Pay Cost to Use Www.gps228.Com Software User Manual

Before track online, make sure device set SMS as below:TK102B/TK06A/TK100 SMS commands as below:

1. #IP#123456#58.64.200.27#8169#, reply : set IP port OK2. #apn#123456#APN of operator#APN user name #APN password#, reply:set APN

OK

TK103/TK106 SMS commands as below:

(1)ip58.64.200.27port8169(2)apn123456+space+APN of operator(3)user+ space+ APN user name+ space+ APN password（if no APN user name and

prd, skip this step）(4)number40025085044（40025085044  latter 11 digits of device IMEI ）

1. Login www.gps228.com

2. 【Add Secondary Group】 : “vehicle manager” →“vehicle and group management” →”add secondary user group” →fill in group name→finish(Note: please choose “add secondary group” under your account, don’t choose”add group”)

How to create account for customer ?

Step 1

Create Secondary Group

Step 2

Create User

Step 3

Grouping User to Group

Step 4

Add vehicle

3. 【Create User】 (please use same name as Group ) : “vehicle manager” →“user management” →”add user” →fill in user name→finish, as below:

4. 【Grouping】 : go to “user management” →choose user(it will turn blue if choosed)→choose group→choose function of user→Save

5. 【Add vehicle】: “vehicle manager” →“vehicle and group management” →”add vehicle ” →fill in info as below:

TK06A/TK102/TK100 terminal ID: use 15 IMEI digits; protocol type is : keep same as default(no need choose)

TK103/TK106 terminal ID: use 0+ latter 11digits of IMEI; protocol type is : ASC

6.【How to move vehicle from Group A to Group B ? 】

7.【How to track your car】:1) Open vehicle list→choose one car (gray means offline,

blue means online )

2) Choose map or Satellite for better checking

At the buttom of screen pull out the hidden real time data as below:

8.【How to check history data ? 】Choose “report center” →“history data report” →”choose time period ” →click “download”

9.【How to check history replay ? 】1) Choose one car in vehicle list

2) Put mouse on the choosed car, and click right →choose “track replay” as below :

10. 【How to set Geo-fence ? 】1) Choose “terminal setting” →“set geo-fence” as below:

2) Choose shape of Geo-fence:

3) Move the shape on map as below→ choose save icon as below: