Product Code: RPLATS THE PACKAGE CONTAINS 1 x OVHD Recoder 1 x OVHD Remote 1 x Power Supply 1 x RCA Cables 1 x OVHD User Manual If you already have a dish, connect it to your OpenView HD Decoder Activate and Enjoy! OVHD Satellite Decoder 0.75 160 257 77 PACKAGE DIMENSIONS Weight (kg) (mm) (mm) (mm) Width Height Length Additional Information OpenView HD is compatible with any satellite dish. The OpenView HD satellite TV service sits on both the IS-20 and SES-5 satellites, which means it is now even easier for you to get OpenView HD if you already have a satellite dish installed. Simply put, if you have an installed dish, that has been used to receive DStv, Freevision, StarSat/Top TV or Vivid, you can now use the same dish to receive OpenView HD. To connect your decoder to your dish: Connect the cable from the dish to the LNB-IN port and switch the OpenView HD decoder ON. The decoder will pick up the OpenView HD signal automatically. You will need to activate the decoder by following the instructions in the box to start receiving your free entertainment. Supports MPEG audio and Dolby Digital. Supports both MPEG 2 and MPEG 4 video formats. Supports DVB-S and DVB-S2 standards. Comes with LNB-IN and LNB-OUT ports to make it easier to connect from one decoder to another without additional equipment (the connector is Single F-Type antenna input, Input impedance 75 ohm.) Comes with RF-IN – for connecting outside aerial/antenna (the connector is IEC female antenna input). Comes with RF-OUT – for distribution to multiple rooms, the next decoder models will have the TV link function (the connector is a single IEC male and supports CH 21 – 69 remodulated output). Comes with RCA connections: Comes with HDMI connection: for a much clearer picture. Screen resolutions resolutions:576i/ 576p/720p/1080i/1080p. Embedded NDS HBSS cardless security with Smart card for future use. External 12V Power Supply Unit with low power consumption. CRYSTAL CLEAR PICTURE QUALITY INCLUDES HD CHANNELS COMPATIBLE WITH EXISTING SIDHES