MODULAR HEAVY DUTY CANTILEVER SHELVING for either “Bulk End” or Shelves for either “Bulk End” or Shelves for either “Bulk End” or Shelves Your graphic signage here Either with Punched Panel Infill or with Wire Mesh Infill SYDNEY BRISBANE MELBOURNE 205-231 Fairfield Road Unit 20b 10-20 Depot Street Suite 3, 203-205 Blackburn Road Yennora NSW 2161 Banyo QLD 4014 Mount Waverley VIC 3149 Ph: (02) 8724 4600 Fax: (02) 8724 4699 Ph: (07) 3266 9502 Fax: (07) 3266 4269 Ph: (03) 9847 6822 Fax: (03) 9847 8868 Email: [email protected]Email: [email protected]Email: [email protected]Website: www.gibsonshopfitters.com.au OUTRIGGER GONDOLAS & VARIOUS END OPTIONS - Supermarket & Convenience Stores - Manufactured to Order CLIP ON “FOLDING” FEATURE END FRAME DENSE END CLIP ON FEATURE END FRAME with Mesh Infill Standard Heights: 2100mm, 2280mm & 2480mm O/A Module Length: 915mm - Double or Single Sided Infill Panel Options: Punched Panel or Wire Mesh Panel Buffer Rails: Optional Finishes: Powder coat and Chrome Manufactured to Order: Small run orders can be locally manufactured and larger orders are imported from our overseas factory. OUTRIGGER GONDOLA SPECIFICATIONS CLIP ON FEATURE END FRAME with Punched Panel ADDITIONAL INFORMATION : Footprints see Page 2 - Non Outrigger Units see Page 3 - Accessories see Page 5
6
Embed
OUTRIGGER GONDOLAS & VARIOUS END OPTIONS - Supermarket ... · OUTRIGGER GONDOLA SPECIFICATIONS CLIP ON OUTRIGGER GONDOLAS & VARIOUS END OPTIONS - Supermarket & Convenience Stores
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
FOOTPRINTS for OUTRIGGER GONDOLAS - Supermarket & Convenience Stores - Manufactured to Order
SUITS 470mm WIRE SHELF R/N (REAR NOTCHED)
This “Fixture Guide” shows the “Footprint” for Double Sided Gondolas. You will also see the “Footprint” for a Single Sided unit as the second measurement up from the bottom.
SUITS 400mm WIRE SHELF or 430mm WIRE SHELF R/N
(REAR NOTCHED)
SUITS 470mm WIRE SHELF or 500mm WIRE SHELF R/N
(REAR NOTCHED)
21
00
, 2
28
0 o
r 2
480
mm
O/A
SPECIAL NOTES: Not all the shelf depths shown in the footprints above are our standard stock
shelf sizes. Only the 470mm & 400mm are. Rear notched and other shelf sizes can be manufactured to order and will be priced on run quantity, they will also require an imported lead-time.
NOTE: Rear notched shelves can only be used with wire mesh infill panels and not punched panels.
Rear notched shelves are not stocked and manufactured to order.
FOOTPRINTS for NON-OUTRIGGER GONDOLAS - Supermarket & Convenience Stores - Manufactured to Order
This “Fixture Guide” shows the “Footprint” for Double Sided Gondolas. You will also see the “Footprint” for a Single Sided unit as the second measurement up from the bottom.
PLEASE NOTE: (Buffer Rails) If “Buffer Rails” were required more often than not we would extend the front leg out 70mm per each side.
SPECIAL NOTES: The shelf depths shown in the footprints
above refer to our standard stock shelf sizes. Other sizes can be manufactured to order and will be priced on run quantity, they will also require an additional lead-time.
14
45
or
20
20
mm
O/A
SUITS 470mm STEEL OR WIRE SHELF SUITS 405mm STEEL OR 400mm WIRE SHELF