Page 1
This publication may be reproduced only in accordance with Edexcel Limited copyright policy. ©2005 Edexcel Limited.
Printer’s Log. No.
N21448AW850/R6242/57570 7/7/4/24,300
Paper Reference(s)
6242/01Edexcel GCEChemistryAdvanced SubsidiaryUnit Test 2Wednesday 8 June 2005 – MorningTime: 1 hour
Materials required for examination Items included with question papersNil Nil
Instructions to CandidatesIn the boxes above, write your centre number, candidate number, your surname, initial(s) andsignature.Answer ALL the questions in the spaces provided in this question paper.You may use a calculator. Show all the steps in any calculations and state the units.
Information for CandidatesThe total mark for this paper is 60. The marks for individual questions and parts of questions areshown in round brackets: e.g. (2). There are 16 pages in this question paper. All blank pages areindicated.A Periodic Table is printed on the back cover of this booklet.
Advice to CandidatesYou are reminded of the importance of clear English and careful presentation in your answers.You will be assessed on your Quality of Written Communication in this paper.
Turn over
Examiner’s use only
Team Leader’s use only
Question LeaveNumber Blank
1
2
3
4
5
6
Total
CentreNo.
Candidate No.
Surname Initial(s)
Signature
Paper Reference
6 2 4 2 0 1
*N21448A0116*
Page 2
2
BLANK PAGE
*N21448A0216*
Page 3
Leaveblank
3
Answer ALL questions in the spaces provided.
1. Aluminium is made from bauxite, which contains hydrated aluminium oxide. One of themain impurities in bauxite is iron(III) oxide.
During the purification of bauxite, 10 % sodium hydroxide solution is added.
(a) (i) State, with a reason, what happens to the aluminium oxide when the sodium hydroxide solution is added.
................................................................................................................................
................................................................................................................................
................................................................................................................................(2)
(ii) State, with a reason, what happens to the iron(III) oxide when the sodium hydroxide solution is added.
................................................................................................................................
................................................................................................................................
................................................................................................................................(2)
(b) After purification, the aluminium oxide is dissolved in molten cryolite. The mixtureis electrolysed.
(i) Why is it necessary to use cryolite?
................................................................................................................................(1)
(ii) From what material is the anode made?
................................................................................................................................(1)
(iii) Write the ionic equation for the reaction that takes place at the cathode.
................................................................................................................................(1)
(iv) State the major cost in the extraction of aluminium.
................................................................................................................................(1)
Turn over
Q1
(Total 8 marks)
*N21448A0316*
Page 4
Leaveblank
4
2. (a) There are two isomers of molecular formula C3H8O that are alcohols.
(i) Draw the full structural formulae of these isomers and name them.
Isomer 1 Isomer 2
Name Name
................................................... ....................................................(4)
(ii) When heated under reflux with potassium dichromate(VI) in dilute sulphuricacid, one of the isomers can be oxidised to give a compound C3H6O2. Draw thefull structural formula of this compound, C3H6O2. State the colour change youwould see during this reaction.
Structural formula
Colour change
................................................................................................................................(2)
*N21448A0416*
Page 5
Leaveblank
5
(b) (i) Both isomeric alcohols can be converted to bromoalkanes of molecular formulaC3H7Br. Give the reagents needed for this change.
................................................................................................................................
................................................................................................................................(1)
(ii) One of the bromoalkanes, X, reacts with potassium cyanide to produce acompound with molecular formula CH3CH(CN)CH3.
Identify X.
................................................................................................................................(1)
(iii) X reacts differently with potassium hydroxide in aqueous solution than inethanolic solution.
Give the structural formula of the product formed when the reaction is carriedout
in aqueous solution
in ethanol.
(2)
Turn over*N21448A0516*
Q2
(Total 10 marks)
Page 6
Leaveblank
6
3. The Contact Process is used to manufacture sulphuric acid. During this process, sulphur dioxide is mixed with excess air and passed over a heated catalyst. The followingreaction occurs:
2SO2(g) + O2(g) 2SO3(g) ∆H = –197 kJ mol–1
(a) Identify the catalyst used in this process.
.......................................................................................................................................(1)
(b) (i) State the temperature used in this process.
................................................................................................................................(1)
(ii) State and explain the effect on the rate of reaction of using a higher temperaturethan you suggested in (i).
................................................................................................................................
................................................................................................................................
................................................................................................................................
................................................................................................................................
................................................................................................................................
................................................................................................................................
................................................................................................................................(4)
(iii) State, with a reason, the effect on the yield of sulphur trioxide of using a highertemperature than you suggested in (i).
................................................................................................................................
................................................................................................................................
................................................................................................................................
................................................................................................................................
................................................................................................................................(2)
*N21448A0616*
Page 7
Leaveblank
7
(c) (i) State the pressure used in the Contact Process.
................................................................................................................................(1)
(ii) Justify the use of this pressure.
................................................................................................................................
................................................................................................................................
................................................................................................................................
................................................................................................................................
................................................................................................................................
................................................................................................................................(3)
(d) Describe how sulphur trioxide is converted into sulphuric acid.
.......................................................................................................................................
.......................................................................................................................................
.......................................................................................................................................
.......................................................................................................................................(2)
(e) Sulphuric acid reacts with ammonia to make the fertiliser ammonium sulphate. Writethe equation to represent this reaction.
.......................................................................................................................................(1)
(f) State ONE other important use of sulphuric acid.
.......................................................................................................................................(1)
Turn over
Q3
(Total 16 marks)
*N21448A0716*
Page 8
Leaveblank
8
4. But-1-ene undergoes the following reactions:
Reaction 1 Reaction 2CH3CH2CH2CH3 CH3CH2CH=CH2 Compound A
but-1-ene (major product)
CH3CH2CH(OH)CH2OH
(a) State the reagent and conditions needed for Reaction 1.
Reagent .........................................................................................................................
Conditions .....................................................................................................................(3)
(b) (i) The reagent in Reaction 2 is gaseous hydrogen bromide.
Draw the full structural formula of compound A.
(1)
(ii) What type of reagent is hydrogen bromide in this reaction?
................................................................................................................................(1)
*N21448A0816*
Reaction 3
Page 9
Leaveblank
9
(c) Identify the reagent needed for Reaction 3.
.......................................................................................................................................(1)
(d) But-1-ene can be used to make an addition polymer.
Draw the repeating unit of the polymer.
(2)
Turn over
Q4
(Total 8 marks)
*N21448A0916*
Page 10
Leaveblank
10
5. (a) Enthalpy changes can be calculated using average bond enthalpy data.
(i) The enthalpy change to convert methane into gaseous atoms is shown below.
CH4(g) → C(g) + 4H(g) ∆H = +1664 kJ mol–1
Calculate the average bond enthalpy of a C—H bond in methane.
(1)
(ii) Use the data in the table below and your answer to (a)(i) to calculate the enthalpychange for
2C(g) + 2H2(g) + Br2(g) → CH2BrCH2Br(g)
(3)
*N21448A01016*
BondAverage bond
enthalpy / kJ mol–1 BondAverage bond
enthalpy / kJ mol–1
C—C +348 H—H +436
Br—Br +193 C—Br +276
Page 11
Leaveblank
11
(b) The standard enthalpy of formation of 1,2-dibromoethane, CH2BrCH2Br, is–37.8 kJ mol–1.
Suggest the main reason for the difference between this value and your calculatedvalue in (a)(ii).
.......................................................................................................................................
.......................................................................................................................................
.......................................................................................................................................(1)
Turn over
Q5
(Total 5 marks)
*N21448A01116*
Page 12
Leaveblank
12
6. (a) 2,2,4-trimethylpentane, C8H18, is one of the hydrocarbons present in petrol.
(i) Draw the structural formula of 2,2,4-trimethylpentane.
(1)
(ii) To which homologous series does 2,2,4-trimethylpentane belong?
................................................................................................................................(1)
(b) (i) Define the term standard enthalpy of combustion.
................................................................................................................................
................................................................................................................................
................................................................................................................................
................................................................................................................................
................................................................................................................................(3)
(ii) Write the equation to represent the complete combustion of butane, C4H10.
................................................................................................................................(2)
*N21448A01216*
Page 13
Leaveblank
13
(c) The enthalpies of combustion of some compounds in kJ g–1 and kJ cm–3 are givenbelow.
(i) The standard enthalpy of combustion of butane is –2877 kJ mol–1.
Calculate the enthalpy of combustion of butane in kJ g–1.
(2)
(ii) Use the information in the table to compare the advantages and disadvantages ofthese three compounds as fuels for a motor vehicle.
................................................................................................................................
................................................................................................................................
................................................................................................................................
................................................................................................................................
................................................................................................................................
................................................................................................................................
................................................................................................................................
................................................................................................................................
................................................................................................................................
................................................................................................................................(4)
TOTAL FOR PAPER: 60 MARKSEND
*N21448A01316*
Compound ∆Hc / kJ g–1 ∆Hc / kJ cm–3
Butane, C4H10(g) –0.12
Ethanol, C2H5OH(l) –30 –21
2,2,4-trimethylpentane, C8H18(l) –48 –33
Q6
(Total 13 marks)
Page 14
14
BLANK PAGE
*N21448A01416*
Page 15
15
BLANK PAGE
*N21448A01516*
Page 16
16 *N21448A01616*