Garmat ® USA provides parts jamming booths to meet your shops’ small parts requirements. Parts jamming booths are designed for priming or finish painting. They recycle the filtered air back into the shop environment. Garmat ® USA Parts Jamming Tunnels are constructed of e.g. steel with durable powdercoated finish on facia and ceiling panels. Both units are equipped with a reverse incline fan, 5 HP motor, 3 phase. Complete electrical controls include motor starter and on-off switch. Two stages of filtration are provided. Efficient air flow of 9,000 CFM. PARTS JAMMING BOOTHS 10811 Single Wall Panel Construction One 5 HP Motor 8 – T8 Fluorescent Tube Overhead Light Fixtures 8’3” wide 10812 Single Wall Panel Construction One 5 HP Motor 16 – T8 Fluorescent Tube Overhead Light Fixtures 11’ 5 3 /4” wide 1401 W. Stanford Ave. Englewood, CO 80110 Phone: 800-442-7628 Fax: 303-781-2683 www.garmat.com BUILT IN THE USA Garmat ® USA reserves the right to modify or change any of the technical features mentioned in this brochure. © 2002 Garmat ® USA MODEL 10811 MODEL 10812