8/7/2019 osvirtualization-100303062930-phpapp01
1/25
Mary Joy Veras SYSAD323
3 IT-b
INSTALLING UBUNTU:
STEPS:1. First, you have to Open your virtual box and click on NEW to create a
new virtual machine.
2. Then, select the amount of base memory. The recommended memory size is384 MB but I choose 256 MB to enable the use of my laptop, because of its
limited memory, thus, more memory allocation is preferred for the productiveuse of the guest operating system.
8/7/2019 osvirtualization-100303062930-phpapp01
2/25
Then, create new Virtual Hard Disk
Be sure to have your iso file obtain at the laboratory.
Then click Next
3. Select the type of virtual hard disk. I choose dynamically expanding storage sothat it will grow up to the size specified as the guest OS claims disk space.
Then, click NEXT
8/7/2019 osvirtualization-100303062930-phpapp01
3/25
4. Then on the next step you will select the location and size of the virtual Disk.The default size is 8.00 GB.
Then click NEXT
8/7/2019 osvirtualization-100303062930-phpapp01
4/25
5. A new hard disk will be created after you press the FINISH button.
6. Select your virtual machine and click the settings button, select storage and
select the virtual cd Drive that you will use and browse the ubuntu iso file.
8/7/2019 osvirtualization-100303062930-phpapp01
5/25
7. On the setting, select System then then change the size of the base memory
to proceed to next step.
8. Lastly this is the output. Then select the virtual machine you make and clickstart to run.
8/7/2019 osvirtualization-100303062930-phpapp01
6/25
9. The Virtual Machine starts, Then you have to install the ubuntu by following
the instruction.
10. This is the Ubuntu Installer main menu. Click YES to determine yourkeyboard layout.
8/7/2019 osvirtualization-100303062930-phpapp01
7/25
11.Click Continue for the keyboard layout detection complete.
12. The virtual machine will scan the Cd Rom
8/7/2019 osvirtualization-100303062930-phpapp01
8/25
13. It will load the additional components.
14. Click continue to configure the network
8/7/2019 osvirtualization-100303062930-phpapp01
9/25
15. Enter hostname then continue.
16. Partition the disks. Click the Guided with set up LVM then enter.
8/7/2019 osvirtualization-100303062930-phpapp01
10/25
17. Just select the highlighted word
19. Select YES
8/7/2019 osvirtualization-100303062930-phpapp01
11/25
20.SELECT Continue the system
21. Write the changes to disk , Click YES!
8/7/2019 osvirtualization-100303062930-phpapp01
12/25
22. Select CONTINUE
23. Assign the user and the password
8/7/2019 osvirtualization-100303062930-phpapp01
13/25
24. Verify the password
25. Encrypt your directory, Click YES!
8/7/2019 osvirtualization-100303062930-phpapp01
14/25
26. You can now log in to your Ubuntu Using the user name and password
you set.
27. Now you will :
apt-get update
apt-get upgrade
apt-get install samba smbfs smbclient
apt-get install g++ gcc cpp
apt-get install libgcc libgcc1-dbg libstdc++6-4.3-dev libgmp3-dev
apt-get install imlib11 automake make giblib1 perl
apt- get install libxxf86gba-dev xserver-xorg-dev x-windows-systemxdm xserver-xorg-core
then restart your virtual box
8/7/2019 osvirtualization-100303062930-phpapp01
15/25
28. Then Install the libfontconfig1
8/7/2019 osvirtualization-100303062930-phpapp01
16/25
29. Installation of libcg-dev
30. Installation of libbt-dev
8/7/2019 osvirtualization-100303062930-phpapp01
17/25
31. Installation of libc6
32. Installation of libbt-dev
8/7/2019 osvirtualization-100303062930-phpapp01
18/25
33. Installation of libbt
34. Installation of libfontconfig1-dbg
8/7/2019 osvirtualization-100303062930-phpapp01
19/25
35. Installation of libfontconfig1-dev
36. Installation of blacbox, xterm and xinit:
apt-get install blackbox
apt-get install xterm menuapt-get install xinit
8/7/2019 osvirtualization-100303062930-phpapp01
20/25
37. Output of installing blackbox
38. The output of xterm
8/7/2019 osvirtualization-100303062930-phpapp01
21/25
39. The output of installing menu
40. the xterm terminal
8/7/2019 osvirtualization-100303062930-phpapp01
22/25
INSTALLING WEB BROWSER USING DPKG
1. download a deb file of your desire web browser. Then Create a directory
which is extr and mountpoint. You have to mount the file using:mount/dev/sdb1 /home/joy/mountpoint.
2. Then go to the directory where you mount it: cd mountpoint.
8/7/2019 osvirtualization-100303062930-phpapp01
23/25
3. Then cp the file to extr: cp iceweasel_1.5.0.8pre2.deb /home/joy/extr
Then go to the directory extr to check the file.
4. Then type: dpkg iiceweasel_1.5.0.8pre2.deb then wait for the process to
finish. If theres any dependencies like Ive encountered. Just install it.
8/7/2019 osvirtualization-100303062930-phpapp01
24/25
5. Output: THE ICEWEASEL
INSTALLATION OF FILE MANAGER: THE BSCommander(double panel)
1. In installing file manager, I acquired a .tar.gz file from the net. I extractedthe content using tar-xvzf bsc_2.27_x86.tar.gz. Then cd to the extracted
directory and type ./configure, make and make install.
8/7/2019 osvirtualization-100303062930-phpapp01
25/25
2. after the installation, You can now view your file manager on the xterm menu
3. The output: BSCommander