PC 910 Installation and Configuration Quick Start En

Informatica (Version 9.1.0)

PowerCenter Installation andConfiguration Quick Start

Informatica PowerCenter Installation and Configuration Quick Start

Version 9.1.0March 2011

Copyright (c) 1998-2011 Informatica. All rights reserved.

This software and documentation contain proprietary information of Informatica Corporation and are provided under a license agreement containing restrictions on use anddisclosure and are also protected by copyright law. Reverse engineering of the software is prohibited. No part of this document may be reproduced or transmitted in any form,by any means (electronic, photocopying, recording or otherwise) without prior consent of Informatica Corporation. This Software may be protected by U.S. and/or internationalPatents and other Patents Pending.

Use, duplication, or disclosure of the Software by the U.S. Government is subject to the restrictions set forth in the applicable software license agreement and as provided inDFARS 227.7202-1(a) and 227.7702-3(a) (1995), DFARS 252.227-7013 © (1)(ii) (OCT 1988), FAR 12.212(a) (1995), FAR 52.227-19, or FAR 52.227-14 (ALT III), asapplicable.

The information in this product or documentation is subject to change without notice. If you find any problems in this product or documentation, please report them to us inwriting.

Informatica, Informatica Platform, Informatica Data Services, PowerCenter, PowerCenterRT, PowerCenter Connect, PowerCenter Data Analyzer, PowerExchange,PowerMart, Metadata Manager, Informatica Data Quality, Informatica Data Explorer, Informatica B2B Data Transformation, Informatica B2B Data Exchange Informatica OnDemand, Informatica Identity Resolution, Informatica Application Information Lifecycle Management, Informatica Complex Event Processing, Ultra Messaging and InformaticaMaster Data Management are trademarks or registered trademarks of Informatica Corporation in the United States and in jurisdictions throughout the world. All other companyand product names may be trade names or trademarks of their respective owners.

Portions of this software and/or documentation are subject to copyright held by third parties, including without limitation: Copyright DataDirect Technologies. All rightsreserved. Copyright © Sun Microsystems. All rights reserved. Copyright © RSA Security Inc. All Rights Reserved. Copyright © Ordinal Technology Corp. All rightsreserved.Copyright © Aandacht c.v. All rights reserved. Copyright Genivia, Inc. All rights reserved. Copyright Isomorphic Software. All rights reserved. Copyright © MetaIntegration Technology, Inc. All rights reserved. Copyright © Intalio. All rights reserved. Copyright © Oracle. All rights reserved. Copyright © Adobe Systems Incorporated. Allrights reserved. Copyright © DataArt, Inc. All rights reserved. Copyright © ComponentSource. All rights reserved. Copyright © Microsoft Corporation. All rights reserved.Copyright © Rogue Wave Software, Inc. All rights reserved. Copyright © Teradata Corporation. All rights reserved. Copyright © Yahoo! Inc. All rights reserved. Copyright ©Glyph & Cog, LLC. All rights reserved. Copyright © Thinkmap, Inc. All rights reserved. Copyright © Clearpace Software Limited. All rights reserved. Copyright © InformationBuilders, Inc. All rights reserved. Copyright © OSS Nokalva, Inc. All rights reserved. Copyright Edifecs, Inc. All rights reserved. Copyright Cleo Communications, Inc. All rightsreserved. Copyright © International Organization for Standardization 1986. All rights reserved. Copyright © ej-technologies GmbH . All rights reserved. Copyright © JaspersoftCorporation. All rights reserved.

This product includes software developed by the Apache Software Foundation (http://www.apache.org/), and other software which is licensed under the Apache License,Version 2.0 (the "License"). You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0. Unless required by applicable law or agreed to in writing,software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See theLicense for the specific language governing permissions and limitations under the License.

This product includes software which was developed by Mozilla (http://www.mozilla.org/), software copyright The JBoss Group, LLC, all rights reserved; software copyright ©1999-2006 by Bruno Lowagie and Paulo Soares and other software which is licensed under the GNU Lesser General Public License Agreement, which may be found at http://www.gnu.org/licenses/lgpl.html. The materials are provided free of charge by Informatica, "as-is", without warranty of any kind, either express or implied, including but notlimited to the implied warranties of merchantability and fitness for a particular purpose.

The product includes ACE(TM) and TAO(TM) software copyrighted by Douglas C. Schmidt and his research group at Washington University, University of California, Irvine,and Vanderbilt University, Copyright ( © ) 1993-2006, all rights reserved.

This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (copyright The OpenSSL Project. All Rights Reserved) and redistribution ofthis software is subject to terms available at http://www.openssl.org and http://www.openssl.org/source/license.html.

This product includes Curl software which is Copyright 1996-2007, Daniel Stenberg, <[email protected]>. All Rights Reserved. Permissions and limitations regarding thissoftware are subject to terms available at http://curl.haxx.se/docs/copyright.html. Permission to use, copy, modify, and distribute this software for any purpose with or withoutfee is hereby granted, provided that the above copyright notice and this permission notice appear in all copies.

The product includes software copyright 2001-2005 ( © ) MetaStuff, Ltd. All Rights Reserved. Permissions and limitations regarding this software are subject to terms availableat http://www.dom4j.org/ license.html.

The product includes software copyright © 2004-2007, The Dojo Foundation. All Rights Reserved. Permissions and limitations regarding this software are subject to termsavailable at http://dojotoolkit.org/license.

This product includes ICU software which is copyright International Business Machines Corporation and others. All rights reserved. Permissions and limitations regarding thissoftware are subject to terms available at http://source.icu-project.org/repos/icu/icu/trunk/license.html .

This product includes software copyright © 1996-2006 Per Bothner. All rights reserved. Your right to use such materials is set forth in the license which may be found at http://www.gnu.org/software/ kawa/Software-License.html.

This product includes OSSP UUID software which is Copyright © 2002 Ralf S. Engelschall, Copyright © 2002 The OSSP Project Copyright © 2002 Cable & WirelessDeutschland. Permissions and limitations regarding this software are subject to terms available at http://www.opensource.org/licenses/mit-license.php .

This product includes software developed by Boost (http://www.boost.org/) or under the Boost software license. Permissions and limitations regarding this software are subjectto terms available at http:/ /www.boost.org/LICENSE_1_0.txt. This product includes software copyright © 1997-2007 University of Cambridge. Permissions and limitationsregarding this software are subject to terms available at http://www.pcre.org/license.txt.

This product includes software copyright © 2007 The Eclipse Foundation. All Rights Reserved. Permissions and limitations regarding this software are subject to termsavailable at http://www.eclipse.org/org/documents/epl-v10.php.

This product includes software licensed under the terms at http://www.tcl.tk/software/tcltk/license.html, http://www.bosrup.com/web/overlib/?License, http://www.stlport.org/doc/ license.html, http://www.asm.ow2.org/license.html, http://www.cryptix.org/LICENSE.TXT, http://hsqldb.org/web/hsqlLicense.html, http://httpunit.sourceforge.net/doc/license.html, http://jung.sourceforge.net/license.txt, http://www.gzip.org/zlib/zlib_license.html, http://www.openldap.org/software/release/license.html, http://www.libssh2.org,http://slf4j.org/license.html, http://www.sente.ch/software/OpenSourceLicense.html, http://fusesource.com/downloads/license-agreements/fuse-message-broker-v-5-3- license-agreement; http://antlr.org/license.html; http://aopalliance.sourceforge.net/; http://www.bouncycastle.org/licence.html; http://www.jgraph.com/jgraphdownload.html; http://www.jcraft.com/jsch/LICENSE.txt. http://jotm.objectweb.org/bsd_license.html; http://www.w3.org/Consortium/Legal/2002/copyright-software-20021231; http://www.slf4j.org/license.html; http://developer.apple.com/library/mac/#samplecode/HelpHook/Listings/HelpHook_java.html; http://www.jcraft.com/jsch/LICENSE.txt;http://nanoxml.sourceforge.net/orig/copyright.html; http://www.json.org/license.html; and http://forge.ow2.org/projects/javaservice/.

This product includes software licensed under the Academic Free License (http://www.opensource.org/licenses/afl-3.0.php), the Common Development and DistributionLicense (http://www.opensource.org/licenses/cddl1.php) the Common Public License (http://www.opensource.org/licenses/cpl1.0.php), the Sun Binary Code LicenseAgreement Supplemental License Terms, the BSD License (http://www.opensource.org/licenses/bsd-license.php) and the MIT License (http://www.opensource.org/licenses/mit-license.php).

This product includes software copyright © 2003-2006 Joe WaInes, 2006-2007 XStream Committers. All rights reserved. Permissions and limitations regarding this softwareare subject to terms available at http://xstream.codehaus.org/license.html. This product includes software developed by the Indiana University Extreme! Lab. For furtherinformation please visit http://www.extreme.indiana.edu/.

This Software is protected by U.S. Patent Numbers 5,794,246; 6,014,670; 6,016,501; 6,029,178; 6,032,158; 6,035,307; 6,044,374; 6,092,086; 6,208,990; 6,339,775;6,640,226; 6,789,096; 6,820,077; 6,823,373; 6,850,947; 6,895,471; 7,117,215; 7,162,643; 7,254,590; 7,281,001; 7,421,458; 7,496,588; 7,523,121; 7,584,422, 7,720,842;7,721,270; and 7,774,791 , international Patents and other Patents Pending.

DISCLAIMER: Informatica Corporation provides this documentation "as is" without warranty of any kind, either express or implied, including, but not limited to, the impliedwarranties of oninfringement, merchantability, or use for a particular purpose. Informatica Corporation does not warrant that this software or documentation is error free. Theinformation provided in this software or documentation may include technical inaccuracies or typographical errors. The information in this software and documentation issubject to change at any time without notice.

NOTICES

This Informatica product (the "Software") includes certain drivers (the "DataDirect Drivers") from DataDirect Technologies, an operating company of Progress SoftwareCorporation ("DataDirect") which are subject to the following terms and conditions:

1.THE DATADIRECT DRIVERS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOTLIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.

2. IN NO EVENT WILL DATADIRECT OR ITS THIRD PARTY SUPPLIERS BE LIABLE TO THE END-USER CUSTOMER FOR ANY DIRECT, INDIRECT,INCIDENTAL, SPECIAL, CONSEQUENTIAL OR OTHER DAMAGES ARISING OUT OF THE USE OF THE ODBC DRIVERS, WHETHER OR NOT INFORMED OFTHE POSSIBILITIES OF DAMAGES IN ADVANCE. THESE LIMITATIONS APPLY TO ALL CAUSES OF ACTION, INCLUDING, WITHOUT LIMITATION, BREACHOF CONTRACT, BREACH OF WARRANTY, NEGLIGENCE, STRICT LIABILITY, MISREPRESENTATION AND OTHER TORTS.

Part Number: IN-ICQ-91000-0001

Table of Contents

Chapter 1: PowerCenter Installation and Configuration Quick Start . . . . . . . . . . . . . . . . 1Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Verify the System Requirements for Informatica Services and Clients. . . . . . . . . . . . . . . . . . . . . . . . 2

Minimum System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Minimum Database Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Temporary Disk Space Requirement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Complete the Pre-Installation Tasks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Install the Informatica Services. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Install the Informatica Clients. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Complete the Post-Installation Tasks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Install Optional Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Table of Contents i

ii Table of Contents

C H A P T E R 1

PowerCenter Installation andConfiguration Quick Start

This chapter includes the following topics:

¨ Overview, 1

¨ Verify the System Requirements for Informatica Services and Clients, 2

¨ Complete the Pre-Installation Tasks, 4

¨ Install the Informatica Services, 5

¨ Install the Informatica Clients, 5

¨ Complete the Post-Installation Tasks, 5

¨ Install Optional Components, 6

OverviewThe Informatica platform includes the following products:

¨ Informatica Data Explorer

¨ Informatica Data Quality

¨ Informatica Data Services

¨ PowerCenter

Installation Steps1. Verify the system requirements for Informatica services and clients.

2. Complete the pre-installation tasks.

3. Install the Informatica services.

4. Install the Informatica clients.

5. Complete the post-installation tasks.

6. Install drivers, additional utilities, and product documentation.

Note: The pre-installation and post-installation tasks differ based on the product you install.

If you install more than one Informatica product, complete the Informatica platform steps one time, and thencomplete the steps for each product that you install.

This quick start includes general installation steps. For detailed instructions, such as steps required for certainplatforms, databases, or features, see the Informatica PowerCenter Installation and Configuration Guide.

1

Verify the System Requirements for InformaticaServices and Clients

Run the Informatica 9 Pre-Installation System Check tool (i9Pi) to verify that the machines where you install theInformatica services and clients meet the system and diskspace requirements. If required, modify the machinesettings before you start the installation.

After you download and extract the installation files, you can find the i9Pi tool in the following directory:<InstallerExtractDirectory>/i9Pi

Minimum System RequirementsThe following table describes the minimum system requirements for the Informatica clients and for a domain withdifferent node configurations:

Component Processor RAM DiskSpace

Operating System

Domain with all Data Quality, DataExplorer, Data Services, andPowerCenter services running on onenode

4 CPU 8 GB 20 GB WindowsSun SolarisHP-UXIBM AIXRed Hat LinuxSUSE Linux

Domain with Data Quality, DataExplorer, and Data Services applicationservices running on one node:- Data Integration Service- Model Repository Service- Analyst Service

2 CPU 4 GB 20 GB

Domain with all PowerCenter servicesrunning on one node

2 CPU 4 GB 4 GB

Domain with all PowerCenter servicesrunning on one node except MetadataManager Service and Reporting Service

1 CPU 2 GB 3 GB

Metadata Manager Service running ona separate node

2 CPU 2 GB 3 GB

Reporting Service running on aseparate node

1 CPU 512 MB 3 GB

PowerCenter Client 1 CPU 512 MB 1.2 GB Windows

Informatica Developer 1 CPU 512 MB 900 MB Windows

Metadata Manager Agent 1 CPU 512 MB 220 MB Windows

Minimum Database RequirementsThe database requirements for the Informatica repositories and components differ based on the product you installand the services you plan to create. Create each repository in a separate database schema.

2 Chapter 1: PowerCenter Installation and Configuration Quick Start

Informatica Platform Database RequirementsWhen you create an Informatica domain, you must create a domain configuration repository. If you install multipleproducts that run on the same domain, you need a single domain configuration repository.

Informatica Component Database Type DiskSpace

Comments

Informatica domainconfiguration repository

IBM DB2 UDBMicrosoft SQL ServerOracle

200 MB Set up the database schema before you startthe installation process.

PowerCenter Database RequirementsPowerCenter requires a PowerCenter repository. If you create a Reporting Service or a Metadata ManagerService, create a repository for each service. If you use the PowerCenter data profiling option, create a DataProfiling warehouse.

Informatica Component Database Type DiskSpace

Comments

PowerCenter repository IBM DB2 UDBMicrosoft SQL ServerOracle

35 MB Set up the database before you create thePowerCenter Repository Service. Allocatemore space based on the amount of metadatathat you want to store.

PowerCenter Data profilingwarehouse

IBM DB2 UDBMicrosoft SQL ServerOracle

256 MB Set up the database before you create thePowerCenter Repository Service.Allocate more space based on the followingfactors:- The amount of data that you intend to

profile.- Mode you run profile sessions: verbose or

normal.- Types of tables: full or sampling.- Frequency that you purge the Data

Profiling warehouse.

Data Analyzer repository IBM DB2 UDBMicrosoft SQL ServerOracle

60 MB Set up the database before you create theReporting Service.

Metadata Manager repository IBM DB2 UDBMicrosoft SQL ServerOracle

1 GB Set up the database before you create theMetadata Manager Service.

Temporary Disk Space RequirementThe following table describes the temporary disk space requirements during installation:

Product Operating System Disk Space

Installer Windows or UNIX 1 GB

Informatica Services UNIX 2 GB

Verify the System Requirements for Informatica Services and Clients 3

Product Operating System Disk Space

Windows 605 MB

Informatica Clients Windows 550 MB

Complete the Pre-Installation TasksBefore you install the Informatica services or clients, prepare the machines where you plan to install Informaticaservices and clients. If you install multiple products, complete the pre-installation tasks only once.

Complete the following pre-installation tasks:

1. Verify the license key.Before you install the software, verify that you have the license key for the product you plan to install. ContactInformatica Global Customer Support if you do not have a license key or if you have an incremental licensekey and you want to create a domain.

2. Uninstall the previous version of Data Transformation, if applicable.Back up essential files before you uninstall Data Transformation.

3. Review the environment variables.Configure the environment variables to work with the Informatica installation.

4. Determine the ports available for Informatica.The installer sets up the ports for components in the Informatica domain. It also designates the ports to usefor application service processes that run on the node where you install Informatica.

¨ Domain port. Default is 6005.

¨ Service Manager port. Default is 6006.

¨ Service Manager shutdown port. Default is 6008.

¨ Informatica Administrator port. Default is 6007.

¨ Informatica Administrator shutdown port. Default is 6009.

¨ Range of ports for application services. Default range is 6013 to 6113.

5. Create a system user account to install Informatica.Create a system user account to perform the installation and to run the Informatica service or daemon. Verifythat the user account you use to install Informatica has write permission on the installation directory.

6. Optionally, set up a keystore file for a secure connection.To use a secure connection between the Administrator tool and the Service Manager, set up a keystore foruse with Informatica.

7. For UNIX and Linux, verify the file descriptor settings.Verify that the operating system meets the file descriptor requirement.

8. For UNIX, set up the X Window server for graphical mode installation.The Informatica installer requires a graphics display server to run in graphical mode.

9. For IBM AIX, verify that POSIX Asynchronous I/O is available for the PowerCenter Integration Service.

10. Set up the database and user account for the domain configuration repository.Verify the database requirements before you set up the database. The requirements differ based on the typeof database you use for the domain configuration repository.

11. Verify the minimum system requirements for PowerCenter Client.

4 Chapter 1: PowerCenter Installation and Configuration Quick Start

12. Verify that the third-party software is installed for PowerCenter Client.PowerCenter Client requires third-party software to perform certain operations. Verify that the machine whereyou install PowerCenter Client has the required software.

Install the Informatica ServicesUse the Informatica server installer to install the Informatica services on a Windows or UNIX machine. You caninstall the Informatica services on multiple machines to create multiple nodes.

Install the Informatica ClientsUse the Informatica client installer to install the Informatica clients on Windows.

If you install multiple products, you can install the following client applications on the same machine or separatemachines:

¨ Informatica Developer for use with Data Explorer, Data Services, and Data Quality.

¨ PowerCenter Client for use with PowerCenter.

Complete the Post-Installation TasksAfter you install the Informatica product, complete the configuration tasks to ensure that the Informatica servicesand clients run properly. If you install multiple products, complete the post-installation tasks only once.

Complete the following post-installation tasks:

1. Configure the environment variables.Configure the environment variables that Informatica uses when it runs the application services and connectsto the clients.

2. Update statistics for the domain configuration repository if it runs on IBM DB2 9.1.For gateway nodes that run on UNIX, verify that a graphics display server is available.

3. Configure the web browser.You can use Microsoft Internet Explorer or Mozilla Firefox to launch the web client applications in theInformatica platform. Configure to the browser to work with the Informatica web clients.

4. Install languages for the Informatica client tools.To view languages other than the system locale when you work with repositories that use a UTF-8 code page,install additional languages on Windows for use with the Informatica clients.

5. Verify the setup for 32-bit and 64-bit platforms.You can run Informatica on 32-bit or 64-bit platforms. When you run Informatica on both 32-bit and 64-bitplatforms, configure Informatica to use the correct libraries, database clients, and session cache sizes.

6. Install the database client software on each machine where the PowerCenter Integration Service andPowerCenter Repository Service run.

Install the Informatica Services 5

7. Install the database client software on each machine where the PowerCenter Integration Service andPowerCenter Repository Service run.

8. Verify third-party software requirements.Informatica requires third-party software and libraries to perform certain operations. Verify that the machinewhere you install Informatica has the required software or library.

9. Verify code page compatibility.Informatica requires the code pages for application services to be compatible with code pages in the domain.The locale settings on machines that access the Informatica client tools or the Administrator tool must also becompatible with the code pages of in the domain.

Install Optional ComponentsOptionally, you can install the following components:

¨ Informatica utilities

¨ Product documentation

6 Chapter 1: PowerCenter Installation and Configuration Quick Start