Technical Information Dyneon ™ Polymer Additive 5958 PA 5958 For use as a drip suppressant in flame retardant formulations Features • Improves drip suppres- sion in flame retardant polymer formulations • For melt strength improvement • Designed for latex blending • Manufactured using Dyneon™ADONA™ Emulsifier Typical properties* Property Test Method Unit Value Solid content DIN EN ISO 12086 % 59 Emulsifier non-ionic Emulsifier content (based on solid content) DIN EN ISO 12086 % 6,5 Average particle size DIN ISO 13321 m 160 pH DIN ISO 976 > 9 Viscosity D = 30 s -1 DIN EN ISO 3219 mPa-s 16 *typical values Processing The dispersion can be processed undiluted or diluted with distilled or deionised water. Supply form Standard Packaging Approx. Weight of dispersion (wet) approx. 30 liter plastic drum (7.9 US gallons) 40 kg (88 lbs) 30 gallon plastic drum 160 kg (350 lbs.) 1000 liter IBC container (264 US gallons) 1500 kg (3306 lbs) Storage and Material Handling This aqueous dispersion must be protected from freezing. It should be stored at temperatures between 5 °C – 30 °C (41 °F and 86 °F). Although it has a minimal tendency to settle, it is recommended at Dyneon dispersion be homoge- nized every month by slowly rolling for four hours on a drum roller.
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Technical Information
Dyneon™ Polymer Additive 5958 PA 5958 For use as a drip suppressant in flame retardant formulations
Features • Improves drip suppres-
sion in flame retardant polymer formulations
• For melt strength
improvement • Designed for latex
blending
• Manufactured using Dyneon™ADONA™ Emulsifier
Typical properties* Property Test
Method
Unit Value
Solid content DIN EN ISO 12086 % 59
Emulsifier non-ionic
Emulsifier content (based on solid content)
DIN EN ISO 12086 % 6,5
Average particle size DIN ISO 13321 m 160
pH DIN ISO 976 > 9
Viscosity D = 30 s-1 DIN EN ISO 3219 mPa-s 16
*typical values Processing The dispersion can be processed undiluted or diluted with distil led or deionised water. Supply form
Standard Packaging
Approx. Weight of dispersion (wet) approx.
30 liter plastic drum (7.9 US gallons) 40 kg (88 lbs)
30 gallon plastic drum 160 kg (350 lbs.)
1000 liter IBC container (264 US gallons) 1500 kg (3306 lbs)
Storage and Material Handling This aqueous dispersion must be protected from freezing. It should be stored at temperatures between 5 °C – 30 °C (41 °F and 86 °F). Although it has a minimal tendency to settle, it is recommended at Dyneon dispersion be homoge-nized every month by slowly rolling for four hours on a drum roller.
Dyneon™ PA 5958 Polymer Additive Safety/Toxicology To avoid potential hazards (including the evolution of toxic vapors) associated with processing this material, please read and follow the information on the product la-bel and in the Material Safety Data Sheet available to your Dyneon sales represen-tative before using the product. ISO 9001 Indicative of our commitment, most Dyneon design, development, production and service facilities have achieved global ISO 9001 quality management certification. One of our Decatur, Alabama sites and the remote functions in Oakdale, Minne-sota have achieved a QS-9000 certification for our quality management system. That Decatur, Alabama site and all Germany location, as well as the production fa-cilities at Antwerp, Belgium have also received ISO 14001 certification for their environmental management system. And, our Aston Pennsylvania PTFE custom compounding facility has A2LA accreditation for its quality control laboratory. Technical Information Technical information, test data and advice provided by Dyneon personnel are based on information and tests we believe are reliable and are intended for per-sons with knowledge and technical skil ls sufficient to analyze test types and con-ditions, and to handle and use raw polymers and related compounding ingredi-ents. No license under any Dyneon or third party intellectual property rights is granted or implied by virtue of this information. The present edition replaces all previous versions. Please make sure and inquire if in doubt whether you have the latest edition.
Important Notice All information set forth herein is based on our present state of knowledge and is intended to provide general notes regarding products and their uses. It should not therefore be construed as a guarantee of specific properties of the products described or their suitability for a particular applica-tion. Because conditions of product use are outside Dyneon’s control and vary widely, user must evalu-ate and determine whether a Dyneon product will be suitable for user’s intended application before using it. The quality of our products is warranted under our General Terms and Conditions of Sale as now are or hereafter may be in force. General recommendations on health and safety in processing, on work hygiene and on measures to be taken in the event of accident are detailed in our material safety data sheets. You will find further notes on the safe handling of fluoropolymers in the brochure "Guide for the safe handling of Fluoropolymers Resins" by Plastics Europe, Box 3, B-1160 Brussels, Tel. +32 (2) 676 17 32. © Dyneon 2009 Issued 03 /2009 Printed in Germany All Rights Reserved Dyneon GmbH Carl-Schurz-Str. 1 D-41453 Neuss Germany Phone: +49 2131 14 2265 Fax : +49 2131 14 3857 3M Belgium N.V. Canadastraat 11 Haven 2005 2070 Zwijndrecht / Belgium Phone: +32 3 250 7851 Fax: +32 3 250 7904 e-mail: [email protected]
www.dyneon.com Dyneon is a trademark of 3M. 98-0504-2435-1
Related Documents
