314 FEATURES Haz TECHNICAL SPECIFICATIONS HOUSING Cast copper free aluminum. GUARD Optional cast copper free aluminum. HARDWARE Stainless steel. ENTRIES Stem/pendant type - one 3 ⁄4” NPT. Ceiling/surface type - one 1 ⁄2” NPT, up to 3 ⁄4” NPT four way available. See ENTRY OPTIONS for selections. GASKETS One piece silicone. MOUNTING Ceiling/surface or stem/pendant type. LAMP HOLDER Medium base, high temperature PBT. Nickel plated copper screw shell. LAMP TYPE A-19 100w vertical filament, provided. LENS Tempered green fresnel glass. VOLTAGE Rated to 250v. TERMINAL BLOCK Optional 4 pole terminal block. Not available on stem/pendant models. TEMPERATURE CODES HazHelideck 1158D2/1159D2/al CAP 437 compliant. • Steady burn marker. • High temperature silicone gaskets provide a watertight seal. • Watertight mounting in any direction. • Heat and impact resistant glass fresnel lens. • Protective guard available. • STANDARDS UL 844 - Hazardous Locations • UL 1598 - Luminaires • Complies with CAP 437 • APPLICATIONS CAP 437 requirements • Obstruction marking • Heli-pad marking • Hazardous locations • Ceiling/surface and stem/pendant mount types • Marine and watertight requirements • Oil and gas exploration and production • APPROVALS Class I Division 2 Groups A, B, C & D • Class I Zone 2 Groups IIA, IIB, IIB + H2 and IIC • Type 4X • Conforms to IP66 • ABS • Lens Color Lamp Size Temp Code at 40ºC Stem Surface GRN A-19 100w VF T2 T2C
4
Embed
Pauluhn 1158/1159 Hazardous Area Helideck Beacon catalog page · • Hazardous locations • Ceiling/surface and stem/pendant mount types • Marine and watertight requirements •
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
314
FEATURES
Haz
TECHNICAL SPECIFICATIONS
HOUSING Cast copper free aluminum.
GUARD Optional cast copper free aluminum.
HARDWARE Stainless steel.
ENTRIES Stem/pendant type - one 3⁄4” NPT. Ceiling/surface type - one 1⁄2” NPT, up to 3⁄4” NPT four way available. See ENTRY OPTIONS for selections.
GASKETS One piece silicone.
MOUNTING Ceiling/surface or stem/pendant type.
LAMP HOLDER Medium base, high temperature PBT. Nickel plated copper screw shell.
LAMP TYPE A-19 100w vertical filament, provided.
LENS Tempered green fresnel glass.
VOLTAGE Rated to 250v.
TERMINAL BLOCK Optional 4 pole terminal block. Not available on stem/pendant models.
TEMPERATURE CODES
HazHelideck 1158D2/1159D2/al
CAP 437 compliant. •Steady burn marker.•High temperature silicone gaskets provide a watertight seal.•Watertight mounting in any direction.•Heat and impact resistant glass fresnel lens.•Protective guard available.•
STANDARDSUL 844 - Hazardous Locations•UL 1598 - Luminaires•Complies with CAP 437•
APPLICATIONS CAP 437 requirements•Obstruction marking•Heli-pad marking•Hazardous locations•Ceiling/surface and stem/pendant mount types•Marine and watertight requirements•Oil and gas exploration and production•
APPROVALSClass I Division 2 Groups A, B, C & D•Class I Zone 2 Groups IIA, IIB, IIB + H2 and IIC•Type 4X•Conforms to IP66•ABS•
Lens Color Lamp Size Temp Code at 40ºC
Stem Surface
GRN A-19 100w VF T2 T2C
P A U L U H N H A Z H E L I D E k 1 1 5 8 D 2 / 1 1 5 9 D 2 A L
Hel
idec
k Li
ghti
ng
315
INX4000 LAMP HOLDER, Standard PBT
CX3070 TERMINAL BLOCk 4 Pole
GkT1143 GASkET SET
INX1004A GUARD
INX2058G-FS LENS (5” Overall Length)
INX3737 LAMP A-19 100w VF
SPARE PARTS
T - 4 Pole Terminal Block (Ceiling/Surface models)GRD - Guard
SPEC IAL OPT IONS
PART NUMBER MOUNT WEIGHT LBS*
1158AGRND27 Stem/Pendant 3.6
1159AGRND27 Ceiling/Surface 3.6
*Add .3 lbs for guard.
Part No. Description
ENTRY OPT IONS
1159D2 Ce i l i ng /Sur face Mode ls
NPT Trade Size
Dead End
Thru Feed
90 Degree
X-Positions
1/2” Std. C1 L1 X1
3/4” E2 C2 L2 X2
Dimensions in inches
ORDER ING REFERENCES
D IMENS IONS
312
FEATURES
Haz
CAP 437 compliant. •Steady burn marker.•High temperature silicone gaskets provide a watertight seal.•Watertight mounting in any direction.•Heat and impact resistant glass fresnel lens.•Protective guard available.•
HazHelideck 1158D2/1159D2/br
APPROVALSClass I Division 2 Groups A, B, C & D•Class I Zone 2 Groups IIA, IIB, IIB + H2 and IIC•Type 4X•Conforms to IP66•ABS•
APPLICATIONS CAP 437 requirements•Obstruction marking•Heli-pad marking•Hazardous locations•Ceiling/surface and stem/pendant mount types•Marine and watertight requirements•Oil and gas exploration and production•
STANDARDSUL 844 - Hazardous Locations•UL 1598 - Luminaires•Complies with CAP 437•
TECHNICAL SPECIFICATIONS
HOUSING Cast marine brass.
GUARD Optional cast marine brass.
HARDWARE Stainless steel.
ENTRIES Stem/pendant type - one 3⁄4” NPT. Ceiling/surface type - one 1⁄2” NPT, up to 3⁄4” NPT four way available. See ENTRY OPTIONS for selections.
GASKETS One piece silicone.
MOUNTING Ceiling/surface or stem/pendant type.
LAMP HOLDER Medium base, high temperature PBT. Nickel plated copper screw shell.
LAMP TYPE A-19 100w vertical filament, provided.
LENS Tempered green fresnel glass.
VOLTAGE Rated to 250v.
TERMINAL BLOCK Optional 4 pole terminal block. Not available on stem/pendant models.
TEMPERATURE CODES
Lens Color Lamp Size Temp Code at 40ºC
Stem Surface
GRN A-19 100w VF T2 T2C
P A U L U H N H A Z H E L I D E k 1 1 5 8 D 2 / 1 1 5 9 D 2 / B R
Hel
idec
k Li
ghti
ng
313
D IMENS IONS
Dimensions in inches
INX4000 LAMP HOLDER, Standard PBT
CX3070 TERMINAL BLOCk 4 Pole
GkT1143 GASkET SET
INX1004B GUARD
INX2058G-FS LENS (5” Overall Length)
INX3737 LAMP A-19 100w VF
SPARE PARTS
T - 4 Pole Terminal Block (Ceiling/Surface models)GRD - Guard