Everything you need in one box to fit an autopilot to your outboard motor, the Outboard Pilot lets you focus on fishing acvity while keeping the boat on course. Choose either the hydraulic- or cable-steer pack. When connected to a Lowrance HDS Gen2 or Gen2 Touch, the Outboard Pilot can steer to a waypoint or along a route, select a turn paern or simply hold a constant heading. The Lowrance SmartSteer™ user interface allows you to easily switch between electric-steer, trolling-motor control and outboard motor control directly from your HDS display. And, with your HDS display, you can easily convert trails to routes – so you can retrace a previous track and get your boat back to the dock from your fishing area. Our all-new autopilot pack—featuring Lowrance SmartSteer™ control from your HDS Gen2 or HDS Gen2 Touch—will steer to a heading, waypoint or route Outboard Pilot ◆ Steer your outboard motor to a heading, waypoint, route or cursor, with control from your HDS Gen2 or Gen2 Touch display. ◆ New Lowrance SmartSteer™ interface provides control of either your cable-steer or hydraulic outboard motor, as well as the MotorGuide Xi5 Pinpoint electric-steer trolling motor. ◆ “One-touch” route creaon from trails. ◆ Pre-set turn paerns for more effecve fishing/trolling presentaons. ◆ Recommended for single-outboard setups, on boats that are 30 feet and less, in length. ◆ VRF (Virtual Rudder Feedback)—simplifies pilot installaon— eliminang the need for a rudder posion sensor. ◆ Easy setup—straighorward guide steps you through first-me install. ◆ Easy-to-install, plug-and-socket connecon— with no complex terminal wiring. ◆ Supported by Lowrance Advantage Service program