Page: 1Complex embedded solution L. Pavel, Elatec, April 15th, 2009 Complex embedded solution for Russia & ROE.

Page: 1 Complex embedded solution

L. Pavel, Elatec, April 15th, 2009

Complex embedded solutionfor Russia & ROE


Why

you should use

embedded PC board

?


Why embedded boardWhy embedded board

Standard PC board: Embedded PC board:

Specified for home and office usage Specified for more exciting applications

• Frequent changes in specifikation Stable technical specifikation

• Never ending re-design of application necessary No changes in design necessary

Availability only some months Long term availabe (min. 3-5 years)

No technical support Full technical support, BIOS adjustment etc

No direct connection to display panel Direct RGB/LVDS, two independent displays

Hardware optimized for office application Hardware modified for concrete applications


Standard PC board: Embedded PC board:

Commercial grade components used Industrial grade components usedTarget life time about 3 years Target life time about 8 yearsChip degrade significantly after 1 - 2 years Chip long-term stable

Components with rotating parts used No components with rotating parts used Rotating parts create potential problem No rotating parts – less problems Fan for coooling used Passive cooling – no fan HD for data used Compact flash or SSD

Embedded PC is more expensive but economize your servis costs

Why embedded board - ReliabilityWhy embedded board - Reliability


COMPLEX EMBEDDED SOLUTION


Give us your needs … … we provide concrete solution

We understand your applications We offer complex products Let us recommend you a solution Let us work for you

CONSULTANCY


EMBEDDED COMPUTING Single board computer (SBC) Box PC Panel PC


Single board computer, box PC, panel PC Some products with wide temperature range

Embedded computingEmbedded computing

ARM based mini single board computer Wide temperature range


Module + base board COM express 125 x 95 mm XTX 114 x 96 mm ETX 3.0 114 x 96 mm

PC/104 Size 96 x 90 mm Industry standard

Embedded computing - BoardsEmbedded computing - Boards


5,25“Single Board Computer (SBC) Size 203 x 146 mm More std. connectors (PCI, DDR …)

3,5“ Single Board Computer (SBC) Size 146 x 101 mm Few std. connectors (LAN, VGA, COM), rest via



PCI board - slot computing Full - Size 338 x 122 mm Half - Size 185 x 122 mm

Long Life Motherboard Mini ITX – 170 x 170 mm Micro ATX – 243 x 243 mm ATX – 304 x 243 mm Long life stable and available




ARM based mini single board computer (Micro9) ARM920T@200MHz up to 128MB SDRAM, 4 kB EEPROM, 2 x 16kB cash LCD/TFT/ CRT interface, max. 1280 x 768 Support 4/5/7/8 – wire resistive touchscreen OS Windows CE or Linux Wide operating temperature range Micro9-slim: 42,5 x 54 mm Micro9-mid: same as slim but with CAN, SPI, IC,

AC97 etc

85 x 54 mm Applications: small low power instruments with OS


Embedded computing – Box PCEmbedded computing – Box PC

Box PC Compact form Fanless system Complex shipment from one hand Wide temperature range Customization



Mobile DVR with 4/8 video inputs (Apollo)

NTSC, PAL Video compression MPEG-4 Anti-vibration, anti-shock, for using in

cars Fanless design Operating temperatur -25 to 55 °C

19“ 1U compact computer (Scorpio) Intel Core 2Duo/Pentium D/ Pentium 4 up to 2.13

GHz Up to 4GB Dual channel DDRII 6x Ethernet 1000, 2x USB, 4x SATA, 1x CF, 1x

mini PCI TPM 1.2 security Chip on board (optional) 2 x 16 char LCD display in front



Industry-temperature box (RuggCore) Intel Core™2 Duo 2.16GHz / Intel Celeron M/ AMD Scalable product Anti-Vibration: 5 grms / 5~500Hz / random

operation Anti-Shock: 50 g peak acceleration (11 ms

duration) Fanless design Operating temperature -20 to 60°C Multi-display output Application: factory automation, video server etc

HDMI DVI-I LVDS CF



HMI-box PC (Pandora) Isolated I/O Ports and CAN 2.0B Port AMD LX900 600MHz or Intel ATOM N270

1.6GHz Built-in alphanumeric LCD Module Fanless Applications: control unit for automation,

vehicles, transportation , tester equipment etc

Box PC (Phoenix – E200) Socket for low power Pentium M 1x VGA/LCD Easy HD instalation Smart Fan design 1x Earphone, 1 x Mic


Embedded computing – Panel PCEmbedded computing – Panel PC

Panel PC Complete PC with monitor and touch

screen Size 5,7“ – 10,4“ – 15“ – 17“ Fanless system Wide temperature range Sunlight readable models Options: Wi-FI, GPRS, GPS, OS



5,7“ Panel PC (Leo-500) Complete PC with monitor and touch screen AMD LX900 600MHz 32-bit x86 CPU Core 640 x 480 display with touch panel and 4

programmable keys Fanless cooling system Isolated I/O ports System data Recovery technology support Options: Sunlight readable, CAN, RFID reader

10,4“ Panel PC (Leo-1010) Complete PC with monitor and touch

screen Several chipsets and microprocessors 1024 x 768 display with 5 wire touch

panel IP 65 front panel



15” medical touch panel PC (LEO 1500) Mobile, modular and intelligent interactive terminal For healthcare, entertainment and interactive information Microphone and CCD camera for communication Smart Card Reader for security and billing applications Long-life battery 7200 mAh, wireless connections Certification UL/UN 60601-1

10,4“ Rugged Tablet PC (Hercules) Anti-Shock & Anti-vibration Sunlight readable, Option: touch

screen Input: typical PC inputs Temperature range: -40 to+ 60°C Application: military, aerospace etc



15”- 17” – 19” touch panel PC (Navpixel) Sunlight readable, 1000 nits Intel Core 2Duo 2.13 GHz Dual Independent Display on one screen COM2 is configurable to RS232/RS422/RS485 Power supply: AT and ATX mode IP65 Compliant Aluminum Front Bezel Design

Dual Independent LAN Ports Support In HMI application environments, many system integrator prefer dual independent LAN to allocate factory zone and data storage zone to reduce the network collision and crash, or virus infection.


IMAGING Display panel Monitor, open frame Touch screen AD board Invertor, optical filter


Imaging – Display panelImaging – Display panel

Monochrom display Resolution 320 x 240 Industrial temperature range WLED or CCFL backlight Grey/ Green/ Blue mode Positive/negative image

Color display (TFT panel) 2,5“ to 22“ Operating temperature -30 to + 80°C Brightness 400 – 2.200 cd/ m2

Sunlight readable WLED or CCFL backlight RGB/ LVDS interface Long-term and stable available



Industry designed TFT by Sharp Strong2 technology by Sharp Display designed and specified for industry

applications Shocks and vibrations are absorbed extremly well Backlight bright about 400 - 500 nits Wide viewing angle Operating temperature -30 to + 80°C

High bright and sunlight readable Brightness about 1000 nits Contrast 700 – 1200:1 Applications: outdoor, military, marine, petrol station

etc


Briliant in direct sunshine, low power Blanview exclusive technology Excellent readable in sunshine A little chromacity shift only Well readable with backlight off Low power compared to std display Ideal for hand held devices Size 2,7“ - 3,5“ - 4.3“ – 5,7“ – 6,5“

Standard display in direct sunshine Strong chromacity shift In sunshine difficulty readable High power consumtion (backlight)



Imaging – Display panel/optionsImaging – Display panel/options

Option Lamination of readability improving foils Lamination of touch screen – reduce

reflections, optimize readability in sunlight conditions

Lamination of antivandal front glass

Optical filter Antireflex, antiglare IR radiation reducing filter EMI reducing filter


Imaging – Sign panel and monitorImaging – Sign panel and monitor

Sign panel Size 32“ – 108“ Landscape/ portrait TFT panel or complete monitor 450 – 3.500 cd/ m2

WLED or CCFL backlight Life time typ. 60.000 hours High contrast Backlight brightness

customization

Proffesional sign monitor Basic features same as sign panel Designed for 24 hours operation Multi-screen capability up to 5x5

screens Image reversing, PinP /PbyP function Coming in 2009: LAN & HDMI interface


Imaging – Sign wallImaging – Sign wall

Typical solution

Litemax solution

Litille34 product Invisible frame of module Sunlight readable 1000 nits Modular, scalable


Imaging – Touch screenImaging – Touch screen

Resisitive Size 2,2“ to 19“ 4 or 5 wire USB/RS232 controler board Cheapest solution

Capacitive Size 6,5“ – 65“, USB/RS232 controler

board Industrial temperature range Mechanical rugged solution High transmissivity

Surface Acoustic Wave (SAW) Size 10,4“ – 23,1“, USB/RS232 controler board No stylus problem High transmissivity


Imaging – Driving boardsImaging – Driving boards

AD board Resolution from VGA to HD On Screen Display (OSD) board with buttons VGA or DVI-D input LVDS or RGB output Options: audio, YCB, light sensor control

Converting boards Convert several display standards VGA/DVI --> RGB/ LVDS LVDS --> RGB, RGB --> LVDS LVDS/ RGB --> DVI VGA --> TV-out LVDS --> 4x LVDS


Imaging - InvertorImaging - Invertor

Display CCFL and WLED invertor Encapsulated and open frame version Up to 3000:1 dimming ratio Industry temperature range High efficient 5 and 12V models Cross reference guide available

Display CCFL and WLED invertor Piezo-ceramic princip Low EMI Sinus wave output support long life of CCFL Cross reference guide available


Imaging - Display kitImaging - Display kit

Set of components from one hand

Controller board can be: AD board Single board computer (SBC) Board converting signals, for example from RGB to

LVDS etc


Imaging – MonitorImaging – Monitor

Open frame monitor 12,1“ – 15“– 17“– 19“ VGA or DVI input VESA standard Resistive or SAW touch screen USB/RS232 touch screen controler Dust proof (with SAW) Input voltage: 240V

Touch monitor 7“ – 8“ – 10,4“– 12,1“ – 15“– 17“– 19“–

19“wide VGA or DVI input All models with resistive touch screen 15“ – 17“ – 19“ with SAW touch screen USB/RS232 touch screen controler Input voltage: 240V


Imaging – Medical monitor Imaging – Medical monitor

Features Size: typical 19“ – 21“ Monochrom or Color Contrast typ. 700:1 Input: analog RGB, DVI Constant bright over life time

Applications Medical equipments


INPUT/ OUTPUT OEM printer modules Kyeboard & touch pad


Input/ output - Printer Input/ output - Printer

Front bezel

Retraction presenter

Features Complete OEM printer Paper width 2“ – 3“ – 4“ Print speed 150 or 200 mm/s Cutter 1 milion cuts Driving board USB or RS232 Autoloading system, openable head Option: bezel, presenter, paper holder max 200

mm

Printer with presenter and paper roll 200 mm (up and down pos.)


Input/ output - Printer Input/ output - Printer

Pinhole printer

Printer kit

Kiosk printerFront exchange of paper

Ticket printer

Pinhole printer


Stainless steel keyboards and trackballs USB or PS2 interface (RS232) Rear mounting or in shell 3DES encryption for ATM/ kiosk

Input/ output - Kyeboard Input/ output - Kyeboard


Memory Memory

MEMORY Compact Flash DRAM Hard disc Solid state disc (SSD)


Memory Memory

Compact Flash Commercial/ Industrial operating

temperature Low power, Power saving mode ATA or true IDE interface (fix disc or

removable)

Other memory DRAM Hard disc Solid state disc

Solid State Disk SSD 2.5” SATASolid State Disk SSD 2.5” SATA

Disk-On-ChipDisk-On-Chip IDE IDE

Solid State Disk USBSolid State Disk USB

Compact Flash cardCompact Flash card

SDRAM moduleSDRAM module


Service Service

Cable set BIOS adjustment Board customization Technical support

SERVICE


Thank you

Page: 1Complex embedded solution L. Pavel, Elatec, April 15th, 2009 Complex embedded solution for Russia & ROE.

Documents

embedded pc board

ssd embedded pc

concrete solution

complex products

os slide

single board computer

consultancy slide

computing arm