection against rust and corrosion.

PURITY FG2 with MICROL MAX• Contains an Antimicrobial

Preservative to protect food grade lubricants from product degradation.

• Very good resistance to water washout and water jet spray loss.

• Excellent anti-wear and EP properties.

• Very effective protection against rust and corrosion.

PURITY FG2• Aluminum Complex.

• Exceptional resistance to water washout and water jet spray loss.




• Exceptional resistance to water washout and water jet spray loss.






• Excellent choice for leaky, enclosed gear cases and auto lube systems.

PURITY FG2 Extreme• High viscosity, Semi

Synthetic, Aluminum Complex.

• Greater protection of gears, bearings and equipment when operating from low to medium speed with heavy loads.

• Effective protection in applications subjected to high temperature, high pressure, and heavy loads (such as in Pellet Mills).

Central Lubrication or Lower operating temperature

-25˚C/-13˚F to 160˚C/320˚F

YES NO

Do you require a clear grease?

Normal Operating Temperature -20˚C/-4˚F to 160˚C/320˚F

YES NO

Does your equipment operate with low speed,

heavy loads?

40

For a complete list of PURITY FG approvals, consult a Petro-Canada Technical Service Representative.

NSF classificationsH1 Lubricants with incidental contact

3H release agents

Ht1 Heat transfer fluids with incidental contact


Food Industry Approvals/Credentials

Product Name

NSF registrations acceptable for use in food processing facilities in canada

kosher and Pareve by Star k IFaNca

H1 3H HT1 Approved for the preparation of Kosher Foods

Kosher and

Pareve

Kosher for Passover

Halal

PURITYTM FG AW Hydraulic Fluid with MICROL†

X X X X

PURITY FG AW Hydraulic Fluid X X X X

PURITY FG EP Gear Fluid with MICROL† X X X X

PURITY FG EP Gear Fluid X X X X

PURITY FG Synthetic EP Gear Fluid X X X X

PURITY FG Chain Fluid X X X X X

PURITY FG Compressor Fluid X pending X X

PURITY FG Synthetic Fluid X X X X

PURITY FG Seamer-E Fluid X X X X

PURITY FG Spray X X X X X

PURITY FG Penetrating Oil Spray X X pending pending

PURITY FG Silicone Spray X X pending pending

PURITY FG2 with MICROL† MAX Spray X pending pending pending

PURITY FG Trolley Fluid X X X X X

PURITY FG Heat Transfer Fluid X X*** X X X

PURITY FG WO White Oil X X X** X X* X

PURITY FG2 Grease X X X X



PURITY FG2 with MICROL† MAX Grease X pending X X

PURITY FG2 Synthetic Grease X X X X

PURITY FG2 Extreme Grease X X X X

PURITY FG2 CLEAR Grease X X X X

NOTES: Where indicated, Purity FG lubricants are approved for use only as Lubricants with Incidental Food Contact as per 21CFR 178.3570. They are not food additives and are not to be added to food products.

* PURITY FG White Oil 10, 40 & 68 grades pending approval.

** PURITY FG White Oil 10 & 40 grades are pending listing as release agents and lubricants for incidental contact.

***PURITY FG Heat Transfer Fluid is listed as a Heat Exchanger Agent.

† MICROL is an antimicrobial product protection agent.

41

ELEcTrIcAL INSULATING FLUIDS

lUMINOlAPPlICATION PRODUCT PERFORMANCE FEATURES CREDENTIAlS

Designed for type I LUMINOL TR • Negative gassing tendency.

• Ultra-pure, inherently biodegradable in natural environments.

• Free of carcinogenic polynuclear aromatics (PNAs).

• Virtually non-toxic and colourless.

• Fully compatible with existing mineral oils.

• Extended service life helps reduce labour costs.

• Meets or exceeds the performance requirements of IEC 60296 General specifications for trace inhibited transformer oil.

• CSA C50 Class A&B.

• Meets the CSA C50 upgraded oxidation stability Special Requirements for Type III fluids.

• ASTM D3487.

• DOBLE TOPS.

• Rated non-corrosive as tested by ASTM D1275 B and IEC 62535.

Designed for type II LUMINOL TRi • Negative gassing tendency.

• Ultra-pure, inherently biodegradable in natural environments.

• Free of carcinogenic polynuclear aromatics (PNAs).

• Virtually non-toxic and colourless.

• Fully compatible with existing mineral oils.

• Extended service life helps reduce labour costs.

• Meets or exceeds the performance requirements of IEC 60296 General specifications for inhibited transformer oil.

• CSA C50 Class A&B.

• Meets the CSA C50 upgraded oxidation stability Special Requirements for Type IV fluids.

• ASTM D3487.

• DOBLE TOPS.

• Rated non-corrosive as tested by ASTM D1275 B and IEC 62535.


• LUMINOL™ severely hydrotreated isoparaffin fluids are designed to withstand the harsh conditions endured by transformers better than conventional naphthenic oils.

• Excellent heat transfer performance.

• Virtually sulphur-free, with no corrosive sulphur which can be harmful to transformer and load tap changer components.

• Low power factor (dielectric loss) to reduce thermal runaway.

• Ultra-pure, inherently biodegradable in natural environments, virtually free of carcinogenic polynuclear aromatics (PNAs) and virtually non-toxic.

wAY LUBrIcANTS & mIScELLANEOUS FLUIDS

Machine Tool and Way lubricantsAPPlICATION PRODUCT PERFORMANCE FEATURES CREDENTIAlS

Slideways of machine tools ACCUFLO™ TK 68 • Enables smooth motion, reduces friction.

• Improves workpiece finish and accuracy through reduced stick-slip chatter.

• Outstanding tackiness reduces wash-off by coolants and promotes excellent adhesion to metal surface.

• Recommended for horizontal slides and moderately loaded machine tools.

• Passes Bijur’s filtration test #2107.

• GM LS2.

• MAG IAS (formerly Cincinnati) P-47.

vertical slides or heavy duty machine tools such as planers and boring mills

ACCUFLO TK 220 • Enables smooth motion, reduces friction.

• Improves workpiece finish and accuracy through reduced stick-slip chatter.

• Outstanding tackiness reduces wash-off by coolants and promotes excellent adhesion to metal surface.

• Recommended for vertical slides and heavy duty machine tools.

• GM LS2.


commercial printing presses and other industrial applications

ACCUFLO SS 68 • Provides outstanding lubrication.

• Excellent shear stability.

• Excellent adhesive properties.

• Protects against rust and corrosion.

• MAG IAS (formerly Cincinnati) P-47

• Meets specification standard CLP DIN 51517-3:2004-01 ISO VG 68 MAN Roland (Illustration Machines, Geoman and Colorman models).

• Meets requirements of Goss Graphic Systems Service Bulletin SBM 5078 “Lubricating Oil Guidelines.”

Slideways of machine tools PC Waylube 68 • Reduces stick-slip chatter.

• Reduces wear caused by metal-to-metal contact.

• GM LS2.

• Passes Bijur’s filtration test #2107.


Rock Drill lubricantsAPPlICATION PRODUCT VISCOSITY GRADES PERFORMANCE FEATURES

air-operated rock Drills ARDEE™ Rock Drill Oils

• 32

• 46

• 68

• 100

• 150

• 220

• Ideal for use in equipment running at high air flow rates and high piston temperatures.

• Designed for low and high temperature conditions.

• Meet or surpass major equipment manufacturers’ specifications.

• 32 is used for winter conditions.

• ARDEE 32 is recommended for use in plant air-line lubricators, especially where the air is water laden.

• 46 is an all-season solution for the drilling industry designed to consolidate inventory and provide protection year round.

• 68, 100 and 150 are used in underground mining operations to reduce oil consumption and misting.

• 150 is recommended for SECAN drills and in mining operations trying to reduce oil consumption and misting.

• 220 is used in summer in large bore drills (greater than 10 cm/ 4 inch) in surface mines.

42

Machine Tool and Way lubricantsConcrete Form Oil

APPlICATION PRODUCT GRADES PERFORMANCE FEATURESrelease agents on forms involved in concrete pouring operations

CON-REL-EZE™ Concrete Form Oils

• 40

• 60

• CON-REL-EZE 40 and 60 are light viscosity oils designed for spraying forms; may also be used as rust preventatives for machinery and as a penetrating oil on nuts and bolts.


• From industrial applications to printing presses to rock drills, Petro-Canada provides a complete line of lubrication solutions for all your applications.

System and Equipment CleaningAPPlICATION PRODUCT PERFORMANCE FEATURES

Flushing agent for heat transfer systems

Flushing Fluid • Used to help flush residual fluid from a heat transfer system prior to system recharging.

• Helps displace other loose system contaminants.

Heat transfer Systems Cleaning Fluid • Helps clean dirty heat transfer systems including heavily carbonized systems.

• Helps contribute to better thermal efficiency of the heat transfer system.

compressor Fluids Compressor Cleaner • Dissolves varnish and solubilizing sludge from compressors during operation.

• May be used as a short-term compressor lubricant (up to 400 hours).

• Fully compatible with mineral oils and most synthetics.

MiscellaneousAPPlICATION PRODUCT PERFORMANCE FEATURES/CREDENTIAlS

vacuum pump fluids Super Vac • NSF H2 registered.

• Delivers extended lubricant life under conditions of high pump load and elevated operating temperatures.

• Synthetic-like resistance to high temperature fluid breakdown.

• Ashless formulation.

• Available in the following vacuum pump grades: 15, 19, 20.

continuous rotary cookers and sterilizers

Rotary Cooker Fluid • Provides outstanding lubrication under high temperature and high humidity conditions.

• NSF H2 registered.

43

True performance is working consistently at higher levels than your competitors.

Petro-Canada lubricant products are designed to outperform competitive lubricants in a wide range of demanding applications.

Our remarkable lubricants, specialty fluids and greases have a growing reputation for maximizing equipment performance, customer savings and customer productivity. That translates into Tangible Savings Solutions we can confidently make to our customers.

How is this achieved?

By using Petro-Canada’s series of Value models for comparing current lubricant choices with our lubricant products. The differences may surprise you.

We start by getting to know the specifics of your business and the nature and extent of your lubrication needs. We work with you to develop a detailed written plan to produce meaningful, sustainable cost savings.

Next, we propose the most cost effective lubricant for each application without compromising the protection and performance of your equipment, or the manufacturer’s warranty. We focus on the opportunity of using the same lubricant for multiple applications to simplify product ordering, inventory and applications to reduce your overall lubrication costs. We can also provide you with lubrication surveys, leakage control studies, flow rate studies, and other specialized services to help you get the most out of your lubrication dollars.

We also track progress, recommend course corrections, if necessary, and back this up with the best “No-Nonsense Warranty” in the business to help put your mind at ease. And we also provide top notch training for your maintenance professionals to help them select the right lubricant, in the right equipment, in the right quantity, at the right time. All these services are documented to help you track and evaluate the impact of our service support.

That’s how we provide Tangible Savings Solutions for you!

And that’s how we save you money.

Petro-Canada’s Tangible Savings Solutions

44

Midwest Motor Express realized $83,900 per year in savings since the switch to DURONTM-E”Midwest Motor Express frank dietz, Maintenance Shop Manager

“

LUBrIcANTS prODUcT pArT NUmBErS

for your reference and future use, we are listing our current product part numbers. each unique number is designed to include the product name, the grade and the package size. the product names and grades will become obvious to you as you become familiar with them. the package codes will also become familiar to you.

Packaging availability is subject to change. Please contact a Petro-canada Lubricants representative for personal assistance in selecting the right product choice.

HEAVY DUTY ENGINE OIlS PAGE 4-5

NAME PArT NuMbErS

DURON-E SYNTHETIC 0W-40 ENGINE OIl DESYN04 duron-e SYntHetIc 0W-40 enGIne oIL BuLK deSYn04BLKduron-e SYntHetIc 0W-40 enGIne oIL 4X4L caSe deSYn04c16duron-e SYntHetIc 0W-40 enGIne oIL 1040L IBc deSYn04IBcduron-e SYntHetIc 0W-40 enGIne oIL 205L drum* deSYn04drmduron-e SYntHetIc 0W-40 enGIne oIL 20L PaIL deSYn04P20

DURON-E SYNTHETIC 5W-40 ENGINE OIl DESYN54duron-e SYntHetIc 5W-40 enGIne oIL BuLK deSYn54BLKduron-e SYntHetIc 5W-40 enGIne oIL 12X1L caSe deSYn54c12duron-e SYntHetIc 5W-40 enGIne oIL 4X4L caSe deSYn54c16duron-e SYntHetIc 5W-40 enGIne oIL 1040L IBc deSYn54IBcduron-e SYntHetIc 5W-40 enGIne oIL 205L drum deSYn54drmduron-e SYntHetIc 5W-40 enGIne oIL 20L PaIL deSYn54P20

DURON-E SYNTHETIC 10W-40 ENGINE OIl DESYN14duron-e SYntHetIc 10W-40 enGIne oIL BuLK deSYn14BLKduron-e SYntHetIc 10W-40 enGIne oIL 12X1L caSe deSYn14c12 duron-e SYntHetIc 10W-40 enGIne oIL 4X4L caSe deSYn14c16duron-e SYntHetIc 10W-40 enGIne oIL 1040L IBc deSYn14IBcduron-e SYntHetIc 10W-40 enGIne oIL 208L drum deSYn14drrduron-e SYntHetIc 10W-40 enGIne oIL 205L drum* deSYn14drmduron-e SYntHetIc 10W-40 enGIne oIL 20L PaIL deSYn14P20

DURON-E Xl SYNTHETIC BlEND 15W-40 ENGINE OIl DEXl15duron-e XL SYntHetIc BLend 15W-40 enG. oIL BuLK deXL15BLKduron-e XL SYntHetIc BLend 15W-40 enG. oIL 12X1L caSe deXL15c12 duron-e XL SYntHetIc BLend 15W-40 enG. oIL 4X4L caSe deXL15c16duron-e XL SYntHetIc BLend 15W-40 enG. oIL 1040L IBc deXL15IBcduron-e XL SYntHetIc BLend 15W-40 enG. oIL 205L drum* deXL15drmduron-e XL SYntHetIc BLend 15W-40 enG. 20L oIL PaIL deXL15P20

DURON-E 10W-30 ENGINE OIl DE13duron-e 10W-30 enGIne oIL BuLK de13BLKduron-e 10W-30 enGIne oIL 12X1L caSe de13c12duron-e 10W-30 enGIne oIL 4X4L caSe de13c16duron-e 10W-30 enGIne oIL 1040L IBc de13IBcduron-e 10W-30 enGIne oIL 205L drum** de13drmduron-e 10W-30 enGIne oIL 20L PaIL de13P20

DURON-E 15W-40 ENGINE OIl DE15duron-e 15W-40 enGIne oIL BuLK de15BLKduron-e 15W-40 enGIne oIL 2X10L caSe de15c02duron-e 15W-40 enGIne oIL 12X1L caSe de15c12 duron-e 15W-40 enGIne oIL 4X4L caSe de15c16duron-e 15W-40 enGIne oIL 208L drum de15drrduron-e 15W-40 enGIne oIL 205L drum* de15drmduron-e 15W-40 enGIne oIL 20L PaIL de15P20

DURON SYNTHETIC 5W-40 ENGINE OIl DUSYN54duron SYntHetIc 5W-40 enGIne oIL BuLK duSYn54BLKduron SYntHetIc 5W-40 enGIne oIL 12X1L caSe duSYn54c12duron SYntHetIc 5W-40 enGIne oIL 4X4L caSe duSYn54c16duron SYntHetIc 5W-40 enGIne oIL 1040L IBc duSYn54IBcduron SYntHetIc 5W-40 enGIne oIL 205L drum* duSYn54drmduron SYntHetIc 5W-40 enGIne oIL 20L PaIL duSYn54P20

DURON SYNTHETIC 0W-30 ENGINE OIl DUSYN03duron SYntHetIc 0W-30 enGIne oIL BuLK duSYn03BLKduron SYntHetIc 0W-30 enGIne oIL 12X1 caSe duSYn03c12duron SYntHetIc 0W-30 enGIne oIL 4X4L caSe duSYn03c16duron SYntHetIc 0W-30 enGIne oIL 205L drum* duSYn03drmduron SYntHetIc 0W-30 enGIne oIL 20L PaIL duSYn03P20

DURON Xl 0W-30 ENGINE OIl DXl03duron XL 0W-30 enGIne oIL BuLK dXL03BLKduron XL 0W-30 enGIne oIL 12X1L caSe dXL03c12duron XL 0W-30 enGIne oIL 4X4L caSe dXL03c16duron XL 0W-30 enGIne oIL 1040L IBc dXL03IBc

duron XL 0W-30 enGIne oIL 205L drum* dXL03drmduron XL 0W-30 enGIne oIL 20L PaIL dXL03P20

DURON Xl 10W-40 ENGINE OIl DXl14duron XL 10W-40 enGIne oIL BuLK dXL14BLKduron XL 10W-40 enGIne oIL 4X4L caSe dXL14c16duron XL 10W-40 enGIne oIL 205L drum* dXL14drmduron XL 10W-40 enGIne oIL 20L PaIL dXL14P20

DURON Xl SYNTHETIC BlEND 15W-40 ENGINE OIl DXl15duron XL 15W-40 enGIne oIL BuLK dXL15BLKduron XL 15W-40 enGIne oIL 12X1L caSe dXL15c12duron XL 15W-40 enGIne oIL 4X4L caSe dXL15c16duron XL 15W-40 enGIne oIL 1040L IBc dXL15IBcduron XL 15W-40 enGIne oIL 205L drum* dXL15drmduron XL 15W-40 enGIne oIL 20L PaIL dXL15P20

DURON 10W ENGINE OIl DUR1duron 10W enGIne oIL BuLK dur1BLKduron 10W enGIne oIL 12X1L caSe dur1c12duron 10W enGIne oIL 4X4L caSe dur1c16duron 10W enGIne oIL 1040L IBc dur1IBcduron 10W enGIne oIL 205L drum** dur1drmduron 10W enGIne oIL 20L PaIL dur1P20

DURON 20 ENGINE OIl DUR2duron 20 enGIne oIL 205L drum dur2drmduron 20 enGIne oIL 20L PaIL dur2P20

DURON 30 ENGINE OIl DUR3duron 30 enGIne oIL BuLK dur3BLKduron 30 enGIne oIL 12X1L caSe dur3c12duron 30 enGIne oIL 4X4L caSe dur3c16duron 30 enGIne oIL 205L drum** dur3drmduron 30 enGIne oIL 20L PaIL dur3P20

DURON 40 ENGINE OIl DUR4duron 40 enGIne oIL BuLK dur4BLKduron 40 enGIne oIL 12X1L caSe dur4c12duron 40 enGIne oIL 4X4L caSe dur4c16duron 40 enGIne oIL 1040L IBc dur4IBcduron 40 enGIne oIL 205L drum** dur4drmduron 40 enGIne oIL 20L PaIL dur4P20

DURON 50 ENGINE OIl DUR5duron 50 enGIne oIL 205L drum* dur5drmduron 50 enGIne oIL 20L PaIL dur5P20

DURON 15W-40 ENGINE OIl DUR15 duron 15W-40 enGIne oIL 2X10L caSe dur15c02 duron 15W-40 enGIne oIL 12X1L caSe dur15c12 duron 15W-40 enGIne oIL 4X4L caSe dur15c16 duron 15W-40 enGIne oIL 1040L IBc dur15IBc duron 15W-40 enGIne oIL 205L drum dur15drX duron 15W-40 enGIne oIL 20L PaIL dur15P20

DIESElTONIC 40 MOTOR OIl DTON4dIeSeLtonIc 40 motor oIL BuLK dton4BLKdIeSeLtonIc 40 motor oIL 4X4L caSe dton4c16dIeSeLtonIc 40 motor oIL 205L drum* dton4drmdIeSeLtonIc 40 motor oIL 20L PaIL dton4P20

RAlUBE 940 CF Rl94CFraLuBe 940 cf BuLK rL94cfBLKraLuBe 940 cf drum rL94cfdrm

RAlUBE 40 CFS Rl40CFSraLuBe 40 cfS BuLK rL40cfSBLKraLuBe 40 cfS 205 L drum* rL40cfSdrm* also available in decant drums ** also available in drum decant and export drums

AUTOMOTIVE GEAR OIlS PAGE 6-7NAME PArT NuMbErS

TRAXON 85W-140 TR8514traXon 85W-140 BuLK tr8514BLKtraXon 85W-140 1040L IBc tr8514IBctraXon 85W-140 205L drum* tr8514drmtraXon 85W-140 60L KeG tr8514K60traXon 85W-140 20L PaIL tr8514P20

TRAXON 80W-90 TR89traXon 80W-90 BuLK tr89BLKtraXon 80W-90 4X4L caSe tr89c16traXon 80W-90 205L drum** tr89drmtraXon 80W-90 60L KeG tr89K60traXon 80W-90 20L PaIL tr89P20traXon 80W-90 IBc tr89IBc

TRAXON E SYNTHETIC CD-50 TRE5traXon e SYntHetIc cd-50 205L drum* tre5drmtraXon e SYntHetIc cd-50 60L KeG tre5K60traXon e SYntHetIc cd-50 20L PaIL tre5P20

TRAXON E SYNTHETIC 75W-90 TRE759traXon e SYntHetIc 75W-90 4X4L caSe tre759c16traXon e SYntHetIc 75W-90 205L drum* tre759drmtraXon e SYntHetIc 75W-90 60L KeG tre759K60traXon e SYntHetIc 75W-90 20L PaIL tre759P20

TRAXON E SYNTHETIC 80W-140 TRE814traXon e SYntHetIc 80W-140 BuLK tre814BLKtraXon e SYntHetIc 80W-140 1040L IBc tre814IBctraXon e SYntHetIc 80W-140 205L drum** tre814drmtraXon e SYntHetIc 80W-140 60L KeG tre814K60traXon e SYntHetIc 80W-140 20L PaIL tre814P20

TRAXON SYNTHETIC 75W-90 TRSY759traXon SYntHetIc 75W-90 BuLK trSY759BLKtraXon SYntHetIc 75W-90 205L drum* trSY759drmtraXon SYntHetIc 75W-90 20L PaIL trSY759P20

TRAXON Xl SYNTHETIC BlEND 75W-90 TRXl759traXon XL SYntHetIc BLend 75W-90 BuLK trXL759BLKtraXon XL SYntHetIc BLend 75W-90 4X4L caSe trXL759c16traXon XL SYntHetIc BLend 75W-90 205L drum** trXL759drmtraXon XL SYntHetIc BLend 75W-90 60L KeG trXL759K60traXon XL SYntHetIc BLend 75W-90 20L PaIL trXL759P20 traXon XL SYntHetIc BLend 75W-90 1040L IBc trXL759IBc

TRAXON Xl SYNTHETIC BlEND 80W-140 TRXl814traXon XL SYntHetIc BLend 80W-140 BuLK trXL814BLKtraXon XL SYntHetIc BLend 80W-140 drum* trXL814drm* also available in decant drums ** also available in drum decant and export drums

COMMERCIAl TRANSPORTATION HYDRAUlIC FlUIDS PAGE 8-9

NAME PArT NuMbErS

HYDREX AW 22 HYDRAUlIC OIl HDXAW22HYdreX aW 22 HYdrauLIc oIL 205L drum* HdXaW22drmHYdreX aW 22 HYdrauLIc oIL 20L PaIL HdXaW22P20 HYdreX aW 22 HYdrauLIc oIL BuLK HdXaW22BLK

HYDREX AW 32 HYDRAUlIC OIl HDXAW32HYdreX aW 32 HYdrauLIc oIL BuLK HdXaW32BLKHYdreX aW 32 HYdrauLIc oIL 1040L IBc HdXaW32IBcHYdreX aW 32 HYdrauLIc oIL 205L drum** HdXaW32drmHYdreX aW 32 HYdrauLIc oIL 20L PaIL HdXaW32P20

HYDREX AW 46 HYDRAUlIC OIl HDXAW46HYdreX aW 46 HYdrauLIc oIL BuLK HdXaW46BLKHYdreX aW 46 HYdrauLIc oIL 1040L IBc HdXaW46IBc

45

HYdreX aW 46 HYdrauLIc oIL 1100L cuBe HdXaW46cuSHYdreX aW 46 HYdrauLIc oIL 205L drum* HdXaW46drmHYdreX aW 46 HYdrauLIc oIL 20L PaIL HdXaW46P20

HYDREX AW 68 HYDRAUlIC OIl HDXAW68HYdreX aW 68 HYdrauLIc oIL BuLK HdXaW68BLKHYdreX aW 68 HYdrauLIc oIL 1040L IBc HdXaW68IBc HYdreX aW 68 HYdrauLIc oIL 205L drum** HdXaW68drm HYdreX aW 68 HYdrauLIc oIL 20L PaIL HdXaW68P20

HYDREX AW 80 HYDRAUlIC OIl HDXAW80HYdreX aW 80 HYdrauLIc oIL BuLK HdXaW80BLK

HYDREX AW 100 HYDRAUlIC OIl HDXAW10HYdreX aW 100 HYdrauLIc oIL BuLK HdXaW10BLKHYdreX aW 100 HYdrauLIc oIL 205L drum** HdXaW10drmHYdreX aW 100 HYdrauLIc oIL 20L PaIL HdXaW10P20

HYDREX MV 22 HYDRAUlIC OIl HDXMV22HYdreX mV 22 HYdrauLIc oIL BuLK HdXmV22BLKHYdreX mV 22 HYdrauLIc oIL 1040L IBc HdXmV22IBcHYdreX mV 22 HYdrauLIc oIL 205L drum** HdXmV22drmHYdreX mV 22 HYdrauLIc oIL 20L PaIL HdXmV22P20

HYDREX MV 36 HYDRAUlIC OIl HDXMV36HYdreX mV 36 HYdrauLIc oIL BuLK HdXmV36BLKHYdreX mV 36 HYdrauLIc oIL 1040L IBc HdXmV36IBcHYdreX mV 36 HYdrauLIc oIL 205L drum** HdXmV36drmHYdreX mV 36 HYdrauLIc oIL 20L PaIL HdXmV36P20

HYDREX MV 60 HYDRAUlIC OIl HDXMV60HYdreX mV 60 HYdrauLIc oIL BuLK HdXmV60BLKHYdreX mV 60 HYdrauLIc oIL 205L drum** HdXmV60drmHYdreX mV 60 HYdrauLIc oIL 20L PaIL HdXmV60P20

HYDREX XV All SEASON HYDRAUlIC OIl HDXASHYdreX XV aLL SeaSon HYdrauLIc oIL BuLK HdXaSBLKHYdreX XV aLL SeaSon HYdrauLIc oIL 4X4L JuG HdXaSc16HYdreX XV aLL SeaSon HYdrauLIc oIL 1040L IBc HdXaSIBc HYdreX XV aLL SeaSon HYdrauLIc oIL 205L drum* HdXaSdrmHYdreX XV aLL SeaSon HYdrauLIc oIL 20L PaIL HdXaSP20

ENVIRON AW 32 HYDRAUlIC OIl ENVAW32enVIron aW 32 BuLK enVaW32BLKenVIron aW 32 205L drum* enVaW32drmenVIron aW 32 HYdrauLIc oIL 20L PaIL enVaW32P20

ENVIRON AW 46 HYDRAUlIC OIl ENVAW46 enVIron aW 46 20L PaIL enVaW46P20enVIron aW 46 BuLK enVaW46BLKenVIron aW 46 205L drum* enVaW46drm

ENVIRON AW 68 HYDRAUlIC OIl ENVAW68enVIron aW 68 BuLK enVaW68BLKenVIron aW 68 205L drum* enVaW68drm

ENVIRON MV 32 HYDRAUlIC OIl ENVMV32enVIron mV 32 BuLK enVmV32BLKenVIron mV 32 205L drum* enVmV32drmenVIron mV 32 20L PaIL enVmV32P20

ENVIRON MV 46 HYDRAUlIC OIl ENVMV46enVIron mV 46 HYdrauLIc oIL 1040L IBc enVmV46IBcenVIron mV 46 205L drum* enVmV46drmenVIron mV 46 20L PaIL enVmV46P20

HYDREX MV ARCTIC 15 HYDRAUlIC OIl HDXAR15HYdreX mV arctIc 15 HYdrauLIc oIL BuLK HdXar15BLKHYdreX mV arctIc 15 HYdrauLIc oIL 205L drum* HdXar15drmHYdreX mV arctIc 15 HYdrauLIc oIL 20L PaIL HdXar15P20

HYDREX EXTREME HYDRAUlIC OIl HDXEXTHYdreX eXtreme 1040L IBc HdXeXtIBcHYdreX eXtreme 205L drum* HdXeXtdrmHYdreX eXtreme 20L PaIL HdXeXtP20* also available in decant drums ** also available in drum decant and export drums

PASSENGER CAR MOTOR OIlS PAGE 10NAME PArT NuMbErS

PETRO-CANADA SUPREME SYNTHETIC 0W-20 MOTOR OIl MOSYN02Petro-canada SuPreme SYntHetIc 0W-20 BuLK moSYn02BLKPetro-canada SuPreme SYntHetIc 0W-20 12X1L caSe moSYn02c12Petro-canada SuPreme SYntHetIc 0W-20 1040L IBc moSYn02IBcPetro-canada SuPreme SYntHetIc 0W-20 205L drum* moSYn02drm

PETRO-CANADA SUPREME SYNTHETIC 0W-30 MOTOR OIl MOSYN03Petro-canada SuPreme SYntHetIc 0W-30 12X1L caSe moSYn03c12Petro-canada SuPreme SYntHetIc 0W-30 BuLK moSYn03BLKPetro-canada SuPreme SYntHetIc 0W-30 205L drum* moSYn03drm

PETRO-CANADA SUPREME SYNTHETIC 5W-20 MOTOR OIl MOSYN52Petro-canada SuPreme SYntHetIc 5W-20 BuLK moSYn52BLKPetro-canada SuPreme SYntHetIc 5W-20 12X1L caSe moSYn52c12Petro-canada SuPreme SYntHetIc 5W-20 4X4L caSe moSYn52c16Petro-canada SuPreme SYntHetIc 5W-20 205L drum* moSYn52drm

PETRO-CANADA SUPREME SYNTHETIC 5W-30 MOTOR OIl MOSYN53Petro-canada SuPreme SYntHetIc 5W-30 BuLK moSYn53BLKPetro-canada SuPreme SYntHetIc 5W-30 12X1L caSe moSYn53c12

Petro-canada SuPreme SYntHetIc 5W-30 4X4L caSe moSYn53c16Petro-canada SuPreme SYntHetIc 5W-30 205L drum* moSYn53drm

PETRO-CANADA SUPREME SYNTHETIC 10W-30 MOTOR OIl MOSYN13Petro-canada SuPreme SYntHetIc 10W-30 BuLK moSYn13BLKPetro-canada SuPreme SYntHetIc 10W-30 12X1L caSe moSYn13c12Petro-canada SuPreme SYntHetIc 10W-30 205L drum moSYn13drm

PETRO-CANADA SUPREME 5W-20 MOTOR OIl MOSP52Petro-canada SuPreme 5W-20 BuLK moSP52BLKPetro-canada SuPreme 5W-20 12X1L caSe moSP52c12Petro-canada SuPreme 5W-20 1040L IBc moSP52IBc Petro-canada SuPreme 5W-20 208L drum moSP52drrPetro-canada SuPreme 5W-20 205L drum* moSP52drm

PETRO-CANADA SUPREME 5W-30 MOTOR OIl MOSP53Petro-canada SuPreme 5W-30 BuLK moSP53BLKPetro-canada SuPreme 5W-30 12X1L caSe moSP53c12Petro-canada SuPreme 5W-30 1040L IBc moSP53IBcPetro-canada SuPreme 5W-30 4X4L caSe moSP53c16Petro-canada SuPreme 5W-30 208L drum moSP53drrPetro-canada SuPreme 5W-30 205L drum** moSP53drm

PETRO-CANADA SUPREME 10W-30 MOTOR OIl MOSP13Petro-canada SuPreme 10W-30 BuLK moSP13BLKPetro-canada SuPreme 10W-30 12X1L caSe moSP13c12Petro-canada SuPreme 10W-30 1040L IBc moSP13IBcPetro-canada SuPreme 10W-30 4X4L caSe moSP13c16Petro-canada SuPreme 10W-30 208L drum moSP13drrPetro-canada SuPreme 10W-30 205L drum** moSP13drm

PETRO-CANADA SUPREME 10W-40 MOTOR OIl MOSP14Petro-canada SuPreme 10W-40 BuLK moSP14BLKPetro-canada SuPreme 10W-40 12X1L caSe moSP14c12Petro-canada SuPreme 10W-40 4X4L caSe moSP14c16Petro-canada SuPreme 10W-40 205L drum moSP14drm

PETRO-CANADA SUPREME 20W-50 MOTOR OIl MOSP25Petro-canada SuPreme 20W-50 12X1L caSe moSP25c12Petro-canada SuPreme 2oW-50 4X4L caSe moSP25c16Petro-canada SuPreme 20W-50 205L drum* moSP25drm* also available in decant drums

AUTOMATIC TRANSMISSION FlUIDS PAGE 11NAME PArT NuMbErS

DEXRON VI DEX6deXron VI atf BuLK deX6BLKdeXron VI atf 12X1L caSe deX6c12deXron VI atf 4X4L caSe deX6c16deXron VI atf 205L drum deX6drmdeXron VI atf 1040L IBc deX6IBc

ATF+4 CHRYATF4 atf+4 fLuId 1040L IBc cHrYatf4IBcatf+4 fLuId BuLK cHrYatf4BLKatf+4 fLuId 205L drum cHrYatf4drm

DURADRIVE MV SYNTHETIC ATF DDMVATF duradrIVe mV SYntHetIc atf BuLK ddmVatfBLKduradrIVe mV SYntHetIc atf 12X1L caSe ddmVatfc12duradrIVe mV SYntHetIc atf 20L PaIL ddmVatfP20duradrIVe mV SYntHetIc atf 208L drum ddmVatfdrrduradrIVe mV SYntHetIc atf 205L drum* ddmVatfdrmduradrIVe mV SYntHetIc atf 1040L IBc ddmVatfIBc

ATF D3M ATFD3Matf d3m BuLK atfd3mBLKatf d3m 12X1L caSe atfd3mc12atf d3m 205L drum** atfd3mdrmatf d3m 1040L IBc atfd3mIBcatf d3m 20L PaIL atfd3mP20

PC HEAVY DUTY SYNTHETIC BlEND ATF PCHDATFPc HeaVY dutY SYntHetIc BLend atf BuLK PcHdatfBLKPc HeaVY dutY SYntHetIc BLend atf 205L drum* PcHdatfdrmPc HeaVY dutY SYntHetIc BLend atf 20L PaIL PcHdatfP20* also available in decant drums** also available in drum decant and export drums

TRANSMISSION/HYDRAUlIC FlUIDS PAGE 12NAME PArT NuMbErS

DURATRAN DTRANduratran BuLK dtranBLKduratran 2X10L caSe dtranc02duratran 4X4L caSe dtranc16duratran 110L drum dtrandr1duratran 205L drum* dtrandrmduratran 20L PaIL dtranP20 duratran 1040L IBc dtranIBc

DURATRAN Xl SYNTHETIC BlEND DTRANXlduratran XL SYntHetIc BLend BuLK dtranXLBLKduratran XL SYntHetIc BLend 4X4L caSe dtranXLc16duratran XL SYntHetIc BLend 205L drum* dtranXLdrmduratran XL SYntHetIc BLend 20L PaIL dtranXLP20

DURATRAN SYNTHETIC DTRANSY duratran SYntHetIc 205L drum* dtranSYdrmduratran SYntHetIc 20L PaIL dtranSYP20* also available in decant drums

TRANSMISSION/DRIVE TRAIN FlUIDS PAGE 13NAME PArT NuMbErS

PRODURO FD-1 60 FDAO60 Produro fd-1 60 BuLK fdao60BLKProduro fd-1 60 1040L IBc fdao60IBcProduro fd-1 60 205L drum* fdao60drm

PRODURO TO-4+ 10W TRANSMISSION OIl PD410WProduro to-4+ 10W tranSmISSIon oIL BuLK Pd410WBLKProduro to-4+ 10W tranSmISSIon oIL 205L drum* Pd410WdrmProduro to-4+ 10W tranSmISSIon oIL 20L PaIL Pd410WP20 Produro to-4+ 10W tranSmISSIon oIL 1040L IBc Pd410WIBc

PRODURO TO-4+ 30 TRANSMISSION OIl PD430Produro to-4+ 30 tranSmISSIon oIL BuLK Pd430BLKProduro to-4+ 30 tranSmISSIon oIL 205L drum* Pd430drmProduro to-4+ 30 tranSmISSIon oIL 20L PaIL Pd430P20 Produro to-4+ 30 tranSmISSIon oIL 1040L IBc Pd430IBc

PRODURO TO-4+ 50 TRANSMISSION OIl PD450 Produro to-4+ 50 tranSmISSIon oIL BuLK Pd450BLKProduro to-4+ 50 tranSmISSIon oIL 205L drum* Pd450drmProduro to-4+ 50 tranSmISSIon oIL 20L PaIL Pd450P20Produro to-4+ 50 tranSmISSIon oIL 1040L Pd450IBc

PRODURO TO-4+ 60 TRANSMISSION OIl PD460Produro to-4+ 60 tranSmISSIon oIL BuLK Pd460BLKProduro to-4+ 60 tranSmISSIon oIL 205L drum* Pd460drm

PRODURO TO-4+ SYNTHETIC All SEASON PD4ASProduro to-4+ SYntHetIc aLL SeaSon BuLK Pd4aSBLKProduro to-4+ SYntHetIc aLL SeaSon 4X4L caSe** Pd4aSc16 Produro to-4+ SYntHetIc aLL SeaSon 205L drum* Pd4aSdrmProduro to-4+ SYntHetIc aLL SeaSon 20L PaIL Pd4aSP20

PRODURO TO-4+ Xl SYNTHETIC BlEND lOTEMP PD4XllTProduro to-4+ XL SYntHetIc BLend LotemP BuLK Pd4XLLtBLKProduro to-4+ XL SYntHetIc BL LotemP 205L drum* Pd4XLLtdrmProduro to-4+ XL SYntHetIc BL LotemP 20L PaIL Pd4XLLtP20Produro to-4+ XL SYntHetIc BL LotemP 1040L IBc Pd4XLLtIBc*also available in drum decant**only available in north america

SMAll ENGINE OIlS PAGE 14NAME PArT NuMbErS

OUTBOARD MOTOR OIl POMoutBoard motor oIL BuLK PomBLKoutBoard motor oIL 12X1L caSe Pomc12outBoard motor oIL 4X4L caSe Pomc16outBoard motor oIL 24X500mL caSe Pomc24outBoard motor oIL 205L drum Pomdrm

PETRO-CANADA SNOWMOBIlE MOTOR OIl PSNOlSnoWmoBILe motor oIL 12X1L caSe PSnoLc12SnoWmoBILe motor oIL 4X4L caSe PSnoLc16SnoWmoBILe motor oIL 24X500mL caSe PSnoLc24

PETRO-CANADA TWO-CYClE MOTOR OIl TWOCYC2-cYcLe motor oIL BuLK tWocYcBLK2-cYcLe motor oIL 12X1L caSe tWocYcc122-cYcLe motor oIL 205L drum tWocYcdrm

TACkIFIED lUBRICANTS PAGE 15NAME PArT NuMbErS

DURATAC CHAIN OIl 32 DTAC32duratac cHaIn oIL 32 BuLK dtac32BLKduratac cHaIn oIL 32 4X4L caSe dtac32c16duratac cHaIn oIL 32 205L drum** dtac32drm

DURATAC CHAIN OIl 68 DTAC68duratac cHaIn oIL 68 BuLK dtac68BLKduratac cHaIn oIL 68 205L drum* dtac68drmduratac cHaIn oIL 68 20L PaIL dtac68P20

DURATAC CHAIN OIl 100 DTAC100duratac cHaIn oIL 100 BuLK dtac100BLKduratac cHaIn oIL 100 205L drum* dtac100drmduratac cHaIn oIL 100 20L PaIL dtac100P20

DURATAC CHAIN OIl 150 DTAC150duratac cHaIn oIL 150 BuLK dtac150BLKduratac cHaIn oIL 150 4X4L caSe dtac150c16duratac cHaIn oIL 150 205L drum* dtac150drmduratac cHaIn oIL 150 20L PaIL dtac150P20

DURATAC NON DRIP 32 NDRP32duratac non drIP 32 205L drum ndrP32drm

DURATAC NON DRIP 68 NDRP68duratac non drIP 68 205L drum* ndrP68drm

46

DURATAC NON DRIP 100 NDRP100 duratac non drIP 100 205L drum ndrP100drm

DURATAC NON DRIP 150 NDRP150 duratac non drIP 150 205L drum ndrP150drm

DURATAC NON DRIP 220 NDRP220 duratac non drIP 220 205L drum* ndrP220drmduratac non drIP 220 20L PaIL ndrP220P20

PAPER MACHINE OIlS

SEPRO Xl PAPER MACHINE OIl 150 PAPA150SePro XL PaPer macHIne oIL 150 BuLK PaPa150BLKSePro XL PaPer macHIne oIL 150 205L drum* PaPa150drm

SEPRO Xl PAPER MACHINE OIl 220 PAPA220 SePro XL PaPer macHIne oIL 220 BuLK PaPa220BLKSePro XL PaPer macHIne oIL 220 205L drum* PaPa220drm

SAW GUIDE OIlS

PETROGlIDE 68 GlID68 PetroGLIde 68 205L drum GLId68drm

PETROGlIDE 100 GlID100 PetroGLIde 100 BuLK GLId100BLKPetroGLIde 100 205L drum* GLId100drm

PETROGlIDE 150 GlID150 PetroGLIde 150 BuLK GLId150BLKPetroGLIde 150 205L drum* GLId150drm

PETROGlIDE MC 32 GlIDMC32 PetroGLIde mc 32 205L drum* GLIdmc32drm

PETROGlIDE XP 90 GlDXP9PetroGLIde XP 90 205L drum* GLdXP9drm*also available in decant drums

MUlTI-APPlICATION GREASES PAGE 16-17NAME PArT NuMbErS

PRECISION SYNTHETIC PSPrecISIon SYntHetIc 30X400G tuBeS caSe PSc30PrecISIon SYntHetIc 17KG PaIL PSP17PrecISIon SYntHetIc 54KG LIned KeG PSKGLPrecISIon SYntHetIc 175KG LIned drum PSdrLPrecISIon SYntHetIc GreaSe BIn 1700KG PScBGPrecISIon SYntHetIc BuLK PSBLK

PRECISION SYNTHETIC EP00 PS00PrecISIon SYntHetIc eP00 17KG PaIL PS00P17PrecISIon SYntHetIc eP00 54KG LIned KeG PS00KGL

PRECISION SYNTHETIC HEAVY 460 PSHPrecISIon SYntHetIc HeaVY 30X400G tuBeS caSe PSHc30PrecISIon SYntHetIc HeaVY 17KG PaIL PSHP17PrecISIon SYntHetIc HeaVY 54KG LIned KeG PSHKGLPrecISIon SYntHetIc HeaVY 175KG LIned drum PSHdrL

PRECISION SYNTHETIC HEAVY 1500 PSH1500PrecISIon SYntHetIc HeaVY 175KG LIned drum PSH1500drL

PRECISION SYNTHETIC MOlY PSMPrecISIon SYntHetIc moLY 30X400G tuBeS caSe PSmc30PrecISIon SYntHetIc moLY 54KG LIned KeG PSmKGLPrecISIon SYntHetIc moLY 175KG LIned drum PSmdrLPrecISIon SYntHetIc moLY BuLK PSmBLK

PRECISION SYNTHETIC EMB PSEMBPrecISIon SYntHetIc emB 30X400G tuBeS caSe PSemBc30

PRECISION Xl EMB PXlEMBPrecISIon XL emB 30X400G tuBeS caSe PXLemBc30PrecISIon XL emB 17KG PaIL PXLemBP17PrecISIon XL emB 175KG LIned drum PXLemBdrL

PRECISION Xl EP2 PXl2PrecISIon XL eP2 30X400G tuBeS caSe PXL2c30PrecISIon XL eP2 17KG PaIL PXL2P17PrecISIon XL eP2 54KG LIned KeG PXL2KGLPrecISIon XL eP2 175KG LIned drum PXL2drLPrecISIon XL eP2 GreaSe BIn 1700KG PXL2cBG

PRECISION Xl EP1 PXl1PrecISIon XL eP1 30X400G tuBeS caSe PXL1c30PrecISIon XL eP1 17KG PaIL PXL1P17PrecISIon XL eP1 54KG LIned KeG PXL1KGLPrecISIon XL eP1 175KG LIned drum PXL1drL

PRECISION Xl EP00 PXl00PrecISIon XL eP00 17KG PaIL PXL00P17PrecISIon XL eP00 54KG LIned KeG PXL00KGLPrecISIon XL eP00 175KG LIned drum PXL00drLPrecISIon XL eP00 BuLK PXL00BLK

PRECISION Xl EP000 PXl000PrecISIon XL eP000 17KG PaIL PXL000P17PrecISIon XL eP000 175KG LIned drum PXL000drL

PRECISION Xl HEAVY DUTY PXlHDPrecISIon XL HeaVY dutY 175KG LIned drum PXLHddrLPrecISIon XL HeaVY dutY GreaSe BIn 1700KG PXLHdcBG

PRECISION Xl 3 MOlY EP1 PXl3M1PrecISIon XL 3 moLY eP1 30X400G tuBeS caSe PXL3m1c30PrecISIon XL 3 moLY eP1 17KG PaIL PXL3m1P17PrecISIon XL 3 moLY eP1 54KG LIned KeG PXL3m1KGL PrecISIon XL 3 moLY eP1 175KG LIned drum PXL3m1drL PrecISIon XL 3 moLY eP1 GreaSe BIn 1700KG PXL3m1cBG PrecISIon XL 3 moLY eP1 BuLK PXL3m1BLK

PRECISION Xl 3 MOlY EP2 PXl3M2PrecISIon XL 3 moLY eP2 30X400G tuBeS caSe PXL3m2c30PrecISIon XL 3 moLY eP2 17KG PaIL PXL3m2P17PrecISIon XL 3 moLY eP2 54KG LIned KeG PXL3m2KGLPrecISIon XL 3 moLY eP2 175KG LIned drum PXL3m2drL PrecISIon XL 3 moLY eP2 BuLK PXL3m2BLK

PRECISION Xl 3 MOlY ARCTIC PXl3APrecISIon XL 3 moLY arctIc 30X400G tuBeS caSe PXL3ac30PrecISIon XL 3 moLY arctIc 54KG LIned KeG PXL3aKGLPrecISIon XL 3 moLY arctIc 175KG LIned drum PXL3adrLPrecISIon XL 3 moLY arctIc BuLK PXL3aBLK

PRECISION Xl 5 MOlY EP0 PXl5M0PrecISIon XL 5 moLY eP0 175KG LIned drum PXL5m0drLPrecISIon XL 5 moLY eP0 BuLK PXL5m0BLK

PRECISION Xl 5 MOlY EP1 PXl5M1PrecISIon XL 5 moLY eP1 30X400G tuBeS caSe PXL5m1c30PrecISIon XL 5 moLY eP1 54KG LIned KeG PXL5m1KGLPrecISIon XL 5 moLY eP1 175KG LIned drum PXL5m1drL PrecISIon XL 5 moLY eP1 GreaSe BIn PXL5m1cBGPrecISIon XL 5 moLY eP1 BuLK PXL5m1BLK

PRECISION Xl 5 MOlY EP2 PXl5M2PrecISIon XL 5 moLY eP2 30X400G tuBeS caSe PXL5m2c30PrecISIon XL 5 moLY eP2 17KG PaIL PXL5m2P17PrecISIon XL 5 moLY eP2 54KG LIned KeG PXL5m2KGLPrecISIon XL 5 moLY eP2 175KG LIned drum PXL5m2drLPrecISIon XL 5 moLY eP2 BuLK PXL5m2BLK

PRECISION Xl RAIl CURVE GREASE PXlRCPrecISIon XL raIL curVe GreaSe 17KG PaIL PXLrcGP17PrecISIon XL raIL curVe GreaSe 54KG LIned KeG PXLrcGKGLPrecISIon XL raIL curVe GreaSe 175KG LIned drum PXLrcGdrLPrecISIon XL raIL curVe GreaSe BIn 1700KG PXLrcGcBG

PRECISION GENERAl PURPOSE EP1 PGP1PrecISIon GeneraL PurPoSe eP1 30X400G tuBeS caSe PGP1c30PrecISIon GeneraL PurPoSe eP1 17KG PaIL PGP1P17PrecISIon GeneraL PurPoSe eP1 54KG LIned KeG PGP1KGLPrecISIon GeneraL PurPoSe eP1 175KG LIned drum PGP1drL

PRECISION GENERAl PURPOSE EP2 PGP2PrecISIon GeneraL PurPoSe eP2 30X400G tuBeS caSe PGP2c30PrecISIon GeneraL PurPoSe eP2 17KG PaIL PGP2P17PrecISIon GeneraL PurPoSe eP2 54KG LIned KeG PGP2KGLPrecISIon GeneraL PurPoSe eP2 175KG LIned drum PGP2drLPrecISIon GeneraL PurPoSe eP2 GreaSe BIn 1700KG PGP2cBGPrecISIon GeneraL PurPoSe eP2 BuLK PGP2BLK

PRECISION GENERAl PURPOSE MOlY EP2 PGM2PrecISIon GeneraL PurPoSe moLY eP2 30X400G tuBeS caSe PGPm2c30PrecISIon GeneraL PurPoSe moLY eP2 17KG PaIL PGPm2P17PrecISIon GeneraL PurPoSe moLY eP2 54KG LIned KeG PGPm2KGLPrecISIon GeneraL PurPoSe moLY eP2 175KG LIned drum PGPm2drLPrecISIon GeneraL PurPoSe moLY eP2 GreaSe BIn 1700KG PGPm2cBGPrecISIon GeneraL PurPoSe moLY eP2 BuLK PGPm2BLK

PEERlESS llG PlllGPeerLeSS LLG 30X400G tuBeS caSe PLLLGc30PeerLeSS LLG 17KG PaIL PLLLGP17PeerLeSS LLG 54KG LIned KeG PLLLGKGLPeerLeSS LLG 175KG LIned drum PLLLGdrL

PEERlESS OG0 Pl0G0PeerLeSS oG0 30X400G tuBeS caSe PLoG0c30 PeerLeSS oG0 54KG LIned KeG PLoG0KGL PeerLeSS oG0 175KG LIned drum PLoG0drL

PEERlESS OG1 PlOG1PeerLeSS oG1 30X400G tuBeS caSe PLoG1c30PeerLeSS oG1 17KG PaIL PLoG1P17PeerLeSS oG1 54KG LIned KeG PLoG1KGLPeerLeSS oG1 175KG LIned drum PLoG1drL

PEERlESS OG2 PlOG2PeerLeSS oG2 30X400G tuBeS caSe PLoG2c30PeerLeSS oG2 17KG PaIL PLoG2P17PeerLeSS oG2 54KG LIned KeG PLoG2KGLPeerLeSS oG2 175KG LIned drum PLoG2drL

PEERlESS OG2 RED PlOG2RPeerLeSS oG2 red 30X400G tuBeS caSe PLoG2rc30PeerLeSS oG2 red 17KG PaIL PLoG2rP17PeerLeSS oG2 red 54KG LIned KeG PLoG2rKGLPeerLeSS oG2 red 175KG LIned drum PLoG2rdrL

PEERlESS OG PlUS PlOGPPeerLeSS oG PLuS 30X400G tuBeS caSe PLoGPc30PeerLeSS oG PLuS 54KG LIned KeG PLoGPKGL

PeerLeSS oG PLuS 175KG LIned drum PLoGPdrL

PEERlESS SVG 102 PlSVGPeerLeSS SVG 102 175KG LIned drum PLSVGdrL

PEERlESS XCG-FlEX PlXCGPeerLeSS XcG-fLeX 30X400G tuBeS caSe PLXcGc30PeerLeSS XcG-fLeX 17KG PaIL PLXcGP17

MINING GREASES PAGE 18-19NAME PArT NuMbErS

VUlTREX MPG SYNTHETIC ARCTIC VUlMPGAVuLtreX mPG SYn arctIc BuLK VuLmPGaBLKVuLtreX mPG SYn arctIc 30X400G tuBeS caSe VuLmPGac30VuLtreX mPG SYn arctIc GreaSe BIn 1700KG VuLmPGacBGVuLtreX mPG SYn arctIc 175KG LIned drum VuLmPGadrLVuLtreX mPG SYn arctIc 54KG LIned KeG VuLmPGaKGL

VUlTREX MPG EP1 VUlMPG1VuLtreX mPG eP1 BuLK VuLmPG1BLKVuLtreX mPG eP1 30X400G tuBeS caSe VuLmPG1c30VuLtreX mPG eP1 GreaSe BIn 1700KG VuLmPG1cBGVuLtreX mPG eP1 175KG LIned drum VuLmPG1drLVuLtreX mPG eP1 54KG LIned KeG VuLmPG1KGL

VUlTREX MPG EP2 VUlMPG2VuLtreX mPG eP2 BuLK (tranSfer onLY) VuLmPG2BLKVuLtreX mPG eP2 30X400G tuBeS caSe VuLmPG2c30VuLtreX mPG eP2 GreaSe BIn 1700KG VuLmPG2cBGVuLtreX mPG eP2 175KG LIned drum VuLmPG2drLVuLtreX mPG eP2 54KG LIned KeG VuLmPG2KGL VuLtreX mPG eP2 17KG PaIL VuLmPG2P17

VUlTREX G-123 VUlG123VuLtreX G-123 30X400G tuBeS caSe VuLG123c30VuLtreX G-123 54KG LIned KeG VuLG123KGL

VUlTREX G-124 VUlG124VuLtreX G-124 30X400G tuBeS caSe VuLG124c30VuLtreX G-124 175KG drum VuLG124drLVuLtreX G-124 54KG LIned KeG VuLG124KGL

VUlTREX OGl SYNTHETIC All SEASON 680 VUlOGlSVuLtreX oGL SYn aLL SeaS 680 BuLK VuLoGLSBLKVuLtreX oGL SYn aLL SeaS 680 BIn 1700KG VuLoGLScBGVuLtreX oGL SYn aLL SeaS 680 175KG LIned drum VuLoGLSdrLVuLtreX oGL SYn aLL SeaS 680 54KG LIned KeG VuLoGLSKGL

VUlTREX OGl SYNTHETIC ARCTIC VUlOGlAVuLtreX oGL SYn arctIc BuLK VuLoGLaBLKVuLtreX oGL SYn arctIc BIn 1700KG VuLoGLacBGVuLtreX oGL SYn arctIc 175KG LIned drum VuLoGLadrL

VUlTREX EGF 1000 VUlEGFVuLtreX eGf 1000 BuLK VuLeGfBLKVuLtreX eGf 1000 175KG LIned drum VuLeGfdrLVuLtreX eGf 1000 54KG LIned KeG VuLeGfKGL

VUlTREX OGl HEAVY 6200 VUl6200VuLtreX oGL HeaVY 6200 54 KG KeG VuL6200K54

VUlTREX OGl SYNTHETIC 2200 VUl2200VuLtreX oGL SYn 2200 175KG LIned drum VuL2200drLVuLtreX oGL SYn 2200 GreaSe BIn 1700KG VuL2200cBGVuLtreX oGL SYn 2200 BuLK VuL2200BLK

VUlTREX GEAR DRESSING EP VUlGDEPVuLtreX Gear dreSSInG eP 25X310G tuBeS caSe VuLGdePc25

VUlTREX GEAR SHIElD NC VUlGSNCVuLtreX Gear SHIeLd nc BuLK VuLGSncBLKVuLtreX Gear SHIeLd nc 175KG LIned drum VuLGSncdrLVuLtreX Gear SHIeLd nc 54KG LIned KeG VuLGSncKGL

SPECIAlTY GREASES PAGE 20-21NAME PArT NuMbErS

VUlTREX ROCk DRIll EP000 VUlRDVuLtreX rocK drILL eP000 170KG LIned drum VuLrddrZVuLtreX rocK drILL eP000 12X800 G BottLeS VuLrdL12VuLtreX rocK drILL eP000 17KG PaIL VuLrdP17

VUlTREX DRIll ROD HEAVY VUlDRODVuLtreX drILL rod HeaVY 175KG LIned drum VuLdroddrLVuLtreX drILL rod HeaVY 17KG PaIL VuLdrodP17

VUlTREX TOOl JOINT COMPOUND VUlTOOlVuLtreX tooL JoInt comPound 17KG PaIL VuLtooLP17VUlTREX API MODIFIED THREAD COMPOUND VUlTHRDVuLtreX aPI modIfIed tHread 17KG PaIL VuLtHrdP17THERMEXtHermeX 17KG PaIL tHrmXP17tHermeX 30X400G tuBeS caSe tHrmXc30tHermeX 54 KG LIned KeG tHrmXKGLtHermeX 175KG LIned drum tHrmXdrL

47

INDUSTRIAl GEAR OIlS PAGE 22-23NAME PArT NuMbErS

SYNDURO SHB 32 SYNTHETIC FlUID SYND32SYnduro SHB 32 SYntHetIc fLuId 205L drum SYnd32drmSYnduro SHB 32 20L PaIL SYnd32P20

SYNDURO SHB 46 SYND46 SYnduro SHB 46 205L drm SYnd46drmSYnduro SHB 46 20L PaIL SYnd46P20

SYNDURO SHB 68 SYND68SYnduro SHB 68 205L drum SYnd68drmSYnduro SHB 68 20L PaIL SYnd68P20

SYNDURO SHB 150 SYND150 SYnduro SHB 150 205L drum SYnd150drmSYnduro SHB 150 20L PaIL SYnd150P20

SYNDURO SHB 220 SYND220 SYnduro SHB 220 205L drum SYnd220drmSYnduro SHB 220 20L PaIL SYnd220P20

SYNDURO SHB 460 SYND460 SYnduro SHB 460 205L drum SYnd460drm

TURBOFlO R&O 10 TFRO10 turBofLo r&o 10 BuLK tfro10BLKturBofLo r&o 10 205L drum tfro10drm turBofLo r&o 10 20L PaIL tfro10P20

TURBOFlO R&O 22 TFRO22 turBofLo r&o 22 BuLK tfro22BLK turBofLo r&o 22 205L drum* tfro22drm turBofLo r&o 22 20L PaIL tfro22P20

TURBOFlO R&O 32 TFRO32 turBofLo r&o 32 BuLK tfro32BLK turBofLo r&o 32 205L drum tfro32drm turBofLo r&o 32 20L PaIL tfro32P20

TURBOFlO R&O 46 TFRO46turBofLo r&o 46 BuLK tfro46BLK turBofLo r&o 46 205L drum* tfro46drm turBofLo r&o 46 20L PaIL tfro46P20

TURBOFlO R&O 68 TFRO68 turBofLo r&o 68 BuLK tfro68BLKturBofLo r&o 68 205L drum* tfro68drmturBofLo r&o 68 20L PaIL tfro68P20turBofLo r&o 68 208L drum tfro68drr

PREMIUM R&O 77 HAR77 PremIum r&o 77 oIL 205L drum* Har77drm

TURBOFlO R&O 100 TFRO100 turBofLo r&o 100 205L drum* tfro100drm turBofLo r&o 100 20L PaIL tfro100P20 turBofLo r&o 100 208L drum tfro100drr

TURBOFlO R&O 150 TFRO150 turBofLo r&o 150 BuLK tfro150BLK turBofLo r&o 150 205L drum* tfro150drm turBofLo r&o 150 20L PaIL tfro150P20

TURBOFlO R&O 220 TFRO220 turBofLo r&o 220 BuLK tfro220BLK turBofLo r&o 220 205L drum tfro220drm turBofLo r&o 220 20L PaIL tfro220P20

TURBOFlO R&O 320 TFRO320 turBofLo r&o 320 BuLK tfro320BLK turBofLo r&o 320 205L drum* tfro320drm

ENDURATEX EP 32 GEAR OIl ENT32endurateX eP 32 Gear oIL 205L drum ent32drm

ENDURATEX EP 68 GEAR OIl ENT68endurateX eP 68 Gear oIL BuLK ent68BLK endurateX eP 68 Gear oIL 205L drum** ent68drmendurateX eP 68 Gear oIL 20L PaIL ent68P20

ENDURATEX EP 100 GEAR OIl ENT100endurateX eP 100 Gear oIL BuLK ent100BLKendurateX eP 100 Gear oIL 205L drum** ent100drmendurateX eP 100 Gear oIL 20L PaIL ent100P20


ENDURATEX EP 220 GEAR OIl ENT220endurateX eP 220 Gear oIL BuLK ent220BLKendurateX eP 220 Gear oIL IBc ent220IBcendurateX eP 220 Gear oIL 205L drum** ent220drmendurateX eP 220 Gear oIL 20L PaIL ent220P20


ENDURATEX EP 460 GEAR OIl ENT460endurateX eP 460 Gear oIL BuLK ent460BLK

endurateX eP 460 Gear oIL 205L drum** ent460drmendurateX eP 460 Gear oIL 20L PaIL ent460P20

ENDURATEX EP 680 GEAR OIl ENT680endurateX eP 680 Gear oIL 205L drum** ent680drm endurateX eP 680 Gear oIL 20L PaIL ent680P20

ENDURATEX EP 1000 GEAR OIl ENT1000endurateX eP 1000 Gear oIL 205L drum ent1000drm

ENDURATEX Xl SYNTHETIC BlEND 68/150 GEAR OIl ENT6815endurateX XL SYntHetIc BLend 68/150 Gear oIL BuLK ent6815BLKendurateX XL SYntHetIc BLend 68/150 Gear oIL 205L drum* ent6815drmendurateX XL SYntHetIc BLend 68/150 Gear oIL 1040L IBc ent6815IBc

ENDURATEX Xl SYNTHETIC BlEND 68/220 GEAR OIl ENT6822endurateX XL SYntHetIc BLend 68/220 Gear oIL BuLK ent6822BLKendurateX XL SYntHetIc BLend 68/220 Gear oIL 205L drum* ent6822drmendurateX XL SYntHetIc BLend 68/220 Gear oIL 20L PaIL ent6822P20

ENDURATEX SYNTHETIC EP 150 ENTS150endurateX SYntHetIc eP 150 205L drum* entS150drmendurateX SYntHetIc eP 150 20L PaIL entS150P20

ENDURATEX SYNTHETIC EP 220 ENTS220endurateX SYntHetIc eP 220 205L drum* entS220drmendurateX SYntHetIc eP 220 20L PaIL entS220P20

ENDURATEX SYNTHETIC EP 320 ENTS320endurateX SYntHetIc eP 320 205L drum* entS320drm

ENDURATEX SYNTHETIC EP 460 ENTS460endurateX SYntHetIc eP 460 205L drum* entS460drm

ENDURATEX MIlD WORM GEAR OIl 460 ENTW460endurateX mILd Worm Gear oIL 460 BuLK entW460BLKendurateX mILd Worm Gear oIL 460 20L PaIL entW460P20endurateX mILd Worm Gear oIL 460 205L drum entW460drmENDURATEX MIlD WORM GEAR OIl 680 ENTW680endurateX mILd Worm Gear oIL 680 205L drum entW680drm

ENDURATEX MIlD WORM GEAR OIl 1000 ENTW100endurateX mILd Worm Gear oIL 1000 205L drum entW100drm* also available in decant drums ** also available in drum decant and export drums

INDUSTRIAl HYDRAUlIC FlUIDS PAGE 24-25NAME PArT NuMbErS

HYDREX AW 22 HYDRAUlIC OIl HDXAW22 HYdreX aW 22 HYdrauLIc oIL 205L drum* HdXaW22drm HYdreX aW 22 HYdrauLIc oIL BuLK HdXaW22BLK HYdreX aW 22 HYdrauLIc oIL 20L PaIL HdXaW22P20

HYDREX AW 32 HYDRAUlIC OIl HDXAW32 HYdreX aW 32 HYdrauLIc oIL BuLK HdXaW32BLK HYdreX aW 32 HYdrauLIc oIL 205L drum** HdXaW32drm HYdreX aW 32 HYdrauLIc oIL 20L PaIL HdXaW32P20 HYdreX aW 32 HYdrauLIc oIL 1040L IBc HdXaW32IBc

HYDREX AW 46 HYDRAUlIC OIl HDXAW46 HYdreX aW 46 HYdrauLIc oIL BuLK HdXaW46BLK HYdreX aW 46 0557-30XJ 1100L cuBe HdXaW46cuS HYdreX aW 46 HYdrauLIc oIL 1040L IBc HdXaW46IBc HYdreX aW 46 HYdrauLIc oIL 205L drum** HdXaW46drm HYdreX aW 46 HYdrauLIc oIL 20L PaIL HdXaW46P20

HYDREX AW 68 HYDRAUlIC OIl HDXAW68 HYdreX aW 68 HYdrauLIc oIL BuLK HdXaW68BLK HYdreX aW 68 HYdrauLIc oIL 1040L IBc HdXaW68IBc HYdreX aW 68 HYdrauLIc oIL 205L drum** HdXaW68drm HYdreX aW 68 HYdrauLIc oIL 20L PaIL HdXaW68P20

HYDREX AW 80 HYDRAUlIC OIl HDXAW80 HYdreX aW 80 HYdrauLIc oIL BuLK HdXaW80BLK

HYDREX AW 100 HYDRAUlIC OIl HDXAW10 HYdreX aW 100 HYdrauLIc oIL BuLK HdXaW10BLK HYdreX aW 100 HYdrauLIc oIL 205L drum** HdXaW10drm HYdreX aW 100 HYdrauLIc oIL 20L PaIL HdXaW10P20

HYDREX MV 22 HYDRAUlIC OIl HDXMV22 HYdreX mV 22 HYdrauLIc oIL BuLK HdXmV22BLK HYdreX mV 22 HYdrauLIc oIL 205L drum** HdXmV22drm HYdreX mV 22 HYdrauLIc oIL 20L PaIL HdXmV22P20

HYDREX MV 36 HYDRAUlIC OIl HDXMV36 HYdreX mV 36 HYdrauLIc oIL BuLK HdXmV36BLK HYdreX mV 36 HYdrauLIc oIL 205L drum** HdXmV36drm HYdreX mV 36 HYdrauLIc oIL 20L PaIL HdXmV36P20 HYdreX mV 36 HYdrauLIc oIL 1040L IBc HdXmV36IBc

HYDREX MV 60 HYDRAUlIC OIl HDXMV60 HYdreX mV 60 HYdrauLIc oIL BuLK HdXmV60BLK HYdreX mV 60 HYdrauLIc oIL 205L drum** HdXmV60drm HYdreX mV 60 HYdrauLIc oIL 20L PaIL HdXmV60P20

HYDREX XV All SEASON HYDRAUlIC OIl HDXASHYdreX XV aLL SeaSon HYd. oIL BuLK HdXaSBLK HYdreX XV aLL SeaSon HYd. oIL 4X4L JuG HdXaSc16 HYdreX XV aLL SeaSon HYd. oIL 205L drum* HdXaSdrm HYdreX XV aLL SeaSon HYd. oIL 20L PaIL HdXaSP20 HYdreX XV aLL SeaSon HYdrauLIc oIL 1040L IBc HdXaSIBc

ENVIRON AW 32 HYDRAUlIC OIl ENVAW32 enVIron aW 32 BuLK enVaW32BLKenVIron aW 32 205L drum* enVaW32drmenVIron aW 32 HYdrauLIc oIL 20L PaIL enVaW32P20

ENVIRON AW 46 HYDRAUlIC OIl ENVAW46enVIron aW 46 BuLK enVaW46BLKenVIron aW 46 205L drum* enVaW46drmenVIron aW 46 20L PaIL enVaW46P20

ENVIRON AW 68 HYDRAUlIC OIl ENVAW68enVIron aW 68 BuLK enVaW68BLKenVIron aW 68 205L drum* enVaW68drm

ENVIRON MV 32 HYDRAUlIC OIl ENVMV32enVIron mV 32 BuLK enVmV32BLKenVIron mV 32 205L drum* enVmV32drmenVIron mV 32 20L PaIL enVmV32P20

ENVIRON MV 46 HYDRAUlIC OIl ENVMV46enVIron mV 46 205L drum* enVmV46drmenVIron mV 46 20L PaIL enVmV46P20enVIron mV 46 1040L IBc enVmV46IBc

HYDREX EXTREME HYDRAUlIC OIl HDXEXTHYdreX eXtreme 1040L IBc HdXeXtIBcHYdreX eXtreme 205L drum* HdXeXtdrmHYdreX eXtreme 20L PaIL HdXeXtP20

HYDREX MV ARCTIC 15 HYDRAUlIC OIl HDXAR15 HYdreX mV arctIc 15 HYdrauLIc oIL BuLK HdXar15BLK HYdreX mV arctIc 15 HYdrauLIc oIL 205L drum* HdXar15drm HYdreX mV arctIc 15 HYdrauLIc oIL 20L PaIL HdXar15P20

HYDREX DT 46 HYDRAUlIC OIl HDXDT46 HYdreX dt 46 HYdrauLIc oIL BuLK HdXdt46BLKHYdreX dt 46 HYdrauLIc oIL 205L drum* HdXdt46drm* also available in decant drums ** also available in drum decant and export drums

TURBINE FlUIDS & WIND TURBINE GEAR OIlS PAGE 26-27

NAME PArT NuMbErS

TURBOFlO 32 TF32 turBofLo 32 BuLK tf32BLK turBofLo 32 205L drum* tf32drmturBofLo 32 208L drum tf32drr

TURBOFlO 46 TF46 turBofLo 46 BuLK tf46BLK turBofLo 46 205L drum tf46drm

TURBOFlO 68 TF68 turBofLo 68 BuLK tf68BLK turBofLo 68 205L drum tf68drmturBofLo 68 208L drum tf68drr

TURBOFlO EP 32 TFEP32 turBofLo eP 32 BuLK tfeP32BLK turBofLo eP 32 205L drum tfeP32drm

TURBOFlO EP 46 TFEP46 turBofLo eP 46 BuLK tfeP46BLK turBofLo eP 46 205L drum tfeP46drm

TURBOFlO Xl 32 TFXl32 turBofLo XL 32 BuLK tfXL32BLK turBofLo XL 32 205L drum tfXL32drm



TURBONYCOIl 600 TN600 turBonYcoIL 600 208L drum tn600dru

HARNEX WIND TURBINE GEAR OIl HNX320 HarneX 320 205L drum HnX320drX* also available in decant drums

NATURAl GAS ENGINE OIlS PAGE 28-29NAME PArT NuMbErS

SENTRON 541C STl541 Sentron 541c BuLK StL541BLKSentron 541c 205L drum StL541drm

SENTRON lD 5000 STN5lD Sentron Ld 5000 BuLK Stn5LdBLKSentron Ld 5000 205L drum* Stn5LddrmSentron Ld 5000 20L PaIL Stn5LdP20

48

SENTRON lD SYNTHETIC BlEND STNlDSBSentron Ld SYntHetIc BLend BuLK StnLdSBBLKSentron Ld SYntHetIc BLend 205L drum* StnLdSBdrm

SENTRON 470 STl470Sentron 470 BuLK StL470BLKSentron 470 205L drum* StL470drm

SENTRON 445 STl445Sentron 445 BuLK StL445BLKSentron 445 205L drum** StL445drm

SENTRON MG 440 STl440Sentron mG 440 BuLK StL440BLKSentron mG 440 205L drum* StL440drmSentron mG 440 20L PaIL StL440P20

SENTRON CG40 STlCGSentron cG40 205L drum** StLcGdrm

SENTRON 840 STl840Sentron 840 BuLK StL840BLKSentron 840 205L drum* StL840drm

SENTRON 590 STl590Sentron 590 20L PaIL StL590P20Sentron 590 205L drum* StL590drmSentron 590 BuLK StL590BLK

SENTRON FlEET 10W-40 STNF14Sentron fLeet 10W-40 12X1L caSe Stnf14c12Sentron fLeet 10W-40 4X4L caSe Stnf14c16Sentron fLeet 10W-40 205L drum Stnf14drmSentron fLeet 10W-40 20L PaIL Stnf14P20

SENTRON FlEET 0W-30 STNF03Sentron fLeet 0W-30 BuLK Stnf03BLKSentron fLeet 0W-30 4X4L caSe Stnf03c16Sentron fLeet 0W-30 205L drum Stnf03drmSentron fLeet 0W-30 20L PaIL Stnf03P20* also available in decant drums ** also available in drum decant and export drums

COMPRESSOR FlUIDS PAGE 30-31 NAME PArT NuMbErS

COMPRO 32 CP32comPro comPreSSor fLuId 32 205L drum cP32drmcomPro comPreSSor fLuId 32 20L PaIL cP32P20


COMPRO 100 CP100comPro comPreSSor fLuId 100 BuLK cP100BLKcomPro comPreSSor fLuId 100 205L drum cP100drmcomPro comPreSSor fLuId 100 20L PaIL cP100P20


COMPRO SYNTHETIC CPSYN32comPro SYntHetIc comPreSSor fLuId 208L drum cPSYn32drucomPro SYn comPreSSor fLuId 5 uSG PaIL cPSYn32P5u

COMPRO Xl-R CPXRcomPro XL-r comPreSSor fLuId 205L drum cPXrdrmcomPro XL-r comPreSSor fLuId 20L PaIL cPXrP20

COMPRO Xl-S 32 CPXS32comPro XL-S comPreSSor fLuId 32 205L drum cPXS32drmcomPro XL-S comPreSSor fLuId 32 20L PaIL cPXS32P20



COMPRO Xl-S 100 CPXS100comPro XL-S comPreSSor fLuId 100 205L drum cPXS100dcomPro XL-S comPreSSor fLuId 100 20L PaIL cPXS100P20


COMPRESSOR OIl RP 268 CRP268comPreSSor oIL rP 268 BuLK crP268BLKcomPreSSor oIL rP 268 205L drum* crP268drm

COMPRESSOR OIl RP 460 CMP460CcomPreSSor oIL rP 460 BuLK cmP460cBLKcomPreSSor oIL rP 460 205L drum cmP460cdrm

REFlO CFC REFlCFCrefLo cfc 205L drum refLcfcdrmrefLo cfc 20L PaIL refLcfcP20

SPX 5000 SPX5000SPX 5000 208L drum SPX5000dru

SPX 5000 5 uSG PaIL SPX5000P5u

SPX 7000 SPX7000SPX 7000 208L drum SPX7000druSPX 7000 5 uSG PaIL SPX7000P5u

SPX 7100 SPX7100SPX 7100 5 uSG PaIL SPX7100P5uSPX 7100 55 uSG drum eXPort SPX7100dru

NGS 1000 NGS1000nGS 1000 208L drum nGS1000dru nGS 1000 5 uSG PaIL nGS1000P5u

NGS 1500 NGS1500nGS 1500 208L drum nGS1500dru nGS 1500 5 uSG PaIL nGS1500P5u

REFlO 46A REFlO46ArefLo 46a ammonIa oIL 205L refL46adrX

REFlO 68A REFl68ArefLo 68a ammonIa oIL BuLK refL68aBLKrefLo 68a ammonIa oIL 205L drum refL68adrmrefLo 68a ammonIa oIL 20L PaIL refL68aP20

REFlO SYNTHETIC 68A RFSY68ArefLo SYntHetIc 68a ammonIa oIL 205L drum rfSY68adrmrefLo SYntHetIc 68a ammonIa oIL 20L PaIL rfSY68aP20

REFlO Xl RFlXlArefLo XL ammonIa oIL BuLK rfLXLaBLKrefLo XL ammonIa oIL 205 drum rfLXLadrmrefLo XL ammonIa oIL 20 L PaIL rfLXLaP20* also available in drum decant

HEAT TRANSFER FlUIDS PAGE 32-33NAME PArT NuMbErS

PURITY FG HEAT TRANSFER FlUID PFHTFPurItY fG Heat tranSfer fLuId IBc PfHtfIBcPurItY fG Heat tranSfer fLuId 205L drum PfHtfdrmPurItY fG Heat tranSfer fLuId 20L PaIL PfHtfP20

CAlFlO HTF CAlHTFcaLfLo Htf BuLK caLHtfBLKcaLfLo Htf 205L drum caLHtfdrm

CAlFlO lT CAllTcaLfLo Lt BuLK caLLtBLKcaLfLo Lt 205L drum caLLtdrm

CAlFlO SYNTHETIC CAlSYNAcaLfLo SYntHetIc IBc caLSYnaIBccaLfLo SYntHetIc drum caLSYnadrm

CAlFlO AF CAlAFcaLfLo af BuLK caLafBLK caLfLo af 205L drum caLafdrm caLfLo af 55 uSG drum caLafdrr caLfLo af 20L PaIL caLafP20 caLfLo af 5 uSG PaIL caLafP5r caLfLo af 1040L IBc caLafIBc

PETRO-THERM PTHERM Petro-tHerm BuLK PtHermBLK Petro-tHerm 1040L IBc PtHermIBcPetro-tHerm 205L drum* PtHermdrm

PETRO-THERM PPD PTHERMPPetro-tHerm PPd BuLK PtHermPBLK* also available in decant drums and export drums

METAl WORkING OIlS PAGE 34-35 NAME PArT NuMbErS

TRANSICUT 25 TCUT25 tranSIcut 25 205L drum tcut25drm

TRANSICUT 32 TCUT32 tranSIcut 32 205L drum tcut32drm

AlUCUT AlUCUT aLucut 205L drum aLucutdrm

SUPERCUT 13 SCUT13 SuPercut 13 BuLK Scut13BLK SuPercut 13 205L drum Scut13drm

SUPERCUT 25 SCUT25 SuPercut 25 205L drum Scut25drm SuPercut 25 20L PaIL Scut25P20

SUPERCUT 45 SCUT45 SuPercut 45 205L drum Scut45drmSuPercut 45 20L PaIL Scut45P20

CUTSOl HD CTSOlHD cutSoL Hd 205L drum ctSoLHddrm cutSoL Hd 20L PaIL ctSoLHdP20

CUTSOl CTSOlcutSoL 205L drum ctSoLdrm cutSoL 20L PaIL ctSoLP20

AlUDRAW 850 ADRAW8 aLudraW 850 BuLK adraW8BLK aLudraW 850 205L drum adraW8drm

FOOD GRADE lUBRICANTS PAGE 36-40 NAME PArT NuMbErS

PURITY FG GREASES

PURITY FG2 WITH MICROl MAX GREASE PFGMICMPurItY fG2 WItH mIcroL maX 12X355mL aeroSoL canS PfGmIcmB12 PurItY fG2 WItH mIcroL maX 30X400G tuBeS PfGmIcmc30PurItY fG2 WItH mIcroL maX 17KG PaIL PfGmIcmP17PurItY fG2 WItH mIcroL maX LIned KeG 54KG PfGmIcmKGL

PURITY FG2 GREASE PFG2PurItY fG2 GreaSe 30X400G tuBeS PfG2c30PurItY fG2 GreaSe 17KG PaIL PfG2P17PurItY fG2 GreaSe 54KG LIned KeG PfG2KGLPurItY fG2 GreaSe 175KG LIned drum PfG2drL

PURITY FG1 GREASE PFG1PurItY fG1 GreaSe 30X400G tuBeS caSe PfG1c30PurItY fG1 GreaSe 17KG PaIL PfG1P17

PURITY FG00 GREASE PFG00PurItY fG00 17KG PaIL PfG00P17PurItY fG00 175KG LIned drum PfG00drL

PURITY FG2 SYNTHETIC GREASE PFGSYN2PurItY fG2 SYntHetIc GreaSe 30X400G tuBeS PfGSYn2c30PurItY fG2 SYntHetIc GreaSe 17KG PaIL PfGSYn2P17PurItY fG2 SYntHetIc GreaSe 54KG LIned KeG PfGSYn2KGLPurItY fG2 SYntHetIc GreaSe 175KG LIned drum PfGSYn2drL

PURITY FG2 EXTREME GREASE PFGEX2 PurItY fG2 eXtreme GreaSe 30X400G tuBeS PfGeX2c30 PurItY fG2 eXtreme GreaSe 17KG PaIL PfGeX2P17 PurItY fG2 eXtreme GreaSe 54KG LIned KeG PfGeX2KGL PurItY fG2 eXtreme GreaSe 175KG LIned drum PfGeX2drL

PURITY FG2 ClEAR GREASE PFGCl2PurItY fG2 cLear GreaSe 30X400G tuBeS PfGcL2c30PurItY fG2 cLear GreaSe 17KG PaIL PfGcL2P17PurItY fG2 cLear GreaSe 54KG LIned KeG PfGcL2KGLPurItY fG2 cLear GreaSe 175KG LIned drum PfGcL2drL

PURITY FG FlUIDS

PURITY FG AW 32 HYDRAUlIC FlUID WITH MICROl PFMAW32PurItY fG aW 32 HYdrauLIc fLuId WItH mIcroL 205L drum* PfmaW32drXPurItY fG aW 32 HYdrauLIc fLuId WItH mIcroL 20L PaIL PfmaW32P20

PURITY FG AW 32 HYDRAUlIC FlUID PFAW32PurItY fG aW 32 HYdrauLIc fLuId IBc PfaW32IBcPurItY fG aW 32 HYdrauLIc fLuId 205L drum* PfaW32drXPurItY fG aW 32 HYdrauLIc fLuId 20L PaIL PfaW32P20


PURITY FG AW 46 HYDRAUlIC FlUID PFAW46 PurItY fG aW 46 HYdrauLIc fLuId IBc PfaW46IBc PurItY fG aW 46 HYdrauLIc fLuId 205L drum* PfaW46drX PurItY fG aW 46 HYdrauLIc fLuId 20L PaIL PfaW46P20


PURITY FG AW 68 HYDRAUlIC FlUID PFAW68 PurItY fG aW 68 HYdrauLIc fLuId IBc PfaW68IBc PurItY fG aW 68 HYdrauLIc fLuId 205L drum* PfaW68drXPurItY fG aW 68 HYdrauLIc fLuId 20L PaIL PfaW68P20

PURITY FG AW 100 HYDRAUlIC FlUID WITH MICROl PFMAW10PurItY fG aW 100 HYdrauLIc fLuId WItH mIcroL 205L drum* PfmaW10drX

PURITY FG AW 100 HYDRAUlIC FlUID PFAW100 PurItY fG aW 100 HYdrauLIc fLuId 205L drum* PfaW100drX

PURITY FG EP100 GEAR FlUID WITH MICROl PFMEP10PurItY fG eP100 Gear fLuId WItH mIcroL 205L drum* PfmeP10drXPurItY fG eP100 Gear fLuId WItH mIcroL 20L PaIL PfmeP10P20

PURITY FG EP100 GEAR FlUID PFEP100 PurItY fG eP100 Gear fLuId IBc PfeP100IBcPurItY fG eP100 Gear fLuId 205L drum* PfeP100drX PurItY fG eP100 Gear fLuId 20L PaIL PfeP100P20


PURITY FG EP150 GEAR FlUID PFEP150 PurItY fG eP150 Gear fLuId 205L drum* PfeP150drX PurItY fG eP150 Gear fLuId 20L PaIL PfeP150P20


49



PURITY FG EP460 GEAR FlUID PFEP460PurItY fG eP460 Gear fLuId IBc PfeP460IBcPurItY fG eP460 Gear fLuId 205L drum* PfeP460drXPurItY fG eP460 Gear fLuId 20L PaIL PfeP460P20

PURITY FG SYNTHETIC EP220 GEAR FlUID PFSN220 PurItY fG SYn eP220 Gear fLuId 205L drum* PfSn220dru PurItY fG SYn eP220 Gear fLuId 20L PaIL PfSn220P20

PURITY FG CHAIN FlUID - HEAVY PFCHAH PurItY fG cHaIn fLuId HeaVY 205L drum* PfcHaHdrXPurItY fG cHaIn fLuId HeaVY 20L PaIL PfcHaHP20

PURITY FG CHAIN FlUID - lIGHT PFCHAl PurItY fG cHaIn fLuId LIGHt 205L drum* PfcHaLdrX PurItY fG cHaIn fLuId LIGHt 20L PaIL PfcHaLP20

PURITY FG 32 COMPRESSOR FlUID PFCO32 PurItY fG 32 comPreSSor fLuId 205L drum* Pfco32drXPurItY fG 32 comPreSSor fLuId 20L PaIL Pfco32P20

PURITY FG 46 COMPRESSOR FlUID PFCO46 PurItY fG 46 comPreSSor fLuId 205L drum* Pfco46drX PurItY fG 46 comPreSSor fLuId 20L PaIL Pfco46P20



PURITY FG SYNTHETIC 46 FlUID PFSYNCOPurItY fG SYntHetIc 46 fLuId 55 GaLLon drum PfSYncodruPurItY fG SYntHetIc 46 fLuId 5 GaLLon PaIL PfSYncoP5u

PURITY FG SYNTHETIC 100 FlUID PFSY100PurItY fG SYntHetIc 100 fLuId 55 GaLLon drum PfSY100druPurItY fG SYntHetIc 100 fLuId 5 GaLLon PaIL PfSY100P5u

PURITY FG SEAMER-E FlUID PFSEPurItY fG Seamer-e fLuId 205L drum* PfSedrX

PURITY FG AEROSOl SPRAYS PurItY fG SPraY 12X290G aeroSoL canS Pfmfa12PurItY fG PenetratInG oIL SPraY 12X355mL aeroSoL canS PfPoB12 PurItY fG SILIcone SPraY 12X355mL aeroSoL canS PfSIB12 PurItY fG2 WItH mIcroL maX 12X355mL aeroSoL canS PfGmIcmB12

PURITY FG TROllEY FlUID 46 PFTR46PurItY fG troLLeY fLuId 46 205L drum* Pftr46drXPurItY fG troLLeY fLuId 46 20L PaIL Pftr46P20

PURITY FG WO WHITE MINERAl OIl 10 PFWO10PurItY fG Wo WHIte mIneraL oIL 10 BuLK PfWo10BLKPurItY fG Wo WHIte mIneraL oIL 10 IBc PfWo10IBcPurItY fG Wo WHIte mIneraL oIL 10 205L drum* PfWo10drXPurItY fG Wo WHIte mIneraL oIL 10 20L PaIL PfWo10P20

PURITY FG WO WHITE MINERAl OIl 15 PFWO15PurItY fG Wo WHIte mIneraL oIL 15 BuLK PfWo15BLKPurItY fG Wo WHIte mIneraL oIL 15 IBc PfWo15IBc PurItY fG Wo WHIte mIneraL oIL 15 205L drum* PfWo15drXPurItY fG Wo WHIte mIneraL oIL 15 20L PaIL PfWo15P20

PURITY FG WO WHITE MINERAl OIl 35 PFWO35 PurItY fG Wo WHIte mIneraL oIL 35 BuLK PfWo35BLKPurItY fG Wo WHIte mIneraL oIL 35 IBc PfWo35IBc PurItY fG Wo WHIte mIneraL oIL 35 205L drum* PfWo35drXPurItY fG Wo WHIte mIneraL oIL 35 20L PaIL PfWo35P20

PURITY FG WO WHITE MINERAl OIl 40 PFWO40PurItY fG Wo WHIte mIneraL oIL 40 BuLK PfWo40BLKPurItY fG Wo WHIte mIneraL oIL 40 IBc PfWo40IBcPurItY fG Wo WHIte mIneraL oIL 40 205L drum* PfWo40drXPurItY fG Wo WHIte mIneraL oIL 40 20L PaIL PfWo40P20

PURITY FG WO WHITE MINERAl OIl 68 PFGWO68PurItY fG Wo WHIte mIneraL oIL 68 BuLK PfWo68BLKPurItY fG Wo WHIte mIneraL oIL 68 IBc PfWo68IBcPurItY fG Wo WHIte mIneraL oIL 68 205L drum* PfWo68drXPurItY fG Wo WHIte mIneraL oIL 68 20L PaIL PfWo68P20

PURITY FG WO WHITE MINERAl OIl 90 PFWO90PurItY fG Wo WHIte mIneraL oIL 90 IBc PfWo90IBc PurItY fG Wo WHIte mIneraL oIL 90 205L drum* PfWo90drX PurItY fG Wo WHIte mIneraL oIL 90 20L PaIL PfWo90P20

PURITY FG HEAT TRANSFER FlUID PFHTF PurItY fG Heat tranSfer fLuId IBc PfHtfIBc PurItY fG Heat tranSfer fLuId 205L drum* PfHtfdrX PurItY fG Heat tranSfer fLuId 20L PaIL PfHtfP20*also available in export drums

ElECTRICAl INSUlATING FlUIDS PAGE 41 NAME PArT NuMbErS

lUMINOl TR lUMTR LumInoL tr BuLK LumtrBLK LumInoL tr 205L drum* LumtrdrX

lUMINOl TRi lUMTRI LumInoL tri BuLK LumtrIBLKLumInoL tri 1040L IBc LumtrIIBcLumInoL tri 205L drum* LumtrIdrm*also available in export drums

WAY lUBRICANTS & MISCEllANEOUS FlUIDS PAGE 42-43 NAME PArT NuMbErS

MACHINE TOOl AND WAY lUBRICANTS

ACCUFlO Tk 68 ACFlk68 accufLo tK 68 BuLK acfLK68BLK accufLo tK 68 205L drum acfLK68drm accufLo tK 68 20L PaIL acfLK68P20

ACCUFlO Tk 220 ACFlk22 accufLo tK 220 0557-30XH 1100L cuBe acfLK22cuS accufLo tK 220 205L drum acfLK22drm accufLo tK 220 20L PaIL acfLK22P20

ACCUFlO SS 68 ACFSS68 accufLo SS 68 BuLK acfSS68BLK accufLo SS 68 drum acfSS68drm

PC WAYlUBE 68 PCWAY68 Pc WaYLuBe 68 BuLK PcWaY68BLK Pc WaYLuBe 68 205L drum PcWaY68drm

ROCk DRIll lUBRICANTS

ARDEE 32 RDE32 ardee 32 LuBrIcant 205L drum* rde32drmardee 32 LuBrIcant 20L PaIL rde32P20

ARDEE 46 RDE46 ardee 46 LuBrIcant 205L drum* rde46drmardee 46 LuBrIcant 20L PaIL rde46P20

ARDEE 68 RDE68 ardee 68 LuBrIcant 205L drum* rde68drm ardee 68 LuBrIcant 20L PaIL rde68P20

ARDEE 100 RDE100 ardee 100 LuBrIcant 4X4L caSe rde100c16 ardee 100 LuBrIcant 205L drum* rde100drm ardee 100 LuBrIcant 20L PaIL rde100P20

ARDEE 150 RDE150 ardee 150 LuBrIcant 4X4L caSe rde150c16 ardee 150 LuBrIcant 205L drum* rde150drm ardee 150 LuBrIcant 20L PaIL rde150P20

ARDEE 220 RDE220 ardee 220 LuBrIcant 205L drum* rde220drm ardee 220 LuBrIcant 20L PaIL rde220P20

CONCRETE FORM OIlS

CON-REl-EZE 40 FORM OIlS CRE40con-reL-eZe 40 form oIL 205L drum cre40drm

CON-REl-EZE 60 FORM OIlS CRE60con-reL-eZe 60 form oIL BuLK cre60BLKcon-reL-eZe 60 form oIL 205L drum cre60drm

SYSTEM AND EQUIPMENT ClEANING

PETRO-CANADA FlUSHING FlUID FlUSHF fLuSHInG fLuId BuLK fLuSHfBLK fLuSHInG fLuId 205L drum fLuSHfdrm fLuSHInG fLuId 5 uSG PaIL fLuSHfP5r

PETRO-CANADA ClEANING FlUID ClEANFl Pc cLeanInG fLuId BuLK cLeanfLBLK Pc cLeanInG fLuId 205L drum cLeanfLdrm

PC COMPRESSOR ClEANER CClEANR Pc comPreSSor cLeaner 205L drum ccLeanrdrm Pc comPreSSor cLeaner 20L PaIL ccLeanrP20

MISCEllANEOUS

ROTARY COOkER FlUID RTCF150 rotarY cooKer fLuId 205L drum rtcf150drm

SUPER VAC FlUID 15 SVF15SuPer Vac fLuId 15 205L drum** SVf15drm SuPer Vac fLuId 15 20L PaIL SVf15P20

SUPER VAC FlUID 19 SVF19SuPer Vac fLuId 19 205L drum** SVf19drm SuPer Vac fLuId 19 20L PaIL SVf19P20 SuPer Vac fLuId 19 BuLK SVf19BLK

SUPER VAC FlUID 20 SVF20SuPer Vac fLuId 20 205L drum** SVf20drm SuPer Vac fLuId 20 20L PaIL SVf20P20 SuPer Vac fLuId 20 BuLK SVf20BLK*also available in decant drums **also available in export drums

50

Start Pure. Finish Strong.

Petro-Canada’s PURITY base oils are key to the performance of our products. They

are manufactured using the HT Purity Process, resulting in crystal-clear base oils

that are 99.9% pure - some of the purest in the world. By removing the impurities

that hinder the performance of competitive conventional lubricants, we ensure our

products retain their “fresh oil” properties longer.

We blend this exceptional base oil with specialty additives so our products go further

for longer life, greater equipment protection and smoother performance. That

means you finish strong with more up-time, greater equipment productivity, lower

maintenance costs and performance that goes beyond your competitors’ standards.

Petro-canada’s 99.9% pure base oils.clearly, the lubricant you buy should start with this.

“Petro-Canada will repair damaged equipment, or replace damaged equipment parts resulting from a failure due to defects of the Petro-Canada lubricant, as long as the lubricant is used in accordance with your equipment manufacturer’s and our recommendations.”

To reach a Customer Service Representative, please call:

canada (english) .................... Phone 1-800-268-5850

(French) ..................... Phone 1-800-576-1686

united States ......................... Phone 1-877-730-2369

Latin america ......................... Phone +1-416-730-2369

europe ................................... Phone +1-416-730-2389

asia ....................................... Phone +1-416-730-2372

china ....................................... Phone +86 (21) 6362-0066

You can also e-mail us at [email protected]

To know more about how Petro-Canada lubricants, specialty fluids, oils and greases can help maximize your equipment performance, savings and productivity, please contact us at:

North america......................... Phone 1-866-335-3369

europe.................................... Phone +44 (0) 121-781-7264

germany ................................. Phone +49 (0) 201-726-2913

Latin america ......................... Phone +1-416-730-2369

asia ....................................... Phone +1-416-730-2372

china ....................................... Phone +86 (21) 6362-0066

e-mail ...................................... [email protected]

visit us on the web at lubricants.petro-canada.ca

Date Published: January 2013

Petro-Canada is a Suncor Energy business™ Trademark of Suncor Energy Inc. Used under licence.

Lub

2097e

(2013.0

1)

It’s more than just a Warranty. It’s a commitment.

our no-nonsense Lubricants Warranty

PC Product Catalogue Eng

Documents

right lubricant

brand of lubricant products

global petrocanada lubricants

right product choice

competitive products

tackified products

unique product

efficient products