PARTS, EQUIPMENT AND SUPPLIES › product › ...w.harcosu ply.com 675 The Parkway Peterborough, ON K9J 7K2 1-800-361-5361 705-743-5361 Fax: 705-743-4312 [email protected] Parts, Equipment,

www.harcosupply.com

675 The ParkwayPeterborough, ON

K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]

Parts, Equipment, and Supplies Distribution Center Stay Connected.

Since 1964

PARTS, EQUIPMENT AND SUPPLIES

Including a complete line of our COLOUR-CODED products


K9J 7K21-800-361-5361

705-743-5361Fax: 705-743-4312

[email protected]

Turn to HARCO for all your equipment & supply needs . . .

TABLE OF CONTENTS PageAlfa-Laval/Tetra . . . . . 1-3, 5-9, 12, 13

Ampco Pumps . . . . . . . . . . . . . 4, 8-10

Contherm . . . . . . . . . . . . . . . . . . . . . 2

Gaskets . . . . . . . . . . . . . . . . . . . 19, 20

G&H Products - Valves . . . . . . . . . 18

Plate Heat Exchangers . . . . . . . . . . 1 Plug & Stems . . . . . . . . . . . . . . . . . 17

Pumps . . . . . . . . . . . . . . . . . . . . . 3 - 11LKH Centrifugal Series Pumps . . . . . . . . . 3

C Series Pumps . . . . . . . . . . . . . . . . . . . . . . 4

SRU1-3 Pumps . . . . . . . . . . . . . . . . . . . . . . . 5

SRU4 & Up Pumps. . . . . . . . . . . . . . . . . . 6, 7

PD Pumps . . . . . . . . . . . . . . . . . . . . . . . . 8, 9

LC/LD/LF Series Pumps . . . . . . . . . . . . . . 10

APV Puma Pumps & Seals . . . . . . . . . . . . 11

Reconditioning Service - for Heat Exchangers & Regasketing . . . . . 1 Sanitary Lubricants . . . . . . . . . 22, 23

Separators . . . . . . . . . . . . . . . . . . . . 2

Strahman . . . . . . . . . . . . . . . . . . . . 21

Tri Clover . . . . . . . . . . . . . . . . . . 14-17

Valves . . . . . . . . . . . . . . . . . . . . . 12-18SRC Shut-Off Valve . . . . . . . . . . . . . . . . . . 12

SRC Divert Valve . . . . . . . . . . . . . . . . . . . . 13

761/761 TR Shut-Off Valve . . . . . . . . . . . . . 14

761/761 TR Divert Valve . . . . . . . . . . . . . . . 15

361/361 TR Shut-Off Valve . . . . . . . . . . . . . 16

361/361 TR Divert Valve . . . . . . . . . . . . . . . 17

G&H Products - Valves . . . . . . . . . . . . . . . 17

COLOUR CODED SECTION . . . . . 24

Brooms . . . . . . . . . . . . . . . . . . . . . . 26

Brushes . . . . . . . . . . . . . . . . . . . 27-32

Brush Racks . . . . . . . . . . . . . . . . . . 36

Containers and Lids . . . . . . . . 37, 38

Cutting Boards . . . . . . . . . . . . . . . . 33

Cutlery . . . . . . . . . . . . . . . . . . . . . . 33

Dustpans . . . . . . . . . . . . . . . . . . . . 27

Colour Clamp Gaskets . . . . . . . . . 40

Hand Pads . . . . . . . . . . . . . . . . . . . 33

Handles . . . . . . . . . . . . . . . . . . . . . . 25

Mops . . . . . . . . . . . . . . . . . . . . . . . . 25

Mop Bucket & Wringer . . . . . . . . . 26

Paddle Scrappers . . . . . . . . . . . . . 34

Pails . . . . . . . . . . . . . . . . . . . . . . 37-39

Scoops . . . . . . . . . . . . . . . . . . . . . . 34

Scrapers . . . . . . . . . . . . . . . . . . 34, 35

Shovels . . . . . . . . . . . . . . . . . . . . . . 35

Squeegees . . . . . . . . . . . . . . . . . . . 27

Tilt Truck . . . . . . . . . . . . . . . . . . . . . 40

Parts & Supplies Distribution CenterAuthorized Distributor For . . .

Thermometers & Gauges

CFIA Approved Lubricants

SANITARYLUBRICATING

SPRAY

LUBRIFIANTSANITAIRE

EN AEROSOL

SANITARYLUBRICATING

SPRAY

LUBRIFIANTSANITAIRE

EN AEROSOL

USP grade liquid petrolatumGelée de pétrole liquide de grade USP

312 g

Product Code HL-7

MADE IN CANADA/ FABRIQUE AU CANADA

Color Coded Products

Ampco ZP Series

Pumps

Gaskets

Sanitary & Stainless Steel Utensils

pg. 1

pg. 21

pg. 8

pg. 12-17

pg. 19

pg. 24

pg. 22

pg. 5


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]

1-800-361-5361 • www.harcosupply.com

1

Supply

Tetra Pak gives you access to a wide range of compact plate heat exchangers that are especially designed for pasteurizing and other kinds of heating and cooling of liquid foods. No matter which you select, you will acquire a proven, reliable, hygienic and compact design that will carry out it’s tasks effectively and without problems for many years to come.

Plate Heat Exchangers - Alfa Laval / Tetra PakFor Sanitary, Industrial, HVAC and Process Applications

Authorized Tetra Pak Distribution Centre.

When Ordering Parts Please Supply Us The Model And Serial Numbers.

Tetra PakAPV

TranterSwepVicarbSondex

GEA

SchmidtAGC

ArsopiBarriquand

Bell & GossettCetetherm

CIATCorblinDMS

DonghwaFiroini

Fischer Eurocal

FunkeHisaka

ITTKAPP

Krashin ENGMueller

PasilacPolarisReheat

SkilleborgStork

Thermaline

RECONDITIONING SERVICEFor Heat Exchangers and Regasketing For All Makes

Harco provides full service reconditioning and technical support on ANY Manufacturer’s plate heat exchangers.

Qualities Gasket typeClip

End plate gasket II(or pieces of Channel plate gasket)

Channel plate gasketEnd plate gasket I

Connection gasket

Part # Description

39005608 27 CLIP 6 NBRFF clip-on peak, channel

39005609 27 CLIP 6 NBRFF clip-on peak. end II


39005609 27 CLIP 6 NBRFF clip-on peak, end II

39005608 26 CLIP 6 EPDMFF clip-on peak, channel

39005609 26 CLIP 6 EPDMFF clip-on peak, end II




Part # Description


39005610 26 CLIP 8 EPDMFF clip-on, peak, channel

39005611 26 CLIP 8 EPDMFF clip-on peak, end 11

39005612 27 CLIP10 NBRFF clip-on peak, channel

39005613 27 CLIP10 NBRFF clip-on peak, end II

39005612 27 CLIP10 NBRFF clip-on peak, channel

39005613 27 CLIP10 NBRFF clip-on peak, end II

39005612 26 CLIP10 EPDMFF clip-on peak, channel

39005613 26 CLIP10 EPDMFF clip-on peak, end II

Part # Description

39005614 27 M6-M NBRFF clip-on peak, channel


39005614 26 M6-M EPDMFF clip-on peak, channel






Replacement Heat Exchangers and Parts Available For Most Competitive Plate Heat Exchangers.


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


2

Supply

Energy-efficient models with high quality standards for a wide spectrum of applications. An advanced inlet and outlet design ensures gentle treatment during the entire separation process.

SeparatorsFor Every Duty

• Milk clarification

• Hot milk separation

• Cold milk separation

• Whey clarification

• Whey cream separation

• USDA accepted whey clarifier

• Anhydrous milk fat

• Buttermilk separation

Parts available for all models for Westfalia and Alfa Laval machines.


ConthermScraped Surface Heat Exchanger

The Contherm scraped-surface heat exchangers are designed for heating and cooling operations in the continuous and semi-continuous processing of many food, health and beauty aid products.

Contherm is a vertically mounted, scraped-surface heat exchanger, a design that has proven to be the most effective in providing a comprehensive range of benefits. Saving valuable floor space, maximizing product recovery and optimizing cleaning-in-place (CIP) and reducing the risk of contamination.


When Ordering Parts Please Supply Us The Model And Serial Numbers.


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


3

Supply

LKH Series Centrifugal Pumps - SanitaryParts List

Pos. Qty Denomination1 1 Motor

2 1 Shroud

2a 1 Edge list

3 4 Screw

5a 1 Compression ring with thread

5b 1 Compression ring without thread

6 6 Screw

6a 6 Washer

7 1 Shaft

8 1 Connex pin

9 1 Retaining ring (only LKH-10)

10 1 Drive ring

11 1 Stationary seal ring

12 1 O-ring

13 1 Spring

14 1 Rotating seal ring

2 Rotating seal ring

15 1 O-ring

2 O-ring

16 1 Adaptor

17 4 Screw for adaptor

18 4 Nut for adaptor

19 4 Washer for adaptor

20 2 Nut

21 2 Washer

22 1 Safety guard

23 1 Screw for safety guard

24 6 Cap nut

24a 6 Washer

25 1 Back plate

26 1 O-ring

27 1 Impeller

28 6 Bolt

29 1 Pump casing

30a 1 Support bar, right

30b 1 Support bar, left

31 4 Leg

32 4 Screw

33 4 Nut

34 4 Spring washer

35 4 Screw

35a 4 Washer

36 1 Impeller screw

37 1 Impeller for impeller screw

38 1 O-ring

39 4 Nut

40 1 Seal housing

40a 1 Seal housing

41 2 Screw for seal housing

42 2 Tube

43 1 Lip seal

44 1 O-ring for seal housing

45 1 O-ring for drive ring

50 1 O-ring

51 1 Sec. stationary seal ring

52 1 Drive ring

57 1 Inducer

When Ordering Parts Please Supply Us The Model And Serial Numbers Of Pump.


Designed for either CIP or manual cleaning, these quiet pumps are available with capacities up to 1,300 gal/min and/or pressures up to 525 head in feet of water (227 psi). All product contact parts – backplate, casing, impeller and the impeller retaining bolt – are made of AISI 316L stainless steel. Polished models are USDA approved and exceed 3A standards so you can be sure you have got the most hygienic centrifugal pump possible.


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


4

Supply

All C Series PumpsAlfa Laval, Tri Clover, Ampco, Q Pumps, Waukesha

Parts List

KEY DESCRIPTION QTY1 Casing 1

2 Impeller 1

6A Set Screw (Shaft) 4

6D Universal Stub Shaft-Threaded 1

6E Universal Stub Shaft-STD 1

11 Backplate 1

11B Backplate 1

11F Backplate Pin 2

11H Backplate (DG) 1

17 Follower 1

17A Machine Screw 4

17B O-ring 1

17C Lockwasher 4

17J SS Gland Ring (DG) 1

17K Bolt/Screw (DG) 4

17M Lockwasher (DG) 4**

24 Retainer (Impeller) 1

24A Castellated Nut (Impeller) 1

24B Cotter Pin (Impeller) 1

40 Deflector 1

71 Adapter 1

71A Adapter Pin 2

71B Adapter Mounting Screw 4

71C Adapter Plate (See note this page) 1

71D Adapter Mounting Screw(Used only with #71C above)

4

75 Clamp Assembly Complete 1

80 Carbon Seal 1 or 2*

80A Cup 1

80B O-ring (Seal) 1 or 2*

80C Spring 1

80G Cup 2

80H Spring 1

80J Drive Collar 1

80K Set Screw 2

80L Drive Collar 1

80M Set Screw-Drive Collar 2

80N Seal Seat (DG) 1

80P PTFE Gaskets (DG) 1 or 2**

80R PTFE Gaskets (DG) 1**

83C Stuffing Box 1

83D Machine Screw 4

83E O-ring 1

90 Casing Gasket 1

127 Water Inlet Assembly 1

127A Lock Nut 1

131 Seal Guard Assembly 1

133 Washer (Impeller) 1

207 Adjustable Leg 4

209 Adjustable Leg Bracket 2

209A Set Screw (Square Hd.) 4

209B Bracket Mounting Screw 4

209C Washer (Leg Assembly) 4


The C series of centrifugal pumps have been designed for a wide range of applications where stainless steel product wetted components are essential to maintain hygienic processing standards.

Floating Retainer withType D or F External Balanced Seals

Additional Type “DG” Clamped-in Seal SeatComponents (For use with type D seal)

Floating Retainer with Type E Water CooledBalanced Double Seal

Threaded Shaft and Castellated Nut RetainerSystem for Use with Type D, F or E Seals


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


5

Supply

SRU1-3 PumpsAlfa Laval

Parts List

Pos. Denomination1 Gearcase

2 Dowel

3 Stud, rotorcase retention

4 Nut, rotorcase retention

4A Washer, rotorcase retention

5 Cover, gearcase

6 Screw, gearcase cover

7 Lip seal, drive end

8 Shim

8A Shim retainer

8B Shim retainer screws

9 Rotorcase

10 Stud, rotorcase/cover retention

11 O-Ring, cover

12 Cover, rotorcase

13 Dome nut, rotorcase cover

14 Retainer, seal

15 Screw, seal retainer

16 Lip seal, gland end

17 Rotors

18 O-Ring, rotor sealing shaft end

20 O-Ring, rotor sealing nut end

22 Nut, rotor retention

23 Key

24 Shaft, drive

25 Shaft, auxiliary

26 Bearing, rear

27 Spacer, shaft abutment

30 Nut, bearing

31 Bearing, front

32 Spacer, bearing

36 Timing gear

38 Torque locking element

39 Clamp plate

40 Screw, clamp plate

45 Drain plug

46 Sight glass

47 Filler plug

48 Plug

49 Blanking plug

50 Gland guard

51 Screw, gland guard

52 Washer, gland guard

53 Washer, gland guard

54 Foot, vertical port

56 Foot, horizontal port

58 Bolt, Foot


The SRU range of rotary lobe pumps has been designed for use on wide ranging applications within the Brewing, Dairy, Food, Pharmaceutical and Chemical industries.

The SRU range is compact in size and highly efficient, capable of flow rates up to 466 gpm and pressures up to 290 psi. The new improved modular design provides for greater application flexibility and cost effective easy maintenance.


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


6

Supply

SRU4 & Up Pumps - Horizontally PortedAlfa Laval

Parts List

Pos. Denomination

1 Gearcase

2 Dowel




5 Cover, gearcase



8 Shim

8A Shim retainer


9 Rotorcase


11 O-Ring, cover

12 Cover, rotorcase


14 Retainer, seal



17 Rotors




23 Key

24 Shaft, drive

25 Shaft, auxiliary

26 Bearing, rear


28 Spacer, bearing drive end

29 Spacer, bearing gland end

30 Nut, bearing

31 Bearing, front

32 Spacer, bearing

34 Nut, bearing front

36 Timing gear

37 Torque locking assembly

45 Drain plug

46 Sight glass

47 Filler plug





K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


7

Supply

SRU4 & Up Pumps - Vertically PortedAlfa Laval

Parts List

Pos. Denomination

1 Gearcase

2 Dowel




5 Cover, gearcase



8 Shim

8A Shim retainer


9 Rotorcase


11 O-Ring, cover

12 Cover, rotorcase


14 Retainer, seal



17 Rotors




23 Key

24 Shaft, drive

25 Shaft, auxiliary

26 Bearing, rear


28 Spacer, bearing drive end

29 Spacer, bearing gland end

30 Nut, bearing

31 Bearing, front

32 Spacer, bearing

34 Nut, bearing front

36 Timing gear

37 Torque locking assembly

45 Drain plug

46 Sight glass

47 Filler plug





K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


8

Supply

PD Pumps - Universal I Type - 006, 015, 018, 24, 030, 034, 045, 060, 064, 130, 134, 220, 224 and 320

Alfa Laval, Ampco, Waukesha, Wright

Parts ListPOS DENOMINATION

1 Capscrew, Gear Case Cover, SS

1a Washer GC Cover Capscrew, SS

2 Oil Seal - Gear Case Cover

3 Oil Level, Drain Plug, SS

4 Gear Case Cover (includes installed seal)

5 Lock Nut - Gear

6 Lock Washer - Gear

7 Gear Drive Shaft

8 Gear Short Shaft

9 Key, Gear

10 Gear Case, CI

Gear Case, SS

11 Oil Seal Rear

12 Grease Fitting 1/8

Grease Fitting 1/8, SS

13 Mounting Shim (Gear Case Base)

14 Capscrew, Gear Case Base, SS

15 Stud

16 Dowel Busing Lower

17 Dowel Bushing, Upper

18 Spacer Gear to Rear Bearing

19 Rear Bearing

20 Spacer Bearing

21 Shim Kit

22 Front Bearing

23 Drive Shaft (17-4PH)

24 Auxiliary Shaft (17-4PH)

25 Drive Pin

26 Bearing Retainer Front

27 Grease Seal Front Brg Ret

28 Button Head Cap Screw, Bearing Retainer, SS

29 Stop Pin Seal

30 Dowel Pin, Upper Gear Case Side

31 Dowel Pin,Lower Gear Case Side

32 Rotorcase - 1.1/2” Triclamp

Rotorcase - 2” Triclamp

Rotorcase - Rect / 2” Triclamp

Rotorcase for Flush - 1.1/2” Triclamp

Rotorcase for Flush - 2” Triclamp

Rotorcase for Flush - Rect / 2” Triclamp

33 Rectangular Flange O Ring, 034 - NBR

34 Dowel Pin, Lower Cover Side

35 Dowel Pin, Upper Cover Side

37 Rotorcase Retaining Screw

38 Rotor Twin Blade, Non-Galling Alloy

Single Blade Rotor, Non-Galling Alloy


The Universal I range of positive displacement pumps have been designed for use on a wide range of applications within:

Dairy, Food, Beverage, and Personal Care markets. The highly efficient design is particularly suited to applications that are low in viscosity with medium to high discharge pressures.

Performance• Capacity Range: 0.1 to 310 gpm (0.02 to 70.4 m3/hr)

• Pressure Range: up to 500 psi/ 34 Bar

• Temperature Range: -40°F to +300°F (-40°C to +150°C) Note: Hot clearances required for high temp operation

• Viscosity Range: 28 to 910,000 SSU (1 to 200,000 cSt) Note: Consult factory for application greater than 910,000 SSU/200,000 cSt

• Chocolate clearances available

Stainless Steel Gear Cases on Ampco Pumps.


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


9

Supply

PD Pumps - Universal II Type - 006, 015, 018, 24, 030, 034, 045, 060, 064, 130, 134, 180, 220 and 210

Alfa Laval, Ampco, Waukesha, Wright

Parts List

POS DENOMINATION

1 Capscrew, Gear Case Cover, SS

1a Washer GC Cover Capscrew, SS

2 Oil Seal - Gear Case Cover

3 Oil Level, Drain Plug, SS

4 Gear Case Cover (includes installed seal)

5 Lock Nut - Gear

6 Lock Washer - Gear

7 Gear Drive Shaft

8 Gear Short Shaft

9 Key, Gear

10 Gear Case

11 Oil Seal Rear

12 Grease Fitting 1/8

13 Mounting Shim (Gear Case Base)

14 Capscrew, Gear Case Base, SS

15 Stud

16 Dowel Busing, Lower

17 Dowel Bushing, Upper

18 Spacer Gear to Rear Bearing

19 Rear Bearing

20 Spacer Bearing

21 Shim Kit

22 Front Bearing

23 Drive Shaft (17-4PH)

24 Auxiliary Shaft (17-4PH)

25 Rotor Key

26 Bearing Retainer Front

27 Grease Seal Front Brg Ret

28 Button Head Cap Screw, Bearing Retainer, SS

29 Stop Pin, Seal

30 Dowel Pin, Upper Gear Case Side

31 Dowel Pin,Lower Gear Case Side

32 Rotorcase - 1.1/2” Triclamp

Rotorcase - 2” Triclamp

Rotorcase - Rect / 2” Triclamp

Rotorcase for Flush - 1.1/2” Triclamp

Rotorcase for Flush - 2” Triclamp

Rotorcase for Flush - Rect / 2” Triclamp

33 Rectangular Flange O Ring - NBR

34 Dowel Pin, Lower Cover Side

35 Dowel Pin, Upper Cover Side

36 Rotor Hub O Ring

37 Rotorcase Retaining Screw

38 Rotor Twin Blade, Non-Galling Alloy

39 Rotor Nut O Ring

The Universal II range of positive displacement pumps have been designed for use on a wide range of applications within:

Dairy, Food, Beverage, Pharma and Personal Care markets. The highly efficient design is particularly suited to applications that are low in viscosity with medium to high discharge pressures.

Performance• Capacity Range: 0.1 to 310 gpm (0.02 to 70.4 m3/hr)

• Pressure Range: up to 500 psi/ 34 Bar

• Temperature Range: -40°F to +300°F (-40°C to +150°C) Note: Hot clearances required for high temp operation

• Viscosity Range: 28 to 910,000 SSU (1 to 200,000 cSt) Note: Consult factory for application greater than 910,000 SSU/200,000 cSt

• Chocolate clearances available


Stainless Steel Gear Cases on Ampco Pumps.


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


10

Supply

LC/LD/LF Series PumpsAmpco, Fristam

Parts List - Single Internal Mechanical SealThe LC/LD/LF Series Pumps are a high efficiency design and performance offers gentle product handling capability up to 1200 cps.

Heavy-wall construction, tight manufacturing tolerances, dynamically balanced impellers and a self-aligning shaft minimize vibration and promote longer seal life.

Standard adapters are made of 304 SS to resist corrosion.

Ampco Series Competing Fristam Series

LC FPX

LD FP

LF FPR


POS QTY DESCRIPTION24B 1 Adapter tightening bolt

24A 1 Adapter nut

23 42 Cap screw (retaining ring)

22 1 Retaining ring

21 1 Shaft collar

20 X3 Star nut

19 1 Motor

17 4 Cap screw (motor/adapter)

161 2 Drive screw

151 1 Name plate

13B 1 Double mechanical seal (for LD)

13A 1 Single mechanical seal (for LC)

12 1 Impeller key

11B 1 Shaft guard cap screw

11A 1 Shaft guard

9 1 Gasket (impeller screw)

8 1 O-ring (casing/cover)

6 1 Impeller screw

5 1 Stub shaft

4 1 Adapter

3 1 Impeller

2 1 Cover

1 1 Casing1Not shown2(6) Socket head set screws for 250 frame3Star nut quantity varies with pump model

Single Internal Mechanical Seal

POS DESCRIPTION1 Stationary o-ring

2 Stationary seal

3 Flat gasket

4 Rotating seal

5 Rotating o-ring

6 Seal washer

7 Spring

8Inside seal driver o-ring(May be pre-installed)

9 Seal driver

10 Outsied seal driver o-ring

11 Seal washer

12* Rotating seal

13* Rotating o-ring

14* Seal washer

15* Spring

16* Seal driver

17* Seal screws (2)

Seal Breakdown For LC/LD Series Pumps (Items 12-17 for LD Series Pumps only)

Parts List

LC/LD/LF Pump at 3500 RPM LC/LD/LF Pump at 1750 RPM

STANDARD SEAL OPTIONSLC SINGLE SEALStandard Material:• Silicon carbide/Carbon/Vitom• Optional chrome oxide rotating element

LD SINGLE SEALStandard Material:• Silicon carbide/Carbon/Ceramic/Vitom• Optional chrome oxide rotating element

LF SINGLE SEALStandard Material:• Silicon carbide/Carbon/Vitom• Optional double seal


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


11

Supply

APV Puma Pumps V & VIParts List

ITEM DESCRIPTION1 Main supporting frame and cradle

2 Setscrews far above frame, Hex. hd.

3 Nameplate

4 Pin, Rd.hd. No. 4, for above

5 Extension frame for unshrouded motors

6 Shaft, stub

7 Screw, cap, socket head

8 Safety guard, stub shaft

9 Backplate

10 Joint, body

11 Impellar

12 Clamping collar assembly

12a Tommy bar for clamping collar

13 Ring, joint, RJT

14 Nut, impellar

15 Body, pump (Shrouded motors only)

16 Grubscrew 2BA, slot head

17 Foot, ball

18 Setscrew, 2BA, round head

19 Washer, plain, 1/4"

20 Bolt, hex. Head, 1/4" B.S.W.

21 Clip

22 Screw

23 Baffle plate and terminal box assembly, Earth cable, Grammet

24 Shroud, case assembly, Eyebolt, for unshrouded motors only

25 Motor, electric, 3 ph. 50 Hz.

26 Motor rails

27 Foot, ball, adjustable

28 Locknut, 5/8" BSF, hex.

29 Setscrew, 1/2" BSW x 1-3/5" lg., hex. head

30 Washer, plain, 1/2"

31 Body, pump

32 Nameplate


APV Puma Pumps V & VI - SealsParts List

ITEM DESCRIPTIONNON-WATER COOLED FLEXIBOX SEAL

1 Joint, seal face, gasket

2 Seal face

3 Joint, retaining ring, gasket

4 Seal assembly

5 “O” ring (packing ring)

6 Retaining ring

7 Setscrew, 5/16", B.S. hex. head

EXTRA ITEMS REQUIRED FOR WATER-COOLED SEAL

8 In place of item 6: Housing

9 Tube, polythene, 3/8" o.d. X 18" long

10 Hose clip

11 Adaptor, 3/8" o.d. to 1/8" B.S.P

12 Seal assembly


APVCREPACO, INC.

We also sell parts for Gaulin & Terta Pak Homogenizers.

Contact us today for more information. 1-800-361-5361 or 705-743-5361.

Or visit our website - www.harcosupply.com

Gaulin Homogenizers


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


12

Supply

SRC Shut-Off ValveAlfa Laval

Actuator Parts List

POS QTY DESCRIPTION

1 1 Cap

2 2 O-ring

3 1 Cylinder

3a 1 Air fitting

4 1 Lock Wire

5 1 O-ring

6 1 Piston

6a 1 Stop ring

7 1 O-ring

8 1 Bonnet

9 1 Exhaust plug

10 1 Spring assembly (standard black)

11a 1 Clip, complete (period 84.08-)

11b 1 Clip, (period 68.02 - 84.07)

POS QTY DESCRIPTION

Stem Seal

14 1 Lip seal

Clamp

15 1 Heavy duty clamp

Valve Body (industrial)

18 1 Valve body

Valve Body (polished)

18 1 Valve body

Valve Plug

19 1 Plug, single, complete

a 1 Stem

e 1 Seal ring

f 1 Washer

g 1 O-ring

h 1 Screw

POS QTY DESCRIPTION

Stem Seal

14 1 Lip seal kit

a 1 Leap seal

b 1 Plate

c 1 Seal ring

FEP Seal

14 d 1 Washer

e 1 O-ring FEP/Silicone

f 1 Holder

g 1 Valve body packing

Valve Parts List

Alternative for Stem Seal

When Ordering Parts Please Supply Us The Model And Serial Numbers Of Valve.

Service kits are available for all.

See our website for information available - www.harcosuppy.com

SRC is an air-operated seat valve with a sanitary and flexible design giving a wide field of application, e.g. as a stop valve with two or three ports or as divert valve with three to five ports.

The valve is remote-controlled by means of compressed air. It has few and simple moveable parts which results in a very reliable valve.

Valve body combinations


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


13

Supply

SRC Divert ValveAlfa Laval

Actuator Parts ListPOS QTY DESCRIPTION

1 1 Cap

2 2 O-ring

3 1 Cylinder

3a 1 Air fitting

4 1 Lock Wire

5 1 O-ring

6 1 Piston

7 1 O-ring

8 1 Bonnet

9 1 Exhaust plug

10 1 Spring assembly (standard black)

11a 1 Clip, complete (period 84.08-)

11b 1 Clip, (period 68.02 - 84.07)

POS QTY DESCRIPTIONStem Seal

14 1 Lip seal

Clamp

15 1 Heavy duty clamp

Valve Body (industrial)

16 1 Valve body, upper

17 1 Valve body seal ring

18 1 Valve body, lower

Valve Body (polished)

16 1 Valve body, upper

17 1 Valve body seal ring

18 1 Valve body, lower

Valve Plug

20 1 Plug, single, complete

b 1 Stem

c 1 Seal ring, upper

e 1 Seal ring, lower

f 1 Washer

g 1 O-ring

h 1 Screw

POS QTY DESCRIPTIONStem Seal

14 1 Lip seal kit

a 1 Leap seal

b 1 Plate

c 1 Seal ring

FEP Seal

14 d 1 Washer

e 1 O-ring FEP/Silicone

f 1 Holder

g 1 Valve body packing

Valve Parts List

Alternative for Stem Seal


Service kits are available for all.


SRC is an air-operated seat valve with a sanitary and flexible design giving a wide field of application, e.g. as a stop valve with two or three ports or as divert valve with three to five ports.




K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


14

Supply

761/761 TR Shut-Off Valve 10-30Tri Clover

Parts ListPOS QTY DESCRIPTION1L 1 10/20 Actuator, long

1L 1 30 Actuator, long

1M 1 Mid position actuator/short

1S 1 10/20 Actuator, short

1S 1 30 Actuator, short

1HPS 1 HP Actuator, short

1HPL 1 HP Actuator, long

2S 1 Stem protector, short

2A 1 Stem protector, long

2B 1 Stem protector, O-ring

2C 1 Stem protector, spacer

2L 1 Stem protector, long


3L 1 Yoke, long

3S 1 Yoke, short

4 2 Seal retainer

5 2 V-packing

5A 2 O-ring to replace V-packing

6 1 Packing retainer

7 1 End cap

8 1 Red caplug

9 1 Vent plug (not shown)

10 11 Lockwasher

11 7 Screw

12 4 Screw

13 1 O-ring stem, BUNA

13 1 O-ring stem, EPDM

13 1 O-ring stem, SFY

14 1 O-ring

15 2 O-ring

16 1 O-ring

17 1 Nylon lock pin

18 1 Body lower, 2 ports Tri Clamp

18 1 Body lower, 2 ports weld

19 1 Body lower, 3 ports Tri Clamp

19 1 Body lower, 3 ports weld

20 1 Body gasket, BUNA

20 1 Body gasket, EPDM

20 1 Body gasket, SFY

21 1 Clamp

22 1 Valve plug, BUNA

22 1 Valve plug, EPDM

22 1 Valve plug, SFY

22 1 LP valve plug, BUNA (U)

22 1 LP valve plug, EPDM (ESF)

22 1 LP valve, plug SFY

23 1 TR stem seat assembly

23 1 TR2 valve plug

24 1 TR snap-on seat

24 1 TR2 stem seat

25 1 Bonnet

26 1 Stem bushing

When Ordering Parts Please Supply Us The Model And Serial Numbers Of Valve.See our website for information available - www.harcosuppy.com

This air-operated seat valve features the positive action of either a short-stroke or long-stroke actuator. The 761/741 valve is ideal for high volume, sanitary liquid processing applications. Its heavy-duty construction and precision-molded bonnet gaskets ensure positive alignment under severe operating conditions.




K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


15

Supply

761/761 TR Divert Valve 21, 23, 41, 43Tri Clover

Parts ListPOS QTY DESCRIPTION1L 1 10/20 Actuator, long

1L 1 30 Actuator, long

1M 1 Mid position actuator/short

1S 1 10/20 Actuator, short

1S 1 30 Actuator, short

1HPS 1 HP Actuator, short

1HPL 1 HP Actuator, long


2A 1 Stem protector, long

2B 1 Stem protector, O-ring

2C 1 Stem protector, spacer

2L 1 Stem protector, long


3L 1 Yoke, long

3S 1 Yoke, short

4 2 Seal retainer

5 2 V-packing

5A 2 O-ring to replace V-packing

6 1 Packing retainer

7 1 End cap

8 1 Red caplug

9 1 Vent plug (not shown)

10 11 Lockwasher

11 7 Screw

12 4 Screw

13 1 O-ring stem, BUNA / EPDM / SFY

14 1 O-ring

15 2 O-ring

16 1 O-ring

17 1 Nylon lock pin

18 1 Body lower, 2 ports clamp/weld

19 1 Body lower, 3 ports clamp/weld

20 1 Body gasket, BUNA / EPDM / SFY

21 1 Clamp

27L 1 Stem, BUNA, long

27L 1 Stem, EPDM, long

27L 1 Stem, SFY, long

27S 1 Stem LP BUNA, short

27S 1 Stem LP EPDM, short

27S 1 Stem LP SFY, short

28L 1 TR stem, long

28L 1 TR2 stem, long

28S 1 TR stem, short

28S 1 TR2 stem, short

29U 1 TR seat, upper

29U 1 TR2 seat, upper

29L 1 TR seat, lower

29L 1 TR2 seat, lower

30 1 Body upper, 2 ports clamp

30 1 Body upper, 2 ports weld

31 1 Body upper, 3 ports clamp

31 1 Body upper, 3 ports weld

32 1 Stem bushing

33 1 Seal retaining washer

When Ordering Parts Please Supply Us The Model And Serial Numbers Of Valve.See our website for information available - www.harcosuppy.com

This air-operated seat valve features the positive action of either a short-stroke or long-stroke actuator. The 761/741 valve is ideal for high volume, sanitary liquid processing applications. Its heavy-duty construction and precision-molded bonnet gaskets ensure positive alignment under severe operating conditions.




K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


16

Supply

361/361 TR Shut-Off ValvesTri Clover

Parts ListPOS QTY DESCRIPTION

1 1 Lower body 2 ports clamp

1 1 Lower body 2 ports weld

3 1 Lower body 3 ports clamp

3 1 Lower body 3 ports weld

4 1 Valve plug BUNA

4 1 Valve plug EPDM

4 1 Valve plug SFY

4 1 LP valve plug BUNA

4 1 LP valve plug EPDM

4 1 LP valve plug SFY

4 1 TR valve plug

4B 1 TR stem seat

6 1 Body gasket BUNA

6 1 Body gasket EPDM

6 1 Body gasket SFY

7 1 Body clamp

10 1 Bonnet

11 1 O-ring stem BUNA

11 1 O-ring stem EPDM

11 1 O-ring stem SFY

12 1 Actuator clamp

13 1 Actuator type 10 N/O

13 1 Actuator type 20 N/C



This air-operated seat valve features the positive action of a short-stroke actuator. The 361 valve is ideal for high volume, sanitary liquid processing applications. It’s heavy-duty clamps and precision-molded bonnet gaskets ensure positive alignment under severe operating conditions.




K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


17

Supply

361/361 TR Divert ValvesTri Clover

Parts List

POS QTY DESCRIPTION

1 1 Lower tee body

2 1 Lower cross body

3 1 Valve stem BUNA

3 1 Valve stem EPDM

3 1 Valve stem SFY

3 1 Valve stem LP BUNA

3 1 Valve stem LP EPDM

3 1 Valve stem LP SFY

3 1 Valve stem TR

3A 1 TR stem seat

3B 1 TR stem seat

4 1 Body gasket BUNA

4 1 Body gasket EPDM

4 1 Body gasket SFY

5 1 Body clamp

6 1 Upper body 21 & 23

7 1 Upper body 41 & 43

8 1 O-ring stem BUNA

8 1 O-ring stem EPDM

8 1 O-ring stem SFY

9 1 Actuator clamp

10 1 Actuator type 10 N/O

10 1 Actuator type 20 N/C



This air-operated seat valve features the positive action of a short-stroke actuator. The 361 valve is ideal for high volume, sanitary liquid processing applications. It’s heavy-duty clamps and precision-molded bonnet gaskets ensure positive alignment under severe operating conditions.




K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


18

Supply

*PLUG & STEMS - Optional stems with replaceable seats for above

Double Plug & Stem

DESCRIPTION PART #

Double 1-1/2" 60RB-77-1.5-2

Double 2” 60RB-77-2-2

Double 2-1/2” 60RB-77-2.5-2

Double 3” 60RB-77-3-2

Single Plug & Stem

DESCRIPTION PART #

Single 1-1/2" 60RB-7-1.5-2

Single 2" 60RB-7-2-2

Single 2-1/2" 60RB-7-2.5-2

Single 3" 60RB-7-3-2

Rubber Seat - EDPM

DESCRIPTION PART #

31353-0320-1 1-1/2" Seat

31353-0321-1 2" Seat

31353-0322-1 2-1/2" Seat

31353-0324-1 3" Seat

DESCRIPTION PART #

881-14919 Stem O Ring

Rubber Seat

G&H PRODUCTS - Valvesfor G&H Products, SPI

TEE VALVEModel: W60-7-Size; 60-7-Size; GC60-7-SizeNOTE: All parts are interchangeable due to connection, bodies are listed separately.

PART NUMBER DESCRIPTION

W60-7-Size-1 Tee Body Weld

60-7-Size-1 Threaded Body

GC60-7-Size-1 GC Clamp Body

60-7-Size-3 Bonnet

60-7-Size-2 Plug & Stem*

60-7-902-9 Stem “0” Ring

60-7-1½-9 Clip

GH13Z (1½" Valve) has 2½" Clamp

GH13Z (2" Valve) has 3" Clamp



C40B (1½" Valve) has 2½" Gasket

C40B (2" Valve) has 3" Gasket

C408 (2½" Valve) has 3½" Gasket


GH13Z-2½" Bonnet clamp to Actuator all valves

DIVERT VALVEModel: W60-77-Size; 60-77-Size; GC60-77-SizeNOTE: All parts are interchangeable due to connection, bodies are listed separately.


W60-7-Size-1 Weld lower tee body

W60-77-Size-1 Weld upper tee body

60-7-Size-1 Threaded lower tee body

60-77-Size-1 Threaded upper tee body

GC60-7-Size-1 Clamp lower tee body

GC60-77-Size-1 Clamp upper tee body

60-77-Size-2 Plug & Stem*

60-7-1½-9 Clip

60-7-902-9 Stem “0” Ring










GH13Z-2½ Bonnet clamp to actuator all valves


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


19

Supply

APC (101H) Buna Part #

1" 101H-11.5 101H-1.52" 101H-22.5 101H-2.53" 101H-34" 101H-4

Clamp-Silicone Part #

1" 40MPX-11.5 40MPX-1.52" 40MPX-22.5 40MPX-2.53" 40MPX-34" 40MPX-4

APC Teflon Part #

1" 101T-11.5 101T-1.52" 101T-22.5 101T-2.53" 101T-34" 101T-4

Clamp-Teflon Part #

1" 40MP-G-11.5 40MP-G-1.52" 40MP-G-22.5 40MP-G-2.53" 40MP-G-34" 40MP-G-4

APC (or Alfa) Part #

1" ISS/ISO-11.5 ISS/ISO-1.52" ISS/ISO-22.5 ISS/ISO-2.53" ISS/ISO-34" ISS/ISO-4

Clamp-White Buna Part #

1" 40MPUW-11.5 40MPUW-1.52" 40MPUW-22.5 40MPUW-2.53" 40MPUW-34" 40MPUW-4

Bevel Seat Buna Part #

1" 40BSB-11.5 40BSB-1.52" 40BSB-22.5 40BSB-2.53" 40BSB-34" 40BSB-4

D40 Part #

1" D40-1.51.5 D40-22" D40-2.52.5 D40-33"4"

Bevel Seat Teflon Part #

1" 40BS-H-11.5 40BS-H-1.52" 40BS-H-22.5 40BS-H-2.53" 40BS-H-34" 40BS-H-4

Flat-Wide B.S. Part #

1" 40BS-F-11.5 40BS-F-1.52" 40BS-F-22.5 40BS-F-2.53" 40BS-F-34" 40BS-F-4

Clamp Buna Part #

1" 40MPU-11.5 40MPU-1.52" 40MPU-22.5 40MPU-2.53" 40MPU-34" 40MPU-4

Flat Face-Thin Part #

1" 75R1.5 1505R2" 2005R2.5 2505R3" 3005R4" 40MPU-4

Clamp Flanged-Buna Part #

1" 40MPFU-11.5 40MPFU-1.52" 40MPFU-22.5 40MPFU-2.53" 40MPFU-34" 40MPFU-4

Snaptite Part #

1" HS-11.5 HS-1.52" HS-22.5 HS-2.53" HS-34"

Gaskets


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


20

Supply

Gaskets (cont’d)

Teflon Snaptite Part #

TEF 1 HST-1" 1.5" HST-1.5" 2" HST-2" 2.5" HST-2.5" 3" HST-3- 4" HST-4

I Line-Buna Part #

1" 40-IH-11.5 40-IH-1.52" 40-IH-22.5 40-IH-2.53" 40-IH-34" 40-IH-4

I Line -Teflon Part #

1" 40-IT-11.5 40-IT-1.52" 40-IT-22.5 40-IT-2.53" 40-IT-34" 40-IT-4

John Perry-Buna Part #

1" 40JP-U-11.5 40JP-U-1.52" 40JP-U-22.5 40JP-U-2.53" 40JP-U-34" 40JP-U-4

John Perry-Teflon Part #

1" 40JP-T-11.5 40JP-T-1.52" 40JP-T-22.5 40JP-T-2.53" 40JP-T-34" 40JP-T-4

"Q" Line-Rubber Part #

1" 40QH-11.5 40QH-1.52" 40QH-22.5 40QH-2.53" 40QH-34" 40QH-41.5"-1 40WNQ-1.5-1 (Reducer Gaskets)

"Q" Line-Teflon Part #

1" 40QT-11.5 40QT-1.52" 40QT-22.5 40QT-2.53" 40QT-34" 40QT-41.5"-1 40WTQ-1.5-1 (Reducer Gaskets)

Clamp Screen Gaskets Part #

1" 40MP-US-11.5 40MP-US-1.52" 40MP-US-22.5 40MP-US-2.53" 40MP-US-34" 40MP-US-46" 40MP-US-6

Bevel Screen Gaskets Part #

1" 40BS-US-11.5 40BS-US-1.52" 40BS-US-22.5 40BS-US-2.53" 40BS-US-34" 40BS-US-4

Swedish SMS Part #

1" SMS-40-11.5 SMS-40-1.52" SMS-40-22.5 SMS-40-2.53" SMS-40-34"

Sock Screen Part #

1" T Sock - 11.5 T Sock - 1.52" T Sock - 22.5 T Sock - 2.53" T Sock - 34" T Sock - 4

Valve Seats For60RB Plug & Stem

Part #

1"1.5 31353-0320-22" 31353-0323-12.5 31353-0322-013" 31353-0324-014"

NOTE: SCREEN GASKETS #40MP-UP SAME PRICE AS ABOVE


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


21

Supply

Available in black & White.

PART #Mini-M-70

HYDRO-PRO-150 NOZZLE

PART #HP-150-BLACK

PART #HP-150-RED

PART #HP-150-WHITE

PART #BABTN01-B

M-70 Series NOZZLES With swivel adapter.

PART #M-70/S-70

PART #M-75/S-75

PART #M-77/S-77

Strahman - Wash Down EquipmentReduce Water Consumption AND SAVE!!

Low Flow NozzlesThe Automatic Water Saver Spray Nozzle automatically shuts off the moment the lever is released, thereby eliminating all waste of water.

STANDARD LOW FLOWPSI FLOW (gpm)20 3-1/4 2-1/430 4-1/4 2-3/440 5-1/8 3-1/450 5-7/8 3-3/460 6-3/4 4-1/870 7-1/2 4-1/280 7-3/4 4-7/890 8-1/4 5100 9 5-1/8

M-70 & HYDRO-PRO-150 FLOW TEST

Strahman Extruded Hose Features:• Lightweight, flexible and heavy-duty service. Excellent abrasion resistant and oil resistant

hose. Good Chemical resistance.

Working Pressure: 300 PSI

Minimum Burst Pressure: 1500 PSI

Temperature Rating: Minus 20 degrees to 200 degrees Fahrenheit

Hose Specifications: 5/8˝ Hose Tube & Cover: Tube — FDA Approved compounds. Cover — Carbryn RMA Class A.

Available Sizes: 5/8˝ I.D.

Available Colours: 5/8˝ Red, Yellow, White & Black

Reduce Steam Pressure Costs!

Steam and Cold Water Mixing Units

M-5000TG A Steam and Cold Mixing Water Unit, the M-5000TG is designed to produce hot water instantly from a steady supply of steam and cold water.

Required Steam

Model No.

Required Steam

Pressure*

Required Water

Pressure*

GPM

M-5000 L** 80-95 lbs. 50-80 lbs. 5 - 7

M-5000 M 96-130 lbs. 50-80 lbs. 4.5 - 6

M-5000 H 130-150 lbs. 50-80 lbs. 4.5 - 6

M-5000TG/M-5700TG Unit

The M-5000 unit is available in bronze or chrome-plated material.* Steam pressure required at installation site to ensure proper operation of mixing unit.** Standard unit supplied.

PART #M-5000TG

M-144TG A Steam and Cold Water Mixing Unit, the M-144TG is designed to blend steam and cold water in any desired proportions.

PART #M-144TG


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


22

Supply

SANITARY LUBRICANTS - All CFIA ApprovedHaynes, McGlaughlin Oil, Harco

Lubri-FilmPLUS, Tube, 4 oz.

Haynes Lubri-Film PLUSHeavy duty sanitary lubricant with extended performance, low friction properties specifically designed for longer lubrication intervals. Applications: Pumps, Perpetual moving slicers, Cheese processing equipment, Dispensing units, Bearings, Packings, Plug valves, Locks, and Beverage equipment.

PRODUCT

1 Lubri-Film PLUS, Tube, 4 oz.

2 Lubri-Film PLUS, Drum

3 Lubri-Film PLUS, Pail

Haynes 500 PLUS, 14 oz. Cartridge

Haynes 500, 14 oz. CartridgePRODUCT

1 Haynes 500, Cartridge, 14 oz. , 1 or 10 pack

2 Haynes 500, Cartridge, Drum

3 Haynes 500, Pail

Haynes 500 / 500 PLUSDesigned specifically for food, meat and bakery plants with high temperature (500ºF)/high load bearing applications. Extreme pressure qualities and boundary friction protection. Application: Pumps, Bearings, Packings, Plug valves, Dispensing units, High load bearing equipment, Ball joints, Universal joints, Meat processing equipment, and Perpetual moving slicing equipment.

PRODUCT

1 Haynes CIP Film Tube, 4 oz. , 12 pack

2 Haynes CIP Film, Drum

3 Haynes CIP Film, Pail

CIP-Film Tube, 4 oz.

Haynes CIP FilmSpecifically formulated for Clean-In-Place systems. Low 120ºF melting point ideal for food processing equipment with frequent lubrication intervals. Applications: Fittings, Positive pumps, Threads, Valves, Multi-Port flow selectors, Plug valves, Sanitary CIP systems, and Parts requiring daily lubrication.

Haynes Spray, 9oz. Can

Haynes SprayA USP light duty sanitary oil packaged in handy aerosol spray cans for fast application on food processing equipment as well as drawer slides, doors, hinges, etc. Applications: Valve stems, Pistons, Rings, Conveyors, Slides Pump parts, Gates, Wheels, and Hinges.

PRODUCT

1 Haynes Spray, 9oz. Can, 6 pack

Lubri-Film Cartridge, 12 oz.

Lubri-Film Spray, 11.25 oz.

Haynes Lubri-FilmA heavy duty lubricant with high load bearing, low friction properties for all incidental food contact food processing equipment. Applications: Positive Pumps, Homogenizer pistons, size reduction equipment, Beverage Equipment, Ice Cream Equipment, Yogurt Machines, Batch Freezer, Stainless steel threads, Separators, Clarifiers and Soft Serve Machines.

PRODUCT

1 Lubri-Film, Tube, 4 oz. , 12 pack

2 Lubri-Film, Cartridge, 12 oz. , 6 pack

3 Lubri-Film Spray, 11.25 oz. , 1 or 10 pack

4 Lubri-Film, Drum

Lubri-Film Tube, 4 oz.


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


23

Supply

SANITARY LUBRICANTS - All CFIA Approved (cont’d)

Haynes, McGlaughlin Oil, Moovit, Harco

Haynes Silicone Spray, 12oz. Can

Haynes SprayA USP light duty sanitary oil packaged in handy aerosol spray cans for fast application on food processing equipment as well as drawer slides, doors, hinges, etc. Applications: Valve stems, Pistons, Rings, Conveyors, Slides Pump parts, Gates, Wheels, and Hinges.

PRODUCT

1 Haynes Silicone Spray, 12oz. Can, 6 pack

2 Haynes Silicone, Drum

Petro-Gel

Petrol-Gel is the purest of lubricants, made with an odourless, tasteless high viscosity index paraffinic base oil. Petrol-Gel is compounded with appropriate food grade additives to meet the performance demands for all recommended application. Applications: Sanitary Fitting, Stainless Steel Valves, Homogenizer Pistons, Filling Machine Pistons, Centrifugal Pumps, Guides and Slides Mechanisms, Continuous Direct Draw Ice Cream Freezers, Gaskets and Seals.

PRODUCT1 Petro-Gel, 4oz. Tube, 12 pack

Petro-Gel, 4oz. Tube

Absolutely Tasteless

And Odorless!

Harco - HL-7Contains no animal or vegetable fats, will not turn rancid and remain absolutely neutral when in contact with food products. Tasteless and odorless. Uses: Sanitary valves, Homogenizer pistons and rings, Capper slide and parts. Slice, cutters, fillers, and wrappers. Conveyers, mixers etc. All machine parts that are cleaned daily.

TARYATING

SPRAY

G

HL-7, 11oz. Spray

CanPRODUCT

1 HL-7, 11oz. Spray Can, 12 pack

Standard 24˝ x 32˝ (# 430-2000) and the High-Wall™ 32˝ x 39˝ (# 430-2007) specially designed mats both clean and sanitize. Rubber fingers clean shoe souls while solution sanitizes them. This unique double action helps keep contamination from reaching food processing areas when used at all entrances. Other important locations include doorways to starter rooms, packaging areas, laboratories, employee locker rooms, break rooms, refuse areas and receiving rooms…anywhere you want to limit the spread of contamination.

For more information please contact us at 1-800-361-5361 or 705-743-5361

DISINFECTANT MATS - Stop Contamination at the door!


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


24

Colour Coded

Selecting The Proper BrushThe Carlisle line of brushes and cleaning tools is designed for the food

processing and food service industries. When designing a product, special consideration is given to preventing the possible transfer of bacteria to maintain superior food service hygiene. Cross-contamination from foods and personal hygiene are increasingly important under the new HACCP guidelines. We believe our line represents your very best choice for ef-ficiency, service, and durability in food processing and food service sanita-tion, maintenance, and food preparation.

Brushes and cleaning tools must be very specialized in order to meet all of the unique requirements of the food and processing and food service industries. Brushes and cleaning tools are shaped and sized specially for certain foods, pipes, fittings and equipment used exclusively in the food processing and service environments. Proper bristle selection is also important. Longer bristles are more flexible, taking the same material in a smaller trimmed brush would create a tougher bristle. Maximum bristle tip contact to whatever surface and the proper bristle type for the surface to be cleaned is key. Proper selection is very important for making the cleaning and prepping process as easy and efficient as possible.

When choosing brushes, most fall into one of three basic categories:

1. Circular “tube cleaning” type brushes - tube cleaning brushes are designed to fit inside of drains, valves, tubes and other types of fittings. Tube cleaning brushes are specified by diameter across bristle area. The diameter of the brush should be exactly the same as the opening of the tube or fitting to be cleaned. If the opening is larger than the brush diam-eter, the bristle tips will not contact the walls of the surface to be cleaned. A loose fitting brush means that multiple passes will be required or that the surface may not be cleaned properly. A fit that is too tight reduces cleaning efficiency as well as possibly damaging bristles or resulting in a brush be-coming stuck in an opening. The length of handles for tube brushes should be long enough to reach the entire length of tube or fittings to be cleaned. Tube brushes are often bent or curved to specific shapes for cleaning the outside of tubes, and fittings.

2. Flat “scrub” type brushes - Brushes in this category are for cleaning flat, curved or open surface. Many of our scrub brushes have various “trim” angles to keep bristle tips in contact with surfaces during the cleaning or food prepping process. Our brushes are ergonomically designed to provide superior comfort and control. Scrub rushes come in different handle shapes and lengths for a safe and convenient reach to surfaces.

3. “Pastry and basting” brushes and basting brushes are designed with densely packed, fine bristles for greater “loading” of brush with melted but-ter, vegetable oils, sauces, glazes or other fluids used for food preparation. The greater the mass of bristles and the greater the bristle tip surface area; the greater the amount of fluids that can be spread across food surfaces. Our pastry and basting brushes have high bristle count for greater spread-ing and to eliminate bacteria harboring voids common on most other brands of pastry or basting brushes.

Health standards continue to increase day by day, brushes and cleaning tools will play an increasingly important role in meeting regulations and reducing maintenance costs. The proper brush or tool designed for the right job will endure greater efficiency and greater efficiency and reduce health risks in the food processing and food service environments. Carlisle offers the most comprehensive line of brushes and tools available to meet your very special requirements. We stock a wide range of products to serve customer demands and can provide custom designed products to serve solutions for even more specific needs. Carlisle is your single source for all food processing, food service, and janitorial cleaning products.

Here at Harco we will help you choose the proper brush for your specific job. Call our sales desk today for more information, and a free quote on Carlisle products.

Order Desk: 1-800-363-5361Fax: (705) 743-4312

Email: [email protected]

Is Listeria or other bacteria threatening your product?Sparta’s new “Tri-zone” Color-Coded Brush Program can be your best defense.

More than 400 years ago, man first speculated that certain invisible particles were the cause of infectious diseases. Today, food associated pathogens are a frequent cause of disease in the United States. According to expert estimates, the annual num-ber of food-borne illness is in the millions.

A rash of food poisoning incidents over the past few years has brought renewed attention to the problem as it relates to food processing and dairy plants. Modern, CIP equipment, which promised and delivered so many time-saving benefits, has also created an often too casual atmosphere regarding manual cleaning activities. Consequently, plant personnel are neglecting to thoroughly scrub areas that are cleaned by a CIP system.

The result is often a hazardous level of contamination on milk or food-contact surfaces and in the air throughout the plant.

The FDA has identified the need for a well organized and properly implemented sanitation program. It emphasizes the need for a clean plant environment extending from receiving areas to packaging rooms, and from floor drains to the air.

A critical element in this program is the proper selection, use and care of brushes. The FDA calls for the segregation of brushes to avoid cross contamination. Separate brushes should be used for internal and external surfaces. Brushes should be maintained in good condition, properly stored when not in use and sanitized between uses.

Sparta’s “tri-zone” Colour-Coded Brush Program is the key to keeping brushes in the areas they are used, doing the jobs they are meant to.


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


25

Colour Coded

White Red Yellow Blue Tan Green Grey

6251010 H246RD00 6251020 H246BL00 N/A H246GN00 H246Y00

Gripper Clamp Style Mop HandleHolds mops firmly between the jaws of the mop. Use with 5˝ headband mops only. Fiberglass handle with plastic head.

60˝ L x 1˝ Diameter

Synthetic Blend Cut-End MopColour-coded synthetic mops are the right choice for abrasive floor surfaces such as quarry tile, yet work well for general purpose mopping. These blended mops will absorb 4 - 5 times their weight. Colours resist greying for like-new appearance.

1˝ Head - 24 oz

5˝ Head - 24 oz

White Red Yellow Blue Tan Green Orange Pink

6251810 6251815 6251820 6251825 N/A 6251830 6251835 F132PINK

White Red Yellow Blue Tan Green Orange Pink

6252810 6252815 6252820 6252825 N/A 6252830 6252835 F137PINK

Standard Thread Fiberglass HandleCompliment your colour-coded program with popular fiberglass handles.

48˝ Threaded Fiberglass Handle

60˝ Threaded Fiberglass Handle

60˝ Threaded/Tapered Fiberglass Handle

54˝ - 8’ Telescoping Fiberglass Handle

White Red Yellow Blue Tan Green Black Brown Orange

41225-02 41225-05 41225-04 41225-14 41225-25 41225-09 41225-03 41225-01 41225-24


40220-02 40220-05 40220-04 40220-14 40220-25 40220-09 40220-03 40220-01 N/A


41020-02 41020-05 41020-04 41020-14 41020-25 41020-09 41020-03 41020-01 N/A

White Red Yellow Blue Tan Green Black Brown Orange Purple

40225-02 40225-05 40225-04 40225-14 40225-25 40225-09 40225-03 40225-01 40225-24 40225-68

Wet Mop HandleQuick-release model minimizes contamination, hands never touch the dirty mop. All fiberglass and plastic construction will not rust. Use with 1˝ headband mops only.

60˝ L x 1˝ DiameterWhite Red Yellow Blue Tan Green Grey Orange Purple

41664-02 H146RD00 41664-04 H146BL00 41664-25 H146GN00 H146GY00 41664-24 41664-68

CO

LO

UR

CO

DE

D


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


26

Colour Coded

Mop Bucket and WringerColor-Coded for specialized cleaning - WaveBrake® Side Press and Down Press Combos are color-coded for easy separation of cleaning by room or area to reduce cross-contamination.

Side Pressure

Down Pressure

Red Yellow Blue Tan Green Brown

4402370 4402373 4402374 N/A 4402371 4402372

Red Yellow Blue Tan Green Brown

4402433 4402396 4402431 N/A 4402430 4402432

Omni SweepPerfect for sweeping heavy to fine particles, this broom combines the features of a fine, medium and heavy floor sweep. Short, heavy bristles in front sweep up the large debris, while the long, fine and medium bristles in back sweep the fine particles. Use any standard threaded handle.

18˝

24˝

White Red Yellow Blue Tan Green

41890-02 41890-05 41890-04 41890-14 N/A 41890-09

White Red Yellow Blue Tan Green Orange Purple

41890-02 41890-05 41890-04 41890-14 N/A 41890-09 41890-24 41890-68

White Red Yellow Blue Tan Green Orange Purple

41891-02 41891-05 41891-04 41891-14 N/A 41891-09 41891-24 41891-68

Angle BroomThese angle brooms are designed for general purpose sweeping, reaching into corners, along walls, or in hard to reach areas for fast, efficient cleaning. No hood/shroud to break or gather soil that leads to cross-contamination issues. 54˝ Fiberglass handle.

12˝ Flagged

12˝ Unflagged

Replacement 12˝ Flagged Heads

Replacement 12˝ Unflagged Heads


41082-02 41082-05 41082-04 41082-14 41082-25 41082-09 41082-03 41082-01 41082-24 41082-68

White Red Yellow Blue Tan Green Black Brown

36868-02 36868-05 36868-04 36868-14 N/A 36868-09 36868-03 N/A


41083-02 41083-05 41083-04 41083-14 41083-25 41083-09 41083-03 41083-01 41083-24 41083-68


36867-02 36867-05 36867-04 36867-14 N/A 36867-09 36867-03 N/A 36867-24


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


27

Colour Coded

Hygienic DustpanThis hygienic dustpan makes quick work for clean up. One-piece injection moulded polypropylene construction. Raised handle design with thumb grip. Meets FDA requirements.

12½˝ L x 11½˝ W x 2˝ H

White Red Yellow Blue Green Black Orange Purple

56605 56604 56606 56603 56602 56609 56607 56608

Plastic DustpanThis hand-held rubberized dust pan is durable, will not rust, corrode or dent. Handle has a hang-up hole for easy storage.

12˝ W x 8˝ D x 3˝ H

White Red Yellow Blue Green Black Brown Orange

420-2570 420-2571 420-2572 420-2573 420-2574 225-6068 420-2576 420-2575

Tile & Grout BrushWith a moulded-in scraper this brush is a dual purpose brush that can be held in your hand or used with a threaded handle in two different positions for effectively removing stubborn stains from grouted tile.

1˝ Trim


41323-02 41323-05 41323-04 41323-14 N/A 41323-09

Truck & Wall BrushIdeal for use where lots of water is necessary on trucks, walls, or equipment. Structural foam block with wrap-around vinyl bumper and soft Nylex bristles prevents scratching. Use as a flo-thru or dip-style brush. One threaded flo-thru and one tapered handle hole. Handle sold separately.

9½˝ L x 3˝ W

White Red Yellow Blue Tan Light Green Black Brown

40050-02 40050-05 40050-04 40050-14 40050-25 40050-75 N/A 40050-01

One-Piece Rubber SqueegeePrevent cross-contamination with this economical squeegee in HACCP-friendly colours. Sanitary, solid one-piece construction minimizes possible contamination areas and reduces the possibility for dirt to collect in the squeegee. Handle sold separately.

20˝ Blade

24˝ Blade


36567-02 36567-05 36567-04 36567-14 36567-09 36567-03 36567-24 36567-68


36568-02 36568-05 36568-04 36568-14 36568-09 36568-03 36568-24 36568-68


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


28

Colour Coded

Flared Flo-Thru BrushSoft, flared Nylex bristles cover more cleaning surface in less time. Large 12˝ x 5˝ bristle spread even reaches into corners. Structural foam block with one threaded flo-thru and one tapered handle hole. Handle sold separately.

12˝ L x 5˝ W

White Red Yellow Blue Tan Light Green

41278-02 41278-05 41278-04 41278-14 N/A 41278-75

Wand BrushIdeal for brushing particles and dust from conveyor belts, work tables, radiator coils, or any other narrow, hard-to-reach place. Slip resistant, durable 24˝ plastic handle will not crack or splinter.

9˝ Brush - 2¼˝ Trim


41198-02 41198-05 41198-04 41198-14 41198-25 41198-09 N/A 41198-01

General Purpose Hand Scrub BrushMedium-stiff polyester bristles are ideal for scrubbing cutting boards and counter tops. Great for hard-to-clean and close quarter work where a larger brush won’t fit.

2½˝ W x 6˝ LWhite Red Yellow Blue Tan Green Black Brown

40521-02 40521-05 40521-04 40521-14 40521-25 40521-09 N/A 40521-01

Hi - Lo Floor Scrub BrushDesigned to give maximum cleaning action in both open areas and under counters or equipment. Three-position bristle trim maintains effective scrubbing straight up or at an angle. Easily cleaned polypropylene bristles are set into a durable structural foam block that won’t warp, crack, split or splinter. Handle sold separately.

10˝L - 1¼˝ Bristle TrimWhite Red Yellow Blue Tan Green Orange Purple

40423-02 40423-05 40423-04 40423-14 N/A 40423-09 40423-24 40423-68

Counter & Bench BrushThese handy brushes are exceptionally durable, yet surprisingly inexpensive. Quickly remove dust and dirt from counters, benches, shelves or other hard-to-reach spots. All brushes feature a convenient hanging hole for better storage. Overall length 13˝. Plastic block.

8˝ Brush - 2½˝ TrimWhite Red Yellow Blue Tan Green Black Brown Orange Purple

40480-02 40480-05 40480-04 40480-14 40480-25 40480-09 40481-00 40480-01 40480-24 40480-68


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


29

Colour Coded

Hook CIP BrushCleans the tops and sides of up to 4˝ diameter pipes with ease. Extra-heavy fill, medium polyester bristles are twisted in heavy-duty wire for thorough cleaning. 5˝ handle can be used as is, or screw in longer handle for overhead work. Handle sold separately.

Hook Brush


41100-02 41100-05 41100-04 41100-14 41100-25 41100-09 41100-03 41100-01

Outside CIP BrushMakes quick work of cleaning the outside of pipes. With a flip of the wrist, the split head slips over pipes and locks on tight. Stiff polyester bristles. 7˝ handle has rubber bumper. Screw in longer handle for over-head work. Handle sold separately.

Adjustable 1½˝ to 3˝ D


41390-02 41390-05 41390-04 41390-14 41390-25 41390-09 N/A 41390-01

Tank, Kettle & Equipment BrushAll-around flared head design assures thorough cleaning action from any angle. Bristles are imbedded directly into the block, which reduces bacterial buildup. Never dents or scratches because the block can’t touch the surface being cleaned. Handle sold separately.

5½˝ W x 9˝ L

5½˝ W x 7½˝ L

6˝ W x 10½˝ L - 3 Hole


40043-02 40043-05 40043-04 40043-14 40043-25 40043-09 40043-03 40043-01 40043-24 40043-68


40041-02 40041-05 40041-04 40041-14 40041-25 40041-09 40041-03 40041-01 40041-24


41177-02 41177-05 41177-04 41177-14 41177-25 41177-09

40041

41177

40043-68

Floater Hand Scrub BrushSo lightweight they actually float. Non-absorbent block won’t crack or chip. Bristles rinse easily for quick clean-up. These tough, durable and economical brushes are perfect for a multitude of cleaning chores.

8˝ Handle - 15/8˝ Brush

20˝ Handle - 15/8˝ Brush


40541-02 40541-05 40541-04 40541-14 40541-25 40541-09 40541-03 40541-01 40541-24 40541 -68


40501-02 40501-05 40501-04 40501-14 40501-25 40501-09 40501-03 40501-01 40501-24 40501 -68


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


30

Colour Coded

Double End Valve & Fitting BrushOutperforms any other two brushes on the market for plug valve cleaning. The tapered shape and stiff bristles handle any job. The white plastic handle will not swell, splinter or crack. Center grip offers perfect balance and control. Fits all sizes from 1 1/2˝ to 4˝ diameter.

19˝ Double End Valve BrushWhite Red Yellow Blue Tan Green Black Brown

40679-02 40679-05 40679-04 40679-14 40679-25 40679-09 N/A 40679-01

Atlas Multi-Purpose BrushThese medium-stiff bristled brushes are a favourite for a wide range of tasks: valves, horn hoops, outlets, kettles, or urns. Choose the oval trim with bristles set at a forward angle to loosen soil without marring. Available in oval or round, with choice of handle lengths.

Oval, 3.5˝ x 5˝ Trim, 16˝ Length

Oval, 3.5˝ x 5˝ Trim, 30˝ Length

3˝ Round, 16˝ Length







40002-02 40002-05 40002-04 40002-14 N/A 40002-09


40003-02 40003-05 40003-04 40003-14 N/A 40003-09


40004-02 40004-05 40004-04 40004-14 N/A 40004-09


40005-02 40005-05 40005-04 40005-14 N/A 40005-09


40010-02 40010-05 40010-04 40010-14 N/A 400102-09


40006-02 40006-05 40006-04 40006-14 N/A 40006-09


40007-02 40007-05 40007-04 40007-14 N/A 40007-09


40008-02 40008-05 40008-04 40008-14 N/A 40008-09

40002-02

40003-05

40004-04 40005-14 40010-09

40006-05

40007-14

40008-04


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


31

Colour Coded

Valve, Tube & Fitting BrushMaking cleaning of concealed places inside elbows, tees and valves a snap with these, galvanized twisted-in-wire brushes. Heavy-duty construction with large plastic handle. Overall length 15˝. Choose elbow (curved) or straight models to clean through 1˝ - 3˝ ID tubes.

1˝ Elbow

1 1/2˝ Elbow

2˝ Elbow

2 1/2˝ Elbow

3˝ Elbow

1˝ Straight

1 1/2˝ Straight

2˝ Straight

2 1/2˝ Straight

3˝ Straight


40160-02 40160-05 40160-04 40160-14 N/A 40160-09


40161-02 40161-05 40161-04 40161-14 N/A 40161-09


40162-02 40162-05 40162-04 40162-14 N/A 40162-09


41195-02 41195-05 41195-04 41195-14 N/A 41195-09


41196-02 41196-05 41196-04 41196-14 N/A 41196-09


40180-02 40180-05 40180-04 40180-14 N/A 40180-09


40181-02 40181-05 40181-04 40181-14 N/A 40181-09


40182-02 40181-05 40181-04 40181-14 N/A 40181-09


40183-02 40183-05 40183-04 40183-14 N/A 40183-09


41197-02 41197-05 41197-04 41197-14 N/A 41197-09

Chute, Valve & Bottle BrushHeavy-duty, soak-proof brushes offer a dense fill of stiff bristles for greater cleaning efficiency and superior wear. Tough, but gentle bristles are firmly imbedded into the stem. White plastic handles with knurled grip offer better cleaning control.

Large/Quart is 3¼˝ D X 16˝ L

Small/Pint is 2¾˝ D x 12˝L


40001-02 40001-05 40001-04 40001-14 40001-25 40001-09 40001-03 40001-01 40001-24 40001-68

White Red Yellow Blue Tan Green Brown Orange

40000-02 40000-05 40000-04 40000-14 40000-25 40000-09 40000-01 40000-24

FDA approved materials BPA free40001-68

40001-09

40000-04

40000-05


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


32

Colour Coded

Valve Outlet BrushValve Outlet Brushes are a must for 100% thorough cleaning. With its heavily filled bristle area, this brush will really do the job. Twisted-in-wire construction.

1½ Diameter x 15˝ L

White Red Yellow Blue Tan Green Brown Orange

41170-02 41170-02 41170-04 41170-14 41170-25 41170-09 41170-01 40350-24

Floor Drain BrushSpecial female threaded handle accepts the floor drain brushes only to prevent cross contamination. Long lasting polypropylene bristles and plastic handle (sold separately) stand up to rugged use. “USE FOR FLOOR DRAIN ONLY” is prominently imprinted in English and Spanish on the plastic drain handle (sold separately) to prevent contact with food and serving utensils.

3˝ Diameter 4˝ Diameter 5˝ Diameter 6˝ Diameter 36˝ Handle 48˝ Handle 60˝ HandleWhite

40236-00

Black

40146-00

White

40238-00

Black

41093-00

Black

40148-00

White

40237-00

Black

40147-00

Tygon Tubing & Pipe BrushSanitary brush with medium polyester bristles are twisted in flexible galvanized wire to effectively clean the inside of Tygon and other plastic tubing. Loop end handle for hanging. Fit 1˝ - 3˝ tubing sizes.

1˝ D, 24˝ L

1 1/2˝ D, 24˝ L

2˝ D, 24˝ L

3˝ D, 24˝ L

1˝ D, 36˝ L

1 1/2˝ D, 36˝ L

2˝ D, 36˝ L

3˝ D, 36˝ L


41176-02 41176-05 41176-04 41176-14 N/A 41176-09


41181-02 41181-05 41181-04 41181-14 N/A 41181-09


41184-02 41184-05 41184-04 41184-14 N/A 41184-09


41189-02 41189-05 41189-04 41189-14 N/A 41189-09


40177-02 40177-05 40177-04 40177-14 N/A 40177-09


40178-02 40178-05 40178-04 40178-14 N/A 40178-09


41185-02 41185-05 41185-04 41185-14 N/A 41185-09


41190-02 41190-05 41190-04 41190-14 N/A 41190-09


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


33

Colour Coded

Polyethylene Cutting BoardColour code your cutting boards to avoid cross-contamination. Assign a different colour for each specific use. The high-density polyethylene makes them great for food handling because they resist staining and absorption. A specially designed surface helps keep knives sharp longer. Boards won’t crack or chip. Colour goes all the way through. NSF; meets USDA and FDA specifications. Custom cut sizes available; call for more info.

12˝ L x 18˝ W x ½˝ D

18˝ L x 24˝ W x ½˝ D


10882-02 10882-05 10882-04 10882-14 10882-25 10882-09


10887-02 10887-05 10887-04 10887-14 10887-25 10887-09

Hand PadHelp reduce cross contamination by designating these light to medium duty coloured hand pads for use in specific areas. Open web design allows for quick washing and reuse. Pad conforms to cracks and crevices on surface to get a deep down clean. Made of 100% virgin nylon fiber, these pads will not rust or splinter. Easy on hands. (White and green one time use.)

6˝ x 9˝ - 20 Case


456-2980 421-2100 421-2102 421-2101 421-2104 456-2960

Sani-Safe CutleryBacteria, acid, moisture, fats and grease can’t penetrate the formed, polypropylene handle. An impervious seal where the super sharp, high carbon stainless steel blade enters the rivetless handle; provides sanitary protection. USDA accepted NSF listed.

3¼˝ Paring Knife

6˝ Boner Knife

8˝ Cooks Knife

10˝ Cooks Knife

8˝ x 3˝ Solid Turner

White Red Yellow Blue Tan Green Purple

303-2005 303-2008 303-2009 303-2006 303-2004 303-2007 303-2003


303-2015 303-7023 303-7024 303-7021 303-2016 303-7022 303-7014


303-2085 303-2088 303-2089 303-2086 303-2084 303-2087 303-2071


303-2074 303-2078 303-2079 303-2076 303-2075 303-2077 303-2077


303-2265 303-2268 303-2269 303-2266 N/A 303-2077


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


34

Colour Coded

Plastic ScoopThese low-cost scoops are versatile and long-lasting. Tough, resilient polypropylene meets FDA requirements. Material won’t rust or corrode. Sterilizable. Convenient hook for hanging. 82-ounce scoop features a closed ribbed handle for better grip.

16 oz. Scoop - 3.5˝ W x 10 1/4˝ L x 2 1/4˝ D

32 oz. Scoop - 5˝ W x 11 1/2˝ L x 2 3/4˝ D

82 oz. Scoop - 6 1/2˝ W x 15˝ L x 3 1/2˝ D

White Red Yellow Blue Green

63005 63004 63006 63003 63002


64005 64004 64006 64003 64002


65005 65004 65006 65003 65002

Pink Orange Purple

65001 65001 65008

Mega ScoopWith a huge 128-ounce capacity, this scoop is the largest we offer. Moulded in one-piece of thick-walled polypropylene, they are extremely durable and make quick work of moving all kinds of bulk material. Meet FDA requirements. Sterilizable.

12˝ W x 8˝ D x 3˝ HWhite Red Yellow Blue Green

65505 65504 65506 65503 65502

Mixing Paddle ScraperOne-piece polypropylene construction is ideal for mixing or scraping in many food manufacturing applications. Compatible with product temperatures up to 176°F constant and 212°F intermittent. Meets FDA requirements. Available with or without holes. Blade measures 6˝ x 13˝.

40˝ with Holes

40˝ Solid

52˝ with Holes

52˝ Solid


67745 67744 67746 67743 67742


67755 67754 67756 67753 67752


67765 67764 67766 67763 67762


67775 67774 67776 67773 67772


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


35

Colour Coded

Paddle ScraperThis line of paddle scrapers also performs double-duty as spatulas for virtually every type of dairy and food processing operation. Light, easy-to-handle and absolutely sanitary. Even with hard use they won’t scratch, leave black marks, or get dull. Fully accepted by sanitation and health authorities. Models feature a semi-rigid nylon blade for superior scraping action. Blades measure 4½˝ x 7˝.

Scraper with 13½˝ Plastic Handle

Scraper with 40˝ Plastic Handle


40350-02 40350-02 40350-04 40350-14 N/A 40350-09 N/A N/A 40350-24


40352-02 40352-02 40352-04 40352-14 N/A 40352-09 N/A N/A 40352-24

Lightweight Hand ScraperThis lightweight scraper is made from polypropylene to ensure stability and can be used for many applications.

6˝ LWhite Red Yellow Blue Tan Green Black Brown Orange Purple

HAR-2-02 HAR-2-05 HAR-2-04 HAR-2-14 HAR-2-25 HAR-2-09 HAR-2-03 HAR-2-01 HAR-2-24 HAR-2-68

ScraperThese sanitary scrapers are perfect for pans, vats, tables and counter tops. One-piece design moulded from sturdy polypropylene with no seams or cracks to harbor bacteria. Tapered handle and thumb indentation for strong grip. Can be sterilized. Meets FDA requirements.

Small Scraper 3˝ W x 8˝ L

Large Scraper 43/8˝ W x 9¾˝ L


69615 69614 69616 69613 N/A 69612

White Red Yellow Blue Black Green Orange Purple

69625 69624 69626 69623 69629 69622 69627 69628

White Red Yellow Blue Green Black

69815 69814 69816 69813 69812 6896BKSS

Plastic ShovelSturdy, one-piece shovel is constructed of rigid yet lightweight polypropylene. Perfect for hauling hefty loads. Smooth finish for easy clean-up. Deep bucket for extra capacity and an edged blade for easy scooping. Chemical and corrosion resistant. They even float. White, red, yellow, blue and green meet FDA and USDA requirements for food handling. Use black for non-food products.

11˝ W x 14˝ D x 38˝ L

14˝ W x 17˝ D x 42˝ LWhite Red Yellow Blue Green Black Orange Purple

69825 69824 69826 69823 69822 69829 69827 69828


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


36

Colour Coded

5-Hook Utility RackColor Coded for Sanitation. Color coding reduces the spread of bacteria. Hold brushes, brooms, scrapers, scoops, shovels, mops, and squeegees on 2.5˝ long hooks. Hold tools together in one area or for one operation. One inch spacing from wall allows cleaning behind rack. Colored PVC rod and PVC coated steel wire racks are not effected by bleaches and most acids & solvents. Ten available colors.

16˝ wide 5-hooks - 3˝ H x 17.25˝ W x 3˝ D

26˝ wide 12-hooks - 6.5˝ H x 26˝ W x 4˝ D

36˝ wide 16-hooks - 6.5˝ H x 36˝ W x 4˝ D

White Red Yellow Blue Green Black Brown Pink Orange Purple

4030 4032 4031 4034 4033 4035 4036 4037 4038 4039


4040 4042 4041 4044 4043 4045 4046 4047 4048 4049


4050 4052 4051 4054 4053 4055 4056 4057 4058 4059

16˝ wide 5-hooks3˝ H x 17.25˝ W x 3˝ D

26˝ wide 12-hooks6.5˝ H x 26˝ W x 4˝ D

36˝ wide 16-hooks6.5˝ H x 36˝ W x 4˝ D

Aluminum Brush RackHang brushes on a rack in their colour-coded zone to maintain bristles for cleaning effectively. Peg-type racks are made from heavy gauge anodized aluminum with solid aluminum pegs. Offset design and peg angle help keep brushes away from wall. Holes are 16˝ on center to fit standard wall studs. Screws included for mounting on brick or concrete.

17˝ RackWhite Red Yellow Blue Green Black

40735-02 40735-05 40735-04 40735-14 40735-09 40735-03


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


37

Colour Coded

Round DollyDollies fit our 20, 32, 44, and 55 gal containers for safe transport of heavy loads. Simple twist-to-lock feature securely attaches dolly. Containers can be pushed or lifted without accidentally coming off. Dollies include standard non-marking 3˝ swivel casters. Dolly has replaceable casters for long life. Available in BLACK ONLY.

Black

2640

White Red Yellow Blue Green Grey

341056-02 341056-05 341056-04 341056-14 341056-09 341056-23

Bronco Round Containers and LidsHeavy-duty containers with double reinforced stress ribs and drag skids for ultimate durability in any application. Containers and lids available in 7 colours to compliment your colour coded program. White, yellow, blue and grey are made of USDA-accepted material and all colours are NSF Std. #2 for food contact and cleanability.

10 Gallon Container

20 Gallon Container

32 Gallon Container

44 Gallon Container

55 Gallon Container

10 Gallon Flat Lid

20 Gallon Flat Lid

32 Gallon Flat Lid

44 Gallon Flat Lid

55 Gallon Flat Lid

White Red Yellow Blue Green Grey Orange

341010-02 341010-05 341010-04 341010-14 341010-09 341010-23 341010-24


341020-02 341020-05 341020-04 341020-14 341020-09 341020-23 341020-24


341032-02 341032-05 341032-04 341032-14 341032-09 341032-23 341032-24


341044-02 341044-05 341044-04 341044-14 341044-09 341044-23 341044-24


341055-02 341055-05 341055-04 341055-14 341055-09 341055-23


341011-02 341011-05 341011-04 341011-14 341011-09 341011-23 341011-24


341021-02 341021-05 341021-04 341021-14 341021-09 341021-23 341021-24


341033-02 341033-05 341033-04 341033-14 341033-09 341033-23 341033-24


341045-02 341045-05 341045-04 341045-14 341045-09 341045-23 341045-24

— Ergonomic Comfort Curve™ handles provide for easy handling

– even when full

— Deep hand holds on base for safe controlled tipping or overhead lifting

— Lids are reinforced and have snap down tab locks

with a simple press & pull release system for

easy removal

BPAfree


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


38

Colour Coded

Round Brute Container and LidRugged all-purpose containers built for tough food plant conditions! Brutes feature crush-resistant construction to withstand blows that would ruin most others. Use them for food products or waste — white, yellow, blue and grey are made of USDA-accepted materials and comply with FDA regulations, NSF #2. Seamless design for easy cleaning. Add a dolly to convert Brutes to mobile bins.

10 Gal. - 155/8˝ D x 171/8˝ H

20 Gal. - 19½˝ D x 227/8˝ H

32 Gal. - 22˝ D x 27¼˝ H

44 Gal. - 24˝ D x 31½˝ H

55 Gal. - 26½˝ D x 33˝ H

Flat Lid - 16˝ D x 1˝ H

Flat Lid - 19¾˝ D x 1¼˝ H

Flat Lid - 22¼˝ D x 13/8˝ H

Self Draining Lid - 24.2˝ D x 1.5˝ H

Flat Lid - 26¾˝ D x 2˝ H

Dome Top Lid - 22¼˝ D x 13/8˝ H

Dome Top Lid - 2413/16˝ D x 125/8˝ H

Dome Top Lid - 27¼˝ D x 14½˝ H


2610WHT 2610RED 2610YEL 2610BLU 2610GRN 2610GRY








2655WHT 2655RED 2655YEL N/A 2655GRN 2655GRY








N/A 2637-88RED N/A N/A N/A 2637-88GRY


2645-60WHT 2645-60RED 2645-60YEL 2645-60BLU 2645-60GRN 2645-60GRY


N/A 2647-88RED N/A N/A N/A 2647-88GRY




N/A 2657-88RED N/A N/A N/A 2657-88GRY


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


39

Colour Coded

White Red Grey

KA8114WH KA8114RED KA8114GRY

14 Qt. BucketSturdy plastic bucket resists acids, alkalies, paints, chemicals and cleaning compounds. Easy-pour spout. Moulded in graduations for easy measuring.

12˝ D x 11¼˝ H

10 Qt. BucketAvoid contamination by matching pail colour to a particular job or zone in your plant. These strong, lightweight pails have a steel bail.

10 Qt. Pail

White Red Yellow Green Black

04900 04904 04903 04901 04902

5 Gallon Plastic PailAvoid contamination by matching pail colour to a particular job or zone in your plant. These strong, lightweight pails have a steel bail with heavy-duty plastic handle. HDPE material meets FDA specifications. Pails and lids sold separately.

5 Gal. Pail

Lid

White Red Yellow Blue Tan Green Black Brown Orange Grey

532-2005 532-2010 532-2015 532-2030 N/A 532-2025 532-2020 532-6001 532-7005 532-2035

White Red Yellow Blue Tan Green Black Brown Orange Grey

532-2105 532-2110 532-2115 532-7000 N/A 532-2125 532-2120 532-6011 532-6040 532-7003


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


40

Colour Coded

Heavy Duty TECHTRUCKSHigher placed molded handles on cart make TechTrucks™ more ergonomic. Doublewall top increases both durability and truck lifespan dramatically. Swivel casters improve stability. Molded collar eliminates frame cost and delivery problems. Rotationally molded from FDA approved polyethylene, except black.

420 C - 5/8 Volume Cubic Yards, 58˝ L x 30˝ W x 37˝ H, 1000 lbs Max. Load

441 C - 1.1 Volume Cubic Yards, 66˝ L x 36˝ W x 41˝ H, 1200 lbs Max. Load

Red Yellow Blue Black Grey

420C-RED 420C-RED 420C-BLU 420C-BLK 420C-GRY

Red Yellow Blue Black Grey

441C-RED 441C-RED 441C-BLU 441C-BLK 441C-GRY

Clamp GasketsThe standard 40MP-U BUNA clamp gasket just got better! Colours make it easy to code by area or date changed. Flexible, non-toxic compounds meet FDA specifications for direct contact with dairy products and edible oils, as well as 3-A, USDA and NSF criteria. Sold individually, but order in package quantities of 25 for more economical pricing.

1˝ BUNA

1½˝ BUNA

2˝ BUNA

2½˝ BUNA

3˝ BUNA

4˝ BUNA

6˝ BUNA

Red Yellow Blue Green Black Pink

2911568 2911575 2911582 291-1589 40MPU-1 2911561


2911570 2911577 2911584 291-1591 40MPU-2 2911563


2911571 2911578 2911585 291-1592 40MPU-2.5 2911564


2911572 2911579 2911586 291-1593 40MPU-3 2911565


2911573 2911580 2911587 291-1594 40MPU-4 2911566


2911574 2911581 2911588 291-1595 40MPU-6 2911567


2911569 2911576 2911583 291-1590 40MPU-1.5 2911562


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]


41

Colour Coded

13.

17.

21.

20.

6981 11" Blade6982 14” Blade

16.

18.

5. 8.

14.

15.

Description Red White Yellow Green BlueHercules, 8" Utility Scrub 40541-05 40541-02 40541-04 40541-09 40541-14Hercules, 20" Long Handle 40501-05 40501-02 40501-04 40501-09 40501-14Floater, 8" 40541-05 40541-02 40541-04 40541-09 40541-14Floater, 20" Long Handle 40501-05 40501-02 40501-04 40501-09 40501-14Tank Brush - “Bowl Shape” 41200-02Tank and Kettle Brush - Large 40043-05 40043-02 40043-04 40043-09 40043-14Tank and Kettle Brush - Regular 40041-05 40041-02 40041-04 40041-09 40041-14Chute and Valve Brush - Large 40001-05 40001-02 40001-04 40001-09 40001-14Chute and Valve Brush - Small 40000-05 40000-02 40000-04 40000-09 40000-14Elbow Brush, 1" 40160-05 40160-02 40160-04 40160-09 40160-14

1½” 40161-05 40161-02 40161-04 40161-09 40161-142” 40162-05 40162-02 40162-04 40162-09 40162-142½” 41195-05 41195-02 41195-04 41195-09 41195-143” 41196-05 41196-02 41196-04 41196-09 41196-14

Valve Fitting Brush, 1" 40180-05 40180-02 40180-04 40180-09 40180-141½” 40181-05 40181-02 40181-04 40181-09 40181-142” 40182-05 40182-02 40182-04 40182-09 40182-142½” 40183-05 40183-02 40183-04 40183-09 40183-143” 41197-05 41197-02 41197-04 41197-09 41197-14

Valve Outlet Brush 41170-05 41170-02 41170-04 41170-09 41170-14Double-End Plug, Valve & Fitting Brush 40679-05 40679-02 40679-04 40679-09 40679-14Outside CIP Brush, Fiberglass Handle extra 41390-05 41390-02 41390-04 41390-09 41390-14Hook CIP Brush, Fiberglass Handle extra 41100-05 41100-02 41100-04 41100-09 41100-14Hi-Lo Floor Scrub, Fiberglass Handle extra 40423-05 40423-02 40423-04 40423-09 40423-14Floor Scrub, Fiberglass Handle extra 40431-05 40431-02 40431-04 40431-09 40431-14Wall Brush, Fiberglass Handle extra 40050-05 40050-02 40050-04 40050-09 40050-14Handles:

Plastic, threaded for regular 36" - 40230-00 -Or large tank brush 48" - 40233-00 -

54" - 41165-00 -60" - 40232-00 -

(For #355 Tank Brush) - 41010-00 -Fiberglass, 60" 40225-05 40225-02 40225-04 40225-09 40225-14

Fiberglass Telescoping, 8" 41020-05 41020-02 41020-04 41020-09 41020-14Racks, Choice of 6 Colours 40735-05 40735-00 40735-04 40735-09 40735-14

Rack, Black, Aluminum 40735-03Floor Drain Brush, Black 3" 40146 4" 40147 5" 41093 6" 40148

Handles, Floor Drain Only 36" 40236 48" 40237 60" 40238

1. 2.

3.

4.

5.6.7.8.

9.

10.

11.

12.

13.14.15.16.17.18.19.

20.

21.

22.

All of these products make setting up a HACCP compliant food operation easier.More Colour Coded products available.

1. & 3.

2. & 4.

9.

10.

12.

7.

6.

11.

19.

Bacteria Threatening Your Products?Colour coded brushes are designed to help promote food safety with colour coded work zones and tools. Having a colour coded system in affect will minimize the risk of cross contamination in your work zones.


K9J 7K2

1-800-361-5361 705-743-5361

Fax: 705-743-4312

[email protected]

www.harcosupply.comSince 1964

Product LineServing the Dairy and Food Processing Industries Since 1964.

Colour C

oded / Mini-S

upply Catalogue - 12-120

Specialty Parts & Supply

Brushes• Sparta Brushes • Stainless Steel Sponges• Nylon Scouring Pads • Squeegees• Janitorial Supplies

• Plate Heat Exchangers• Valves • Separators• Gaskets• Pumps

• Sanitary & Utility Valves• The Universal Control Top For

Hygienic Process Valves

Fittings & Valves• Sanitary Bevel Seat Fittings • Valves-Butterfly, Plug, Air • Clamp Fittings• Weld Fittings • S S Tubing• NPT Fittings• Pipeline Hangers• Bürkert Fluid Control Systems

Hose & Tubing• Steam Hose

• Instrumentation Tubing

• Sanitary Hose for Food and Beverage Applications

• Food Master Sanitary Hose• Homogenizers & Parts• Plate Heat Exchangers• Plate Reconditioning Service• Rental Plates

Gaskets• Sanitary (Bevel Seat)

• Alloy Products

• Cherry Burrell

• G&H-Clamp and Flat seat

• John R. Perry Sanitary

• Tri-Clover (Clamp)

• DeLaval

• Snaptite

Lubricants• Haynes Sprays

• Lubri film

• Petro Gel

• CIP Lube

• Harco HL-7

• Moovit Sprays

TARYATING

SPRAY

G

Miscellaneous• Cleaners

• Pads & Sponges

• Kettles

• Aprons

• Disinfectant Mats

• Plastic Shovels

• Tools & Accessories

• Recorder Charts

• Pens

Thermometers & Gauges

• Thermometers

• Sanitary Instrumentation

• Homogenizer Gauges

• Sani-Flow Gauges

• Digital Thermometers

• Positive Rotary Pumps

• Centrifugal Pumps

• Replacement Parts

• Valves & Fittings

Spare Partsfor All Makes

• Homogenizers & Parts• Heat Exchangers• Pumps• Valves• Blenders• Tuchenhagen

• Mixing Units • Hose Stations • Hose Assemblies • Water Saver Nozzles • Hose Racks • Hose Accessories

Pails & Utensils• Stainless Steel Containers

• Stainless Steel Sanitary Pails

• Scoops & Dippers

• H-Duty Sanitary Shovels

• Pitch and Cheese forks and more...

Pumps• AlfaLaval• Ampco• DeLaval• Fristam• G&H Centrifugal Pumps

and Parts• Jabsco• Tetra Pak• Tri-Clover• Waukesha• Wilden

Repair Service For All Makes.

Ampco Pumps• ZP1 & ZP2 SERIES Pump

- All Stainless Steal Gear Case!

• LC/LD/LF Series Pumps

PARTS, EQUIPMENT AND SUPPLIES › product › ...w.harcosu ply.com 675 The Parkway Peterborough, ON K9J 7K2 1-800-361-5361 705-743-5361 Fax: 705-743-4312 [email protected] Parts, Equipment,

Documents