Retrofit kit No. 84 64 0 153 221 Installation Instructions No. 01 29 0 153 229 Issue date: 08.2002 Universal BMW Bluetooth Hands-Free Kit Retrofit BMW 3 Series Coupé and Saloon (E 46/2/4) from 09/01 Important information The retrofit kit is for use within the BMW dealership organisation only. Subject to technical modifications. Target group The target group for these installation instructions is specialist personnel trained on BMW cars with the appropriate specialist knowledge. All work must be completed using the latest BMW repair manuals, circuit diagrams, servicing manuals and work instructions in a rational order using the prescribed tools (special tools) and observing current health and safety regulations. Installation information Ensure that the cables/lines are not kinked or damaged as you install them in the car. The installed cables are to be secured with cable ties. If the specified PIN chambers are occupied, bridges, double crimps or twin-lead terminals must be used. Ordering instructions The black telephone console insert is supplied in the retrofit kit. An insert for the centre console in other colours for cars with different interior colours can be ordered if required. See the EPC for all further ordering information. The snap-in adapter is not part of the retrofit kit and must be ordered separately. List of special equipment The following special equipment must be taken into consideration when installing the retrofit kit. The various sections contain corresponding information. SA 403 Glass roof SA 602 On-board monitor SA 606 Radio navigation system SA 609 Navigation system SA 660 BMW Reverse radio SA 661 BMW Business radio SA 663 BMW Professional radio Installation time Approx. 5 hours, but this may vary depending on the condition of the car and the equipment in it. Pictograms Parts and Accessories Installation Instructions
18
Embed
Parts and Accessories Installation Instructions · Installation Instructions No . 01 29 0 153 229 Issue ... Universal BMW Bluetooth Hands-Free Kit Retrofit BMW 3 Series Coupé and
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Parts and AccessoriesInstallation Instructions
Universal BMW Bluetooth Hands-Free Kit RetrofitBMW 3 Series Coupé and Saloon (E 46/2/4) from 09/01
Important information
The retrofit kit is for use within the BMW dealership organisation only.
Subject to technical modifications.
Target group
The target group for these installation instructions is specialist personnel trained on BMW cars with the appropriate specialist knowledge.
All work must be completed using the latest BMW repair manuals, circuit diagrams, servicing manuals and work instructions in a rational order using the prescribed tools (special tools) and observing current health and safety regulations.
Installation information
Ensure that the cables/lines are not kinked or damaged as you install them in the car.
The installed cables are to be secured with cable ties.
If the specified PIN chambers are occupied, bridges, double crimps or twin-lead terminals must be used.
Ordering instructions
The black telephone console insert is supplied in the retrofit kit.
An insert for the centre console in other colours for cars with different interior colours can be ordered if required. See the EPC for all further ordering information.
The snap-in adapter is not part of the retrofit kit and must be ordered separately.
List of special equipment
The following special equipment must be taken into consideration when installing the retrofit kit. The various sections contain corresponding information.
SA 403 Glass roof
SA 602 On-board monitor
SA 606 Radio navigation system
SA 609 Navigation system
SA 660 BMW Reverse radio
SA 661 BMW Business radio
SA 663 BMW Professional radio
Installation time
Approx. 5 hours, but this may vary depending on the condition of the car and the equipment in it.
5. To install and connect the retrofit wiring harness
0
0
0
0
0
Screw branch A10 to earth post X13016.
0
Cars with SA 660/661/663 only
Insulate branches A11 and A12 and tie them back.
Cars with SA 602/606/609 only
Disconnect plug X18126 from the radio receiver (1).
0
Connect branch A12 as follows to plug X18126:
- WS/BR cable in PIN 10
- WS/GN cable in PIN 11
0
Connect branch A11 to plug X18126.
If the plug X13321 is already in the car, the two cables from branch A11 must be disconnected and connected to the same pins in the plug in the car X13321.
5. To install and connect the retrofit wiring harness
0
0
Connect branch A5 to plug X18126.
If the plug X13321 is already in the car, the two cables from branch A5 must be disconnected and connected to the same pins in the plug in the car X13321.
If required, the circuit diagram for the multi wiring harness II can be referred to in the “Multi Wiring Harness II Circuit Diagrams” installation instructions, PN: 01 29 0 146 544, in TeTis or the EBA CD.