120 130 140 150 160 161 175 Progressing Cavity Pumping Systems weatherford.com © 2011 Weatherford. All rights reserved Weatherford products and services are subject to the Company’s standard terms and conditions, available on request or at weatherford.com. For more information contact an authorized Weatherford representative. Unless noted otherwise, trademarks and service marks herein are the property of Weatherford. Specifications are subject to change without notice. Weatherford sells its products and services in accordance with the terms and conditions set forth in the applicable contract between Weatherford and the client. 278 SLIM 238 STD 238 SLIM 278 STD 278 LRG 312 STD FATBOY Tubing Size 412 STD m³/day/100rpm bbl/day/100rpm 238 SLIM • 2-3/8 in. Tubing • 2-1/4 in. Stator Tube OD • 4-1/2 in. Casing • 2-7/8 in. Insertable 238 STD • 2-3/8 Tubing • 3 in. Stator Tube OD • 4-1/2 in. Casing • 3-1/2 in. Insertable 238 LRG • 2-3/8 in. Tubing • 3-1/2 in. Stator Tube OD • 4-1/2 in. Casing • 4-1/2 in. Insertable 278 SLIM • 2-7/8 in. Tubing • 3-1/2 in. Stator Tube OD • 4-1/2 in. Casing • 4-1/2 in. Insertable 278 STD • 2-7/8 in. Tubing • 3-3/4 in. Stator Tube OD • 5-1/2 in. Casing • 4-1/2 in. Insertable 278 LRG •2-7/8 in. Tubing •4 in. to 4-1/2 in. Stator Tube OD •5-1/2 in. Casing •5-1/2 in. Insertable 312 STD • 3-1/2 in. Tubing • 4-1/2 in. to 5 in Stator Tube OD • 5-1/2 in. to 7 in. Casing • 5-1/2 in. Insertable 412 STD • 4-1/2 in. Tubing • 5-1/2 in. to 6 in. Stator Tube OD • 7 in. to 7-5/8 in. Casing FATBOY • Maximum flow area • Short pitch • Sandy heavy oil Rotor and Stator OD may vary depending on connections and configurations required 238 LRG Available Model Displacement Model Families Coil Accessibility 2-7/8 2-7/8 2-7/8 2-7/8 3-1/2 3-1/2 3-1/2 3-1/2 2-7/8 3-1/2 3-1/2 3-1/2 3-1/2 3-1/2 4-1/2 4-1/2 3-1/2 3-1/2 4-1/2 3-1/2 4-1/2 4-1/2 4-1/2 4-1/2 4-1/2 4-1/2 4-1/2 4-1/2 4-1/2 4-1/2 4-1/2 4-1/2 4-1/2 5-1/2 4-1/2 4-1/2 5-1/2 5-1/2 4-1/2 2-7/8 2-7/8 3-1/2 4-1/2 3-1/2 3-1/2 4-1/2 4-1/2 2-7/8 Coil Accessibility • 3/4 in. coil tubing • Minimum tubing size 1 4 4 6 7 8 10 10 10 11 13 14 15 15 16 17 18 22 23 27 28 30 32 35 42 47 50 52 56 60 64 70 80 83 88 95 98 105 106 113 6 24 25 38 45 50 60 60 60 69 82 88 95 95 100 110 113 140 145 170 175 189 200 220 265 296 310 327 350 377 400 440 500 520 550 600 615 660 667 710 200 205 1290 1100 1258 1010 1000 954 880 820 750 3-1/2 Coil accessibility based on 2-3/8 in. EUE 4.70 lb/ft, 2-7/8 in. EUE 6.50 lb/ft, 3- 1/2 in. EUE 9.30 lb/ft, 4-1/2 in. EUE 12.75 lb/ft, 5-1/2 in. LTC 17.00 lb/ft production tubing ID, nominal 0.750 in. OD coiled tubing, nominal rotor drift, and minimum 0.06 in. clearance to directly above the stator elastomer.