Owners Club SALES LIST VELOCE SPARES LTD. The Old Chapel, Cheney End, Huncote, Leics. LE9 3AD Website: velocespares.co.uk This Parts & Price List is for use by members of THE VELOCETTE OWNERS CLUB JUNE 2018 EDITION The parts that appear in this list are either in stock or they are shown as “On order” or “Hoping to be reordered soon”, based on the stock position at the time of printing. Where a part is listed as “Hoping to reorder soon” it is because a source is available, but either other parts are a greater priority for the currently available VSL volunteers or the part is believed to be readily available from the remaining Velocette parts suppliers as listed in the “Contacts” page of the Club’s website. New issues expected monthly - see them first on velocespares.co.uk Part number VSL376 Revised 24 May 2018 Price £2.00
18
Embed
Owners Club SALES LIST - Veloce Spares · PDF fileOwners Club SALES LIST VELOCE SPARES LTD. The Old Chapel, Cheney End, Huncote, Leics. LE9 3AD Website: This Parts &
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Owners Club
SALES LIST
VELOCE SPARES LTD. The Old Chapel, Cheney End, Huncote, Leics. LE9 3AD
Website: velocespares.co.uk
This Parts & Price List is for use by members of THE VELOCETTE OWNERS CLUB
JUNE 2018 EDITION
The parts that appear in this list are either in stock or they are shown as “On order”
or “Hoping to be reordered soon”, based on the stock position at the time of
printing. Where a part is listed as “Hoping to reorder soon” it is because a source is
available, but either other parts are a greater priority for the currently available VSL
volunteers or the part is believed to be readily available from the remaining
Velocette parts suppliers as listed in the “Contacts” page of the Club’s website.
New issues expected monthly - see them first on velocespares.co.uk
Part number VSL376 Revised 24 May 2018 Price £2.00
The Velocette Owners Club set up “Veloce Spares Limited” to help its members to keep on riding. It is ONLY AVAILABLE TO MEMBERS, therefore ALL ORDERS MUST INCLUDE YOUR MEMBERSHIP NUMBER. Using the VSL Sales List The original Velocette part number is used to identify the part wherever possible. Parts should be ordered by this part number, and VSL's Sales List is mainly in part number sequence. In addition, many special parts have been made at the request of members. These all have a part number starting VSL and they are clearly identified in the Sales List. It is therefore essential that you have a copy of the original Velocette Spare Parts List publication for your motorcycle. A copy of the original Velocette publication not only enables you to identify the part, but also, for models since the mid-1950's, it shows you how to assemble the parts correctly. Reprints of most of the original Velocette Spare Parts List publications are available from VSL, as are copies of the original Velocette Service Manuals. In the VSL Sales List - Part Numbers VSL102/ are Service Manuals, Part Numbers VSL104/ are Spares Lists. Please note that the presence of a part in the VSL Sales List does not mean it is currently on the shelf. Although most items are in stock, parts are bought or made in batches and this can only be done when the minimum order quantity is justified. Use the appropriate Order Form Your order should be entered on the appropriate VSL Order Form Order by Part Number not just by Description This makes the biggest single contribution to efficient use of our volunteers’ time. Any other method wastes precious time as they try and work out what you want, and if they guess wrong then everyone’s time is wasted. PLEASE INCLUDE DETAILS OF MODEL AND YEAR Ordering by Post Simply post your order to Veloce Spares Ltd, The Old Chapel, Cheney End, Huncote, Leicester LE9 3AD UK Ordering by e-mail Orders sent by e-mail must not contain your full Credit or Debit card number. Instead, you need to register your Card Number with VSL before e-mailing subsequent orders. For information on how to register and how to download a Registration Form see the VSL Website (velocespares.co.uk). VSL will confirm your registration by e-mail including all the information you need to order by e-mail. Once you have received confirmation of your registration you can use your word processor to complete and send your order. Post and Pack Post and pack is extra on all orders. Postage & Packing will be charged at cost once the parts have been packed and weighed. Payments Credit and Debit cards are strongly preferred. Maestro, Visa Credit and Debit, and MasterCard Credit and Debit are accepted. In addition to your Card Number and Expiry Date and your Name & Address it is necessary for you to provide the three digit Security Code from your card. It is usually on the back, near to the signature block, and possibly near to a repeat of all or part of your card number. If you have to use a cheque the payee should be "Veloce Spares Ltd" (not VOC ). For Mail Orders the cheque must be “open” as in this example or unfortunately it will have to be returned. The cheque must be endorsed with "Not to exceed £xx" rather than a specific amount. The endorsement must be written vertically within the crossed, A/C payee area. VSL can then complete the amount once the postage costs or price changes have been taken into account.
Delivery Please remember that the Spares Company is run entirely by volunteers. Volunteers deal with all the orders received by post, fax or e-mail on one day each week (usually a Thursday) and so you should allow for this when anticipating delivery. The Old Chapel does not have any permanent staff, so communication by telephone is not normally possible. Sensible Use of Parts Please note that it is the user's responsibility to ensure that the part is suitable for the intended use. Many of our replacement parts are precision manufactured on 'modern' CNC machines, but in some circumstances may still require a degree of skill when being installed on our elderly machines to achieve a satisfactory fit. Veloce Spares Limited and the Velocette Owners' Club cannot accept liability for any loss, damage or claims occurring through the use of parts or information provided and (save for death or personal injury arising from negligence) all such liability is hereby excluded. Huncote Spares Open Days: - Opening time is 9:30 am to 3.00 pm with no break at lunchtime. Our over-the-counter spares service will be available to members on the following days: (non-members are very welcome and may join on the day)
Sunday 14 January 2018 Sunday 11 February 2018 Saturday 10 March 2018
Sunday 8 April 2018 Sunday 6 May 2018 Saturday 9 June 2018
Sunday 8 July 2018 Sunday 12 August 2018 Sunday 16 September 2018
Sunday 14 October 2018 Saturday 10 November 2018 Sunday 9 December 2018
Huncote has to be reached using some minor roads. Although it is surrounded by the M1, M69 and M6 it is not "on the motorway". Please note that junction 2 of the M69 does not have an exit for those traveling towards Leicester; instead leave at junction 1 and go down the A5 then up the B4114 until you see the signs to Croft. From junction 21 of the M1 first go back towards Leicester, then back on yourself at the next roundabout and onto another roundabout where you can at last come down the B4114 until Narborough where you will see signs for Huncote. THERE IS NO PARKING AT OR BEYOND THE OLD CHAPEL FOR CARS, VANS, ETC. Instead, please park in the large car-park of the Red Lion or the main street in front of it, or in the first few yards of Cheney End. There is limited parking for motorcycles, preferably Velocettes, on the forecourt of the Old Chapel.
Page 4
Part Number Description Other Information Price
PUBLICATIONS
VSL376 SPARES LIST Sales List sent separately (i.e. with no other parts) costs
£3.00 for UK (please pay with stamps), £5.00 for Europe and £6.00 for Rest of the World (postage included in all cases).
£2.00
VSL100 HAYNES MANUAL - VM,VR,MSS ETC £17.50
VSL101/D INSTRUCTION BOOK - RIGID MSS The Rider's handbook (not the full service manual) £6.00
VSL102/A SERVICE MANUAL - VM,VR,MSS £12.95
VSL102/C SERVICE MANUAL - SWING ARM MAC £9.50
VSL102/E SERVICE MANUAL - MK2 KSS & KTS £12.75
VSL102/F SERVICE MANUAL - RIGID MAC & MOV £10.60
VSL102/G SERVICE MANUAL - MK1 KSS Hoping to reorder soon £8.00
VSL102/H INSTRUCTION BOOK - GTP The Rider's handbook, and also includes servicing information
£8.00
VSL104/A SPARE PARTS LIST - VM,VR,MSS etc £10.25
VSL104/C SPARE PARTS LIST - S/ARM MAC £7.95
VSL104/D SPARE PARTS LIST - RIGID MSS £7.95
VSL104/E SPARE PARTS LIST - MK2 KSS & KTS £11.25
VSL104/F SPARE PARTS LIST - RIGID MAC & MOV £8.75
VSL104/G SPARE PARTS LIST - MK1 KSS Hoping to reorder soon £8.00
VSL104/H SPARE PARTS LIST - GTP £8.00
VSL156A 24HOUR POSTER FULL SIZE Replica - approx 46cm wide by 69cm high £6.50
VSL158/DVD DVD GEARBOX REBUILD How to assemble …. By the late Dave Allcock £15.00
VSL159/DVD DVD ENGINE REBUILD How to assemble …. By the late Dave Allcock £15.00
VSL160 CALENDAR 1999 From the VOC France Section £3.00
VELOCETTE PART NUMBERS
A15/19 REAR MUDGUARD FRONT PIECE Not stocked - See VSL041
A22/13 NUMBER PLATE (RIGID MODELS) MOV/MAC/MSS/KSS MK2 up to 1939 - Hoping to reorder soon
£30.00
A22/20 NUMBER PLATE Rigid MOV/MAC/MSS post 1940. Also early s/arm MAC & MSS - Hoping to reorder soon
£26.50
A23 FRONT NUMBER PLATE All models £6.00
A27/6 PRIMARY CHAIN 75 LINKS £36.50
A28/4 SECONDARY CHAIN 108 LINKS £48.00
A28/8 SECONDARY CHAIN 124 LINKS £47.00
A34 5/16 BALL BEARINGS For front wheel £0.35
A37/2D OIL JET SEALING WASHER Bonded rubber inside metal £0.50
A37/5 1/4 INCH ALLOY SEALING WASHER See also A37/5D £0.18
A37/5D 1/4 INCH DOWTY SEALING WASHER Bonded rubber seal inside metal £0.22
F282 T/FORK SPRING DUST COV BUFFER Dust cover rubber buffer for telescopic forks £1.10
F284/2 PRI CH/CASE W BEADING per correct length £10.50
F285 CHAINCASE O-RING SMALL BOSS Crankcase to chaincase 'O' ring seal for small boss (MAC & MSS to 12078)
£1.00
F285/2 CHAINCASE O-RING LARGE BOSS For VM, VR, VMT also MSS from 12079 £0.95
F291 FELT STRIP, REAR C/GUARD £0.60
F292 CENTRE STAND PIVOT £4.35
F295 SUSPENSION UNIT TOP RUBBER Top rubber and steel sleeve for a single suspension unit £5.00
F301 TRUNNION SHAFT FELT SEAL Not stocked - use F301A
F301A TRUNNION SHAFT GREASE SEAL Bonded rubber seal substitute for felt £1.80
F303 REAR MUDGUARD STAY SPACER Stainless £1.80
F309 PRIMARY C/CASE FELT RING Please use F309A
F309A PRIMARY C/CASE NITRILE SEAL Medium hardness nitrile rubber seal (replaces earlier neoprene and silicone versions). Preferably needs to be bonded into the groove, & oiled on assembly.
£9.30
FA1/3 TRUNNION SHAFT Stainless £22.50
FA3/5 TRUNNION BUSH, NYLON/METAL TYP Acetyl copolymer. After fitting, ream for very tight fit £4.25
FA47 REAR CHAIN ADJUSTER S/A 1/4 BSF nut not included, order a VSL333 £3.00
FA122 FRT M/GD DIST PCE VMT. £2.50
FB11/5 FRONT BRAKE CAM LEVER Stainless £5.00
FB21/3 FRONT WHEEL SPINDLE MOV/MAC to '38 £4.40
FB54 FRONT BRAKE COTTER SHACKLE Stainless £2.25
FB61 FELT FOR BRAKE SHACKLE PIN £0.39
FK19/2 GEARBOX ADJUSTER £5.50
Page 7
Part Number Description Other Information Price
FK23/2 SQUARE F/REST BAR £19.70
FK23/10 FOOTREST BAR Square bar, 4.75" long overall, Right-hand side, Rigid models from 1942
£4.25
FK23/11 FOOTREST BAR Square bar, 3" long overall, Left-hand side, Rigid models from 1942
£3.75
FK23/14 FOOTREST BAR Square bar, S/Arm models, fits either side, priced per single side
£5.90
FK26&FK27 FRONT/ REAR ENGINE PLATE SET For Mk 1 KSS models £42.50
FK43 BRAKE ROD THREADED TRUNNION Stainless £4.30
FK43/2 BRAKE ROD TRUNNION, PLAIN Stainless £3.75
FK50/2 BRAKE TORQUE BOLT High tensile stainless steel £5.00
SL8/5 1/4 BSF X 3/4 HEX SCREW Consider cutting down VSL322A
SL8/3 1/4 BSF X 9/16 DOME HEAD BOLT Hoping to reorder soon £1.80
SL8/4 1/4 BSF X 1/2 DOME HEADED BOLT £1.80
SL8/5A 1/4 BSF X 3/4 DOME HEADED BOLT £1.80
SL8/16 BOLT 1/4 BSW X 1 INCH Please order VSL322A
Page 12
Part Number Description Other Information Price
SL8/17 BOLT 1/4 BSW X 1 1/4 INCH Please order VSL322B
SL8/21 BOLT 1/4 BSW X 1 3/4 INCH Please order VSL322C
SL8/22 BOLT 1/4 BSW X 11/16 INCH Consider cutting down VSL322A
SL9/3 OIL TANK FIXING BOLT Stainless £3.00
SL9/18 5/16 BSF X 2 3/4 BOLT Please order VSL326
SL9/19E KSS MK2 CYL HD BOLT EXTENDED Heads extended by about 1.5", they protrude above fins to avoid spanner damage. Made in high-tensile steel, but could easily be shortened.
£9.60
SL9/22 5/16 BSF X 1 1/2 HEX BOLT Please order VSL320
SL11/1 REAR ENG PLATE BOLT & G/BOX Stainless £4.65
SL11/1/B REAR ENG PLATE & G'BOX BOLT Blackened H-T Steel - Hoping to reorder soon £2.25
SL11/2 FRONT ENGINE PLATE BOLT Stainless £4.96
SL11/2/B FRONT ENGINE PLATE BOLT Blackened H-T Steel - Hoping to reorder soon £2.30
SL11/15 KICKSTART PIVOT BOLT Stainless £2.85
SL30/12 BRAKE ROD KSS/MSS RIG 23 INCH Stainless - Hoping to reorder soon £14.00
SL30/24 CR/CASE STUD 1/4 X 2-7/16 Plated £0.90
SL30/37 BRAKE ROD, MOV/MAC 27 INCH Stainless £10.87
SL31/17 CENTRE STAND PIVOT STUD Stainless £5.50
SL32/5 MAGNETO STUD MK1 K Blackened H-T Steel - Hoping to reorder soon £1.15
SL56/5 5/16 CYCLE THREAD NUT Please order VSL337
SL56/6 5/16 CYCLE THRD NUT-SMALL HEX Suitable for magneto nuts on early engines £1.20
SL56/8 3/8 CYCLE THREAD NUT Please order VSL340
SL56/9 REAR WHEEL NUT MK1 K Blackened H-T Steel £1.40
SL56/13 5/16 BSW NUT WITH SMALL HEX Used on magneto flange and gearbox adjuster £2.60
SL56/19 MAGNETO NUT MK1 K Blackened H-T Steel £1.20
SL56/32 MAINSHAFT NUT - TIMING SIDE Left hand thread £2.50
SL56/33 5/16 CEI 1/4 HEX G/BOX SEL BAR £1.40
SL56/33/B TAPPET NUT/GEAR SEL ROD NUT Blackened H-T Steel £1.20
SL71/1 MAINSHAFT S/ABS NUT COTTER PIN £0.25
SL71/2 1/16'' X 1/2'' SPLIT PIN £0.20
SL80/21 SCREW 2BA X 1/4 INCH For Voltage Regulator Box - Hoping to reorder soon £0.30
SL80/22 SCREW 2BA X 3/8 INCH Chaincase screw and timing cover oil jet £0.40
SL80/22A SOCKET SCREW 2BA X 1/2 INCH Primary chaincase £0.75
SL102/13A OIL TANK FILTER STUD Stainless £5.00
SL109/6 BOLT 5/16 BSF X 2 INCH Please order VSL325
SL109/10 5/16 BSF X 1 1/4 BOLT Please order VSL302B
SL109/11 BOLT 5/16 BSF X 1 5/8 INCH Please order VSL324
SL109/15 5/16 BSF X 3 HEX BOLT Please order VSL327
SL110/2 BOLT 3/8 BSF X 1 1/4 INCH Please order VSL328
SL110/3 BOLT 3/8 BSF X 1 5/8 INCH Please order VSL329
SL110/4 BOLT 3/8 BSF X 1 29/32 INCH Please order VSL329A
SL110/8 3/8 IN X 2 IN U/H BOLT FK TOP Please order VSL329A
75P BOT SPIN L/W EARLY MOV/MAC MOV 1933-36, MAC 1933-36, GTP to 1936. Bottom front and rear fitment. Double sided damper. 7/16 dia x 8 1/2 long.
£11.50
75/2P WEBB BOT SPIN L/W FORK MOV 1937-38, MAC 1937-38, GTP. Bottom front fitment. Single sided damper. Thin links. 7/16 dia x 9" long.
£11.50
75/3P WEBB L/WT BOT REAR S/DAMP MOV 1937-38, MAC 1937-38, GTP. Bottom rear fitment. Single sided damper. Thin links. 7/16 dia x 8 1/4 long.
£11.50
75/4P WEBB FORK SPINDLE - L'WT MOV 1939-47, MAC 1939-47. Bottom front fitment.
Single sided damper. Thick links. 7/16 dia x 9 1/2 long
£15.75
75/5P WEBB FORK SPINDLE - L'WT MOV 1939-47, MAC 1939-47. Bottom rear fitment. Single sided damper. Thick links. 7/16 dia x 8 3/4 long.
£15.75
VSL051 WEBB SPINDLE NUTS VARIOUS £1.90
VSL171 FRICT DISC BLANK 3.25 ROUND To make your own friction disk - Hoping to reorder soon £4.85
Page 14
Part Number Description Other Information Price
SPECIALS FROM VELOCE SPARES
ELECTRICAL
38ET MILLER REP T/LAMP S/A 6V BULB £14.00
H35 BEARING RETAINING PLATE £0.55
H37 DYNO THRU BOLTS SHORT £0.55
H41 BRUSH SPRING POS/NEG STATE? State whether for positive or negative £0.35
H46 BRASS TERMINAL EXTENSIONS £0.25
L564 LUCAS 564 REP. R/ LIGHT,12V £12.00
L564G LUCAS 564 GENUINE R/LIGHT, 12V Genuine Lucas £26.50
MT210 REPLICA LUCAS TAIL LIGHT Hoping to reorder soon £16.80
VSL060 LUCAS MAG CAP CHROME £3.30
VSL065A K1F PICKUP GASKET Hoping to reorder soon £0.45
VSL067A LUCAS SLIP RING £9.91
VSL070 MILLER REPLICA HEADLIGHT SWITC 3 Position dim-off-full £45.00
VSL073 MILLER REPL. HORN /DIP-SWITCH £12.50
VSL075 REPLICA MILLER AMMETER 2" £25.50
VSL075A RUBBER MOUNT'G RING FOR AMMET £0.50
VSL075D MILLER REPLICA 2" DEEP TYPE British made product £23.00
VSL076 MILLER REP.''STOP'' LIGHT,12V £19.95
VSL076L MILLER LENS, ROUND TAIL LIGHT This replica part fits the cicular "Stop" type rear light fitted to some of the rigid models, 2 1/2 ins diameter.
£5.95
VSL081 WIRING CABLE Available: Black, Blue, Brown, Red, Yellow, Green or
VSL351M WIRING LOOM. ORIG PATT MILLER. For Miller Dynamo combined with Miller switch, an exact replica of original in a plastic sheath, as were most but not all post-war models.
£38.00
VSL352 WIRING LOOM COIL PLASTIC For Coil Ignition system £38.00
VSL352A WIRING LOOM COIL BRAIDED For Coil Ignition system - Hoping to reorder soon £24.00
VSL391 REPLICA MILLER 6 1/2 H/L RIM Does not include sprung toggle fixing, see VSL393 £19.85
VSL392 REPLICA MILLER 7 INCH H/L RIM Does not include sprung toggle fixing, see VSL393 £19.85
VSL393 H LAMP RIM CLIP Replica in Stainless - complete set of parts for sprung toggle 'wing' clip
£10.95
VSL453 1 1/2 INCH REAR REFLECTOR Chromed bezel £6.20
VSL460 STOPLIGHT SWITCH Could replace Miller switch by modifying bracket £5.88
VSL146 SPEEDO CHRONO FRONT WHEEL Speedometer, chronometric, front wheel, 2'-4", with spade
drive
£11.50
VSL147 TACHO CHRONOMETRIC Tachometer, chronometric, with spade drive £12.00
VSL148 TACHO MAGNETIC Tachometer, magnetic, with spade drive £12.00
VSL149 SPADE FOR VSL146, SPEEDO,CHRO £3.10
VSL180 CLUTCH CABLE BOOT- G/BOX END Waterproof gaiter for clutch cable at gearbox - Hoping to reorder soontower
£1.00
VSL181 SMALL CABLE GAITER Small universal rubber cable boot £0.50
GASKET SETS
VSL009 GASKET SET IRON MAC/MOV £18.00
VSL010 ALLOY MAC GASKET SET £19.50
VSL011 KSS MK2 GASKET SET £20.98
VSL012 VM/MSS GASK SET Includes reinforced rocker box gasket £26.00
VSL154 VIPER GASKET SET Includes reinforced rocker box gasket £20.40
VSL155 THRUXTON GASKET SET Includes reinforced rocker box gasket £24.00
VSL099 GASKET PAPER 0.25MM X A4 Cut your own unobtainable gaskets. £0.75
Page 16
Part Number Description Other Information Price
CARRIERS
VSL003 PANNIER FRAME Fits S/arm models only. See also pannier bags, VSL169 &
170 - priced per single side, please order L or R. £61.50
VSL003/SS PANNIER FRAME - STAINLESS As VSL003 but in Stainles Steel - Priced per Single Side £72.50
VSL004 CARRIER FOR 3.5G TANK For use on bikes with 3 1/2 gallon tank and standard pannier frames already fitted; unless you make your own support brackets
£37.00
VSL004/SS CARRIER FOR 3.5G TANK IN SS As VSL004 but in SS £45.00
VSL005 CARRIER FOR 4G TANK For use on bikes with 4 1/4 gallon tank and standard pannier frames already fitted; unless you make your own support brackets
£37.00
VSL005/SS CARRIER FOR 4 G TANK IN SS As VSL005 but in SS £45.00
DYNAMO TOOTHED BELT DRIVE CONVERSIONS
A range of engine pulleys, dynamo pulleys and belts which can be mixed and matched to
suit MOV, MAC, All MSS, VR, VM, VMT & KSS MkII and provide two dynamo speed options
for any of these models.
YOU NEED TO TELL US WHICH MODEL you want to fit the conversion to and whether
you want the dynamo to run at 1.1 x engine speed or 1.25 x engine speed.
Originally, MSS after engine number 12914, VR after 3605 and VM after 5049 probably had
larger dynamo pulleys (60w dynamo and longer belt E16/4) to give a slower dynamo speed.
Otherwise 36w dynamos can be run faster.
Items can be ordered separately, but for kits just tell us your Model and Speed choice
VSL380 ENG PULLEY 40T VM/MSS/VR/VMT All MSS/KSS/VM/VR - Hoping to reorder soon £38.45
VSL381 ENG PULLEY 40T MOV\MAC MAC/MOV £38.45
VSL382 DYNO PULLEY 32T For faster dynamo speed option £29.90
VSL383 DYNO PULLEY 36T For slower dynamo speed option £32.40
VSL384 TOOTHED BELT 90T For VSL381 + VSL382 £11.40
VSL385 TOOTHED BELT 95T For VSL381 + VSL383 OR VSL380 + VSL382 £11.80
VSL386 TOOTHED BELT 100T For VSL380 + VSL383 £12.30
VSL388 DYNO PULLEY 36T FOR 13 MM SHAFT Keywayed shaft for Alton alternator and Lucas Dynamo £35.40
FLEXIBLE PIPE & FITTINGS
VSL396 OIL PIPE 3/8 INCH BORE - RUBBER Black rubber (with specification printed along length),
proper fuel/oil resistant with thick reinforced walls- 11/16 inch O.D., priced per yard
£5.00
VSL397 OIL PIPE 5/16 INCH BORE - PLASTIC Clear PVC with braided reinforcement, 1/2 inch O.D., priced per yard
£2.10
VSL398 OIL PIPE 3/8 INCH BORE - PLASTIC Clear PVC with braided reinforcement, 5/8 inch O.D., priced per yard
£2.50
VSL399 OIL PIPE 5/16 INCH BORE - RUBBER Black rubber (with specification printed along length),
reinforced, proper fuel/oil resistant, 19/32 inch O.D., priced per yard
£4.50
VSL400 PET.PIPE 1/4 INCH BORE - PLASTIC Clear PVC with braided reinforcement, 15/32 inch O.D., priced per yard
£2.10
VSL401 FERRULE .41 INCH INSIDE For 3/8" Outside Diameter pipe £0.95
VSL402 FERRULE .525 INCH INSIDE For 1/2" Outside Diameter pipe £0.85
VSL403 UNION NUT 1/4 BSP Use with VSL408 £0.95
VSL404 FERRULE .625 INCH INSIDE For 5/8" Outside Diameter pipe £0.95
VSL406 FUEL TAP DOWTY WASHER Dowty washer 1/4" BSP £0.85
VSL408 STRAIGHT SPIGOT - 1/4 For 1/4" bore piping & petrol taps below, use with VSL403
£0.95
VSL409 SPIGOT ELBOW 1/4 BSP For petrol tap below, includes nut £4.60
VSL410 T-PIECE For 1/4" bore petrol pipe £4.20
VSL411 PETROL TAP 1/4 BSP PUSH/PUSH Brass nickel plated, Teflon coated with round knurled pull on fitted with filter
£25.00
VSL411A PETR0L TAP 1/4 BSP PUSH ON/OFF Hoping to reorder soon £18.40
VSL414 PETROL TAP 1/4 BSP LEVER TYPE Brass with round lever fitted with filter £26.75
VSL420 LEVER TYPE PETROL TAP Marked OFF/ON. Non-original, functional,die cast alternative tap with filter
£7.80
VSL421 LEVER TYPE PETROL TAP. RESERVE Marked OFF/RES. Non-original, functional,die cast alternative tap with filter.
£7.80
Page 17
Part Number Description Other Information Price
FASTENERS
VSL023 4 IN PLASTIC CABLE TIE £0.02
VSL079 5 1/2 IN PLASTIC TIE £0.03
VSL080 12" PLASTIC CABLE TIE £0.08
VSL024 15 IN PLASTIC CABLE TIE £0.12
VSL315 2BA X 1/2 LONG HEX HEAD SCREW Stainless - Hoping to reorder soon £0.50
VSL300 1/4 BSF X 3/8 HEX SCREW PLATED Plated £0.68
VSL316 1/4" BSF X 1/2" LONG HEX SCREW Stainless £1.20
VSL300A 1/4 BSF X 5/8 HEX SCREW PLATED Plated £0.68
VSL316A 1/4BSF X 3/4 LONG HEX SCREW Stainless - use as SL8/5 £1.30
VSL316B 1/4 BSF X 1 HEX BOLT Stainless £0.85
VSL301 1/4 BSF X 1 1/8 HEX BOLT PL Plated £0.25
VSL317 1/4" BSF X 1 1/4" HEX BOLT Stainless £1.30
VSL301A 1/4" BSF X 1 1/2" HEX BOLT Plated £0.25
VSL301B 1/4 BSF X 1 1/4 HEX BOLT PLATE Not high tensile. Zinc plated. £0.12
VSL318 1/4" BSF X 1 1/2" HEX BOLT Stainless £1.40
VSL319 1/4" BSF X 1 3/4" HEX BOLT Stainless £1.90
VSL316W 1/4 BSW X 1/2 SCREW Stainless £0.30
VSL322A 1/4 BSW X 1 HEX SCREW Stainless - use as SL8/16 or cut down for SL8/6 or SL8/22 - Hoping to reorder soon
£0.80
VSL322B 1/4 BSW X 1 1/4 HEX BOLT Stainless - use as SL8/17 £0.90
VSL322C 1/4 BSW X 1 3/4 HEX BOLT Stainless - use as SL8/21 £1.10
VSL321 5/16" BSF X 3/4" HEX SCREW Stainless £1.18
VSL302 5/16" BSF X 7/8" HEX BOLTS Plated £0.30
VSL302A 5/16 BSF X 1 1/4 HEX SCREW PL £0.30
VSL302B 5/16 BSF X 1 1/4 HEX SCREW Stainless - use as SL109/10 £2.70
VSL320 5/16" BSF X 1 1/2" HEX BOLT Stainless - use as SL9/22 £3.35
VSL324 5/16 BSF X 1 5/8 HEX BOLT Stainless - use as SL109/11 £1.95
VSL325 5/16 BSF X 2 HEX BOLT Stainless - use as SL109/6 £2.50
VSL326 5/16 BSF X 2 3/4 HEX BOLT Stainless - use as SL9/18 £4.20
VSL327 5/16" BSF X 3" HEX BOLT Stainless - use as SL109/15 £3.37
VSL304 3/8" BSF X 1 1/4" BOLT Plated £0.40
VSL328 3/8 BSF X 1 1/4 HEX SCREW Stainless - use as SL110/2 £1.80
VSL329 3/8 BSF X 1 3/4 HEX BOLT Stainless - use as SL110/3 £3.60
VSL329A 3/8 BSF X 2 HEX BOLT Stainless - use as SL110/4 and SL110/8 £2.50
VSL331 2BA NYLOC NUT £0.45
VSL332 2BA NUT Stainless £0.17
VSL332B 2BA NUT BRASS Brass £0.20
VSL330 3/16 WHIT NUT. PLATED. Plated - for rear light units £0.05
VSL333 1/4" BSF NUT Stainless £0.30
VSL334 1/4" BSF NYLOC NUT Stainless £1.80
VSL335 5/16" BSF NUT Stainless £0.75
VSL336 5/16" BSF NYLOC NUT Stainless £2.25
VSL337 5/16 CYCLE THREAD NUT Stainless - use as SL56/5 £0.95
VSL338 3/8" BSF NUT Stainless £0.40
VSL340 3/8 CYCLE THREAD NUT Stainless - use as SL56/8 £0.95
VSL341 7/16" BSF NUT Zinc plated £0.75
VSL341A 7/16 BSF NYLOC NUT Zinc plated £1.95
VSL343 2BA PLAIN WASHER Stainless £0.05
VSL343K 3/16 SHAKEPROOF WASHER Stainless £0.09
VSL354 3/16 PLAIN WASHER PLATED Plated £0.03
VSL335B 5/16 BSF CASTELLATED NUT Not plated. £0.15
VSL345L 5/16 SINGLE COIL LOCK WASHER Stainless £0.08
VSL310 3/8 FLAT WASHER PLATED Plated £0.08
VSL314 2BA X 7/8 CHEESE HD SCREW Mild steel. Not Plated. £0.10
VSL346 3/8 PLAIN WASHER Stainless £0.08
VSL346K 3/8 SHAKEPROOF WASHER Stainless £0.15
VSL346L 3/8 SINGLE COIL LOCKWASHER Stainless £0.20
Page 18
Part Number Description Other Information Price
VSL347 7/16" PLAIN WASHER Stainless £0.17
VSL347K 7/16 SHAKEPROOF WASHER Stainless £0.25
VSL347L 7/16 SINGLE COIL LOCKWASHER Stainless £0.25
VARIOUS
When ordering items such as fork spindles or nuts, it is well worth sending us a sample
VSL001 TOOLBOX KNOB ONLY Polished stainless steel but without securing washer - Hoping to reorder soon
£8.00
VSL007 PETROL TANK CAP £14.75
VSL008 OIL TANK CAP VENTED £14.00
VSL008A OIL TANK CAP NON VENTED £14.00
VSL013 REAR WHEEL DUST COV 3 HOLE Hub must be bare (no spokes) to fit £18.80
VSL014 SPACER TUBE FOR VSL 013 In stainless steel for use with new dust covers VSL 013 £3.50
VSL019 PAPER OIL FILTER KIT COMP Complete with element, fits all S/Arm models with no external modifications.
£32.50
VSL020 PAPER OIL FILTER ELEMENT £13.25
VSL036 F/MUDGUARD MOV/MAC/KTS/RIG MSS Replica of KA 16/5 in strong fibreglass. Not sent by mail
(except at your risk)
£50.00
VSL037 INTERNAL GEARBOX LINKAGE KIT Spherical rod-end joint kit. Fits all swing arm models - no mods necessary
£27.70
VSL039 REAR MUDGUARD TAILPIECE F/G MAC/MSS S/Arm equivalent to MAS85, in fibreglass for use with VSL041. Not sent by mail (except at your risk).
£12.00
VSL041 R/MUDGUARD MAC/MSS S/ARM F/G Equivalent to A15/19 in fibreglass, use tailpiece VSL039. Not sent by mail (except at your risk).
£38.50
VSL044 BRKT FOR REAR F/G M/GUARD Hoping to reorder soon £4.90
VSL052 DAMPER NUTS Send us a drawing in case we can match what you need £4.90
VSL094 BRASS CAGE LESS ROLLERS Replaces MAS57, requires 14 of rollers VSL095. Laser cut for accuracy; some roller slots will require slight scraping or filing to remove heat splatter and laser entry
ridge.
£7.95
VSL095 3/16 X 3/16 ROLLERS For use in VSL094 £0.16
VSL098 LUGS FOR PR. CH/CASE BAND Bare casting, priced in units of one £2.30
VSL103 EXCHANGE BRAKE SHOES Only available at Huncote counter, not by mail order - your old shoes must be a pair, in good condition and with undamaged bearing surfaces.
£28.80
VSL107 5/8 X 3/8 1 1/2 LINK Two links, one with cranked plates to give 'two inners' £3.50
VSL108 5/8 X 3/8 JOINING LINK £2.50
VSL110 1/2 X 5/16 1 1/2 LINK Two links, one with cranked plates to give 'two inners' £4.00
VSL111 1/2 X 5/16 JOINING LINK £2.00
VSL115 SLEEVE GEAR NUT TOOL £19.75
VSL116 MAIN SADDLE SPRINGS PAIR For rigid models £32.00
VSL117 FLEXIBLE MOUNTINGS Hoping to reorder soon £0.30
VSL150 CLUTCH FRICTION PLATE Hoping to reorder soon £12.90
VSL151 CLUTCH PLAIN PLATE £7.25
VSL152 CLUTCH CHAINWHEEL For 9-plate clutches - Hoping to reorder soon £130.00