This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
OutdoorOutdoor Accessories
Family FileName Description RevisionDate
Options and AccessoriesOutdoor Options and AccessoriesHRB-HRBW Remote Ballast Housing 03/07/2005
Outdoor Options and AccessoriesOA-AL Mounting (Area) 04/01/2002
Outdoor Options and AccessoriesOA-Elec Electrical, Architectural Colors 04/01/2002
Outdoor Options and AccessoriesOA-FL1 Mounting (Floodlighting) 04/15/2002
Outdoor Options and AccessoriesOA-FL2 Mounting (Floodlighting) 06/01/2002
FEATURES & SPECIFICATIONSINTENDED USEHRB — Designed for use indoors where quiet performance is required orthe ballast must be mounted remotely from the luminaire.HRBW — Designed for remote pole or ground mounting outdoor applications.CONSTRUCTIONHRB — Ballast is encapsulated in a steel can utilizing Class H (1800) heatdissipating, polyester compound. Ballasts carry a Class A sound rating upthrough 175W, Class B for 250W and 400W, and Class C for 1000W. Capacitorand ignitor (when required) are mounted separately within the unit. Stan-dard finish is white.HRBW — Ballast is securely mounted to an aluminum, heat-sink base. Analuminum cover is placed over ballast assembly and bolted, compressingthe weather-tight gasket around the base. An integral 1" threaded nipplewith locknut allows for connection with conduit or the mounting bracket.Standard finish is black.ELECTRICAL SYSTEMConstant wattage autotransformer. Ballasts are precision wound and 100%factory tested. Units that require an ignitor are shipped standard with long-range ignitors. Max lamp-to-ballast distance is 50ft. (1000-watt ballasts 75ft.).Standard metal halide system lamp-to-ballast distance is a function of thewire guage (see LLWeb).INSTALLATIONHRB — Ballasts must be mounted 12" apart. 3/8" slots on backplate allow formounting to service panel or wall (see figure below). Three double 7/8" and1-1/8" knockouts on top of can and two double 7/8" and 1-1/8" knockouts oneach side of the can for wiring access.HRBW — An integral 1" threaded nipple with locknut allows for the connec-tion with conduit or the mounting bracket. Two 2-1/2" keyhole slots allow forpole or wall mounting.LISTINGSUL listed (standard). CSA certified.
ORDERING INFORMATIONChoose the boldface catalog nomenclature that best suits your needs and write it on theappropriate line. Order accessories as separate catalog numbers (shipped separately).
Example: HRB 400M TB
Series
HRBHRBW
Voltage
480TB2
Wattage/lamp
175M250M400M1000M1500M1
250S400S1000S
Outdoor Sheet #: HRB-HRBW OA- 135
Catalog Number
Notes Type
Wattage A B C D E F G Weight175M,250M 11-3/8" 12" 12-3/4" 13-3/4" 3-5/16" 6-9/16" 4-3/4" 22, 24 lbs.400M,1000M 12-1/16" 12-11/16" 13-7/16" 14-7/16" 3-5/16" 7-11/16" 5-3/4" 32, 42250S,400S 34, 38 lbs.1000S 17-3/8" 18" 18-3/4" 19-3/4" 3-5/16" 7-11/16" 5-3/4" 60 lbs.
HRB Mounting Detail
G
FTop view3 double
7/8" and 1 1/8"knockouts3/8" Oval Slots
E
A B C D
INDOOR ENCLOSED DIMENSIONS
HRB
HRBW Mounting Detail
Notes:1 Available in HRBW Series only.2 Multi-tap ballast (120V, 208V, 240V, 277V)
HRBW Mounting Bracket(ships standard w/HRBW Outdoor Ballast)
MA Master Arm for single/twin 180o configuration, ■internal fitter (Size 3 only).
MB Mounting Bracket. Use Size 1 housing with KSF, KSE. ❑ ❑
PC Polycarbonate lens. ❑ ❑
PT4 Post-top round pole only (4" OD open-top pole). ■ ■
PT45 Post-top round pole only (4-1/2" OD open-top pole). ■ ■
PT5 Post-top. Must use with round pole only for KVR2. ■ ■(5" OD open-top pole)
PT6 Post-top. Must use with round pole only for KVR2. ■ ■(6" OD open-top pole)
RP__ Round Pole Mounting Arm. Use 9" arm for two at 90o. ■ ■ ■ ■ ■
RPD__ Round Pole Mounting Arm. Use 9" arm for two at 90o. ■ ■ ■
RPF Round Pole Fitter. ■ ■
RPF20 Round Pole Fitter (2 3/8" O.D. tenon). ❑ ❑
RPF25 Round Pole Fitter (2 7/8" O.D. tenon). ❑ ❑
RPV__ Round Pole Mounting Arm. Use 12" or 14" arm for ■two at 90o. Use 14" arm for two 1000W fixtures at 90o
BV KSE KSF KAD KAC KT KVE KVR KVS KAR KKS KKR KQS KQR Aeris KVF
For arm and/or bracket lengths, see product specification sheet or specific product page in this catalog. See notes on page 351.
DAD12P/WB
HS – KSF
HS – KAD
Options and Accessories
Area Lighting❑ = Available as an accessory, shipped separately■ = Available as an option, shipped installed
❖ = Available as both
KTMBMBKMA DA12P/WB
14"6"
Tenon Slipfittersfor Arm-Mounted LuminairesUse with KSF, KVS, KAR, KSE Series. When ordered, fixture must include round polearm (RP or RPD suffix) or pole degree aiming arm (DA12P or DAD12P). To order, locatecatalog number from chart below based on tenon size and mounting configuration.Example: For 3 fixtures at 120°, using a 2-7/8" tenon, catalog number is T 25-320.Shipped separately. Order as separate catalog numbers.Tenon 1 fixture 2 fixtures 2 fixtures 3 fixtures 3 fixtures 4 fixturesO.D. 180° at 90° at 120° at 190° at 90°
2-3/8" T 20-190 T 20-280 T 20-290* T 20-320* T 20-390* T 20-490*
2-7/8" T 25-190 T 25-280 T 25-290* T 25-320* T 25-390* T 25-490*
4" T 35-190 T 35-280 T 35-290* T 35-320 T 35-390* T 35-490*
* RPO9 must be used with KSF, KVS, KT or KSE.
7-3/4"
Tenon Slipfitterfor KK Series
SlipfitterRP09
Tenon
Set
Sheet#: OA-AL OA - 105
RPVD__ Round Pole Mounting Arm. Use 6" arm for two at ■ 90o. Use 9" arm or larger for two 1000W at 90o.
SM Side Mount assembly. One per luminaire. ❑ ❑
SP__ Square Pole Mounting Arm. Use 9" arm for two at 90o. ■ ■ ■2 ■ ■
SPD__ Square Pole Mounting Arm. Use 9" arm for two at 90o. ■ ■ ■
SPF Square Pole Fitter. ■ ■
SPF20 Square Pole Fitter (2 3/8" O.D. tenon). ❑
SPF25 Square Pole Fitter (2 7/8" O.D. tenon). ❑
SPV__ Square Pole Mounting Arm. Use 12" or 14" arm for ■two at 90o. Use 14" arm for two 1000W at 90o.
SPVD__ Square Pole Mounting Arm. Use 6" arm for two at 90o. ■Use 9" arm or larger for two 1000W fixtures at 90o.
3 Only available with FP option.4 Only available in KVS1 (R2, R3 and R4).5 Size one housing only.6 KAR size 1 & 2 only.7 Specify family as prefix when ordering as a
separate line item.
❑ = Available as an accessory, shipped separately■ = Available as an option, shipped installed
16"(40.6cm)7"
(17.8cm)
SM/WM
14"(35.6cm)
BV KSE KSF KAD KAC KT KVE KVR KVS KAR KKS KKR KQS KQR Aeris KVF
C22 12-3 SEO cord (2' prewired)*C42 14-3 SEO cord (2' prewired)*C62 16-3 SEO cord (2' prewired)*
CV3P 3 ft. of 16-3 SEO cord pre-wired w/3 prongplug for use with prewired cages andcross-arms. Must use matching recep-tacle, provided by others. Not available with1500W-120V.
DF Double Fuse. Use with 208, 240, 480V. Notavailable for Multi-tap Ballast. In-line, time-delay type fusing isolates faulty luminairefrom circuit fusing.
last.PE Photoelectric Cell. (Button-type) Not avail-
able for multi-tap ballast or 480V.PE1 NEMA Twist-Lock Photocontrol. 120, 208,
240V. Shipped separately.PE3 NEMA Twist-Lock Photocontrol. 347V.
Shipped separately.PE4 NEMA Twist-Lock Photocontrol. 480V.
Shipped separately.PE7 NEMA Twist-Lock Photocontrol. 277V.
Shipped separately.PER NEMA Twist-Lock Photocontrol. Recep-
tacle. Can be rotated 90o for positioning.Photocontrol not included. Shipped in-stalled.
* Other cord lengths available. Consult factory.
❑ = Available as an accessory, shipped separately■ = Available as an option, shipped installed
NOTES:
1 KFL3 only2 KAR2 only3 KSE2 only4 KSF2/3 only
5 KVR/KVE/KVS size 3 only6 70M, 150M and 70S not available with 480V or DF7 Not available in TA distribution
QRS Quartz Restrike System. Activates when powerinterruption causes HID lamps to drop out.Deactivates when fixture restrikes. QRS doesnot energize during cold start of fixture. Watt-age of quartz lamp should not exceed that ofHID source. For 100W and below, use 100WDC bayonet-base lamp.
QRSTD Quartz Restrike Time Delay. Functions asdoes QRS, but quartz lamp energizes underhot and cold starting conditions. Quartzlamp will come on when luminaire is ener-gized and remain on for two minutes afterrestrike.
SC Shorting Cap for PER. Ships as SC U.SF Single Fuse. Use with 120, 277, 347V. Not avail-
able for Mult-tap Ballast. In-line, time-delaytype fusing isolates faulty luminaire fromcircuit fusing.
WL Wet Location. Gasketed use with KP only.
C22 C42 C62 CV3P DF EC FD FG KW1 KW4 LS MR1 MR3 MR4 MR6 PE PE1 PE3 PE4 PE7 PER QRS QRSTD SC SF WL
C22 C42 C62 CV3P DF EC FD FG KW1 KW4 LS MR1 MR3 MR4 MR6 PE PE1 PE3 PE4 PE7 PER QRS QRSTD SC SF WL
Sheet#: OA-Elec. OA - 100
KBA ■ ■ ■ ■
KBC ■ ■ ■ ■
KBD ■ ■ ■ ■
KBE ■ ■ ■ ■
KBR ■ ■ ■ ■
KBS ■ ■ ■ ■
KL ■ ■ ■ 7 ■ ■
VV ■ 6 ■
TWH ■ ■ ■ ■ ❑ ❑ ❑ ❑ ■ ■ ❑ ■
TWP ■ ■ ■ ■ ■
TWA ■ ■ ■ ■ ■
TWAC ■ ■ ■ ■ ■
TWL ■ ■ ■
WFL ■ ■ 8 ■ ■ 9 ■
WG/WPRK1 PEB1 (Photoelectric Control Kit 120V); RK1 PEB2 (Photoelectric Control Kit 277V); RKI1 PEB3 CSA (Photoelectric Control Kit 347V) are available on TWP, TWH,TWA and TWL. Ship separately.
C22 C42 C62 CV3P DF EC FD FG KW1 KW4 LS MR1 MR3 MR4 MR6 PE PE1 PE3 PE4 PE7 PER QRS QRSTD SC SF WL
PGR ■ ■ ■ ■ ■ ■
KPS ■ ■ ■ ■ ■ ■ ■
KACM ■ ■ ■ ■
C22 C42 C62 CV3P DF EC FD FG KW1 KW4 LS MR1 MR3 MR4 MR6 PE PE1 PE3 PE4 PE7 PER QRS QRSTD SC SF WL
For electrical system compability (LLRPSL, SCWA, CWA, CWI, XHP, RHP, RNP) please see indvidual product specification sheet or specific page in this catalog.
SF DF QRS PER FG(KB)
Architectural Colors
Powder finish. Add designation as suffix tocatalog number, KL series available inDDB, DNA, DBL and DWH only. Additionalarchitectural colors are available. Seecolors brochure on www.lithonia.com.
Fixture FinishesADB Anodized dark bronze. Architectural Class
1. Round housing only for KAR2, KKR, KQRand certain 8" KB bollards. Add as suffix tocatalog number.
CR Corrosion-resistant finish. Clear polyestercoating for additional protection againstsome corrosive atmospheres. Consult fac-tory for corrosive compatibility. Not avail-able on KL.
NB Natural black finish. For SS option only.
Standard ColorsDDB Dark bronze (standard)DBL Black
Floodlighting❑ = Available as an accessory, shipped separately■ = Available as an option, shipped installed
NOTES:
1 Vandal Guards are compatible with all wattages.2 Specify family as prefix when ordering as a separate line item.3 Order as separate catalog number.4 When used with TFM yoke a 3/8" bolt, 2 lockwashers & nuts
KFLSTMTHK Stanchion Mount for THK option. (Use with THK mounting only or standard TFM). ❑ ❑
KFLTBS Triangular Base. ❑
TFTS Tenon Slipfitter. For yoke-mount floodlight. Fits 2" to 2-1/2" (2-7/8" OD) when used with TFA,❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑TFG, TFD. Fits 1-1/2" to 2-1/2" (2-3/8" OD) when used with TFL, TFR, KFL, 55, 95 or 170s (YK only)
THK Threaded Knukle Mount. ■
TM
Tenon Base Mount. Use with TS, IS or Swivel options.❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑Must use slipfitter 2-3/8 to 2-7/8" OD
Order as TWLEP2.FS Full Shield for cut-off distribution ■ ■
HS House-side shield ■
PC Polycarbonate lens. Standard on KL. ■ ■ ■ ■ ■ ■ ■ ■
R6S/R8S Half-Shield. Not for use with louvered bollards. ❑ ❑ ❑ ❑
S6S/S8S Half-Shield. Not for use with louvered bollards. ❑ ❑
SCL Scribed Lens. Not available with louvered bollards. ■ ■ ■ ■ ■ ■
TS2 2-3/8" (6.0) tenon. ■
TS3 3" (7.6) tenon. ■
TS35 3-1/2" (8.9) tenon. ■
TS4 4" (10.1) tenon. ■
TWAWG Wireguard. ❑ ❑3
TWHVG2 Vandal Guard. Ships as TWHVG U1 and TWHVG J41. ❑
TWHWG2 Wireguard. Ships as TWHWG U1. ■
TWLMB Mounting Box, cast aluminum. ❑
TWLWG Wireguard. Ships as TWLWG U1. ❑4
TWPWG Wireguard. Use with TWP. Ships as TWPWG U1. ❑
BBPBBF
BBS
BBW
TWLMBEP1
TWHWG
TWLWG
TWPWGTWHVG
TWAWG
KBA KBC KBD KBE KBR KBS KL VV TWH TWP TWA TWL WG/WP WFL
NOTES:
1 Constructed of hot-dipped galvanized steel wire.2 Housing modification required.3 For use with TWL, HPF unit with backbox.4 For TWL HPF unit only. For TWL HPF unit use TWAWG.
Options and Accessories
Site Lighting and Building-Mounted Lighting❑ = Available as an accessory, shipped separately
■ = Available as an option, shipped installed
Sheet#: OA-SL-BM-GC-SP OA - 110
Garage Lighting and Sportslighting
RMG Reces sed Mount in grid ceiling ■
SS Stainless Steel Ceiling Mount. Housing constructed of alloy 304 stainless steel with 28 longitudinal finish. ■
Finish options include NB- Natural Brushed or CR-Corrosion-Resistant clear polyester powder. AH Above horizontal aiming ■
CF Charcoal Filter. Must use with heavy duty or heavy duty shroud. ■ ■
CH Die Cast Housing. ■
CRA Cross-Arm Adaptor for horizontal mounting. Order as separate catalog number. Ships as CRA U & CRAJ4. ❑ ❑
CRA45 Cross-Arm Adaptor for horizontal mounting 45o. Order as separate catalog number.❑
Ships as CRA45 U, CRA45 J4 and CRA45 J12. Standard on TSP. SLR Stainless Steel Lens Rings. ■ ■
IBL Internal Bottom Louver. Can not order IBL and TVUV together. ■
TVPMB Pole Mounting Bracket. Use on round pole. Ships as TVPMB U. ❑ ❑
TVPWB Wood Pole or Wall Mounting Bracket. ❑ ❑
TVRAB Right Angle Mounting Bracket. Ships as TVRAB U. Standard finish is DDB. ❑ ❑
TVSAB Steel Angle Mounting Bracket. Standard finish is dark bronze (must specify color). Ships as TVSAB U. ❑ ❑
TVTS Tenon Slipfitter. Fits 2" to 2-1/2" pipe. Ships as TVTS U, J4 and J12. ❑ ❑
TVUV Upper Visor. ❑
TVX2 2-Light Wood Pole Cross-Arm. Order as separate catalog number. ❑ ❑
TVX3 3-Light Wood Pole Cross-Arm. Order as separate catalog number. ❑ ❑
TVX4 4-Light Wood Pole Cross-Arm. Order as separate catalog number. ❑ ❑
TVWC Wood Cross-Arm Mounting Bolt 5/8" - 11 UNC. 8" length. Ships as TVWC U and TVWC J4. ❑ ❑
YK Yoke Mount. ❑ ❑
PGR KPS KACM TSP TV THT
66"(167.6cm)
TFX3
EPA 3.9 sq. ft.Weight 51 lbs.
96"(243.8cm)
TFX4/TVX4
EPA 4.8 sq. ft.Weight 64 lbs.
66"(167.6cm)
EPA 3.9 sq. ft.Weight 56 lbs.
TVX3
EPA 1.4 sq. ft.Weight 20 lbs.
36"(91.4cm)
TFX2/TVX2
9/16" (1.4cm) O.D. holes (4)
8"(20.3cm)
TFRAB 8-1/2"(21.6cm)
TVRAB 14" (35.6cm
3/8" (1cm) H.R. steel
6 - 3 / 4 "( 1 7 . 1 c m )
7"(17.8cm)
2 - 1 3 / 1 6 "( 7 . 1 c m )
5-5/8"(14.3cm)
TFRAB/TVRAB
11/16" clearance holefor 5/8" bolt
Bolt holes formounting TV
4-3/4"(12.1cm)
10-1/2"(26.7cm)
7/16" clearancehole for 3/8" bolt
3/8" x 1-1/2" Hex bolt,flat washer andlockwasher furnished(tapped for 3/8 -16 UNC)
TVPWB 5"(12.7cm)
3-3/8"(8.6cm)5-3/8"
(13.7cm)
RMG SS
Options and Accessories
Pivot slot for1/2" bolt
Degree markingsPivot hole for 5/8"bolt (not provided)
5/8" x 1" Hex bolt andlockwasher furnished
4"(10.2cm)
1-1/4"(3.2cm)
4-1/2"(11.4cm)
Floodlight yoke
CRA
Fixture yoke
CRA45
Degree markings
Pivot hole for 5/8" bolt(not provided)
Pivot slot for 1/2" bolt(not provided)
5/8" x 1" Hex bolt andlockwasher furnished
6"(15.2cm)
4-1/2"(11.4cm)
1-1/4"(3.2cm)
WireAccess
5/8" Clearance HoleTVTS Furnished withweather-tightcord grip for 14-3 SO cord. (Gripfor 12-3 SOoptional).4-7/8"