Partek Atlantic PFA / PTFE Valves 4182 A00.pdf · Partek Operation Tucson, AZ 3 Overview Partek produces products that are made from only the finest Fuoropolymers available. These
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
3-D DrawingsMaster Table of Contents Web SiteSearch
Parker Hannifin CorporationPartek OperationTucson, AZ
Table of Contents
Technical Information ........................................................................................................................................ 3
Offer of Sale ........................................................................................................................................................ 58
Copyright 2003, Parker Hannifin Corporation, All Rights Reserved
FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL
INJURY AND PROPERTY DAMAGE.
This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for further investigation by
users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current product
catalog. Due to the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the
final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met.
The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Parker Hannifin Corporation
and its subsidiaries at any time without notice.
WARNING
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
3
OverviewPartek produces products that are made from only the finest Fuoropolymers available. These Fluoropolymers are
resistant to numerous chemicals and solvents. This information provides only a brief technical overview . For more
comprehensive technical and chemical compatibility information, please ask for Technical Bulletin 0002-T1/USA.
Fluorinated PolymersChemical Properties Electrical Properties Mechanical Properties• Resistivity to corrosive agents • Low dielectric constant • Flexibility at low temperatures
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
8
FeaturesOne piece precisionmachined diaphragmmanufactured from thelatest technologymodified PTFE, providesover five times the flex-ural life as compared toconventional PTFE.
Full flow through port.
Purge port option.
BenefitsHigher cycle life result-ing in less downtimeand lower replacementcosts.
Reduced pressure drop.
Allows system mainte-nance downstream ofvalve without disruptingmain flow.
SpecificationsMaterials of ConstructionWetted: PTFE, Modified PTFE
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
10
FeaturesOne piece precisionmachined diaphragmsmanufactured from thelatest technologymodified PTFE.Provides over five timesthe flexural life ascompared toconventional PTFE.Tongue and groove seatand diaphragm forpositive through flowshut off and diaphragmto body seal.
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
12
FeaturesOne piece precisionmachined diaphragmsmanufactured from thelatest technologymodified PTFE.Provides over five timesthe flexural life ascompared toconventional PTFE.Tongue and groove seatand diaphragm forpositive through flowshut off and diaphragmto body seal.
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
14
FeaturesOne piece precisionmachined diaphragmmanufactured from thelatest technologymodified PTFE.Provides over five timesthe flexural life ascompared toconventional PTFE.Tongue and groove seatand diaphragm forpositive through flowshut off and diaphragmto body seal.
PVDF coated stainlesssteel spring.
Submergible optionisolates all valvecomponents from theexternal environment.
BenefitsHigh cycle life.
Lower replacementcosts.
Less downtime.
Reduces effects ofcorrosive environments.
Valve remains functionalwhile operating in wet orgaseous corrosiveenvironments.
SpecificationsMaterials of ConstructionWetted: PFA, Modified PTFE
Non-wetted: PFA, PVDF, Viton seals, PTFE coated SS springs
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
16
FeaturesOne piece precisionmachined diaphragmmanufactured from thelatest technologymodified PTFE.Provides over five timesthe flexural life ascompared toconventional PTFE.Tongue and groove seatand diaphragm forpositive through flowshut off and diaphragmto body seal.
PVDF coated stainlesssteel spring.
Submergible optionisolates all valvecomponents from theexternal environment.
BenefitsHigh cycle life.
Lower replacementcosts.
Less downtime.
Reduces effects ofcorrosive environments.
Valve remains functionalwhile operating in wet orgaseous corrosiveenvironments.
SpecificationsMaterials of ConstructionWetted: PFA, Modified PTFE
Non-wetted: PFA, PVDF, Viton seals, PTFE coated SS springs
Pressure RangesCOM to NO: 27” HG vacuum (913 mbar) to 80 PSIG (5.5 bar)
COM to NC: 27” HG vacuum (913 mbar) to 25 PSIG (1.7 bar) minimum
NC to COM: 27” HG vacuum (913 mbar) to 80 PSIG (5.5 bar)
with 50 PSIG (3.4 bar) maximum back pressure
Pressure ranges for operation at ambient temperatures. For
use at higher temperatures consult Pressure/Temperature chart
on page 3.
Temperature Ranges
Ambient: 0° - 150° F (17° - 66° C)
Fluid: 0° - 266° F (17° - 130° C)
Product OverviewThe MV-11 PFA 3 Way Diaphragm Valve is designed for
use in high purity semiconductor applications. It is also
ideally suited for ultra-pure water and aggressive chemical
or gas applications. The design utilizes a molded high
purity PFA body with precision machined sealing areas.
One piece machined modified PTFE diaphragms are also
utilized for excellent flexibility and life. A full 1/2” orifice
provides maximum flow capability in a compact package.
MV-11 1/2” Manual 3 Way Valve
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
17
1/2" FNPT
NO
3/4" PARFLARE
2.01 [50.93]
2.06 [52.25]
NO
1/2" PARBOND
2.06 [52.25]
NO
3/4" PARBOND
NO
.375 [9.52] MAX.PANEL WIDTH
NC
"1/2
AP
DVP
F
COM
REA
LF
R
1.82 [46.20]
5.87 MAX. [149.07]
Ø1.636 [41.55]
1.58 [40.18]
2.88 [73.03]
MOUNTING DETAIL
Ø1.44 [36.58]
2X .68 [17.32]
[1.65]
2X R .065
PANEL HOLE DETAIL
.57 [14.40]
Ø2.93
2X Ø.26
3.23
[82.12]
2.60
[65.96]
1.30
[33.07]
[74.42]
[6.60]
1/2" PARFLARE
TEST PORT CONNECTIONS, 1/4-28 UNF
BRACKETED DIMENSIONSARE IN mm.
MV-11 1/2” Manual 3 Way Valve
Parflare models are supplied with PVDF nuts. For PFA nuts add -T to model number.
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
18
FeaturesOne piece precisionmachined diaphragmmanufactured from thelatest technologymodified PTFE.Provides over five timesthe flexural life ascompared toconventional PTFE.Tongue and groovediaphragm to body sealassures leak freeoperation.
PVDF coated stainlesssteel spring.
Multi-turn operation.
Removable handle.
BenefitsHigh cycle life.
Lower replacementcosts.
Less downtime.
Reduces effects ofcorrosive environments.
Precise flow adjustment.
Eliminates need forseparate lockout device.
SpecificationsMaterials of ConstructionWetted: PFA, Modified PTFE
Non-wetted: PFA, PVDF, Viton seals, PTFE coated SS springs
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
20
FeaturesOne piece precisionmachined diaphragmmanufactured from thelatest technologymodified PTFE.Provides over five timesthe flexural life ascompared toconventional PTFE.Tongue and groove seatand diaphragm forpositive through flowshut off and diaphragmto body seal.
PVDF coated stainlesssteel spring.
Submergible optionisolates all valvecomponents from theexternal environment.
BenefitsHigh cycle life.
Lower replacementcosts.
Less downtime.
Reduces effects ofcorrosive environments.
Valve remains functionalwhile operating in wet orgaseous corrosiveenvironments.
SpecificationsMaterials of ConstructionWetted: PFA, Modified PTFE
Non-wetted: PFA, PVDF, Viton seals, PTFE coated SS springs
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
26
Product OverviewThe MV-16 PFA diaphragm valve is designed for use in
high purity semiconductor applications, and is also ide-
ally suited for ultra-pure water and aggressive chemical
or gas applications. The design utilizes a molded high
purity PFA body with precision machined seat and dia-
phragm sealing areas. A one piece machined modified
PTFE diaphragm is also utilized for excellent flexibility
and life. The MV-16’s multi-turn capability allows precise
flow adjustment. A full 3/4” orifice provides maximum flow
capability in a compact package.
MV-16 3/4” Manual PFA 2 Way Valve
FeaturesOne piece precisionmachined diaphragmmanufactured from thelatest technologymodified PTFE. Providesover five times theflexural life as comparedto conventional PTFE.Tongue and groove seatand diaphragm forpositive through flowshut off and diaphragmto body seal.
Halar coated stainlesssteel spring.
BenefitsHigh cycle life.
Lower replacementcosts.
Less downtime.
Reduces effects ofcorrosive environments.
SpecificationsMaterials of ConstructionWetted: PFA, Modified PTFE
Non-wetted: PVDF, Viton, PTFE coated SS spring
Pressure Ranges0 - 120 PSIG (8.3 bar) See Cracking Pressure Chart on next page.
Pressure ranges for operation at ambient temperatures. For
use at higher temperatures consult Pressure/Temperature chart
on page 3.
Temperature RangesAmbient: 0° - 150° F (-17° - 66° C)
Fluid: 0° - 266° F (-17° - 130° C)
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
27
2.73
[69.3 mm]
3.43
[87.1 mm]
6.21
[157.8 mm]
A
1.70
[43.2 mm]
Ø4.38
[Ø111.3 mm]
4X .28
[7.1 mm]
Ø3.75
[Ø95.3 mm]
4X 75˚
EQUALLY
SPACED
AIR PORT CONNECTION, 1/8” FNPTTEST PORT CONNECTION, 1/4-28 UNF
BRACKETED DIMENSIONSARE IN mm.
Parflare models are supplied with PVDF nuts. For PFA nuts add -T to model number.
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
28
Product OverviewThe MV-16 PFA diaphragm valve is designed for use in
high purity semiconductor applications, and is also ide-
ally suited for ultra-pure water and aggressive chemical
or gas applications. The design utilizes a molded high
purity PFA body with precision machined seat and dia-
phragm sealing areas. A one piece machined modified
PTFE diaphragm is also utilized for excellent flexibility
and life. The MV-16’s multi-turn capability allows precise
flow adjustment. A full 3/4” orifice provides maximum flow
capability in a compact package.
MV-16 3/4” Manual PFA 3 Way Valve
FeaturesOne piece precisionmachined diaphragmmanufactured from thelatest technologymodified PTFE. Providesover five times theflexural life as comparedto conventional PTFE.Tongue and groove seatand diaphragm forpositive through flowshut off and diaphragmto body seal.
Halar coated stainlesssteel spring.
BenefitsHigh cycle life.
Lower replacementcosts.
Less downtime.
Reduces effects ofcorrosive environments.
SpecificationsMaterials of ConstructionWetted: PFA, Modified PTFE
Non-wetted: PVDF, Viton, PTFE coated SS spring
Pressure Ranges0 - 120 PSIG (8.3 bar) See Cracking Pressure Chart on next page.
Pressure ranges for operation at ambient temperatures. For
use at higher temperatures consult Pressure/Temperature chart
on page 3.
Temperature RangesAmbient: 0° - 150° F (-17° - 66° C)
Fluid: 0° - 266° F (-17° - 130° C)
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
29
2.69
[68.4 mm]
3.39
[86.2 mm]
1.66
[42.2 mm]
6.44
[163.4 mm]
Ø4.38
[Ø111.3 mm]
4X .28
[7.1 mm]
Ø3.75
[Ø95.3 mm]
4X 75˚
EQUALLY
SPACED
AB
Parflare models are supplied with PVDF nuts. For PFA nuts add -T to model number.
*Ends are fused on.
MV-16 3/4” Manual PFA 3 Way Valve
BRACKETED DIMENSIONSARE IN mm.
AIR PORT CONNECTION, 1/8” FNPTTEST PORT CONNECTION, 1/4-28 UNF
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
30
Product OverviewThe MV-16 PFA sampling valve is designed for use in
high purity semiconductor applications, and is also ide-
ally suited for ultra-pure water and aggressive chemical
or gas applications. The design utilizes a molded high
purity PFA body with precision machined seat and dia-
phragm sealing areas. A one piece machined modified
PTFE diaphragm is also utilized for excellent flexibility
and life. The MV-16’s multi-turn capability allows precise
flow adjustment. The valve incorporates a full flow through
port with a low dead volume down leg.
MV-16 3/4” Manual PFA Sampling Valve
FeaturesOne piece precisionmachined diaphragmmanufactured from thelatest technologymodified PTFE. Providesover five times theflexural life as comparedto conventional PTFE.
Halar coated stainlesssteel spring.
Full flow through port.
BenefitsHigh cycle life.
Lower replacementcosts.
Less downtime.
Reduces effects ofcorrosive environments.
Reduced pressure drop.
SpecificationsMaterials of ConstructionWetted: PFA, Modified PTFE
Non-wetted: PVDF, Viton, PTFE coated SS spring
Pressure Ranges0 - 120 PSIG (8.3 bar) See Cracking Pressure Chart on next page.
Pressure ranges for operation at ambient temperatures. For
use at higher temperatures consult Pressure/Temperature chart
on page 3.
Temperature RangesAmbient: 0° - 150° F (-17° - 66° C)
Fluid: 0° - 266° F (-17° - 130° C)
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
31
6.49
[164.7 mm]
2.69
[68.4 mm]
3.39
[86.2 mm]
Ø4.38
[Ø111.3 mm]
4X .28
[7.1 mm]
Ø3.75
[Ø95.3 mm]
4X 75˚
EQUALLY
SPACED
1.66
[42.2 mm]
AB
Parflare models are supplied with PVDF nuts. For PFA nuts add -T to model number.
MV-16 3/4” Manual PFA Sampling Valve
AIR PORT CONNECTION, 1/8” FNPTTEST PORT CONNECTION, 1/4-28 UNF
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
32
FeaturesPrecision machineddiaphragm manufacturedfrom the latest technologymodified PTFE. Providesover five times the flexurallife as compared toconventional PTFE.Tongue and groove sealfor positive diaphragm tobody seal.
Compact designactuator works on aslittle as 20 psi.
BenefitsHigh cycle life.
Lower replacementcosts.
Less downtime.
Isolates media fromactuator.
Ease of installation andmaintenance.
SpecificationsMaterials of ConstructionWetted: PTFE, Modified PTFE
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
34
FeaturesOne piece precisionmachined diaphragmsmanufactured from thelatest technologymodified PTFE.Provides over five timesthe flexural life ascompared toconventional PTFE.Tongue and groove seatand diaphragm forpositive through flowshut off and diaphragmto body seal.
PVDF coated stainlesssteel spring.
BenefitsHigh cycle life.
Lower replacementcosts.
Less downtime.
Reduces effects ofcorrosive environments.
SpecificationsMaterials of ConstructionWetted: PFA, Modified PTFE
3-D DrawingsWeb Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
36
FeaturesOne piece precisionmachined diaphragmsmanufactured from thelatest technologymodified PTFE.Provides over five timesthe flexural life ascompared toconventional PTFE.Tongue and groove seatand diaphragm forpositive through flowshut off and diaphragmto body seal.
PVDF coated stainlesssteel springs.
BenefitsHigh cycle life.
Lower replacementcosts.
Less downtime.
Reduces effects ofcorrosive environments.
SpecificationsMaterials of ConstructionWetted: PFA, Modified PTFE
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
38
FeaturesOne piece precisionmachined diaphragmmanufactured from thelatest technologymodified PTFE.Provides over five timesthe flexural life ascompared toconventional PTFE.Tongue and groove seatand diaphragm forpositive through flowshut off and diaphragmto body seal.
PVDF coated stainlesssteel spring.
Submergible optionisolates all valvecomponents from theexternal environment.
BenefitsHigh cycle life.
Lower replacementcosts.
Less downtime.
Reduces effects ofcorrosive environments.
Valve remains functionalwhile operating in wet orgaseous corrosiveenvironments.
SpecificationsMaterials of ConstructionWetted: PFA, Modified PTFE
Non-wetted: PFA, PVDF, Viton seals, PTFE coated SS springs
Parflare models are supplied with PVDF nuts. For PFA nuts add -T to model number.
PRESSURE DROP VS. FLOW RATEFLOW RATE (lpm)
FLOW RATE (gpm)
DE
LTA
-P (
ps
i)
DE
LTA
-P (
ba
r)
0 5
4
10
8
15
12
20
16
25
20
30
24
.28
.56
.84
1.12
1.40
1.65
19 38 57 76 95 113
1/2" ParfareAll Other Configurations
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
40
FeaturesOne piece precisionmachined diaphragmsmanufactured from thelatest technologymodified PTFE.Provides over five timesthe flexural life ascompared toconventional PTFE.Tongue and groove seatand diaphragm forpositive through flowshut off and diaphragmto body seal.
PVDF coated stainlesssteel springs.
Submergible optionisolates all valvecomponents from theexternal environment.
Multi-position mountingbase.
BenefitsHigh cycle life.
Lower replacementcosts.
Less downtime.
Reduces effects ofcorrosive environments.
Valve remains functionalwhile operating in wet orgaseous corrosiveenvironments.
Allows for moremounting flexibility andconnector fittingreduction.
SpecificationsMaterials of ConstructionWetted: PFA, Modified PTFE
Non-wetted: PFA, PVDF, Viton seals, PTFE coated SS springs
Pressure RangesCOM to NO: 27” HG vacuum (913 mbar) to 80 PSIG (5.5 bar)
NO to COM: 27” HG vacuum (913 mbar) to 80 PSIG (5.5 bar)
COM to NC: 27” HG vaccum (913 mbar) to 80 PSIG (5.5 bar) with
20 PSIG (1.4 bar) maximum back pressure
NC to COM: 27” HG vacuum (913 mbar) to 80 PSIG (5.5 bar) with
50 PSIG (3.4 bar) maximum back pressure
Actuator: 60 PSIG (4.2 bar) to 100 PSIG (7 bar)
Pressure ranges for operation at ambient temperatures. For
use at higher temperatures consult Pressure/Temperature chart
on page 3.
Temperature RangesAmbient: 0° - 150° F (-17° - 66° C)
Fluid: 0° - 266° F (-17° - 130° C)
Product OverviewThe PV-11 PFA 3 Way Diaphragm Valve is designed for
use in high purity semiconductor applications. It is also
ideally suited for ultra-pure water and aggressive chem-
ical or gas applications. The design utilizes a molded high
purity PFA body with precision machined areas. One piece
machined modified PTFE diaphragms are also utilized
for excellent flexibility and life. A full 1/2” orifice provides
maximum flow capability in a compact package.
PV-11 1/2” Pneumatic 3 Way Valve
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
41
.57 [14.40]
NO
2.01 [50.93]
3/4" PARFLARE
1/2" FNPT
NO
2.88 [73.03]
2.06 [52.25]
1/2" PARBOND
2.06 [52.25]
NO
3/4" PARBOND
NC NO
2.56 [65.10]
3.18 [80.87]
Ø1.636 [41.55]
Ø 2.93[74.42]
FL
REA
P
1
D
F
AP
2" /
VR
4.54 [115.42]
1.82 [46.20]
1.28 [32.47]
1/2" PARFLARE
MOUNTING DETAIL
2X Ø .26[6.60]
1.58 [40.18]
COM
AIR PORT CONNECTION, 1/8” FNPTTEST PORT CONNECTIONS, 1/4-28 UNF
Parflare models are supplied with PVDF nuts. For PFA nuts add -T to model number.
PRESSURE DROP VS. FLOW RATEFLOW RATE (lpm)
FLOW RATE (gpm)
DE
LTA
-P (
ps
i)
DE
LTA
-P (
ba
r)
0 5
4
10
8
15
12
20
16
25
20
30
24
.28
.56
.84
1.12
1.40
1.65
19 38 57 76 95 113
1/2" ParfareAll Other Configurations
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
42
FeaturesPrecision machineddiaphragmmanufactured from thelatest technologymodified PTFE.Provides over five timesthe flexural life ascompared toconventional PTFE.Tongue and groove seatand diaphragm forpositive through flowshut off and diaphragmto body seal.
PVDF coated stainlesssteel spring.
Bypass integral to valvebody to prevent stagna-tion of ultra-pure water.
Parflare models are supplied with PVDF nuts. For PFA nuts add -T to model number.
PRESSURE DROP VS. FLOW RATEFLOW RATE (lpm)
FLOW RATE (gpm)
DE
LTA
-P (
psi)
DE
LTA
-P (
bar)
0 5
4
10
8
15
12
20
16
25
20
30
24
.28
.56
.84
1.12
1.40
1.65
19 38 57 76 95 113
1/2" ParfareAll Other Configurations
Cv / Kv vs. TURNS FOR BYPASS PORT
TURNS
Cv
Kv
0 0.6
.02
1.2
.04
1.8
.06
2.4
.08
3.0
.10
3.6
.12
.29
.57
.86
1.14
1.43
1.71
All Configurations
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
44
FeaturesOne piece precisionmachined diaphragmmanufactured from thelatest technologymodified PTFE.Provides over five timesthe flexural life ascompared toconventional PTFE.Tongue and groove seatand diaphragm forpositive through flowshut off and diaphragmto body seal.
PVDF coated stainlesssteel spring.
Submergible optionisolates all valvecomponents from theexternal environment.
BenefitsHigh cycle life.
Lower replacementcosts.
Less downtime.
Reduces effects ofcorrosive environments.
Valve remains functionalwhile operating in wet orgaseous corrosiveenvironments.
SpecificationsMaterials of ConstructionWetted: PFA, Modified PTFE
Non-wetted: PFA, PVDF, Viton seals, PTFE coated SS springs
Pressure ranges for operation at ambient temperatures. For
use at higher temperatures consult Pressure/Temperature chart
on page 3.
Temperature RangesAmbient: 0° - 150° F (-17° - 66° C)
Fluid: 0° - 266° F (-17° - 130° C)
Normally Closed shown
Product OverviewThe PV-12 Diaphragm Valve is designed for use in high
purity semiconductor applications, and is also ideally suit-
ed for ultra-pure water and aggressive chemical or gas
applications. The design utilizes a molded high purity PFA
body with precision machined seat and diaphragm seal-
ing areas. A one piece machined modified PTFE dia-
phragm is also utilized for excellent flexibility and life. A
full 1” orifice provides maximum flow capability in a com-
pact package.
PV-12 1” Pneumatic 2 Way Valve
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
45
1.07[27.23]
4.00 [101.70]
2.59 [65.86]
PARFLARE
1"
Ø4.22 [Ø107.19]
2X Ø.28 [Ø7.11]
3.75 [95.35]
1.88 [47.68]
1" PARBOND
4.28 [108.81]
2.56 [65.00]
5.78 [146.81]
.323 [82.04]
(N.O. ONLY)
2.32 [58.85]
PARBOND
3/4"
AIR AND TEST PORTCONNECTIONS, 1/8” FNPT
BRACKETED DIMENSIONSARE IN mm.
PV-12 1” Pneumatic 2 Way Valve
rebmuNledoM CV KV .gifnoCwolF .gifnoCtroP
100-21-VP 7.51 2.422
CN
dnobraP"1
200-21-VP 3.31 9.981 eralfraP"1
300-21-VP 6.9 8.241 dnobraP"4/3
rebmuNledoM CV KV .gifnoCwolF .gifnoCtroP
500-21-VP 7.51 2.422
ON
dnobraP"1
600-21-VP 3.31 9.981 eralfraP"1
700-21-VP 6.9 8.241 dnobraP"4/3
Parflare models are supplied with PVDF nuts. For PFA nuts add -T to model number.
PRESSURE DROP VS. FLOW RATEFLOW RATE (lpm)
FLOW RATE (gpm)
DE
LTA
-P (
ps
i)
DE
LTA
-P (
ba
r)
0 10
10
20
20
30
30
40
40
50
50
60
60
.7
1.4
2.1
2.8
3.5
4.2
38 76 113 151 189 227
3/4" Parbond 1" Parflare1" Parbond
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
46
Product OverviewThe PV-16 PFA diaphragm valve is designed for use in
high purity semiconductor applications, and is also ide-
ally suited for ultra-pure water and aggressive chemical
or gas applications. The design utilizes a molded high
purity PFA body with precision machined seat and dia-
phragm sealing areas. A one piece machined modified
PTFE diaphragm is also utilized for excellent flexibility
and life. A full 3/4” orifice provides maximum flow capabil-
ity in a compact package.
PV-16 3/4” Pneumatic PFA 2 Way Valve
FeaturesOne piece precisionmachined diaphragmmanufactured from thelatest technologymodified PTFE. Providesover five times theflexural life as comparedto conventional PTFE.Tongue and groove seatand diaphragm forpositive through flowshut off and diaphragmto body seal.
Halar coated stainlesssteel spring.
BenefitsHigh cycle life.
Lower replacementcosts.
Less downtime.
Reduces effects ofcorrosive environments.
SpecificationsMaterials of ConstructionWetted: PFA, Modified PTFE
Non-wetted: PVDF, Viton, PTFE coated SS spring
Pressure Ranges0 - 120 PSIG (8.3 bar) See Cracking Pressure Chart on next page.
Actuation: 60 PSIG (4.1 bar) - 120 PSIG (8.3 bar)
Pressure ranges for operation at ambient temperatures. For
use at higher temperatures consult Pressure/Temperature chart
on page 3.
Temperature RangesAmbient: 0° - 150° F (-17° - 66° C)
Fluid: 0° - 266° F (-17° - 130° C)
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
47
Ø4.38
[Ø111.3 mm]
4X .28
[7.1 mm]
Ø3.75
[Ø95.3 mm]
4X 75˚
EQUALLY
SPACED
2.73
[69.3 mm]
3.43
[87.1 mm]
1.70
[43.2 mm]
5.28
[134.0 mm]
A
AIR PORT CONNECTION, 1/8” FNPTTEST PORT CONNECTION, 1/4-28 UNF
BRACKETED DIMENSIONSARE IN mm.
Parflare model numbers are supplied with PVDF nuts. Also available with PFA (-T) nuts.
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
48
Product OverviewThe PV-16 PFA diaphragm valve is designed for use in
high purity semiconductor applications, and is also ide-
ally suited for ultra-pure water and aggressive chemical
or gas applications. The design utilizes a molded high
purity PFA body with precision machined seat and dia-
phragm sealing areas. A one piece machined modified
PTFE diaphragm is also utilized for excellent flexibility
and life. A full 3/4” orifice provides maximum flow capabil-
ity in a compact package.
PV-16 3/4” Pneumatic PFA 3 Way Valve
FeaturesOne piece precisionmachined diaphragmmanufactured from thelatest technologymodified PTFE. Providesover five times theflexural life as comparedto conventional PTFE.Tongue and groove seatand diaphragm forpositive through flowshut off and diaphragmto body seal.
Halar coated stainlesssteel spring.
BenefitsHigh cycle life.
Lower replacementcosts.
Less downtime.
Reduces effects ofcorrosive environments.
SpecificationsMaterials of ConstructionWetted: PFA, Modified PTFE
Non-wetted: PVDF, Viton, PTFE coated SS spring
Pressure Ranges0 - 120 PSIG (8.3 bar) See Cracking Pressure Chart on next page.
Actuation: 60 PSIG (4.1 bar) - 120 PSIG (8.3 bar)
Pressure ranges for operation at ambient temperatures. For
use at higher temperatures consult Pressure/Temperature chart
on page 3.
Temperature RangesAmbient: 0° - 150° F (-17° - 66° C)
Fluid: 0° - 266° F (-17° - 130° C)
3-D DrawingsWeb Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
49
5.53
[140.6 mm]
Ø4.38
[Ø111.3 mm]
Ø3.75
[Ø95.3 mm]
4X .28
[7.1 mm]
4X 75˚
EQUALLY
SPACED
3.39
[86.2 mm]2.69
[68.4 mm]1.66
[42.2 mm]
AB
AIR PORT CONNECTION, 1/8” FNPTTEST PORT CONNECTION, 1/4-28 UNF
BRACKETED DIMENSIONSARE IN mm.
Parflare model numbers are supplied with PVDF nuts. Also available with PFA (-T) nuts.
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
50
Product OverviewThe PV-16 PFA sampling valve is designed for use in
high purity semiconductor applications, and is also ide-
ally suited for ultra-pure water and aggressive chemical
or gas applications. The design utilizes a molded high
purity PFA body with precision machined seat and dia-
phragm sealing areas. A one piece machined modified
PTFE diaphragm is also utilized for excellent flexibility
and life. The valve incorporates a full flow through port
with a low dead volume down leg.
PV-16 3/4” Pneumatic PFA Sampling Valve
FeaturesOne piece precisionmachined diaphragmmanufactured from thelatest technologymodified PTFE. Providesover five times theflexural life as comparedto conventional PTFE.
Halar coated stainlesssteel spring.
Full flow through port.
BenefitsHigh cycle life.
Lower replacementcosts.
Less downtime.
Reduces effects ofcorrosive environments.
Reduced pressure drop.
SpecificationsMaterials of ConstructionWetted: PFA, Modified PTFE
Non-wetted: PVDF, Viton, PTFE coated SS spring
Pressure Ranges0 - 120 PSIG (8.3 bar) See Cracking Pressure Chart on next page.
Actuation: 60 PSIG (4.1 bar) - 120 PSIG (8.3 bar)
Pressure ranges for operation at ambient temperatures. For
use at higher temperatures consult Pressure/Temperature chart
on page 3.
Temperature RangesAmbient: 0° - 150° F (-17° - 66° C)
Fluid: 0° - 266° F (-17° - 130° C)
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
51
2.73
[69.3 mm]
3.43
[87.1 mm]
Ø4.38
[Ø111.3 mm]
1.70
[43.2 mm]
5.28
[134.0 mm]
4X 75˚
EQUALLY
SPACED
4X .28
[7.1 mm]
Ø3.75
[Ø95.3 mm]
AB
AIR PORT CONNECTION, 1/8” FNPTTEST PORT CONNECTION, 1/4-28 UNF
BRACKETED DIMENSIONSARE IN mm.
Parflare model numbers are supplied with PVDF nuts. Also available with PFA (-T) nuts.
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek OperationTucson, AZ
58
1. Terms and Conditions of Sale: All descriptions, quotations, proposals,offers, acknowledgments, acceptances and sales of Seller’s products aresubject to and shall be governed exclusively by the terms and conditionsstated herein. Buyer’s acceptance of any offer to sell is limited to theseterms and conditions. Any terms or conditions in addition to, or inconsistentwith those stated herein, proposed by Buyer in any acceptance of an offerby Seller, are hereby objected to. No such additional, different or inconsis-tent terms and conditions shall become part of the contract between Buyerand Seller unless expressly accepted in writing by Seller. Seller’s accep-tance of any offer to purchase by Buyer is expressly conditional uponBuyer’s assent to all the terms and conditions stated herein, including anyterms in addition to, or inconsistent with those contained in Buyer’s offer,Acceptance of Seller’s products shall in all events constitute such assent.2. Payment: Payment shall be made by Buyer net 30 days from the dateof delivery of the items purchased hereunder. Amounts not timely paid shallbear interest at the maximum rate permitted by law for each month or portionthereof that the Buyer is late in making payment. Any claims by Buyer foromissions or shortages in a shipment shall be waived unless Seller receivesnotice thereof within 30 days after Buyer’s receipt of the shipment.3. Delivery: Unless otherwise provided on the face hereof, delivery shall bemade F.O.B. Seller’s plant. Regardless of the method of delivery, however,risk of loss shall pass to Buyer upon Seller’s delivery to a carrier. Anydelivery dates shown are approximate only and Seller shall have no liabilityfor any delays in delivery.4. Warranty: Seller warrants that the items sold hereunder shall be freefrom defects in material or workmanship for a period of 18 months from dateof shipment from Parker Hannifin Corporation. THIS WARRANTY COM-PRISES THE SOLE AND ENTIRE WARRANTY PERTAINING TO ITEMSPROVIDED HEREUNDER. SELLER MAKES NO OTHER WARRANTY,GUARANTEE, OR REPRESENTATION OF ANY KIND WHATSOEVER.ALL OTHER WARRANTIES, INCLUDING BUT NOT LIMITED TO, MER-CHANTABILITY AND FITNESS FOR PURPOSE, WHETHER EXPRESS,IMPLIED, OR ARISING BY OPERATION OF LAW, TRADE USAGE, ORCOURSE OF DEALING ARE HEREBY DISCLAIMED.NOTWITHSTANDING THE FOREGOING, THERE ARE NO WARRAN-TIES WHATSOEVER ON ITEMS BUILT OR ACQUIRED WHOLLY ORPARTIALLY, TO BUYER’S DESIGNS OR SPECIFICATIONS.5. Limitation Of Remedy: SELLER’S LIABILITY ARISING FROM OR INANY WAY CONNECTED WITH THE ITEMS SOLD OR THIS CONTRACTSHALL BE LIMITED EXCLUSIVELY TO REPAIR OR REPLACEMENTOF THE ITEMS SOLD OR REFUND OF THE PURCHASE PRICE PAID BYBUYER, AT SELLER’S SOLE OPTION. IN NO EVENT SHALL SELLERBE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIALDAMAGES OF ANY KIND OR NATURE WHATSOEVER, INC.LUDING BUT NOT LIMITED TO LOST PROFITS ARISING FROM OR INANY WAY CONNECTED WITH THIS AGREEMENT OR ITEMS SOLDHEREUNDER, WHETHER ALLEGED TO ARISE FROM BREACH OFCONTRACT, EXPRESS OR IMPLIED WARRANTY, OR IN TORT, IN-CLUDING WITHOUT LIMITATION, NEGLIGENCE, FAILURE TO WARNOR STRICT LIABILITY.6. Changes, Reschedules and Cancellations: Buyer may request tomodify the designs or specifications for the items sold hereunder as well asthe quantities and delivery dates thereof, or may request to cancel all or partof this order, however, no such requested modification or cancellation shallbecome part of the contract between Buyer and Seller unless accepted bySeller in a written amendment to this Agreement. Acceptance of any suchrequested modification or cancellation shall be at Seller’s discretion, andshall be upon such terms and conditions as Seller may require.7. Special Tooling: A tooling charge may be imposed for any specialtooling, including without limitation, dies, fixtures, molds and patterns,acquired to manufacture items sold pursuant to this contract. Such specialtooling shall be and remain Seller’s property notwithstanding payment ofany charges by Buyer. In no event will Buyer acquire any interest inapparatus belonging to Seller which is utilized in the notwithstanding anycharges paid by Buyer. Unless otherwise agreed, Seller shall have the rightto alter, discard or otherwise dispose of any special tooling or other propertyin its sole discretion at any time.
8. Buyer’s Property: Any designs, tools, patterns, materials, drawings,confidential information or equipment furnished by Buyer or any other itemswhich become Buyer’s property, may be considered obsolete and may bedestroyed by Seller after two (2) consecutive years have elapsed withoutBuyer placing an order for the items which are manufactured using suchproperty, Seller shall not be responsible for any loss or damage to suchproperty while it is in Seller’s possession or control.9. Taxes: Unless otherwise indicated on the face hereof, all prices andcharges are exclusive of excise, sales, use, property, occupational or liketaxes which may be imposed by any taxing authority upon the manufacture,sale or delivery of the items sold hereunder. If any such taxes must be paidby Seller or if Seller is liable for the collection of such tax, the amount thereofshall be in addition to the amounts for the items sold. Buyer agrees to payall such taxes or to reimburse Seller therefore upon receipt of its invoice. IfBuyer claims exemption from any sales, use or other tax imposed by anytaxing authority, Buyer shall save Seller harmless from and against anysuch tax, together with any interest or penalties thereon which may beassessed if the items are held to be taxable.10. Indemnity For Infringement of Intellectual Property Rights: Sellershall have no liability for infringement of any patents, trademarks, copy-rights, trade dress, trade secrets or similar rights except as provided in thisPart 10. Seller will defend and indemnify Buyer against allegations ofinfringement of U.S. Patents, U.S. Trademarks, copyrights, trade dress andtrade secrets (hereinafter ‘Intellectual Property Rights’). Seller will defendat its expense and will pay the cost of any settlement or damages awardedin an action brought against Buyer based on an allegation that an item soldpursuant to this contract infringes the Intellectual Property Rights of a thirdparty. Seller’s obligation to defend and indemnify Buyer is contingent onBuyer notifying Seller within ten (10) days after Buyer becomes aware ofsuch allegations of infringement, and Seller having sole control over thedefense of any allegations or actions including all negotiations for settle-ment or compromise. If an item sold hereunder is subject to a claim that itinfringes the Intellectual Property Rights of a third party, Seller may, at itssole expense and option, procure for Buyer the right to continue using saiditem, replace or modify said item so as to make it noninfringing, or offer toaccept return of said item and return the purchase price less a reasonableallowance for depreciation. Notwithstanding the foregoing, Seller shallhave no liability for claims of infringement based on information provided byBuyer, or directed to items delivered hereunder for which the designs arespecified in whole or part by Buyer, or infringements resulting from themodification, combination or use in a system of any item sold hereunder.The foregoing provisions of this Part 10 shall constitute Seller’s sole andexclusive liability and Buyer’s sole and exclusive remedy for infringementof Intellectual Property Rights.If a claim is based on information provided by Buyer or if the design for anitem delivered hereunder is specified in whole or in part by Buyer, Buyershall defend and indemnify Seller for all costs, expenses or judgmentsresulting from any claim that such item infringes any patent, trademark,copyright, trade dress, trade secret or any similar right.11. Force Majeure: Seller does not assume the risk of and shall not be liablefor delay or failure to perform any of Seller’s obligations by reason ofcircumstances beyond the reasonable control of Seller (hereinafter ‘Eventsof Force Majeure’). Events of Force Majeure shall include without limitation,accidents, acts of God, strikes or labor disputes, acts, laws, rules orregulations of any government or government agency, fires, floods, delaysor failures in delivery of carriers or suppliers, shortages of materials and anyother cause beyond Seller’s control.12. Entire Agreement/Governing Law: The terms and conditions set forthherein, together with any amendments, modifications and any differentterms or conditions expressly accepted by Seller in writing, shall constitutethe entire Agreement concerning the items sold, and there are no oral orother representations or agreements which pertain thereto. This Agree-ment shall be governed in all respects by the law of the State of Ohio. Noactions arising out of the sale of the items sold hereunder or this Agreementmay be brought by either party more than two (2) years after the cause ofaction accrues.
9/91-P
The items described in this document and other documents or descriptions provided by Parker Hannifin Corporation, its subsidiaries and its authorizeddistributors are hereby offered for sale at prices to be established by Parker Hannifin Corporation, its subsidiaries and its authorized distributors. Thisoffer and its acceptance by any customer ("Buyer") shall be governed by all of the following Terms and Conditions. Buyer’s order for any such items,when communicated to Parker Hannifin Corporation, its subsidiary or an authorized distributor ("Seller") verbally or in writing, shall constitute acceptanceof this offer.
Offer of Sale
Web Site 3-D DrawingsMaster Table of Contents Search
North American customers seeking product information,
the location of a nearby distributor, or repair services
will receive prompt attention by calling the Parker
Product Information Center at our toll-free
number: 1-800-C-PARKER (1-800-272-7537). In
Europe, call 00800-C-PARKER-H (00800-2727-5374).
The Fluid ConnectorsGroup designs, manufacturesand markets rigid and flexibleconnectors, and associatedproducts used in pneumaticand fluid systems.
The Hydraulics Groupdesigns, produces and mar-kets a full spectrum of hy-raulic components and sys-tems to builders and users ofindustrial and mobile machin-ery and equipment.
The Automation Groupis a leading supplier of pneu-matic and electromechanicalcomponents and systems toautomation customers world-wide.
The Seal Group designs,manufactures and distributesindustrial and commercialsealing devices and relatedproducts by providingsuperior quality and totalcustomer satisfaction.
The Filtration Groupdesigns, manufactures andmarkets quality filtration andclarification products, provid-ing customers with the bestvalue, quality, technical sup-port, and global availability.
The InstrumentationGroup is a global leader inthe design, manufacture anddistribution of high-qualitycritical flow components forworldwide process instrumen-tation, ultra-high-purity, medi-cal and analytical applica-tions.
The Aerospace Group isa leader in the development,design, manufacture and ser-vicing of control systems andcomponents for aerospaceand related high-technologymarkets, while achievinggrowth through premier cus-tomer service.
The Climate & IndustrialControls Group designs,manufactures and markets sys-tem-control and fluid-handling components and sys-tems to refrigeration, air-condi-tioning and industrial custom-ers worldwide.
Web Site 3-D DrawingsMaster Table of Contents Search
Parker Hannifin CorporationPartek7075 East Southpoint RoadTucson, AZ 85706 USATel: (520) 574-2600Fax: (520) 574-2700http://www.parker.com/partek
Catalog 4182R03/05
Web Site 3-D DrawingsMaster Table of Contents Search