PAT-TRAP, INC. CHOICE OF THE ATA ● 632 Western Avenue ● Henniker, New Hampshire 03242 ● Phone (603) 428 -3396 ● www.pattrap.com ● Page 1 More registered targets are thrown from Pat-Traps than from any other automatic trap machine! Four Case Turret (540 Targets). Switch from “Singles” to “Doubles” in Seconds and vice versa. Operates from standard 115VAC, 15 Amp, 60 Hz. Power Source. Electronically operated solenoid release for “Instant response”. 3/4 H.P. Direct Drive Hydraulic Pump that uses 5W20 oil.. High Quality “Soft-Shift” Hydraulic Valves for Smooth Operation of Wobble and Oscillation Cylinders. Vibration Free. Sealed Ball Bearings. Side-Loading Turret Available. Base Dimensions 30” Wide by 21.5” Deep. Height Requirements 41” (Minimum) - 43” (Preferred) from pedestal to ceiling inside trap house. Use with manual Pull Cord or Accepts Most Voice or Wireless Releases. No Gear Boxes to break down or complex electronics that overheat. No More Target Guide Springs to create target dust for cleaner operation. “G” Series Electronics are simpler than “SW” Series for improved reliability. Most Consistent Target Presentation. Made in The USA. US Patents Numbers 5249563 and 6176229 One Year Parts and Labor Warranty Fully Automatic Pat-Trap ® Wobble Singles/Doubles Trap Machine PAT TRAP WOBBLE SPECIFICATION SHEET
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
PAT-TRAP, INC. CHOICE OF THE ATA ● 632 Western Avenue ● Henniker, New Hampshire 03242 ● Phone (603) 428-3396 ● www.pattrap.com ●
Page 1
More registered targets are thrown from Pat-Traps than from any other automatic trap machine!
Four Case Turret (540 Targets).
Switch from “Singles” to “Doubles” in Seconds and vice versa.
Operates from standard 115VAC, 15 Amp, 60 Hz. Power Source.
Electronically operated solenoid release for “Instant response”.
3/4 H.P. Direct Drive Hydraulic Pump that uses 5W20 oil..
High Quality “Soft-Shift” Hydraulic Valves for Smooth Operation of Wobble and Oscillation
Cylinders.
Vibration Free.
Sealed Ball Bearings.
Side-Loading Turret Available.
Base Dimensions 30” Wide by 21.5” Deep.
Height Requirements 41” (Minimum) - 43” (Preferred) from pedestal to ceiling inside trap house.
Use with manual Pull Cord or Accepts Most Voice or Wireless Releases.
No Gear Boxes to break down or complex electronics that overheat.
No More Target Guide Springs to create target dust for cleaner operation.
“G” Series Electronics are simpler than “SW” Series for improved reliability.
Most Consistent Target Presentation.
Made in The USA.
US Patents Numbers 5249563 and 6176229
One Year Parts and Labor Warranty
Fully Automatic Pat-Trap® Wobble Singles/Doubles Trap Machine
PAT TRAP WOBBLE SPECIFICATION SHEET
PAT-TRAP, INC. CHOICE OF THE ATA ● 632 Western Avenue ● Henniker, New Hampshire 03242 ● Phone (603) 428-3396 ● www.pattrap.com ●
Page 2
Rugged Throw Arm for Consistent Targets
New “XXX” Finger for Improved “Doubles”
Maintenance Free Elevated Rollers
All Hydraulic Operation - Wobble Trap
Easily Set Field Angles with Sealed Switches
Main Shaft Clutch Assembly Eliminates Vibration
Maintenance Free Cam Operated Target Elevator
3/4 HP Farm Duty Motor and Direct Drive Pump
PAT TRAP WOBBLE SPECIFICATION SHEET
Related Documents
![Wobble 2.0 - User Guide - v1.0[1]](https://static.cupdf.com/doc/110x72/577cc1821a28aba711933641/wobble-20-user-guide-v101.jpg)
