PARTS CATALOGUE 2019 All prices exclude VAT. Prices valid from 15th January - 30th April 2019 and are available from participating John Deere dealers only. Prices apply under reservation of any increases due to currency fluctuations or unforeseeable price increases.
104
Embed
PARTS CATALOGUE · 2019-05-07 · PARTS CATALOGUE 2019 All prices exclude VAT. Prices valid from 15th January - 30th April 2019 and are available from participating John Deere dealers
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
PARTS CATALOGUE2019
All prices exclude VAT. Prices valid from 15th January - 30th April 2019 and are available from participating John Deere dealers only. Prices apply under reservation of any increases due to currency fluctuations or unforeseeable price increases.
F O R T U N E FAVO U R S T H E P R E PA R E D
Our tips and tricks help you get a head start on every season.
FE B R UARY
I T M AY B E T I M E T O R E P L AC E S O M E T R AC T O R PA R T S
Time to get your tractor into tip-top shape with genuine parts installed by our John Deere technician.
MAR C H
E A S T E R & J O H N D E E R E M E R C H A N D I S E
Get ready for Easter and discover our wide range of merchandise items – there’s something for everyone!
AP R I L
G E T YO U R AC R E A DY F O R T H E H E AT
Keep a cool head and get your air conditioning and air filters checked out – make an appointment now!
KNOW MORE, SEE MORE.
OUR EXPERTS
Do you want to be sure that your machines are ready, available, and always running at peak performance? The Expert Check will get you there.
EXPERT CHECK INSPECT & CONNECT
Our Inspect & Connect programme includes a thorough check of your tractor with options to enhance connectivity, performance and safety at an attractive fixed price – increase your uptime and minimise your cost of operations.
Your tractor will get a thorough 75-point inspection for about three hours at your premises to breathe new life into it. We’ll also install a telematics device that transmits machine hours and location for even better service going forward.
Your tractor already has a few hours of operation under its belt but is still looking good and performing well. Now it’s important to keep it up-to-date to maintain its low cost of operation. To that end, we’ll give it a thorough three-hour inspection and install telematics for connectivity for up to 5 years.
You’ll want to keep your primary workhorse in excellent shape, with optimal performance all round. We will give it a thorough 125-point inspection health check and reactivate its connectivity for up to 5 years. This enables you to track your entire fleet online.
E X P E R T C H E C K F O R 6 03 0 S E R I E S T R AC T O R S
E X P E R T C H E C K F O R 6 M /6 R S E R I E S T R AC T O R S
E X P E R T C H E C K F O R 7R /8 R S E R I E S T R AC T O R S
3
NEW YEAR, NEW OPPORTUNITIESA CATALOGUE FOR DOING THINGS BETTER
Whether it’s to work smarter, save more, or to make your machines last longer – this year, make some of the changes you’ve been thinking about to improve your business. This catalogue has all you need to make it happen – parts, attachments and accessories for making sure you have a great 2019.
Tractor Parts and Attachments ........................................... 4
Remanufactured Parts and Components ........................... 30
Combine Parts and Attachments ....................................... 34
SPFH Parts and Attachments ............................................ 48
Baler Parts and Attachments ............................................ 60
Mower Conditioner Parts and Attachments ....................... 66
Planting and Seeding Parts and Attachments .................... 67
Sprayer Parts and Attachments ......................................... 70
Gator Parts and Attachments ............................................ 73
Home & Workshop
High Pressure Washers ..................................................... 81
Hand Tools ...................................................................... 95
14
34
U LT I M AT E S E AT
You can't be too comfortable
C O M B I N E M U LT I T O O L
One tool, many uses
Tractor PartsAttachments
Combine PartsAttachments
SPFH PartsAttachments
Baler PartsCrop Packaging
Seeding
Sprayer PartsAttachments
Gator Parts
C O N T E N T S
4
BRE10141, BRE10142
Buying a John Deere tractor is only the beginning. We continuously create more products that help you run a better business. This catalogue is filled with them.
TRACTOR PARTS AND ATTACHMENTS
F I X E D M O U N T I N G B R AC K E T S
CAB COMFORT
Right hand window mounted, 6R BL15042
A L L YO U R D I S P L AY S AT A G L A N C E
Right hand window mounted, 7R, 8R, 9R RE317435
Right hand window mounted, Utility tray BRE10142
Right hand window mounted, 7020, 7030, 8000, 8010, 8020, 8030, 9020, 9030 BRE10141
Expanded mounting versatility within your cab. Fully adjustable to your needs. Most 5-9 Series tractor cabs RE343680
C-post bracket, 6030, 6030 Premium, 6M BL15158
B-post bracket, 6MC, 6RC SJ20109
A or B-post bracket, most 5-9 Series tractor cabs AL175909
5
CommandARM Bracket, 7R, 8R BRE10147
X-Grip mobile holder BRE10015
Tablet holder BRE10255
X-Grip tablet holder BXE10479
X-Grip mobile holder BXE10606
X-Grip tablet holder BXE10607
T H E R E ’ S L O T S T O D O – G E T
C O M F O R TA B L E
W I T H S C R E W P L U G F O R B R A C K E T S O R T H R E A D S
I N D I V I D UA L M O U N T I N G B R AC K E T S – S U I TA B L E F O R M O S T O F YO U R M AC H I N E S
High quality LED lights emit powerfully wide white light that turn your nights into days, with less eyestrain. They also last 44 times longer than halogen bulbs.
MOUNTING POSITION PART NUMBER
Rear roof (inner), Front roof (mid) BL15717
Beltline, hanging or upright BL15719
Rear fender BL15718
Rear roof (side), Front roof (outer) BL15999
Front roof with panorama roof BL15844
BEAM PATTERN EFF. LUMENS SHAPE PART NUMBER
1Flood
2300 OvalRE574752
Trapezoid RE574753
2Flood
1728
Square MCXFA1951
3 RoundMCXFA1956
Trapezoid MCXFA1952
4Flood
1500 OvalMCXFA1950
Trapezoid MCXFA1955
5Flood
860
Round
RE574376
Trapezoid RE574377
6Flood
700RE564385
Trapezoid RE564386
L E D P E D E S TA L L I G H T S F O R M A N Y D I F F E R E N T L O C AT I O N S
L E D AT TAC H M E N T L I G H T S
In addition to already installed work lights – kit contains 2 lights for 6R Series plus mounting and wiring.
John Deere advertises the effective lumens of the lights as it is an accurate rating of the light in normal use. Many aftermarket lights will only reference raw lumens because their effective lumens are very low.
Provides excellent visibility during poor weather and in muddy working conditions.
8R, 9R BRE10037
S U N S H A D E S
Keep the sun out of your eyes. Available for the front, rear and side window. The shades also help to reduce heat build-up in the cab. Easily adjustable for maximum comfort.
D E C A L Reduce glare with an attractive rear window decal featuring the John Deere logo at the top.
S TA I N L E S S S T E E L E X H AU S T P I P E A N D H E AT P R O T E C T I O N Make your tractor stand out from the rest, while getting the same genuine John Deere quality and durability you expect.
DESCRIPTION EXHAUST PIPE LENGTH SERIES PART NUMBER
Stainless steel heat protection for exhaust pipe
–
6030, 6030 Premium AL175376
Stainless steel exhaust
6105M-6125M Stage IIIB, 6105R-6125R Stage IIIB
BL15163
6130M-6170M Stage IIIB, 6130R-6210R Stage IIIB
BL15162
100.4 cm 6110M-6155M Stage IV, 6110R-6155R Stage IV
BL15384
87.5 cm 6110M-6130M Stage IV, 6110R-6130R Stage IV
BL16174
111.7 cm 6135M-6195M Stage IV, 6135R-6215R Stage IV
BL15842
108.4 cm 6175M-6195M Stage IV, 6175R-6250R Stage IV
BL15383
Stainless steel licence plate bracket
Please order mounting hardware in addition
6M, 6R L220057
L O C K A B L E D E V I C E S – VA N DA L P R O T E C T I O N Added protection against theft and vandalism when machines are out of sight, as in civil engineering projects.
DESCRIPTION SERIES PART NUMBER
Lockable door handlesMost 5-9 Series tractors, 6R FT4 (-1L06130RKG866074)
AL71345
6R FT4 (-1L06130RKG866074) BL15804
Lockable fuel tank cap – green
5E, 5M, 6 Series tractors with Stage IIIB or Stage IV
AL213203
Lockable fuel tank cap – black
Most 5 and 6 Series tractors before Stage IIIB AL113087
5E, 5M, 6 Series tractors with Stage IIIB AL212916
Lockable device for StarFire 3000/6000 receiver – all Series BPF11074
12
1
2
3
3
4
5
6
6
7
G A S S T R U T S
Our sealing system prevents gas leakage and keeps gas pressure constant for consistently smooth opening and closing of tractor cab doors, windows and bonnets. You’ll get a perfect fit for easy installation. Look forward to perfect operation and holding force.
Not all gas struts are created equal. You typically find out just how true that statement is when they stop working properly. We suggest you skip that step. Go straight to things working great all the time by buying genuine John Deere struts only. They last longer and keep their pressure better. No more, no less.
7 reasons to choose genuine John Deere:
7 | Machined coupling – Easy to fit
6 | Precision-engineered piston – Smooth action
5 | Stainless steel salt spray tested – Guaranteed
2 | All weather lubricating oil – Built and tested to agricultural specification
1 | Special fitting to reduce torsional forces – Long life
3 | Durable seal – Maintenance free
4 | Heavy duty tube – Corrosion proof components
13
T O O L B OX
Reinforced, punched side panel.5 compartments on 3 levels – foam padded, lockable.*
MCKTB7402dimensions 470 x 220 x 260 (W x D x H)
MCKTB7408dimensions 530 x 220 x 260 (W x D x H)
E X T E R N A L T O O L B OX
External detachable and lockable toolbox.
RE275592
G E T O R G A N I S E D
All your essential hand tools in one place, always at hand.
U N I V E R S A L R A D I O S
Our new models feature professional-grade dust protection with concealed USB and SD card connections. Larger buttons enhance ease of use when off road, and the latest software updates for A2DP Bluetooth functionality add connectivity options. Get crystal clear reception thanks to an enhanced antenna connection and upgraded circuitry.
The Bluetooth® word mark is a registered trademark of Bluetooth SIG, Inc.
DESCRIPTION PART NUMBER
USB Radio MCXFA1892
Bluetooth® Wireless Technology and USB Radio MCXFA1893
USB, CD Radio MCXFA1894
Bluetooth® Wireless Technology, USB and CD Radio MCXFA1895
* Also fits the tool box compartment on newer 6Rs.
F E AT U R E S F O R A L L S H O W N S E AT S :
– Air suspension with low frequency (1.2 Hz) – Horizontal adjustment – Height adjustment – 80 mm – Adjustable backrest – Adjustable swivel – 15 degree – Operator presence switch – Armrests adjustable in height and angle
F E AT U R E S
DESCRIPTION ULTIMATE SEAT SUPER DELUXE COMFORT-SEAT
SUPER COMFORT-SEAT
COMFORT-SEAT
Series 6105R-6215R 6M, 6R 6000-6020 & SE, 6030, 6030 Premium, 7030 (E) Premium, 6M, 6R
Lumbar support Pneumatic Pneumatic Pneumatic Mechanical
Adjustable seat cushion depth and angle
–
Telescopic backrest extension –
BL15954 + BL16252 BL15039 BL15038 BL15037
SEAT COVERS
Fabric – MCJHD4428 MCJHD4402 MCJHD4300
Leatherette – – MCJHD4402S MCJHD4300S
–
YOUR BACK MATTERS TO US Our genuine seat solutions offer a wide range of adjustments and suspension characteristics to make sure you are comfortable and protected during those long hours in the cab.
15
ADJUSTABLE SETTINGS FOR PERFECT COMFORT AND SUPPORT
Learn more about the wide range of adjustment options and comfort features of our genuine seat solutions.
Pneumatic lumbar support
Seat heating
Armrest angle adjustment
Armrest height adjustment
Telescopic backrest extension
Backrest angle adjustmentLateral
suspension
Adjustable swivel
Automatic weight and height adjustment
Horizontal suspension
Activated carbon sign
Seat pan depth adjustment
Horizontal adjustment
Seat cushion inclination
The air suspended seat shown here is equipped with low frequency and dynamic damping system (BL15039 for 6R Series tractors)
Air suspension with low frequency and Dynamic Damping System (DDS)
A I R S U S P E N S I O N W I T H L OW F R E Q U E N C Y T E C H N O L O G Y
– Absorbs jolts and vibrations and reduces unpleasant shocks to the spinal column
– Ensures a calm, relaxed driving experience, especially at higher speeds
A I R S U S P E N S I O N W I T H L OW F R E Q U E N C Y T E C H N O L O G Y A N D DY N A M I C DA M P I N G S Y S T E M
– Enhances the absorption of low-frequency vibrations – Prevents the seat from striking the vertical stops when
accelerating rapidly or when working in uneven terrain – Significantly reduces stress and strain on the operator
L AT E R A L S U S P E N S I O N – Protects the operator's back – especially the lumbar
area – by absorbing vibrations and shocks at 90° to the driving direction
– More comfortable support on slopes – Can be activated/deactivated depending on the application
(field work/transport) for added flexibility and comfort
H O R I Z O N TA L S U S P E N S I O N – Minimizes horizontal vibrations when travelling fast, pulling
implements or trailers and when working in rough terrain – Protects the operator's back from harmful shocks – Can be activated/deactivated depending on the application
(field work/transport) for added flexibility and comfort
JOHN DEERE SEAT SUSPENSION IN DETAIL
GUARANTEED FUEL ECONOMY OR YOUR MONEY BACK*
F U E L G UA R A N T E E Use more than our target fuel consumption and we’ll refund the difference.
E F F I C I E N C Y B O N U S Use less than our target fuel consumption and we’ll pay you a bonus of 2x the difference.
6 R (6 C Y L I N D E R ), 7R , 8 R T R AC T O R S Fuel guarantee includes 6R (6cyl), 7R and 8R Series tractors and applies now to field applications and transport mode.
* The fuel guarantee programme is valid and offered only by participating John Deere dealers from 1st November 2018 until 31st October 2019 for all new, never retail sold 6R (6cylinder), 7R and 8R Series tractors, purchased or leased between these dates and requires an explicit online enrolment. The guarantee programme is valid for field applications and for transport applications (above 20 kph) in accordance with the provided JDLink data. Contact your John Deere dealer for more details on the enrolment process.
T H E F U E L G UA R A N T E E P R O G R A M M E . D O M O R E . G UA R A N T E E D.
NOW! E V E N M O R E .
G UA R A N T E E D
Includes all applications Field + Transport
17
AIR CONDITIONING COMPONENTS AND SERVICE
When things heat up around you, you can stay cool with John Deere Air Conditioning Components.
TRACTOR AIRCON PACKAGE Air conditioning service – take a fresh breath
Cab Air Filters Condenser Evaporator Receiver Dryer
Rigorously tested, you can count on these components to help you keep a cool head on even the hottest day. Decide on genuine John Deere Air Conditioning Components for quality that will last for years to come. Expect new and improved specifications for optimal cooling performance, and improvements to reduce the risk of oil and refrigerant leakage.
Benefit from: – Optimal cooling performance – More safety through clear windows – A professional repair service
Make sure your air conditioning is working properly before the arrival of summer. Systems naturally leak gas and a recharge is recommended every two years. Stay cool to operate efficiently! S E R V I C E I N C L U D E S
– Change of cab air filter and refrigerant substance – Cleaning of evaporator and removal of bacteria,
moisture and odours – Check for leakage – Check of drive belt.
AC Compressor
?! When replacing AC compressors, the AC system has to be flushed, and a new receiver dryer must be installed. We will get the job done and have you back at work in no time at all.
ALL-INPACKAGE
18
12
3
4
R E L I A B L E D R I V E – F O R H I G H E S T E F F I C I E N C Y
DRIVE BELTS
Cross section scheme of drive belts
1 | T O P S U R FA C E
A special rubber surface ensures high wear resistance.
2 | E M B E D D I N G C O M P O U N D
Highly adhesive rubber compound layers provide excellent v-belt stability.
3 | T E N S I O N C O R D
The low-stretch polyester cord guarantees highest stability and extreme tensile strength.
4 | B A S E C O M P O U N D – L O W P R O F I L E H E I G H T
High flexibility and excellent heat radiation for maximum lifetime, even in the most demanding environments.
DESCRIPTION SERIES PART NUMBER
w/o air conditioning and w/o pneumatic trailer brake
5020, 5070M-5080M, 5R Stage IIIA, 6010-6410 & SE, 6205, 6020-6420S & SE, 6215 L114489
6105M-6140M Stage IIIB, 6110M-6145M Stage IV + MY18 L212327
6150M Stage IIIB, 6155M Stage IV + MY18 L203300
S TA N DA R D K I T
– Rod, main and thrust bearings – Thrust washers – Oil pan split gasket – Piston/liner kits, liner packings – Front and rear seals – Gasket rings, snap rings
E X PA N D E D K I T
– Standard kit content – Rod bolts and bushings – Piston pins – Camshaft bushings
E N G I N E OV E R H AU L K I T
Our overhaul kits contain genuine John Deere components that are manufactured and tested to the latest John Deere specifcations. Choose genuine John Deere parts for your next engine overhaul, and restore the original quality and performance of your machine.
ENGINE REPAIR OPTIONS – THE POWER OF CHOICE
?! Engine overhaul kits from other suppliers are not the same. You can't see the difference but your engine can. Be sure of the best with a genuine John Deere engine overhaul kit.
R E M A N U FAC T U R E D C O M P L E T E E N G I N E S A N D C O M P L E T E B L O C K A S S E M B L I E S (C B A )
As an alternative to an overhaul, how does reducing downtime by 50% or more sound? John Deere remanufactured engines are produced by replacing 100% of critical wear parts with genuine new or remanufactured John Deere parts. When reduced downtime, higher quality, fixed repair costs and company product support are important to you, look to John Deere Reman solutions. A Reman Complete Engine or CBA is the most efficient solution for you, offering a parts and labour warranty of up to two years, 2,000 hours*.
– Equivalent to “new” in terms of reliability and performance, maximum uptime – Cost competitive with engine rebuilding options – Available in “complete” or “basic” engine configurations or as CBA**
* Up to two year, 2,000 hour warranty for Complete and Basic Engines in agricultural application (1st year with unlimited hours).Complete Block Assemblies and Short Blocks come with a one year warranty, unlimited hours.
** For more information please use the Reman Engine Configuration Chart on page 33.
20
21
3
8
11
3
10
12
7
9
6
14
13
45
GENUINE PROTECTION
DESCRIPTION PART NUMBER
CAB
1 Fresh air filter AL220527
2 Recirculation air filterw/ air conditioning L214634
w/o air conditioning L205372
3 Activated carbon kit (1 x air filter, 2 x recirculation air filter) AL208648
ENGINE
4 Safty element air filter6110R-6215R AL215054
6230R-6250R AL221988
5 Main cartridge air filter
6110R-6130R AL215055
6135R-6215R AL215053
6230R-6250R AL221987
6 Main fuel filter6110R-6135R RE551508
6145R-6250R (SN 866041-) RE560681
7 Fuel pre-filter6110R-6135R RE560682
6145R-6250R (SN 866041-) RE551507
6/7 Fuel filter kit (pre- and main filter) 6145R-6250R (SN -866040) RE556406
8 Oil filter6110R-6135R (order in addition R502513) RE504836
Scan the code to see a short video explaining why genuine engine air filters are superior.
F I LT E R S F O R 6 R S E R I E S T R AC T O R S (S TAG E I V )
1
2
3
4
5
6
7
21
THEY’RE JUST BETTER TOGETHER.
John Deere engineers design our maintenance products to work hand in hand to defend your machine against harsh conditions and wear. Plus, both John Deere Filters and Plus-50 II Engine Oil are ready to protect new Tier 4 engines. Don’t take your equipment to the field without this winning combo. Trust John Deere Filters and Oil to help your machines last.
When you pair John Deere Oil Filters with premium Plus-5O II Engine Oil, there’s no stopping you for 750 hours*!
1 | R U B B E R G A S K E T S S P E C I F I C A L LY D E S I G N E D F O R E A C H A P P L I C AT I O N
Tighter seal than cork or plastic gaskets used by most competitors.
2 | N U T P L AT E W I T H R O L L E D T H R E A D S Rolled threads prevent metal contamination.
3 | H E AV Y- D U T Y O N E - P I E C E M E TA L E N D C A P S Much stronger and better seal.
4 | C R I M P E D S P I R A L C E N T R E T U B E Stronger, prevents media collapse.
5 | T I G H T P L E AT S A N D E V E N M E D I A S PA C I N G
Filtration for better protection.
6 | A D D I T I O N A L P L E AT L O C K O N L A R G E R F I LT E R S Consistent and even media spacing.
7 | H E AV Y- D U T Y C A N I S T E R Stronger, longer fatigue life.
* Extended drain interval up to 500 hours and even up to 750 hour drain interval for selected equipment with John Deere Tier 4 engines when the following criteria are met: 1. Engine is equipped with an extended drain interval oil pan, 2. Machine operates with Plus-50 II Engine Oil, 3. Machine uses a John Deere Oil Filter, 4. Machine uses only Ultra Low Sulphur Diesel fuel.
22
When pulling large trailers with heavy loads it is essential to have sufficient stopping power. The pneumatic trailer brake system delivers powerful and safe braking performance.
A I R T R A I L E R B R A K E S
GENUINE CONNECTIONS
DESCRIPTION SERIES PART NUMBER
6030 & 6030 PREMIUM SERIES
Air trailer brake
w/o front axle brake 6130-6630, 6230-6630 Premium AL171451
w/ front axle brake 6230-6630 Premium AL171452
w/o front axle brake 6830-6930, 6830-7530 Premium AL171453
w/ front axle brake 6830-7530 Premium AL171454
Additional air supply parts 6030, 6030 Premium AL171455
Air pressure gauge 6030 AL180574
Air dryer kit6130-6630, 6230-6630 Premium AL203442
6830-6930, 6830-7530 Premium AL203022
Additional engine parts
w/ air conditioning 6130-6430, 6230-6430 Premium AL171488
w/o air conditioning 6130-6630, 6230-6630 Premium AL171490
w/ air conditioning
6530-6630, 6530-6630 Premium AL171491
6830-6930 Premium AL171494
7430-7530 Premium AL171497
w/o air conditioning 6830-7530 Premium AL171496
6M & 6R SERIES
Air trailer brake (Air dryer included)
w/o front axle brake
6105R-6130R Stage IIIB, 6110R-6135R Stage IV BL15558
P N E U M AT I C T R A I L E R B R A K E – G A S K E T K I T S F O R A I R C O M P R E S S O R
SERIES PART NUMBER
5020, 6000 & SE, 6010 & SE, 6020 & SE, 6030, 6030 Premium, 7030 Premium, 7000, 7010, 8000, 8010, 8020, 8030, 8R (SN -053099)
AL113954
7R RE345076
P N E U M AT I C T R A I L E R B R A K E – A I R D R Y E R C A R T R I D G E
Pneumatic trailer brake systems have to be free of moisture to operate reliably. Genuine John Deere air dryers reduce the amount of moisture to a minimum to avoid the risk of corrosion in brake components.
24
AL159972
AL159964
AL117720
MCXFA1386
MCXFA1449
RE199501
L175355 | AL201044 | AL201045
E N D S F O R M E C H A N I C A L C E N T R E L I N K S
Category 3, heavy duty 6000-6020 & SE, 6030, 6030 Premium, 7030 (E) Premium, 6MC, 6RC, 6M, 6R
AL159964
D R A F T L I N K S – PAW L F O R H O O K E N D S
DESCRIPTION SERIES PART NUMBER
Category 2
5020, 5M, 5R Stage IIIA R222164
6000 & SE, 6010 & SE, 6020 & SE, 6030, 6030 Premium, 7030 (E) Premium, 6MC, 6RC, 6M, 6R
AL117720
Category 3 N 6000 & SE, 6010 & SE, 6020 & SE, 6030, 6030 Premium, 7030 (E) Premium, 6MC, 6RC, 6M, 6R, 7000, 7010, 7030, 7R, 8000, 8010, 8020, 8030 (T), 8R (T)
AL117727
Q U I C K H I T C H B A L L S – F O R C E N T R E L I N K U S E Quick hitch balls and conversion bushings for quick hitch balls.
DESCRIPTION PART NUMBER
Category 2 MCXFA1386
Category 3-2 MCXFA1388
Category 3 MCXFA1387
CONVERSION BUSHING (PACKAGE OF 2)
Category 2-1, length 51 mm MCXFA1449
Category 2-1, length 41 mm MCXFA1448
Category 3-2, length 51 mm MCXFA1451
S TA B I L I Z E R B A R S Adjustable stabilizer bars allow the operator to manually adjust the lateral movement, by moving a pin and adjusting holes in the stabilizer bar. The adjustable stabilizer can be mounted on the left and right draft link.
DESCRIPTION SERIES PART NUMBER
Stabilizer bar, adjustable5020, 5R Stage IIIA AL180109
5M RE242457
Yoke 6010 & SE, 6020 & SE, 6030, 6030 Premium, 6MC, 6RC, 6M, 6R
L175355
Link body AL201044
Link end AL201045
Stabilizer bar, standard 7020, 7030 RE199501
25
MCXFA1340
MCXFA1385
BL16026
L217361
Q U I C K H I T C H B A L L S – F O R D R A F T L I N K U S E
DESCRIPTION PART NUMBER
Category 2 Ball diameter 56 mm MCXFA1385
Category 3-2Ball diameter 64 mm
MCXFA1383
Category 3 MCXFA1384
Category 4-3Ball diameter 85 mm
MCXFA1334
Category 4 MCXFA1335
WITH CONE
Category 2 Ball diameter 56 mm MCXFA1340
Category 3-2Ball diameter 64 mm
MCXFA1341
Category 3 MCXFA1339
C AT E G O R Y 3 H I T C H B A L L W I T H C O L L A R
Prevents excessive wear at draft link hook ends and the mounting points of implements. The 10 mm collar on each side leaves enough space for the hook end to move. This is especially useful when driving on slopes or in curves.
L217361 – 6-8 Series tractors
J O H N D E E R E P I C K- U P H I T C H – I N S E R T C H O I C E S
One-person hitching with excellent visibility. Depending on the application, different coupling devices are available for the pick-up hitch:
– Hook-type insert – Drawbar insert – 80 mm ball insert with keeper plate
DESCRIPTION SERIES PART NUMBER
Hook-type insert
5020, 5M, 5R Stage IIIA, 6000 & SE, 6010 & SE, 6020 & SE, 6030, 6030 Premium, 7030 (E) Premium, 6MC, 6RC, 6M, 6R, 7020, 7030, 8R (SN -090000)
L156433
7R, 8R (SN 090001-) R559513
Drawbar insert 5020, 5M, 5R Stage IIIA, 6000 & SE, 6010 & SE, 6020 & SE, 6030, 6030 Premium, 7030 (E) Premium, 6MC, 6RC, 6M, 6R
AL159328
80 mm ball insert with keeper plate – field installation kit
From transport to light tillage or deep draft work, correct weighting ensures optimum use of your John Deere tractor.
At one time or another, almost all applications benefit from you getting more power to the ground to reduce slippage and tyre wear, protect soil and save fuel – get our quick mount rear wheel weights to give you up to 55 kg/hp of ballast. And remember that when you’re working with forces like that, you need to protect your windows from mud, stones and debris, so be sure to check out our rear fender extensions too.
DESCRIPTION SERIES PART NUMBER
ADAPTER SET (2 X 50 KG) FOR 100 KG AND 250 KG – FIRST INSTALLATION
275 mm bolt circle diameter, for two-position steel wheels, outside mounting
6130M-6170M Stage IIIB, 6135M-6195M Stage IV + MY18, 6125R-6150R Stage IIIB, 6130R-6155R Stage IV + MY18
BL15909
335 mm bolt circle diameter, for two-position steel wheels, outside mounting
6170R-6210R Stage IIIB, 6175R-6250R Stage IV + MY18
BL15894
QUICK MOUNT WEIGHT SET – BL15909 OR BL15894 ALREADY INSTALLED
200 kg (2 x 100 kg)6M, 6R
BL15892
500 kg (2 x 250 kg) BL15893
Q U I C K M O U N T R E A R W H E E L W E I G H T S – 1 0 0 KG / 25 0 KG
100/250 kg weight
29
R E A R W H E E L W E I G H T S – 2 0 5 KG
DESCRIPTION SERIES PART NUMBER
Set, 554 kg (2 x 72 kg, 2 x 205 kg) – first installation
6150R-6210R Stage IIIB, 6175R-6215R Stage IV + MY18, 6140M-6170M Stage IIIB, 7210R-7310R, 8245R-8370R Stage IV, 9R
BL15071
Set, 410 kg (2 x 205 kg) – BL15071 already installed
Set 110 kg (2 x 55 kg) – AR56636 already installed
AL119956
* A rear fender extension with an overall width of 2.50 m is already installed.** If 2.55 m short rear fender extension is already installed.
*** If 2.75 m extra coverage extension is already installed.
R E A R F E N D E R E X T E N S I O N S
Protection from mud, stones and debris, and helps keep windows clean. Available in different widths, the extensions can be combined with mudguards, to keep steps clean for slip-free tractor entry.
DESCRIPTION SERIES PART NUMBER
110x15 (total coverage 2.20 m)6030 (Premium), 6M
AL174767
190x20 (total coverage 2.38 m) AL174769
110x23 (total coverage 2.20 m) 6R Stage IIIB, 6110R-6155R Stage IV + MY18
BL15017
200x23 (total coverage 2.38 m) 6R BL15018
250x23 (total covarage 2.52 m) 6R Stage IIIB, 6175R-6250R Stage IV + MY18
BL15144
Additional extension*(total covarage 2.73 m)
6170R-6210R Stage IIIB, 6175R-6250R Stage IV + MY18
BL15879
2730x354 (total coverage 2.73 m) 6175R-6215R MY18, 6230R-6250R Stage IV
BL16209
1750x400 (total coverage 2.15 m) 6MC, 6RC BL15477
Short rear fender extension (total coverage 2.55 m)
7R, 8R
RE318606
Additional extension** – for short rear fender (total coverage 2.75 m)
RE324406
Additional extension*** – for extra coverage rear fender (total coverage 3.00 m)
7R, 8030, 8R BRE10069
205 kg weight
38.5 kg weight
55 kg weight
BL16209 – Fender extension with 2.73 m total coverage
30
J O H N D E E R E A N D R E M A N U FAC T U R I N G
John Deere has been remanufacturing parts and components for more than 20 years. During the remanufacturing process, failed and worn parts are replaced with OEM parts, and then inspected and tested to original performance specifications. It’s an environmentally friendly repair alternative for increased uptime and performance, while lowering operational costs.
C U S T O M E R A DVA N TAG E
– Same or better quality as new parts or components – Uptime – gets machines back to work faster – Lower price than new parts or components – Reman parts have a one year unlimited warranty – Reman Complete and Basic Engines have a two year
or 2,000 hours (unlimited hours in 1st year) warranty – Component exchange vs. component repair = lower costs
and less machine downtime for you.
REMANUFACTURED PARTS AND COMPONENTSRemanufacturing returns previously sold and used products or components to “like-new” or “better-than-new” condition – warranted in performance level and quality. The mirror image of new.
WHY IS A REMAN OPTION HARD TO BEAT?
O U R P R O M I S E – YO U R A DVA N TAG E
– John Deere Quality – Optimised Machine Uptime – John Deere Warranty – Reduced cost of operation – Remanufactured to latest specifications
That’s why a Reman option is hard to beat!
“ T H E Q UA L I T Y I ’ M U S E D TO
AT A G R E AT P R I C E – T H AT ’ S
J O H N D E E R E R E M A N ! ”
C U S TO M E R T E S T I M O N I A L
Shown here is just a sample of the complete John Deere Reman offering. Ask us what Reman components are available for your machine.
IN S
TOCK
AN
D R
EA
DY
TO
GO
COMPE T I T IV E P R I C I N G
L AT E S T P E R F O R M A N C E E NHANCEMENTS
TESTE
D TO
BE TH
E SAM
E AS N
EW
F U L L J O H N D E E R E WA R R A N T Y
Complete Engines
Alternators
Electronic components
Transmissions
Complete Block Assemblie
s
Starters
& M
otor
s
AC C
rom
pres
sors
Hydr
aulic
Pumps
Turbochargers
F O R A G E H A R V E S T E R S
SPR
AY
ERS
OEM E
NG
INE
S
C O M B I NESTR AC T O R S
It´s not rebuilt it´s
your machine reborn
32
Our Reman starters and alternators are produced using only genuine OEM parts and approved remanufacturing processes, then tested against original part specifications. They come with a full one year warranty.
A LT E R N AT O R S (S E L E C T I O N)
REMANUFACTURED STARTERS AND ALTERNATORS
Starters and Alternators are heavily used on any machine. Replacing them with remanufactured components from John Deere is a cost-effective solution.
* The prices shown include a 100% core credit for the old part when returned to the John Deere Dealer. Actual core value will vary depending upon condition of returned part.
33
K E Y B E N E F I T S O F J O H N D E E R E R E M A N U FAC T U R E D E N G I N E S :
– Reduce downtime of 50% or more compared to an overhaul – 100% cost competitive product compared to outside supplier
rebuilding options or dealer overhauls – Up to two-year, 2,000-hour warranty, Complete Block Assemblies
and short Blocks come with a one-year warranty, unlimited hours – Meets stringent John Deere quality specifications with only
genuine parts – Remanufactured, not rebuilt to the point of failure
R E M A N E N G I N E C O N F I G U R AT I O N C H A R T
H AV E A N E N G I N E T H AT I S O N I T S L A S T L E G S ? Check out our family of Reman Engine Solutions that will breathe some new life into your machine.
JOHN DEERE REMAN ENGINES
Our Reman line of engines are a minimum down-time, low-cost repair alternative, built to provide the same John Deere quality you are used to.
COMPLETE BASIC COMPLETE BLOCK ASSEMBLY
SHORT BLOCK
MAJOR COMPONENTS
Cylinder Block
Balancing Shafts as Appropriate for Model
Crankshaft
Connecting Rods
Pistons
Camshaft
Front Gear Train
* Cylinder Head, Valves, Valve Springs, Valve Keepers, Rocker Arm Assembly, Valve Cover –
Fuel Package (Pump, Lines, Nozzles & Filter), Air Package (Aftercooler, Turbocharger as Appropriate for Model), Intake & Exhaust Manifolds
– † –
PUMPS AND ACCESSORIES
Oil Pump Assembly –
Oil Cooler – –
Oil Pan – –
* Oil Filter Housing and Filter Water Pump – –
Front Plate as Appropriate for Model –
Front Plate Cover – –
Vibration Dampener – – –
GASKETS AND SEALS
Gasket Kit
Front & Rear Seals –
Rear Seal Housing (6081 Applications Only) –
PAINT
Tan Paint Based on Application – – –
Green or Yellow Paint Based on Application – – –
Black Semi-Gloss Paint – –
* Each configuration is not available for all applications. † The S250 (5030 & 4024 engines) CBA is also offered in a configuration that includes the integrated fuel system and does not include the oil pump.
34
Combine PartsAttachments
COMBINE PARTS AND ATTACHMENTSPerformance, uptime and cost of operation are the three critical factors for a successful harvest. Using only genuine parts and performing regular inspections of key wear parts are essential to each one.
C O M B I N E M U LT I T O O L This is practical. A pressed steel, branded, multi-functional tool designed to give you fast multi-panel access and for checking the gap in combine sieves. Can also be used as a screwdriver during the day, and doubles as a bottle opener when you’re all done. MCXFA1962
O N E T O O L , M A N Y O P T I O N S
35
Combine PartsAttachments
AXE37174
MCXFA1961
AXE23480
AU G E R F I N G E R S
New auger fingers feature a breakaway groove, enabling them to break at a specific point and fall back into the auger drum to prevent platform damage. Auger finger retainers prevent broken fingers from being moved into the combine, minimising the potential damage caused by stones or other foreign objects.
Key benefits of genuine fingers: – Higher elasticity and hardened area
Key benefits of genuine finger bearings: – Solid material and no deformation when under heavy loads
P L AT F O R M – K N I F E G UA R D S
Genuine knife guards undergo a special surface treatment to give them superior wear characteristics for longer life, especially in abrasive crop and soil conditions. When they’re worn, they use more power. You can avoid the resulting increase in fuel consumption by replacing knife guards in time. Worn knife guards can lead to lower ground speed and reduce the lifetime of knife sections. Replace knife guards when they are broken, bent or if the gap exceeds 5.4 mm. Use our die cast multi use tool specifically designed for measuring the wear on combine knife guards.
Key benefits of genuine knife guards: – Superior wear characteristics due to special surface treatment
C R O P L I F T E R S
Crop lifters can be easily installed on the knife guards. They ensure optimum performance in laid crop conditions.
DESCRIPTION SERIES PART NUMBER
Kit of 10 steel auger fingers, retainer and pins
600R, 700PF, 600F, 600X
AH214868
Finger cap H168206
Finger bearing AH171602
Finger H169914
DESCRIPTION SERIES PART NUMBER
Welded knife guard 600R, 600X, 700PF AXE37174
Forget knife guard 600R, 600X H153719
Easy Check Tool All Series MCXFA1961
SERIES PART NUMBER
600R, 700PF, 600X AXE23480
36
Combine PartsAttachments
P L AT F O R M – C U T T I N G PA R T S
John Deere offers you individual knife sections as well as complete cutterbars. Use the following overview of the knife segments to ensure easy and quick servicing of your cutterbar.
Fine serrated knife section (for grass and linseed, small grain in green straw and weedy conditions)
25 teeth Z93078
Example: 622R
Head section
Middle
Coupler
Cutterbar segment overview for 600R (coarse serrated)
TYPE HEAD SEGMENT QUANTITY MIDDLE SEGMENT
614R AH168890
615R AH168890
616R AH168890 1 AH168892
618R AH168890 1 AH168892
620R AH168890 1 AH168892
622R AH168890 1 AH168892
625R AH168890 2 AH168892
630R AH168890 2 AH168892
635R AXE19894 2 AH168892
* Price per piece
TYPE HEAD SEGMENT QUANTITY MIDDLE SEGMENT
614R AH168891
615R AH168891
616R AH168891 1 AH168893
618R AH168891 1 AH168893
620R AH168891 1 AH168893
622R AH168891 1 AH168893
625R AH168891 2 AH168893
630R AH168891 2 AH168893
635R AXE19895 3 AH168893
Cutterbar segment overview for 600R (fine serrated)
* Price per piece
37
Combine PartsAttachments
C U T T E R B A R K I T S F O R 6 0 0X
Save time and money by purchasing a complete cutterbar kit instead of replacing individual parts.
DESCRIPTION MODEL PART NUMBER
Coarse serrated
622X KXE10306
625X KXE10308
630X KXE10309
635X KXE10310
640X KXE10311
Fine serrated
622X KXE10463
625X KXE10464
630X KXE10465
635X KXE10466
640X KXE10467
End section
section
Coupler
QUANTITY COUPLER TYPE END SEGMENT
1 AH168906 614R AH202536
1 AH168906 615R AH168894
2 AH168906 616R AH221747
2 AH168906 618R AH168896
2 AH168906 620R AH168898
2 AH168906 622R AH168900
3 AH168906 625R AH168902
3 AH168906 630R AH168900
4 AH168906 635R AXE20195
* Price per piece
QUANTITY COUPLER TYPE END SEGMENT
1 AH168907 614R AH202537
1 AH168907 615R AH168895
2 AH168907 616R AH221748
2 AH168907 618R AH168897
2 AH168907 620R AH168899
2 AH168907 622R AH168901
3 AH168907 625R AH168903
3 AH168907 630R AH168901
4 AH168907 635R AXE20196
* Price per piece
38
Combine PartsAttachments
MCXFA1874
MCXFA1873 MCXFA1917
F E E D E R H O U S E : C H A I N S A N D S L AT S
Feederhouse chains are crucial for overall combine performance. Replace them if they make noise during operation or have reached 3% elongation and can no longer be adjusted.
Scraper slats maximum 10 W/T-Series (5 walker) HXE33371
Outer chain standard
2
96XXWTS, W/T-Series (6 walker)
AZ63336
Inner chain standard AZ63337
Outer chain heavy duty AZ102573
Inner chain heavy duty AZ102574
Complete conveyor chain, heavy duty
1 AZ102572
Slat 51 Z100723
Scraper slats maximum 10 W/T-Series (6 walker) HXE33370
DESCRIPTION PART NUMBER
Grinding grain moisture tester MCXFA1874
Grain moisture testerMCXFA1873
MCXFA1917
G R A I N M O I S T U R E T E S T E R
Moisture can cripple a whole year's harvest if it is not checked from time to time. Ignoring it can lead to:
– Additional costs if the harvested grain needs to be dried before it can be sold – Loss of dried grain value since it has to be sold for less than its market value – Spoiling the grain if it happens to be wet and is stored at low temperatures or in drying bins
A grain moisture tester is invaluable for preserving the value of your crop and ensuring that it sells for what it is worth.
HXE33371 Scraper slats are recommended if material wraps around the top shaft.
39
Combine PartsAttachments
KXE10049
AH205119
AZ58904
KXE10036
KXE10110
R O TA R Y C O M B I N E S – T H R E S H I N G PA R T S
Worn-out threshing components are a significant drag on rotary combine performance. Use the rotor wear gauge (KXE10110) for quick and easy wear identification of concaves, threshing elements and separator tines.
DESCRIPTION SERIES PART NUMBER
TRISTREAM ROTOR (PACKAGE OF 3)
Smooth threshing elements
1st row
S-Series
AH216674
2nd row AH216675
3rd to 5th row AH216677
VARIABLE STREAM ROTOR (PACKAGE OF 3)
Threshing element
normal wear, grain
S-Series
KXE10034
high wear, grain KXE10035
high wear, rice KXE10036
high wear, spike rice KXE10143
Threshing tine wear plates
normal wear, grain KXE10048
standard high rice KXE10049
tall rice KXE10142
DESCRIPTION SERIES PART NUMBER
RASP BAR SET (PACKAGE OF 2)
Left-hand side1450/1470
DQ43066
Right-hand side DQ43067
Left-hand side1550/1570
DQ43064
Right-hand side DQ43065
One left-hand side, one right-hand side
205X, 225X AZ47216
206X, 226X AZ47217
95XX WTS, 9780CTS, W5X0, T5X0
AZ58904
96XX WTS, W6X0, T6X0
AZ58905
CHROMED RASP BAR SET (PACKAGE OF 5)
Left-hand side95XX WTS, 9780CTS, W5X0, T5X0
AH205119
Right-hand side AH205120
Left-hand side96XX WTS, W6X0, T6X0
AH205124
Right-hand side AH205125
WA L K E R C O M B I N E S – T H R E S H I N G PA R T S : R A S P B A R S
The rasp bar is the key threshing component – it separates the grain from the rest of the plant. Genuine John Deere rasp bars undergo deeper heat treatment to make them more durable. For optimum threshing performance replace rasp bars with less than 6 mm profile on the maximum position.
Usage of KXE10110
40
Combine PartsAttachments
Lower cost of operation – Longer service intervals: more time
to harvest – Cheaper parts: up to 30% cost savings
More uptime – Fewer parts: 27% fewer belts than
competition – Durable parts: reduced risk
of breakdown
Better performance – Unique design: special rubber mix
and aramid cords – Heavy duty: long lifetime and
maximum power transmission
BELTS
Genuine John Deere Belts last 6x longer than some look-alike alternatives. The special rubber mix and aramid cord of the belts transmit maximum power without stretching.
K E Y B E N E F I T S O F G E N U I N E J O H N D E E R E B E LT S :
Front end driveS-Series MY12+ (Heavy Duty) HXE95935
S-Series MY12+ (Levelland only, 5 Speed) H229018
Rotor driveS-Series MY12+ (Heavy Duty) HXE63990
S-Series MY12+ (Standard) HXE46027
Cleaning shoe drive S-Series MY12+ H175587
Discharge beater drive XFC Chopper AH236689
W/ T- S E R I E S
S - S E R I E S
41
Combine PartsAttachments
Lower cost of operation – Longer service intervals because the
filter design reduces engine wear by more effectively removing pollutants from intake air
More uptime – The even-pleat design and stronger
filter media protect your hydraulic systems from component wear and hydraulic surge flow
Better performance – Specially coated filter media keeps
out water to prevent rust and microbial growth
– Our filters trap particles the size of one fifth of the width of a human hair
FILTERS
Choose only genuine John Deere filters – our tests show that some will-fit filters let up to 100 times more dirt pass through to the engine or into the oil.
K E Y B E N E F I T S O F G E N U I N E J O H N D E E R E F I LT E R S :
9000WTS (SN078556+), W, T, C (-MY16 (-SN121999)) AL203061
Breather oil reservoir W330/W440 5SR0499810
SCR FILTERS
Supply module main filterW330/W440
5AP837079423
Supply module pre-filter 5AP837079430
42
Combine PartsAttachments
Z103205
Z75874
S AV E T I M E , S AV E M O N E Y
With genuine John Deere Chopper Knives you’ll
... reduce operational costs*
... increase chopping performance
... boost overall machine performance and
... minimize the risk of downtime
BUILT FOR MAXIMUM CHOPPING PERFORMANCE
Addi
tiona
l Fue
l Con
sum
tion
[l/
h]
Harvested Area [ha]
875
12
16
8
4
175 350 525 700
Keep combine operation costs low and performance high – use the chopper knife calculator.
C H O P P E R K N I V E S
DESCRIPTION SERIES PART NUMBER
Straight knife (set of 8)STS, S690 MY11
AH213457
Wing blade (set of 8) AH213459
Straight knife (set of 8) S-Series MY12+
KXE10256
Wing blade (set of 8) KXE10363
Stationary knife STS, S-Series H215004
Standard chopper serrated and rotary knife 2000, 2200, CTS, 9780CTS,
9000WTS, W/T-Series, 1x50, 1x70
Z77601
Standard chopper smooth and rotary knife
Z53454
Standard chopper serrated and stationary knife
2000, 2200, CTS, 9780CTS, 9000WTS, W/T-Series
HXE13024
Standard chopper smooth and stationary knife
HXE13023
Standard corn smooth knife Z42176
Premium chopper serrated and rotary knife
9780CTS, 9000WTS, W/T-Series
Z103205
Premium chopper smooth and rotary knife
Z103376
Premium chopper stationary knife Z75874
Premium corn serrated knife Z105500
Premium corn smooth knife Z105550
Stationary knife1x50, 1x70 CF01601
W440, W3305SR0480917
Rotary knife 5SR0481051
* The chart compares additional fuel consumption with the cost of new chopper knives. Make sure you replace the chopper knives regularly to lower fuel costs and put all available power towards the threshing process.
JOHN DEERE PARTS LOGISTICS:
WE’LL KEEP YOU MOVINGWhen you need a part, you need it fast. Your dealer keeps most of them in stock. For everything else, the professional John Deere logistics network brings it in promptly. You can count on it.
Scan the code to see a short video about our European Parts Distribution Center (EPDC).
Combine PartsAttachments
44
ENHANCE YOUR MACHINE
I N T E G R AT E D T O O L B OX C O M PA R T M E N T
Get additional storage for your toolbox and other parts with the dedicated compartment designed for S-Series combines. This compartment consists of two storage spaces and can be mounted on the Left-hand side of your combine.
SERIES PART NUMBER
S-Series MY12+ BXE10801
45
Combine PartsAttachments
AC T I V E Y I E L D C O N V E R S I O N
If an operator would rather be harvesting grain or stop calibrating the yield monitor system, Active Yield will maximize the system’s accuracy with no effort or time away from your harvest. Every field, every variety Active Yield will be there delivering quality yield data.
SERIES PART NUMBER
S-Series MY17+ BXE10797
S-Series MY12-MY16 BXE10503
D UA L R A N G E FA N D R I V E
The fan drive is optionally available in a dual range version. All key crops such as small grain, rape, corn, sunflowers, or peas and beans can be harvested with the standard drive design which provides an adjustment range from 550-1,350 rpm. The optional dual-range fan drive provides two speed ranges and is recommended for special crops such as grass seed:
Standard: 550-1,350 rpm Slow speed: 300-600 rpm
BXE10624
DESCRIPTION SERIES PART NUMBER
Kit with Advanced Power-Cast Retrofitable back to MY 12 premium residue
BXE10946
Kit with vane tailboard BXE10947
S T R AW B U M P E R K I T F O R P R E M I U M R E S I D U E
The straw bumper kit for the premium residue smooths the straw flow out of the S-Series Combine equipped with premium residue system. The kit improves your straw quality by creating a fluffier swath which dries faster, with improved baleability of the straw.
A D J U S TA B L E W I N D R OW D E F L E C T O R R A K E
With the quick adjustable deflector rakes the windrow width can be set between 64-142 cm (25.2 in.- 55.9 in.) on a 5 Walker Combine and 91-170 cm (35.8 in.-66.9 in.) on a 6-Walker combine depending on the baler’s pickup width. That is especially practical for farmers or contractors who use different baler types.
BXE10622
46
Combine PartsAttachments
T O P B E A M D E F L E C T O R F O R 6 0 0 R A N D 6 0 0X This metal sheet is on top of the usual 600R / 600X frame and helps reduce back wall header losses in tall crops. Especially in rape seed, the top beam reflector has an advantage as it keeps the light rape cereals in the header and increases the operator’s daily output. The bent top edge prevents grain from exiting the rear wall.
MODEL PART NUMBER
600R
622R BXE10264
625R BXE10267
630R BXE10268
635R BXE10269
600X
600X centre element KXE10492
622X (only centre element) KXE10492
625X (2 pieces needed) HXE124253
630X (2 pieces needed) HXE124254
635X( 2 pieces needed) HXE124256
640X (2 pieces needed) HXE124257
S I D E H I L L K I T When operating the machine on slopes, it is recommended to order the side hill kit in addition or in combination with the high-performance chaffer elements. The side hill kit includes extended divider bays for the chaffer to ensure material is captured in each bay and cannot move to the downhill side when operating on side slopes. A set of five dividers is used on 6 Walker Combines and three dividers for the 5 Walker Combines. The side hill kit ensures level-land performance of the cleaning shoe in up to 7% grades.
SERIES PART NUMBER
W/T-Series5 walker BXE10710
6 walker BXE10711
S M A L L T R A I L E R A DA P T I O N The adaptor kit is available on 18.5-foot augers and above. A steel adaptor is placed between the unloading auger tube and the plastic boot and provides an additional angle of approximately 15°.
SERIES PART NUMBER
W/T-Series (18.5 foot augers and above) BXE11001
Did you know that genuine John Deere cutterhead knives feature high-quality large grain tungsten carbide coating with superior bonding? It’s why they are more wear resistant and last longer than the look-alike competition. It adds up to less maintenance and lower running costs.
YO U W I L L F E E L T H E D I F F E R E N C E
DON’T RISK IT
Thinking about risking it anyway? These guys might change your mind – watch this.
48
SPFH PartsAttachments
P E R F O R M A N C E T H AT L A S T S
SPFH PARTS AND ATTACHMENTSKeep up the good work. Your John Deere Forage Harvester lets you deliver top notch service and silage quality to your customers. Keep it that way by using only genuine John Deere parts and attachments.
49
SPFH PartsAttachments
1
2
3
5
4 44
CUTTERHEAD KNIVES: WHY OURS LAST LONGER
The cutterhead plays a critical role in forage harvester performance. Which is why it’s so important to choose knives that fit, perform and last. John Deere Cutterhead Knives are made for that – manufactured specifically for your John Deere Forage Harvester.
4 | Extended knife body supports retraction on object impact.
2 | Induction-hardened cutting zone stays sharp longer.
3 | Tough body minimises breakage risk.
5 | Trademark identifies the genuine John Deere Knife.
Genuine John Deere Knives stay sharper for longer. Tough tungsten carbide coating means high quality cutting, longer life and lower fuel consumption.
D U R A L I N E G R A S S K N I V E S (70 0 0 S E R I E S S P F H)
For longer wear life, install the Dura Line Grass Knife with 33% wider chopping edge coating on the 7000 Series SPFH. They’re standard on 8000 Series SPFH.
E X T R A S T O N E P R O T E C T I O N
We use four rows of knives which retract when they come into contact with foreign objects. The design protects the rotor from damage and reduces downtime.
Knife travel 20 mm
50
SPFH PartsAttachments
C U T T E R H E A D K N I V E S
DESCRIPTION QUANTITY PER CUTTERHEAD ROTOR
SERIES PART NUMBER
6000 AND 7000 SERIES SPFH
Corn, straight 40/48/56
6000, 7200-7500, 7250-7550 and 7180-7580
Z63136
Corn, angled RH20/24/28
Z62075
Corn, angled LH Z62076
Grass, standard
40/48/56
Z69500
Grass, Dura Line Z102741
Corn7700-7800, 7750-7950 and 7780-7980
Z72500
Grass, standard Z81123
Grass, Dura Line Z103040
8000 AND 9000 SERIES SPFH
Corn, Dura Line
40/48/56/64
8100-8500 (up to MY18) 8100-8600 (from MY19)
HXE53570
Grass, Dura Line HXE53568
Corn, Dura Line 8600-8800 (up to MY18) 9600-9900 (from MY19)
HXE52950
Grass, Dura Line HXE52933
S H A R P E N I N G S T O N E S
Only John Deere sharpening stones meet our original equipment specifications for coarseness and bonding. Look-alike alternatives often exhibit a weaker sharpening stone/carrier plate bond and can cause extensive damage.
DESCRIPTION SERIES PART NUMBER
Sharpening stone
6010 and 6050 (-504991) AZ53747
6050 (504992-), 7000, 7050 and 7080 AZ56626
8000 and 9000 AXE17437
K N I F E F I X I N G PA R T S
DESCRIPTION SERIES PART NUMBER
6000 AND 7000 SERIES SPFH
Knife cover plate 6000, 7200-7500, 7250-7550 and 7180-7580
Z60535
Nut bar Z71196
Knife cover plate 7700-7800, 7750-7950 and 7780-7980
Z76801
Nut bar HXE29392
Knife bolt 6000, 7000, 7050 and 7080 Z69650
8000 AND 9000 SERIES SPFH
Knife cover plate 8100-8500 (up to MY18)8100-8600 (from MY19)
HXE120441
Nut bar Z71196
Knife cover plate 8600-8800 (up to MY18)9600-9900 (from MY19)
HXE119923
Nut bar HXE29392
Knife bolt 8000 and 9000 HXE29393
HXE53570
HXE53568
AXE17437
HXE29393
Z71196
HXE53571
51
SPFH PartsAttachments
N OW H E R E E L S E
Dura Line Plus Components are exclusive to John Deere and only available from John Deere Dealers.
Finally, a longer-lasting shearbar. The Dura Line Plus Shearbar has been developed using new coating technology – hard metal plates – which have been proven in challenging environments like mining and machine tooling. Replace it less often – work more.
D U R A L I N E P L U S S H E A R B A R S O F F E R :
– Real ALL-CROP capability – Minimum three times the wear life of standard shearbars – Minimum shear gap to reduce knife wear
Learn how new Dura Line Plus Shearbars can keep you productive in the field longer. Talk to your John Deere Dealer today.
ONE SHEARBAR. EVERY CROP. ALL SERIES. DURA LINE PLUS FROM JOHN DEERE
52
SPFH PartsAttachments
HXE64652
S H E A R B A R S
DESCRIPTION SERIES PART NUMBER
6000 AND 7000 SERIES SPFH
Corn, Standard
Shearbar kit for 6010
AZ47614
Corn, Dura Line AZ50122
Grass AZ103105
Corn, StandardShearbar kit for 6050, 7200-7500, 7250-7550 and 7180-7580
AZ53906
Corn, Dura Line AZ57685
Grass AZ103112
Corn, Standard
Shearbar kit for 7700-7800, 7750-7950 and 7780-7980
AZ64735
Corn, Dura Line AZ64737
Grass AZ103113
All Crop, Dura Line PlusShearbar for 6050, 7000, 7050 and 7080 AXE37631¹
Shearbar for 7700-7800, 7750-7950 and 7780-7980 AXE37632²
8000 AND 9000 SERIES SPFH
Corn 8100-8500 (up to MY18)8100-8600 (from MY19)
HXE101352
Grass HXE101351
Corn 8600-8800 (up to MY18)9600-9900 (from MY19)
HXE101350
Grass HXE101349
Dura Line Plus ShearbarGrass Shearbar Maize Shearbar
F E E D R O L L B A R S
DESCRIPTION QUANTITY PER ROLL SERIES PART NUMBER
6000 AND 7000 SERIES SPFH
Serrated steel bar for upper roll8
6000, 7200-7500, 7250-7550 and 7180-7580
HXE64649
Smooth steel bar for upper roll HXE64652
Kit of 8 serrated bars for up.roll1
AZ102097
Kit of 8 smooth bars for up.roll AZ102098
Serrated steel bar for upper roll8
7700-7800, 7750-7950 and 7780-7980
HXE64650
Smooth steel bar for upper roll HXE64653
Kit of 8 serrated bars for up.roll1
AZ102099
Kit of 8 smooth bars for up.roll AZ102100
8000 AND 9000 SERIES SPFH
Reversible steel bar for upper roll10
8100-8500 (up to MY18)8100-8600 (from MY19)
HXE93580
Plastic strip for upper roll HXE87701
Reversible steel bar for lower roll 12 HXE100098
Kit of 12 revers. bars & screws for lower roll 1 BXE10585
Reversible steel bar for upper roll10
8600-8800 (up to MY18)9600-9900 (from MY19)
HXE93575
Plastic strip for upper roll HXE87459
Reversible steel bar for lower roll 12 HXE100097
Kit of 12 revers. bars & screws for lower roll 1 BXE10742
¹ 1xPTFE strip Z49449 and 2xE72350 PTFE shim are required for installation² 1xPTFE strip Z72486 and 2xE72350 PTFE shim are required for installation
53
SPFH PartsAttachments
LCA109994
LCA87284
LCA67156
LCA67316
MORE QUALITY FOR LESS: HIGH EFFICIENCY PARTS FOR ALL HEADERS
Never compromise on fit and quality and eliminate in-season down-time for good. Insist on our extra long-life Dura Line parts, tailor-made exclusively for John Deere Harvesters.
C OAT E D S E R V I C E K I T F O R R O TA R Y H E A D E R D R U M
DESCRIPTION HEADER TYPE PART NUMBER
Service set per rotary header drum
445, M4500LCA109994
LCA109995
460, 460plus, 475, 475plus LCA89940
475, 475plus LCA98800
300, 300plus LCA79040
S C R A P E R S F O R R O TA R Y H E A D E R S
DESCRIPTION HEADER TYPE PART NUMBER
Scraper for rotary headers
445, M4500 LCA69794
300 LCA87284
300plus LCA109129
460 LCA86063
460plus, 475, 475plus LCA95370
R O TAT I N G S C R A P E R S F O R R O TA R Y H E A D E R S
C L U T C H E S / S H I F T C O L L A R S F O R R O TA R Y H E A D E R S
DESCRIPTION HEADER TYPE PART NUMBER
Outer clutchM4500
LCA67316
Inner clutch LCA67317
Clutch 300 Series LCA69654
54
SPFH PartsAttachments
LCA90654
LCA105173
LCA108554
P O I N T S F O R R O TA R Y H E A D E R S
DESCRIPTION HEADER TYPE PART NUMBER
Point, clockwise rotation330, 345, 360/M 6008 and 375/M7510
LCA90654
Point, anti-clockwise rotation LCA90655
P I C K U P W E A R PA R T S
DESCRIPTION HEADER TYPE PART NUMBER
Spring Tooth 6XXC, 6X9 LCA105173
Spring Tooth Heavy duty Heavy duty picking unit LCA108554
Upgrade processing intensity and wear life of your 8000 Series SPFH with the USA heavy-duty configuration, featuring Dura Line roll:
– Rear roll reverse installed to increase aggressiveness – 32% roll speed differential instead of 24% on standard KP configuration
DESCRIPTION SERIES PART NUMBER
Dura Line Saw teeth (118), corn (front & rear) 8100-8500 (up to MY18)
8100-8600 (from MY19)
AXE43639
32% speed differential pulley HXE83757
Dura Line Saw teeth (118), corn (front & rear) 8600-8800 (up to MY18)
9600-9900 (from MY19)
AXE43492
32% speed differential pulley HXE83756
Triangle Standard | For standard maize conditions
Saw Tooth Standard | For maize – provides higher aggressiveness
Saw Tooth Dura Line | For maize – provides increased lifetime due to the hard chroming
DESCRIPTION SERIES PART NUMBER PART NUMBER
6000 AND 7000 SERIES SPFH UPPER OR FRONT
LOWER OR REAR
Triangular teeth (107) 6000, 7200-7500, 7250-7550 and 7180-7580 Series
AZ102631 AZ102631
Saw teeth (107), corn AZ101800 AZ101800
Dura Line Saw teeth (107), corn AZ101376 AZ101376
Triangular teeth (118), corn 7700-7800, 7750-7950 and 7780-7980 Series
AZ102632 AZ102632
Saw teeth (118), corn AZ102602 AZ102602
Dura Line Saw teeth (118), corn AZ101377 AZ101377
8000 AND 9000 SERIES SPFH
Standard Saw teeth (118), corn 8100-8500 (up to MY18) 8100-8600 (from MY19)
AXE43571 AXE43572
Dura Line Saw teeth (118), corn AXE43639 AXE43640
Standard Saw teeth (118), corn 8600-8800 (up to MY18) 9600-9900 (from MY19)
AXE43163 AXE43182
Dura Line Saw teeth (118), corn AXE43492 AXE43493
K E R N E L P R O C E S S O R R O L L S (C O R N)
N E W
55
SPFH PartsAttachments
HXE71450 HXE37067
J O H N D E E R E K E R N E L P R O C E S S O R R O L L S
John Deere kernel processor rolls are known for their excellent processing performance and high durability. A kernel processor benchmark was conducted in summer 2017 to compare a John Deere KP chromed roll with an aftermarket competitor KP roll. Both rolls were removed and evaluated in a lab:
– The chrome coating thickness was the same on both rolls – The shaft hardness of the John Deere genuine roll is 40%
higher compared to the aftermarket competitor roll – The tooth hardness of the John Deere genuine roll is about
double compared to the aftermarket competitor roll – Further analysis of the hardening zones in a cut cross
section revealed huge differences in hardening penetration and tooth stability
DESCRIPTION APPLICATION QUANTITY PER BLOWERROTOR
SERIES PART NUMBER
6000 AND 7000 SERIES SPFH
Kit of straight paddles 12 x straight paddles and screws for classic blower
1 6000, 7200-7500, 7250-7550 (-511705)
AZ53486
Straight paddle Classic blower in normal conditions 20 7700-7800, 7750-7950 (-511705)
Z81874
Serrated paddle Classic blower in sticky conditions 12 or 20 6000 and 7000 (-511705)
Z105309
Straight paddle
High performance blower
normal conditions 8 7250-7550 (511706-) and 7180-7580
HXE29868
Serrated paddle LH in sticky conditions LH4
HXE34827
Serrated paddle RH in sticky conditions RH HXE34828
Straight paddle normal conditions 10 7750-7950 (511706-) and 7780-7980
HXE29814
Serrated paddle LH in sticky conditions LH5
HXE34825
Serrated paddle RH in sticky conditions RH HXE34826
8000 AND 9000 SERIES SPFH
Straight paddle Normal conditions 10 8100-8500 (up to MY18)8100-8600 (from MY19)
HXE37067
Serrated paddle RH Sticky conditions RH5
HXE71450
Serrated paddle LH Sticky conditions LH HXE71452
Straight paddle Normal conditions 10 8600-8800 (up to MY18)9600-9900 (from MY19)
HXE29814
Serrated paddle RH Sticky conditions RH5
HXE34825
Serrated paddle LH Sticky conditions LH HXE34826
John Deere
Competition
B L OW E R PA D D L E S
56
SPFH PartsAttachments
DURA LINE PARTS HIGH WEAR RESISTANCE LAST MIN. 4X LONGER
Eliminate in-season downtime and upgrade SPFH’s profitability by investing in Dura Line extra long-life components.
U N I Q U E , U N R I VA L L E D T E C H N O L O G Y
The mixed carbide and boride coating of Dura Line Components combine to form an ultra-hard-wearing surface which only two furnaces in Europe have the technology to produce.
U N R I VA L L E D P E R F O R M A N C E
The incredibly hard coating of Dur Line Parts also produces a high self-cleaning effect that reduces crop residue build-up, which is particularly useful in high sugar content crops like first cut grass.
U N R I VA L L E D VA L U E F O R M O N E Y
With Dura Line Components, you save a lot more than you spend. Although they cost more than conventional premium John Deere Parts, Dura Line Parts last a minimum of 4x longer and significantly minimise the risk of in-season downtime.
T E C H N O L O G Y A DVA N TAG E L OW E R M A I N T E N A N C E C O S T S
Front chute AXE41413 AXE46841 (front) AXE46840 (rear)
Front chute side liner right hand HXE28378 HXE59380
Front chute side liner LH HXE28379 HXE59388
Grass chute AXE37919 AXE35696
Blower band AXE41235 AXE42112
Spiral band
8600-8800 (up to MY18)9600-9900 (from MY19)
AXE41319 AXE68140
Front chute AXE41414 AXE46843 (front) AXE46842 (rear)
Front chute side liner RH HXE34306 HXE45292
Front chute side liner LH HXE34307 HXE45291
Grass chute AXE36570 AXE29033
Blower band AXE35811 AXE42114
1st Spout liner
8000 and 9000
HXE43969 HXE47058
2nd Spout liner w/o Harvest Lab AXE28058 AXE29779
2nd Spout liner w/ Harvest Lab – AXE29053
Middle flap AXE52630 AXE55603
End flap AXE68374 AXE68375
Flap liner for middle and end flap MY15 8000 AXE13903 – – –
R E G U L A R A N D D U R A L I N E W E A R L I N E R S
In a process called sintering, the tough wear coating made of ultra-hard carbides is fused to the iron base material to create Dura Line parts that last a minimum of 4x longer than standard parts.
58
SPFH PartsAttachments
13
45
7
6
11
12
9
10
14
2
3
81
FILTER OVERVIEW
Choose only genuine John Deere filters – our tests show that some will-fit filters let up to 100 times more dirt pass through to the engine or into the oil.
Scan the code to see a short video explaining why genuine oil filters are superior.
DESCRIPTION PART NUMBER
ENGINE
1 DEF Suction Filter (only 8000 series)
DZ110562
2 DEF Tank Vent Filter H216169
3 DEF Dosing Unit Filter (only 8000 series)
RE554498
4 Main Air cleaner
HXE43545 (9 L)
HXE60966 (13.5 L)
AZ104110 (19 L) up to MY18
2 x HXE43545 (24 L) from MY19
5 Safety Air cleaner
HXE43546 (9 L)
HXE60967 (13.5 L)
AZ104111 (19 L) up to MY18
2 x HXE43546 (24 L) from MY19
6 Engine Oil Filter
RE509672 (9.0 L)
RE572785 (13.5 L)
2 x RE574468 (19 L) up to MY18
LW11427521 + 2 x LW11356735 (24 L) from MY19
DESCRIPTION PART NUMBER
7 Fuel Filters
RE525523 (9 L T2)
RE533910 + RE532952 (13.5 L T2)
RE533910 + RE539465 (9 L & 13.5 L FT4)
RECFS1976300 + 2 x RECFF0578200 (19 L) up to MY18
BASIC HYDRAULIC
8 PTO Gearbox Filter Element
AXE27449
9 Hydraulic System Tank Filter Element
AXE27447
PRODRIVE ONLY
10 ProDrive Transmission Oil Filter Element
AXE27449
CAB
11 Recirculation Air Filter
L214634
12 Air Filter RE284091
ADDITIVE DOSING SYSTEM
13 High Volume ADS Filter
AXE38488
14 Nozzle Filter AXE38496
(here complete filter units are shown)
59
SPFH PartsAttachments
K E R N E L P R O C E S S O R S
DESCRIPTION APPLICATION PART NUMBER
7000 SERIES SPFH
Crane For Kernel Processor or KernelStar installation BXE10040
Central Lubrication for Kernel Processor
To transform manual lubrication into central lubrication
BZ13798
8000 SERIES SPFH
Crane for KP SPFH 8000 Series
Required to mount Kernel Processor or KernelStar kit
BXE10608
C U T T E R H E A D B A N D R E C U T T E R S C R E E N K I T
With a heavy maize harvesting season appoaching, there‘s no better way to prepare than by installing John Deere “quick-change” knives, which are easy to install and feature a highly resilient tungsten carbide coating. They also help you to reduce long leaves in dry maize conditions.
DESCRIPTION SERIES PART NUMBER
Cutterhead band recutter screen kit
8100-8500 (up to MY18) 8100-8600 (from MY19)
BXE10542
8600-8800 (up to MY18) 9600-9900 (from MY19)
BXE10543
H A R DWA R E M O U N T I N G R A I L
The external hardware mounting rail is mounted on the right side of the armrest over the entire width of the side window. Operators can install displays, smartphones or even tablet computers on the rail to keep the cab tidy and well organised.
DESCRIPTION SERIES PART NUMBER
Mounting rail
8000 and 9000 Series SPFH and W, T, S-Series Combines from MY12
B E LT FA S T E N E R The pressures within your baler can force lesser belt splices to pull out or rip the belt. But in our plate-type splice, each segment is riveted into the belt and the splice is secured with a notched spring steel pin. Tough enough for any harvest season.
B U L K B E LT S F O R R O U N D B A L E R The most cost-efficient way to re-belt your John Deere round baler – bulk belting. It’s priced by the metre so you can purchase as much or as little as you want. All you need now are the joiners.
DESCRIPTION SERIES PART NUMBER
Pin and hook (6 units)
All round balers
DC45799
Hand Punch MC411295825
Belt Skiver 18 MC411295827
U20 Vice Lacer John Deere 14 MC411295869
U20 Vice Lacer John Deere 5 MC411295871
Connecting Pin E86147
Portable Belt Cutter MC464300012
DESCRIPTION SERIES PART NUMBER
50 m roll bulk beltAll round balers
AFH202038
100 m roll bulk belt AFH202039
Your baler needs to be in prime shape for the harvesting season, where every hour of productivity counts. Only John Deere Genuine Parts and Attachments will make sure you get the peak performance and maximum durability your business depends on.
BALER PARTS AND ATTACHMENTS
G E T YO U R B A L E R I N S H A P E
61
Baler PartsCrop Packaging
1
2
3
4
5
B A L E R B E LT S
Longer life and best performance: Diamond tread baler bulk belts for round balers – it’s the most cost-efficient way to re-belt your John Deere Round Baler. Priced by the metre, so you can get just as much as you need. All you need now are the joiners.
DESCRIPTION LENGTH QUANTITY SERIES PART NUMBER
Short 13.07 m 2592, 854, 862, 864
DC200782
Long 13.21 m 4 DC200783
Short 10.23 m 2572, 842
DC45786
Long 10.42 m 4 DC45787
Short 11.71 m 2582, 852
DC45784
Long 11.85 m 4 DC45785
Short 11.45 m 2854
DC200784
Long 11.59 m 4 DC200785
Standard10.96 m
2 960CC125212
12.70 m CC126215
DESCRIPTION LENGTH SERIES PART NUMBER
50-1R3.05 m
All round balers
SW50X10US
60-1R SW60X50US
60H-1R 10 m DC46571
80-1R 010 3.05 m SW80X10US
R O U N D B A L E R B U L K C H A I N S : E XC E P T I O N A L VA L U E F O R M O N E Y
John Deere makes it easy to keep your chains in top working order. Complete chains can be assembled from chain coils of 3.05 m, 15.24 m or 30.48 m, using a connector link and genuine chain tools. It’s the most cost-effective way to re-chain a John Deere Round Baler and many other heavy duty applications.
1 | First layer of nylon and polyester fabric provides added strength to the belt carcass.
2 | Four protective rubber mats seal the separate layers of nylon and polyester fabric.
3 | Nylon fabric in the centre runs lengthwise to prevent stretching under heavy load.
4 | All layers are vulcanized through a special process.
5 | Flat inside layer glides smoothly over rollers without heat build-up.
P R E- C U T T E R
Sharp knives minimise stress on your machine, reduce power requirements and reduce fuel consumption. Because they cut cleanly, they decrease torque loads on drivelines by up to 30%* and use up to 10%* less fuel, for a solid contribution to your bottom line.
John Deere Pick Up Teeth offer up to 47% greater wear life than competitive teeth. John Deere Pick Up Teeth are shot-peened to resist bending and breaking and have five coils; most competitive teeth only have four coils. Many competitive teeth do not have the same shape, form or deflection and cause feeding problems.
The humidity sensor is mounted in the bale case of the baler and measures the moisture of the baled crop. The humidity sensor kit is connected to the baler electronic system and the moisture readout is displayed on the baler monitor home screen.
Pick up teeth L1433, 1433C, L1524, L1533, L1534 FH324064
Bill hook (assembly)L1524, L1533, and L1534
AFH212461
Trigger AFH212462
S PA R E K N I V E S S E T
The set consists of 15 knives that fit the 2016 model HC15 MaxiCut machines exclusively and keeps you ready to bale at all times.
DESCRIPTION SERIES PART NUMBER
Knotters service kit – single-tie1424, 1424C, 1433, 1433C, 1434, and 1434C
AFH215908
L1524, L1533, and L1534 AFH215907
K N O T T E R S S E R V I C E K I T
This kit is like a first-aid kit, but for the tying device. It contains the most important parts that need to be inside the service box of the baler. All the parts are packed in a compartmented box with identification tags.
DESCRIPTION SERIES PART NUMBER
Weighting deviceL1533 AFH215601
1424, 1424C, L1524 and 1534 AFH215602
W E I G H I N G D E V I C E
Get instant real-time bale weight data on your display – last bale weight, average bale weight, and the current weight on the bale chute. Also shows session data like accumulated bale weight.
LARGE SQUARE BALER PRODUCTS
64
Baler PartsCrop Packaging
Bale
den
sity
J O H N D E E R E B - W R A P No more storage loss. B-Wrap keeps bales dry by keeping moisture out while vapour can escape and nutrients are protected. Ask us about baler model compatibility.
JOHN DEERE XTRATWINE PLUS This new twine range combines the high performance of standard twine with a big increase in pack length. Save money, save time and work more efficiently.
X T R AT W I N E H D P L U S – PAC K L E N G T H 26 0 0 M Designed for use in balers and applications where extremely dense bales are required, or when baling in extreme conditions such as high temperatures and low humidity.
X T R AT W I N E P L U S – PAC K L E N G T H 2 8 0 0 M The best performing option for all crops and balers where high density is required. Use it for silage and for high density hay and straw bales.
X T R AT W I N E L O N G – PAC K L E N G T H 3 0 0 0 M A longer option for standard density hay, straw or silage bales.
X T R AT W I N E M A X – PAC K L E N G T H 32 0 0 M Maximum length for use in all crops and balers where higher density is not needed.
J O H N D E E R E X T R A F I L M S T R E T C H W R A P Clings better, protects better. Now longer. John Deere XtraFilm baler wrap guarantees maximum performance backed by a team you trust.
J O H N D E E R E X T R A N E T + Only John Deere netwrap is designed specifically for your John Deere baler. New and uniquely strong, the XtraNet+ formula will reliably deliver all-day trouble-free baling.
J O H N D E E R E C OV E R E D G E CoverEdge netwrap’s unique elasticated edge threads extend the net over the edge of the bale for better bale protection and eliminating bale “shoulders”. Available exclusively from John Deere dealers.
65
Baler PartsCrop Packaging
MCXFA1871 MCXFA1910 MCXFA1870MCXFA1872
MCXFA2157
MCXFA1172 MCXFA1168
MCXFA2158
According to agricultural nutrition experts, moisture is the single most important factor that determines hay quality.
HAY MOISTURE TESTERS
W I N D R OW H AY M O I S T U R E T E S T E R – B E F O R E B A L I N G
Now test hay before you even start baling with the portable Windrow Hay Moisture Tester from John Deere. You no longer have to make a bale and use a probe-style tester to determine whether your hay is ready.
MCXFA1871
B A L E R M O U N T E D H AY T E S T E R – D U R I N G B A L I N G
Baler Mounted Hay Moisture Testers let you monitor hay moisture levels as it is being baled. Advanced multi-sensor technology for greater overall accuracy. For square and round balers.
MCXFA1910
H AY M O I S T U R E T E S T E R – A F T E R B A L I N G
Easily test hay moisture after baling and before barn storage with a handheld probe tester.
MCXFA1872 | 45 cm Probe Pistol-grip Tester (moisture range: 14 to 44%)
MCXFA1870 | 50 cm Probe Tester including calibration clip (moisture range: 8 to 44%)
Branded silage patch, specially designed for repairing silage bags, sheets and wrap. Highly adhesive to polythene and useful in many other applications.
DESCRIPTION PART NUMBER
Black colour, 100 mm x 33 m MCXFA1172
White colour, 100 mm x 33 m MCXFA1168
DESCRIPTION PART NUMBER
Size: 100 x 150 mm, approx. 130 patches/roll MCXFA2157
Size: 150 x 150 mm, approx. 130 patches/roll MCXFA2158
66
JOHN DEERE MOWER CONDITIONER GENUINE PARTS
CLEAN CUTTING Designed specifically for our machines, John Deere Mower Conditioner Knives provide premium cutting and conditioning quality. They are made from boron steel with enhanced impact resilience. Their toughness allows these knives to bend rather than break, and no breakage means there’s no steel in the forage, making it safe for your livestock. John Deere Knives have been specifically designed for optimal wear resistance, so they will stay sharper for long-term cutting quality. Our corrosion resistant powder coating prevents rust, and keeps cutting power consumption to a minimum.
DESCRIPTION SERIES PART NUMBER
Knife – right hand end 131, 1355, 1365, 1465, 324, 328, 331, 530, 535, 730, 735, 324A, 328A, 381, 388, 488, 630, 635, 830, 835
FH304879
Knife – left hand end cutterbar
FH304880
S U P E R I O R W E A R A N D R U S T R E S I S TA N C E
Look-alike varnish protected
Genuine
Before testing Before testing
After 20 h in salty fog
Look-alike Genuine
After 48 h in salty fog
Grinding process
Before cold forming
After cold forming
67
Seeding
Work smarter, not harder. Genuine John Deere attachments, parts and technology are engineered to improve your planter’s performance, so that you can get your seed investment in the ground faster and more accurately.
DESCRIPTION SIZE PART NUMBER
Premium Seed Talc 12 kg MCB105
DESCRIPTION SIZE PART NUMBER
Powdered Graphite 1.4 kg MCB160
P R E M I U M S E E D TA L C
Seed coating for vacuum meters to minimize buildup of gummy deposits on seed disks and seed cups caused by seed treatment and high humidity. It improves seed distribution and spacing.
P OW D E R E D G R A P H I T E
Designed for use with finger pickup seed meters, it gives you trouble-free, easier operation, less wear and high planting speeds.
PLANTING AND SEEDING PARTS AND ATTACHMENTS
68
Seeding
A52391
AA37221
AA55927
A53272
T R U -V E E O P E N E R
Positive seed/soil contact at the desired planting depth helps to improve germination. John Deere Tru-Vee opener Diamond Series blades are designed to cut a trench precisely to the selected depth. They slice out a V-shaped trench to trap seed into positive contact with firm soil. The opener blades’ special beveled edges make penetration easy, improve seed placement accuracy, and form consistent seed furrows while minimizing soil disruption and moisture loss.
K N O C K E R A S S E M B LY
The knocker assembly must be working freely to ensure proper seed flow.
DESCRIPTION SERIES PART NUMBER
Knocker assembly
All planters
A53272
Knocker – sugarbeets/sorghum AH129125
Knocker – ProMax 40 AA37348
T R U -V E E R O TA R Y S C R A P E R
In sticky or moist soil conditions, scrapers are needed to keep soil from building up on the Tru-Vee opener blades. Check for excessive wear, which allows soil buildup resulting in irregular seed furrow shape and possible opener system plugging.
DESCRIPTION SERIES PART NUMBER
Tru-Vee rotary scraper Drills and MaxEmerge 2 and MaxEmergePlus Planters
AA37221
Tungsten carbide scraper assembly 1700 Series Planters AA62808
DESCRIPTION SERIES PART NUMBER
Tru-Vee opener (3 mm) AA55927
Tru-Vee opener (3.5 mm)
AA53860
Heavy-duty blade with XP double-row bearingretrofit for John Deere ME2 and ME+
AA65457
3.5 mm heavy duty blade W/ double-row bearing for XP and EE row-unit
AA65248
Stud kit for blade retrofit for ME2 and ME+ AA66947
DESCRIPTION SERIES PART NUMBER
ProMax 40*All planters
A52391
Additional seed disks ** – –
* The ProMax 40 will require AA61046 double eliminator ME2, ME+, MEXP and the knockout wheel AA37348** Ask us for the right part
P R O M A X 4 0
Unique seed disk cells allow planting of a variety of seed sizes without adjustment, and provide accurate spacing and population for single seeds.
69
Seeding
N284045
AA86055
AA82684
G AU G E W H E E L A R M
A worn arm causes the wheel to move away from the blade, deteriorating seed furrow definition and can cause the gauge wheel to plug up. The gauge wheel arm is mounted to and pivots on a spindle on the shank. When this spindle or arm becomes worn, the arm loosens and the gauge wheel cannot be properly positioned next to the opener blades. A replacement corrects this problem without the need to replace the entire shank. Be sure to properly position the gauge wheel against opener blade assemblies.
S E E D B O O T S A N D S W E E P S Replace boots when they can no longer be adjusted to form the side of the furrow wall – that happens when approximately 1.27 cm of metal has worn away. Consider replacing with carbide-tip boots for abrasive soil. For hoe drills, choose short or medium/long seed boots.
DESCRIPTION SERIES PART NUMBER
Seed boot, LH750A, 1590
N284045
Seed boot, RH N284044
Tru-width sweep 740A N182042
Seed boot, LH – Extended wear N284025
Seed boot, RH – extended wear N284024
DESCRIPTION SERIES PART NUMBER
Spoked gauge wheel 740A, 750A, 1560, 1590 AA84996
Wheel, Steel gauge 750A, 1560 AA66599
Disk colter* 750A, 1590 N283804
* Do not mix high carbon and boron blades on same drill.
P R E S S W H E E L S , C L O S I N G W H E E L S A N D A S S E M B L I E S The smooth sided gauge wheel ensures precise seed placement, with a semi pneumatic press wheel for optimum seed to soil contact. The following angled closing wheel neatly closes the seed slot.
DESCRIPTION SERIES PART NUMBER
Gauge wheel arm
All units AA82684
XP row-unit A92817*
ME+ (arm only) A97866**
* Must be used with bushing A92818 ** Must be used with bushing A92818 OR A97867
70Sprayer PartsAttachments
SPRAY NOZZLES
Increase plant health with John Deere Nozzles – engineered for pinpoint accuracy in all applications: fertiliser, herbicide, fungicide and insecticide.
These SpotOn Sprayer Calibrators quickly identify worn spray nozzle tips and accurately measure true tip flow rate. All in a simple and fast process with readings in 10 seconds or less per tip. Industry guidelines recommend spray tip replacement once flow rate exceeds that of a new tip by 10%.
PM23890
B E S T F O R F L OW R AT E S B E L OW 3. 8 L / M I N
DESCRIPTION SERIES PART NUMBER
Repair kit, pump 230 L / 250 L / 280 L 600, 700, 800, M700, M700i WZ2202048
S O L U T I O N P U M P S
High flow solution pump, fitting and hoses.
DESCRIPTION SERIES PART NUMBER
Sprayer winter protection, 10 L (for France only)
All sprayers
MCB022 NA NA
Sprayer winter protection, 10 L (all other countries)
MCB012
S P R AY E R W I N T E R P R O T E C T I O N
Formulated to protect the entire liquid system of sprayers from damage caused by freezing and corrosion during cold weather or long-term storage.
73
Gator Parts
GATOR PARTS AND ATTACHMENTSYour Gator utility vehicle will work hard for you, and it can also be a lot of fun. Make your work easier and your gator even more useful by increasing its versatility and performance with our wide range of attachments.
S T E E R I N G W H E E L S P O R TAll XUV560, All XUV590/S4, XUV550
BM23933
M O U N T K I T C E L L P H O N E XUV835M, XUV865M
BRE10015
G L O V E B O X L O C KAll XUV560, All XUV590/S4, XUV550
BM24200
CAB
74
Gator Parts
BM26462
BM21646
BM26583
DESCRIPTION SERIES PART NUMBER
COLD START PACKAGES
Adaptor Parts for Engine Coolant Heater XUV865M, AllXUV855M/D (incl S4),
All HPX
AM882530
Engine Coolant Heater (110 V) AR87167
WINDSHIELDS
Panel Dust Rear All XUV590, XUV560, XUV550 (besides S4)
BM25967
Panel Rear Canvas All XUV590 (incl S4) BM26000
Window Abrasion Resistant Poly Rear
All XUV855D/M (no S4), All XUV825i, All HPX (no MY 15)
BM25147
Window Kit Rear – Deluxe Cab
All XUV855D/M (no S4), All XUV825i, All HPX
BM23505
Windshield Half – Abrasion Resistant
All XUV560, All XUV590/S4, XUV550 BM25259
Windshield Washer Fluid Kit – Deluxe Cab
All XUV855D/M (no S4), All XUV825i, All HPX
BM23534
Windshield Washer Kit (OPS) All UV (besides XUV835M, XUV865M) BM25103
DESCRIPTION SERIES PART NUMBER
Visor (1) Kit – Deluxe Cab All XUV855D/M (no S4), All XUV825i, All HPX
BM21646
Visors (2) XUV835M, XUV865M BM26478
Seat-Belt Comfort Strap (2)
All UVs (besides MY16-15) BM26583
XUV825, XUV855D/S4, HPX, XUV590/S4, XUV560, XUV550/S4 – MY 16 only
BM25923
All XUV855D/M (incl S4), All XUV825i, All HPX, All XUV560, XUV550 (no S4)
BM22703
FloormatAll XUV590 (besides S4) BM25743
All XUV560, XUV550 (no S4) BM23368
Floormat – S4 All XUV590, XUV550 S4 only BM25744
Floormat All XUV855D/M (incl S4), All XUV825i, All HPX
BM24282
Floormat (2) XUV835M, XUV865M BM26462
Floormat (S4 rear) All XUV855M/D S4 only BM24283
Air Cleaner Relocation Kit All XUV855D/M (no S4), All HPX BM25651
All XUV825i BM25652
Noise Reduction Kit All HPX BM24830
C O M F O R T
YO U R G AT O R : T O U G H A N D
R E L I A B L E
75
Gator Parts
R A D I O S
DESCRIPTION SERIES PART NUMBER
Radio John Deere with Bluetooth, USB, SD and Aux
All Uvs, XUV590M S4 (besides S4 models, XUV550)
MCXFA1893
Radio John Deere with CD USB, SD and Aux
MCXFA1894
Radio John Deere with CD, Bluetooth USB, SD, and Aux
MCXFA1895
Radio John Deere with USB, SD and Aux
MCXFA1892
Radio Kit Base XUV835M, XUV865M
BUC10615
Radio Kit Premium BUC10619
Stereo and Speaker Kit All XUV560, All XUV590/S4, XUV550 BM23379
Stereo Mounting Kit – Deluxe Cab
All XUV855D/M (no S4), All XUV825i, All HPX
BM24909
T H E I M P O R TA N T S T U F F. D O M O R E O F I T.
DESCRIPTION SERIES PART NUMBER
Sensor Kit Engine Oil Temperature All XUV560 BM26067
XUV550 no S4 BM24171
Spark Arrester Screen for Muffler XUV825, XUV855D/S4 – MY15 only AM108146
High-Capacity Alternator All XUV560, XUV550 (no S4) BM23438
Speed Limiter XUV835M BM26262
Speed Limiter Kit All XUV590 (incl XUV550S4) BM25800
Speed Limiting Clutch Kit All XUV855D/M (incl S4), All XUV825i BM24788
Speedometer Kit All XUV560, XUV550 (no S4) BM26748
E N G I N E AC C E S S O R I E S
BM26130
BM23379
BM26067
BM26262
MCXFA1893
76
Gator Parts
BM25700 BM22769 BM23526 BM22769
BM22772
BM24812
CARGO BOX
F E AT U R E S
DESCRIPTION SERIES PART NUMBER
Cargo Box Bed Mat
All XUV and HPX815E (besides all XUV590, 560, 550 and HPX)
BM22772
All HPX (besides HPX815E) VGB10133
All XUV560, All XUV590/S4, XUV550 BM23371
Cargo Box Power Lift
HPX815E BUC10351
All XUV590, XUV590 S4, XUV550 S4 BM24812
All XUV6560 and XUV550 (notS4) BM25960
All XUV855M/D, XUV825 and HPX (besides HPX815E)
BM25143
XUV835M, XUV865M BM26414
Remote Cargo Box Release Kit
All HPX VGB10507
Cargo Box Bedliner All HPX (besides HPX815E) BM25049
E X T E N S I O N
DESCRIPTION SERIES PART NUMBER
Cargo Bed Extender XUV835M, XUV865M, HPX815E BM25700
Cargo Box Divider All XUV (besides all XUV590, 560, 550 and HPX)
BM22769
Cargo Box Rails All XUV560, All XUV590/S4, XUV550 BM23526
Warn Winch 1,360.78 kg (3,000 lb) All HPX (besides HPX815E) BM24442
80
HOME & WORKSHOPHere’s everything you need to clean and maintain your equipment at home or in the workshop. Genuine John Deere Home and Workshop Products pack all the performance you need to keep your machinery looking like new.
G E T YO U R C L E A N I N GD O N E FA S T E R , F O R L E S S
EVERYTHING YOU NEEDTo make sure that you always get the maximum benefit from your John Deere high-pressure cleaner, we are offering a range of practical accessories and specialist chemicals that have all been developed specifically to enhance the operating performance of the machines.
A C T I V E WA S H
2.5 L – MCAK62958600
10 L MCAK62958610
20 L MCAK62958620
O I L A N D G R E A S E C L E A N E R
10 L – MCAK62958630
20 L – MCAK62958640
H I G H P R E S S U R E H O S E L O N G L I F E 4 0 0 , 2 0 M
MCAK63910370
C U P F O A M L A N C E 1 L
MCAK63948790
C O L D WAT E R H I G H - P R E S S U R E WA S H E R S
– AC-180EC: 3 phase 400V, 9.2 kW, 30-180 bar
– Cleaning of stables, machinery – Size: 560 x 500 x 1,090 mm
MCAK12925060*
HIGH-PRESSURE – WASHERS
– AC-200EC: 3 phase 400V, 7.0 kW, 40-200 bar
– Cleaning of stables, machinery – Size: 467 x 407 x 1,010 mm
MCAK15244080*
H I G H C L E A N I N G E F F I C E N C Y W I T H H O T WAT E R
– AC-180EH: 3 phase 400V, 8.4 kW, 30-180 bar
– Cleaning of stables, oil and grease from machinery
– Size: 1,330 x 750 x 1,060 mm
MCAK10716310*
* Please ask your John Deere dealer about the latest offers.
82
S T R O N G B OX B AT T E R I E S (S E L E C T I O N)
When reliable performance is crucial, StrongBox batteries are your only choice. Get superior performance for all makes of heavy and light duty equipment, and in environments ranging from golf courses to heavy-duty off-road work situations.*
APPLICATION DIMENSIONS VOLTS CA CCA PART NUMBER
Large tractors 330/173/240
12
105 900 MCEXTY6128W
Utility and Mid tractor 413/175/220 110 850 AL205731
Mid tractor513/189/223 154 1150
AL210285
Utility and Mid tractor (IT4) AL203839
P E R F O R M A N C E B AT T E R I E S (S E L E C T I O N)
The John Deere Performance Line of batteries is a great lower-cost alternative when you don't need the premium features of StrongBox Batteries. They are perfect for on-road and off-road vehicles. All Performance Batteries are wet.*
* Ask your John Deere dealer about the latest offers.
Did you know that genuine John Deere StrongBox batteries reliably deliver above EN and SAE standards in all conditions? They’ll give you a perfect start every time, with superior vibration resistance. Always go genuine.
YO U W I L L F E E L T H E D I F F E R E N C E
Thinking about risking it anyway? These guys might change your mind – watch this.
DON’T RISK IT
83
MCXFA1702
MCXFA1708 MCXFA1724
MCXFA1729
MCXFA1723
MCXFA1024
B AT T E R Y C H A R G E R S
Charge, maintain, recover and extend the life of your vehicle’s battery. No matter how low the temperature drops or how much charge your battery needs, you’ll know you can be up and running quickly. These maintenance chargers are especially useful for seasonal machines that are put into long term storage to avoid the hassle of a flat battery when you need to move the machine.
DESCRIPTION PART NUMBER
Smart trickle battery charger-1A MCXFA1658
Battery condition indicator (for use with MCXFA1650 & MCXFA1653 chargers) MCXFA1656
All you need to safely and cleanly handle fuels and other liquids – from rugged self-priming pumps to durable plastic fuel containers and robust drain taps.
DESCRIPTION PART NUMBER
Nylon 6.6 non-releasable cable ties 140 x 3.6 mm MCXFA1021
Nylon 6.6 non-releasable cable ties 295 x 4.8 mm MCXFA1022
Nylon 6.6 non-releasable cable ties 200 x 4.8 mm MCXFA1023
Nylon 6.6 non-releasable cable ties 370 x 4.8 mm MCXFA1024
Nylon 6.6 non-releasable cable ties 370 x 7.6 mm MCXFA1025
C A B L E T I E S
High quality, virgin Nylon 6.6, non-releasable black cable ties. High tensile strength MIL23190 E. Continuous use continuous use -40°C to +85°C.
* Available in certain countries only. Oils, coolants and greases are subject to price fluctuations. Please ask your John Deere Dealer about the latest offers.
LUBRICANTS
Formulated for off-road machinery, our lubricants bring out the best in your machines – better performance, lower costs and longer life.
E N G I N E O I L – P L U S - 5 0 I I
Premium engine oil, full fleet solution, also for low emission engines. Perfect for most severe demands and extreme operating temperatures.
DESCRIPTION SIZE PART NUMBER
Plus-50 II 15w40, ACEA E9/E7, API CK-4/CJ-4/SN
1,000 L* VC50002x1000
200/209 L VC50002x200
50/55 L* VC50002x050
20 L VC50002x020
5 L VC50002x005
E N G I N E O I L – T O R Q - G A R D
Standard-interval engine oil designed to control sludge and reduce corrosion in diesel engines up to stage IIIA.
DESCRIPTION SIZE PART NUMBER
Torq-Gard 15w40, ACEA E7/E5, API CH-4/SJ
1,000 L* VC83070-1000
200/209 L VC83070-200
50/55 L* VC83070-050
20 L VC83070-020
5 L* VC83070-005
E N G I N E O I L – T U R F - G A R D
Recommended for all 4-cycle petrol engines used in lawn and garden tractors, walk-behinds, commercial mowers, and other outdoor powered equipment.
DESCRIPTION SIZE PART NUMBER
Turf-Gard 5w30, API SN, SM, SL, ILSAC GF-5 1 L MCTY25121
85
T R A N S M I S S I O N H Y D R AU L I C O I L – H Y- G A R D
Peace of mind protection: exclusive John Deere high pressure formulation with proper viscosity over a wide range of temperatures. Hy-Gard exceeds JDM J20C specification and John Deere RES10060 factory tests.
* Available in certain countries only. Oils, coolants and greases are subject to price fluctuations. Please ask your John Deere Dealer about the latest offers.
DESCRIPTION SIZE PART NUMBER
Hy-Gard, JDM J20C
1,000 L* VC81824-1000
200/209 L VC81824-200
50/55 L* VC81824-050
20 L VC81824-020
5 L VC81824-005
Hy-Gard Low Viscosity, JDM J20D 20 L* VC81817-020
G E A R O I L – E X T R E M E- G A R D
High pressure tractor transmission oil for the effective lubrication of mechanical transmissions and gear boxes.
DESCRIPTION SIZE PART NUMBER
Extreme-Gard 80w90, API GL-520 L VC82610x020
1 L VC82610x001
Extreme-Gard 85w140, API GL-5 20 L VC82609-020
T R A N S M I S S I O N H Y D R AU L I C – B I O H Y- G A R D I I
The biodegradable alternative. Good for your land and good for your equipment. Formulated for multi-functional systems. Exceeds JDM J20C specification and John Deere RES10060 tests.
DESCRIPTION SIZE PART NUMBER
Bio Hy-Gard II, JDM J20C200 L MCYU70643200
20 L YU70643-020
C O O L A N T – C O O L- G A R D I I
Premium John Deere Coolant perfect for all your equipment and also for pumps, generators, compressors and on-road vehicles. Extended drain intervals up to 6 years/6,000 hours.
DESCRIPTION SIZE PART NUMBER
Cool-Gard II
1,000 L* YU76215-1000
200 L VC76215-200
20 L VC76215-020
5 L VC76215-005
86
MC3042134
MC3026110
MC3245504 MC3245603
G R E A S E AC C E S S O R I E S
Top of the line grease guns designed to handle work in the workshop, agricultural, or industrial applications. John Deere offers grease guns for standard pull-off cartridges (DIN1284) and Lube-Shuttle® Screw Cartridges.
GREASES
John Deere Grease is specially formulated for tough off-road and on-road conditions. It’s ideal for use in tractors, harvesters and turf machinery too. Use it to protect bearings, drive shafts and all other moving parts that require grease.
Oils, coolants and greases are subject to price fluctuations. Please ask your John Deere Dealer about the latest offers. * Lube-Shuttle® is a registered trademark of MATO.
DESCRIPTION PART NUMBER
One hand ergonomic Grease Gun, with zinc plated barrel for standard 400 g cartridges
MC3212131
One hand ergonomic Grease Gun, with zinc plated barrel for LubeShuttle cartridges
MC3026110
Manual grease gun with rigid tube for 400 g standard cartridges MC3042134
Grease-Gard Premium Plus is John Deere’s top of the line lithium complex multi-purpose grease to cover most of the greasing requirements of your equipment. Grease-Gard Premium is ideal as all-season general-purpose application.
DESCRIPTION SIZE PART NUMBER
Grease-Gard Premium
400 g VC65723-004
400 g Lube-Shuttle® YU82712-004
18 kg VC65723-020
Grease-Gard Premium Plus
400 g VC67009-004
400 g Lube-Shuttle® YU82713-004
18 kg VC67009-020
S P E C I A L P U R P O S E G R E A S E S
Special purpose high-quality greases formulated for high temperature and extreme pressure applications.
DESCRIPTION SIZE PART NUMBER
Multi-purpose Polyurea Grease, NLGI2
400 g
MCTY6341
Corn-head Grease, NLGI 0 MCAN102562
Lithium Complex Moly Grease, NLGI 2 MCTY6333
87
MCTY26788 MCTY27535
FUEL ADDITIVES AND OTHER FLUIDS
D I E S E L E X H AU S T F L U I D
A natural complement for low emission engines. Simplify your operation by making John Deere your one source for quality fluid. Additional package sizes are available from your dealer so please ask about the latest offers.
– Standard ISO 22241, AdBlue® is a registered trademark of VDA, the German Association of the Automotive Industry.
DESCRIPTION SIZE PART NUMBER
AdBlue® Diesel Exhaust Fluid 10 L MC600100001
F U E L C O N D I T I O N E R S
Don't let problematic fuel cause damage or downtime. Fuel protect conditioners help you keep going through all seasons by preventing fuel system damage caused by contaminated fuel. With Fuel Protect, you'll notice smoother starting, improved water tolerance and less exhaust smoke. Available for both diesel and petrol engines for your turf equipment.
DESCRIPTION SIZE PART NUMBER
Fuel Protect, petrol engines 250 ml MCTY27535
Fuel Conditioner for diesel engines, All-season Formula
1 L MCTY26788
20 L MCTY26789
C O R R O S I O N P R O T E C T
Protection wax, it produces a thick, touch resistant film. Ideal for the long term preservation and corrosion protection of farm and lawn equipment.
400 mlMCYU1020-004
E F F E C T I V E L O N G -T E R M P R O T E C T I O N
88
9
2
12
10
13
CHEMICALS
Take good care of your equipment, and it will treat you well and keep its value. Use these top-quality products to keep your John Deere looking and working like new.
8 | H A N D C L E A N E R Hand Cleaner with natural scrubs. Solvent-free hand cleaner. MCB025 | 3.8 L
7 | S P R AY E R W I N T E R P R O T E C T I O N Formulated specially to protect the entire liquid system of sprayers from damage caused by freezing and corrosion during cold weather or long-term storage. MCB012 | 10 L
6 | H I T E C H L U B E Lubricates under the most severe pressure. Penetrates inaccessible parts. Contains PFTE. MCB004 | 500 ml
2 | M U LT I F U N C T I O N A L G R E A S E Penetrates and lubricates all mechanisms. Repels water, prevents corrosion and rust. Can be used from -20°C to +120°C. Resists to high pressure. MCB018 | 600 ml
1 | S I L I C O N E L U B R I C A N T Protects and keeps rubber, dashboards, upholstery doors and draught excluders in good and soft condition. MCB011 | 500 ml
5 | C H A I N & C A B L E L U B R I C A N T Penetrates into the chains and all mechanisms. Reduces friction and wear. Repels water, prevents corrosion and rust. Long lasting and non sticky lubricant. MCB003 | 500 ml
4 | P E N E T R AT I N G O I L Protects against rust and corrosion. Ideal to release rusted and frozen nuts, bolts, screws, pipes, motors and machine parts. Deep penetration. MCB005 | 500 ml
3 | E L E C T R I C A L C O N TA C T C L E A N E R Quick dry cleaner that removes dirt, oil and grease from sensitive equipment and precision instruments. Leaves a protective film against oxydation. MCB009 | 500 ml
89
6
6
7
8
9 9
10
1
1
2
5
3
11
4
11 | G L A S S C L E A N E R F O A M A concentrated foamy spray that dissolves and eliminates the deepest stains including grease, fingerprints and dust. MCB015 | 600 ml
9 | B R A K E & PA R T S C L E A N E R Instantly removes brake dust, grease and dirt from brake parts. Very powerful cleaning with slow evaporation. MCB008 | 600 ml
* To be used for all penetrating lubrication
1 2 | S TA R T I N G F L U I D Ensure immediate starting for 2 and 4 stroke engines. Ensures perfect combustion and operation in all weather conditions. MCB080 | 250 ml
1 0 | C L E A N & S H I N E Cleans, renovates, polishes and protects the vehicle body. MCB010 | 500 ml
1 3 | B R A K E F L U I D Provides optimal braking response. Is suitable for all types of vehicles and is stable in varying climates. MCB002 | 500 ml
11 | E C O G L A S S C L E A N E R Removes dirt, insects, road film, smoke residues. MCB006 | 500 ml
L O O K S B E T T E R , WO R K S B E T T E R*
90
PAINTS
O R I G I N A L FAC T O R Y
F O R M U L A
A E R O S O L A N D C A N PA I N T S
John Deere aerosol and can paints are made to the original formula used in the John Deere Factories. They are ideally suited to repair your John Deere Machines and paint related mounted parts.
DESCRIPTION APPLICATION SIZE PART NUMBER
Green paint
Aerosol 400 ml
MCF100
Yellow paint MCF101
Black paint, semi-gloss MCF102
Industrial Yellow MCF103
Industrial Charcoal MCF104
Primer Beige MCF110
Green paint
Can
1 L
MCF1301
Yellow paint MCF1311
Black paint MCF1321
Primer Beige MCF1121
Green paint2.5 L
MCF13025
Yellow paint MCF13125
Thinner1 L MCF1111
5 L MCF1115
Handgrip to use with aerosol MCF120
PA I N T B R U S H E S
General purpose paint brush with synthetic bristles that are easy to clean and retain their shape. Textured plastic handle for maximum grip in use.
DESCRIPTION PART NUMBER
Paint brush 25 mm (1") MCXFA3050
Paint brush 38 mm (1.5") MCXFA3051
Paint brush 51 mm (2") MCXFA3052
Paint brush 76 mm (3") MCXFA3053
91
O B S E R VAT I O N S Y S T E M S
John Deere Heavy Duty Observation Systems let you monitor operations accurately for increased efficiency. Customised, easy to install, modular observation kits for tractor applications as well as combines and forage harvesters. Compatible with all John Deere Displays.
ACCESSORIES
Camera kits for tractor applications starting from
Camera kits for combine and forage harvester applications starting from
L I G H T B U L B S
An extensive range of popular bulbs suitable for many 12v system applications including tractors, cars, harvesters, trailers.
DESCRIPTION PART NUMBER
Light bulb – 12v 21/5w OSP BAY15d MCXFA1009
Light bulb – 12v 21w SCC BA15s MCXFA1010
Halogen headlamp – 12v 55w H1 P14.5s MCXFA1012
Halogen headlamp – 12v 55w H3 PK22s MCXFA1013
Halogen headlamp – 12v 60/55w H4 P43t MCXFA1014
Halogen headlamp – 12v 55w H7 PX26d MCXFA1015
Halogen headlamp – 12v 50w PG13J MCXFA1017
W I P E R B L A D E S
A range of quality wiper blades from 305 mm-610 mm (12"-24"). Moulded from 100% natural rubber to produce low noise and judder free wiping. The full metal structure is suitable for many applications using the included multi-fit adaptors.
DESCRIPTION PART NUMBER
Wiper blade 460 mm (18") MCXFA1754
Wiper blade 510 mm (20") MCXFA1756
Wiper blade 530 mm (21") MCXFA1757
Wiper blade 560 mm (22") MCXFA1758
Wiper blade 610 mm (24") MCXFA1759
E F F I C I E N C Y T H AT ’ S E A S Y T O I N S TA L L
MCXFA1013
MCXFA1009
MCXFA1017
MCXFA1012
92
MCXFA1566 MCXFA1567
MCXFA1562MCXFA1561
MCXFA2070
MCXFA2071
MCXFA2090
MCXFA2092
MCXFA2080
MCXFA2091
H E AV Y D U T Y C L E A N I N G W I P E S
No water needed. Anti-bacterial dual action wipe for cleaning hands and surfaces. One side has a textured cloth for removing ingrained dirt and grime, the other is smooth and absorbent for secondary cleaning.
W H E E L S P I N N E R S
Manufactured with a heavy duty, aluminium body construction and a non slip, comfort grip handle for safe and secure use. Each wheel spinner is supplied with fixing brackets and a rubber adapter for easy mounting.
DESCRIPTION PART NUMBER
Wheel spinner, black with yellow logo MCXFA1561
Wheel spinner, green with yellow logo MCXFA1562
Deluxe wheel spinner with green logo MCXFA1566
Deluxe wheel spinner with black logo MCXFA1567
DESCRIPTION PART NUMBER
Smoked lens safety glasses MCXFA2070
Blue mirror safety glasses MCXFA2071
Smoked lens safety glasses MCXFA2080
Clear lens safety glasses MCXFA2090
Smoked lens safety glasses MCXFA2091
Silver mirror safety glasses MCXFA2092
E Y E P R O T E C T I O N
Anti-scratch lenses with UV 400 protection and several lens colour options. Comes with an adjustable neck cord and a microfibre drawstring bag that can be used to clean the lenses.
H A N D P R O T E C T I O N
Box of 100 disposable industrial-grade nitrile or latex gloves. Textured finger tips for extra grip. High resistance to oil and chemicals. AQL 1.5 Grade, Nitrile gloves are 100% latex free. EN420 & EN388.
DESCRIPTION SIZE COLOUR PART NUMBER
Disposable nitrile gloves9 L
BlackMCXFA2130
10 XL MCXFA2131
Disposable latex gloves9 L
WhiteMCXFA2132
10 XL MCXFA2133
DESCRIPTION PART NUMBER
150 wipes per bucket MCXFA1557
80 wipes per bucket MCXFA1558
93
MCXFA2312
MCXFA2306
MCXFA2308
MCX2319X2321
MCX2322X2324
DESCRIPTION PART NUMBER
Tyre Pressure Gauge MCXFA1123
T Y R E P R E S S U R E G AU G E
This small jack-of-all-trades measures PSI, bar, kPa, as well as kg/cm² and features an integrated tread depth gauge. LED illuminated, it is dual powered by a solar panel and 3V CR2032 Li-Ion batteries and will auto power-off to maximise battery life.
DESCRIPTION PART NUMBER
LED Inspection Light MCXFA1807
R E C H A R G E A B L E L E D I N S P E C T I O N L I G H T
Features 26 super bright LEDs and an extra strong Li-Ion battery that lasts for up to four hours. Swivel hanging hooks and integrated magnets for convenient hands-free operation. Supplied with mains and in-car 12V charger.
LY N C H P I N S
DESCRIPTION PART NUMBER
8 mm x 38 mm Pear ring (5) MCXFA1080
8.8 mm x 42 mm Pear ring (5) MCXFA1081
10.5 mm x 51 mm Round ring (5) MCXFA1083
10.5 mm x 44 mm Round ring (5) MCXFA1084
6 mm x 42 mm Round ring (5) MCXFA1086
A B R A S I V E T O O L S
DESCRIPTION PART NUMBER
Abrasive cutting disc 115 mm (4.5") x 1 mm MCXFA2302
Abrasive flap disc 115 mm (4.5") x 10 mm 60 grit MCXFA2306
Abrasive cutting disc 230 mm (9") x 2 mm MCXFA2300
Abrasive flap disc 115 mm (4.5") x 10 mm 120 grit MCXFA2307
Abrasive cutting disc 230 mm (9") x 3.2 mm MCXFA2301
Abrasive grinding disc 230 mm (9") x 6.5 mm MCXFA2305
Universal diamond blade 115 mm (4.5") MCXFA2316
Universal diamond blade 125 mm (5") MCXFA2317
Universal diamond blade 230 mm (9") MCXFA2318
80 mm standard cup brush MCXFA2308
75 mm rigid cup brush MCXFA2309
Wire brush with plastic handle MCXFA2312
Abrasive cutting disc 125 x 1 mm MCXFA2314
Abrasive cutting disc 125 x 3 mm MCXFA2325
Abrasive flap disc, 125 mm 60 grit MCXFA2326
Abrasive flap disc, 125 mm 120 grit MCXFA2327
Abrasive grinding disc 125 x 6.5 mm MCXFA2315
Emery roll fine – 150 grit MCXFA2319
Emery roll medium – 100 grit MCXFA2320
Emery roll coarse – 60 grit MCXFA2321
Steel wool – 450 g fine MCXFA2322
Steel wool – 450 g medium MCXFA2323
Steel wool – 450 g coarse MCXFA2324
94
A
B
ED
C
A
B
ED
C
AD
A
B
ED
C
A
B
ED
C
DESCRIPTION PART NUMBER SHANK (MM)
OVERALL LENGTH (MM)
OVERALL WIDTH (MM)
INTERNAL LENGTH (MM)
INTERNAL WIDTH (MM)
WIRE ROPES A B C D E
Wire rope grip 3 mm MCXFA1290 3.5 20 20 10 3
Wire rope grip 4.5 mm MCXFA1291 5 24 22 11 4.5
Wire rope grip 6 mm MCXFA1292 6 26 22 13 6
Wire rope grip 8 mm MCXFA1293 6 41 35 20 8
Wire rope grip 9.5 mm MCXFA1294 7 42 35 20 9.5
Wire rope grip 11 mm MCXFA1295 7 45 36 25 11
D SHACKLES A B C D E
D shackles 5 mm MCXFA1302 5 32 20 21 10
D shackles 6 mm MCXFA1303 6 40 22 26 14
D shackles 8 mm MCXFA1304 8 50 33 30 17
D shackles 10 mm MCXFA1305 10 62 38 38 20
D shackles 11 mm MCXFA1306 11 70 42 45 21
D shackles 12 mm MCXFA1307 12 75 48 48 26
SNAP HOOK A B C D E
Snap hook 6x60 mm MCXFA1308 6 60 29 51 18
Snap hook 8x80 mm MCXFA1309 8 80 40 65 25
Snap hook 10x100 mm MCXFA1310 10 100 50 82 30
Snap hook 11x120 mm MCXFA1311 11 120 58 101 37
QUICK LINKS A B C D E
Quick link 6x58 mm MCXFA1313 6 58 26 50 14
Quick link 8x75 mm MCXFA1314 8 75 35 60 18
Quick link 9x82 mm MCXFA1315 9 82 37 63 20
Quick link 12x106 mm MCXFA1316 12 106 51 85 27
Quick link 16x146 mm MCXFA1317 16 146 62 117 31
TURNBUCKLES A B C D
Turnbuckle Eye/Eye 10 mm MCXFA1296 10 210 295 30 –
Turnbuckle Eye/Eye 12 mm MCXFA1297 12 230 310 35 –
Turnbuckle Hook/Eye 10 mm MCXFA1298 10 210 295 30 –
Turnbuckle Hook/Eye 12 mm MCXFA1299 12 240 310 35 –
Turnbuckle Hook/Hook 10 mm MCXFA1300 10 210 295 30 –
Turnbuckle Hook/Hook 12 mm MCXFA1301 12 240 310 35 –
W I R E R O P E G R I P S , D S H AC K L E S , S N A P H O O K S , Q U I C K L I N K S A N D T U R N B AC K L E S
All products have a galvanised finish.
D shackle Quick link Wire rope
TurnbuckleSnap hook
Min = BMax = C
95
HAND TOOLSOur professional quality hand tools significantly exceed tough DIN and ANSI standards and are a pleasure to work with.
– – ø 3 x 125, ø 4 x 150, ø 5 x 165, ø 6 x 180, ø 8 x 200, ø 10 x 215
ALL-IN PACKAGESALL YOU NEED, ONE PRICE
Are you wondering about repairing or updating your tractor but are concerned about the price? Ask us about our All-in Packages which include parts and service at an all-inclusive rate. Here is a small selection of what we offer. Please give us a call to find out how we can help.
T R AC T O R L E D PAC K AG E
T R AC T O R S E AT PAC K AG E
Benefit now from our extended engine and fuel service and let our fully trained technicians service your machine. We only use genuine John Deere lubricants and filters to ensure maximum performance and life.
LED work lights provide much better illumination and help you stay on the job while working in the dark. The replacement of older halogen lights with new LED lights will give you a completely different work experience at night.
Proper seating is critical to operate a tractor effectively and to avoid back pain during long working days. Replace your old seat with a new, air-suspended, genuine John Deere seat – for a healthy and comfortable workplace.
T R AC T O R E N G I N E & F U E L PAC K AG E
ALL-INPACKAGE
S TA R F I R E 6 0 0 0 – S F 1
G E N 4 4 2 4 0 D I S P L AY W I T H A U T O T R A C A C T I VAT I O N
A U T O T R A C U N I V E R S A L 3 0 0 S T E E R I N G K I T
YO U R B E N E F I T
– Premium guidance at a very attractive fixed price
– Significant productivity increase – Savings on fuel, fertilizer and chemicals – Precise work results in low visibility conditions – Less operator stress
O P T I O N A L U P G R A D E S
– SF1 to SF3: + annual subscription – SF3 to RTK: + annual subscription
Only at participating John Deere Dealers from 1st February 2019 until 31st July 2019. Ask your dealer for more details.
YY18
4898
8.06
ENG_
GB
R1
NEW AUTOTRAC UNIVERSAL 300 PACKAGEAUTOMATED STEERING FOR MIXED FLEETS
Approved for over 600 models from John Deere and other brands.
SPECIAL OFFER
(incl. installation & all required parts)
FARMSIGHT SERVICES
More time for your business while we optimise your machinery!
This literature has been compiled for worldwide circulation. While general information, pictures and descriptions are provided, some illustrations and text may include finance, credit, insurance, product options and accessories not available in all regions. Please contact your local dealer for details. John Deere reserves the right to change specification and design of products described in this literature without notice. The green and yellow colour scheme, the leaping deer logo and the JOHN DEERE word mark are trademarks of Deere & Company.
We are sending you this information/marketing material because we assume you are interested in receiving it. To manage our customer marketing database and to support our campaigns, we use John Deere and other carefully selected service providers who act on our behalf and strictly upon our instructions as its data processors and with whom we have in place respective data protection agreements to protect your personal data as required by law. To request a copy of the personal data we hold about you, to ask us to correct or remove information you believe is inaccurate, to opt out from receiving the mailings and ask for deletion of your data, or to exercise other rights available to you, please contact your dealer.
JohnDeere.com
Undelivered Items: Please return to the address on the left If your John Deere Catalogue address is incorrect please send your correct address to the John Deere dealer listed on this page. Please deliver to:
YY18
4898
8.06
ENG_
GB
R1 U P T I M E D E L I V E R E D – Annual Expert Check – Remote Machine Monitoring* – Back-up Tractor**
P E R F O R M A N C E I N C R E A S E D – In-field Optimisation Visit – Remote Display Access Sessions*