Orthodontic Pliers Orthodontic Instruments Distal end cutter, ligature cutter, hard wire cutter, bird beak plier, tweed plier, weingart plier, arch forming plier, T-plier, three prong

MEDICAL DESIGN®( Worldwide Dental Health care Supporting Company )

• Medical Design is in the business of manufacturing and exporting Dental Implants Instruments, Orthodontic Instruments. E. G Orthodontic Pliers, Orthodontic instruments, Distal end cutter, ligature cutter, hard wire cutter, bird beak plier, tweed plier, weingart plier, arch forming plier, T-plier, three prong plier, bracket removing plier, step plier etc .

• Medical Design is a well reputed name, committed to this profession and can be relied upon for its very fair dealings, the workmanship and the skill it has and at the top the speedy and in time service it renders. We assure you that you shall never regret having business relation with Medical Design.

• Official site Medical Design (Pakistan). Here you can order the whole range of products and services or to find contact information. http://www.medicaldesignpk.com

MEDICAL DESIGN Address : Amir Street, Ali Ul Haq Road, Call / Whats app : 0092 345 6768889 Model Town Sialkot 51310 Pakistan Email : [email protected]

T3-Jaw Plier

• Precision tips for accurate wire and clasp adjusting and contouring • Also excellent for bending of orthopedic appliances• Box joint

Bird Beak Plier

• Versatile plier for orthodontic heavy wire bending• Round and pyramid beaks are smooth to prevent wire scoring• Can also be used to form springs• Tip sizes are .035” round and square

Arch Forming Plier (Angle)

• For bending, holding or torquing dimensional wires• Stainless steel with hard carbide coated tip surfaces• Box joint• Offering maximum resistance against wear by torquing.

Cap Removal Plier

• This precision stainless steel instrument uses joint plier transfer to shear off convertiblecaps effortlessly, and with one fluid motion• The slender rail design allows doctors to easily access the buccal region with little obstruction• The blade tips feature a filleted design allowing for an easy, low-force cap removal• Can be used on any convertible buccal tubes as well as convertible brackets• Each packaged instrument will include two replacement blades

Cinch Back Plier

• This plier is made with the optimum angle for working behind the buccal tube• Serrated tips are tapered to a fine point allowingaccess to hard-to-reach areas

Closing Loop Plier

Nance:• Extra hard stainless steel• Four step loop forming beaks precision milled• Radiused edges prevent wire damage• Box joint• Up to .028” (0.711mm) wire

Standard:• Same use and same characteristics as the Nance, but permitsuniform vertical bendings• Permits the simultaneous forming of two right angled bends• Box joint• Max wire .028” (0.711mm)

Contouring Plier

• For bands and anterior stainless steel crowns• Stainless steel• Box joint

Contouring Plier (Johnson)

• Concave and convex tips for contouring bands• Stainless steel

Crimpable Hook Plier

• For attaching crimpable hooks securely to arch wires with minimum

Direct Bond Remover – Angled

• Quickly and safely removes direct bond brackets.• Angled precision edges allow for easy removal of brackets and excess bonding.

Direct Bond Remover Straight

• Wedges between the base and the tooth surface and lifts off with virtually no stress• Precision diamond honed wedges work on all types of brackets

Direct Bond Removing Plier

• Wedges between both edges of the base and the tooth surface and lifts off with virtually no stress• Grips firmly for occlusal-gingival or mesial-distal use• Hard tool steel insert• Available in a narrow & wide tip

Distal End Cutter Safety Hold

Distal End Cutter, Safety Hold• Shear cuts hardwire and then safety holds the loose distal end toprevent wire from going into tissue• Hard tool steel insert• Cut wire up to .021 x .025 (0.534mm x 0.635mm) and .026 (.66mm) round • Designed for intraoral cutting and lip safety• Made from selected surgical stainless steel to provide lasting beautyand durability• Not recommended for braided wire

Flush Distal End Cutter with O-Ring

Flush Distal End Cutter with O-Ring • Hardened insert • Elastomeric o-ring• Wire up to .022” x .028” (0.559mm x 0.711mm) and up to .026” (0.660mm) round • Due to the o-ring, the cutting edges do not have direct contact which ensures longer sharpness of the cutting edges

Distal End Cutter Flush V Design

• Assures arch wire is cut flush with the end of a tube • Safety hold is ideal for intraoral cutting and lip safety • Cuts Elgiloy, S.S. and Niti .016” (0.406mm) to .018” x .022” (0.457mm x 0.559mm)• Braided Wire .0175” (0.445mm)• Box Joint

Distal End Cutter Flush

• Assures arch wire is cut flush with the end of a tube • Safety hold is ideal for intraoral cutting and lip safety • Cuts Elgiloy, S.S. and Niti .014” (0.356mm) to .018” x .022” (0.457mm x 0.559mm)• Braided Wire .0175” (0.445mm)• Box Joint

Distal End Cutter (with Long Handle)

• Cuts and holds arch wire within .5mm of the buccal tube• Long handle design allows better control behind second molars, also results in lessforce to cut

Hard Wire Cutter

• 15° cutting angle for easy intraoral access• The extra strong edges make it one of the most popular cutters• Designed to cut all arch wires• Capability of cutting ligatures at the tip

Hard Wire Cutter 2

Hard Wire Cutter 2• Designed to cut all arch wires• Capability of cutting ligatures at the tip

Heavy Wire Cutter

• Hard tool steel insert• Cutting capacity up to .040” (1.016mm) in the rear area, .024” (0.610mm) in front• Hard tool steel inserts

How Plier Straight

• 2.5mm tips• Matching serrated pads assure a firm, positive grip• Rounded tips for patient comfort and safety

How Plier Curved

• Same as Straight Plier only with curved beaks• Curved beaks increase efficiency in posterior area• Box joint

How Plier Straight

• Extra hard stainless steel• Good all around utility plier has long slender lip-safe beaks• Tips are serrated and hard carbide coated for additional grip• Lip-safe edges at box and beaks• Tips are precisely adjusted• Box joint

Ligature and Hard Wire Cutter

• Stainless steel• Pliers are designed for cutting wires with minimum force• Cuts to maximum of .022” x .028” (0.559mm x 0.711mm)• Hard tool steel inserts

Ligature Cutter

• Stainless steel• Soft ligature wire only – up to .020” (0.508mm)• All edges of lock are lip safe for intraoral use• Fine tips for easy intraoral access• Pliers will cut wires up to the very tip• Hard tool steel inserts diamond honed

Ligature Tying Plier

Ligature Tying Plier (Coon)• Semi-automatic• Locking channel is chamfered and burr-free to allow wire to slide before locking without being cut• Tips are thin allowing close contact to bracket• Up to .012” (0.305mm) soft wire

Light Wire Plier

• Longer, more gradually tapered beaks than the Bird Beak plier• For working light round wires up to .020” (0.508mm)• Longer beaks make it easier to bend small diameter loops• Box joint

Light Wire Plier Extra Long

• Extra long, narrow beaks for precise bends• Designed for working with small wires and forming wire springs• Tapered beaks make it easy to bend small diameter loops• Tip sizes are .030” round and square

Lingual Arch Forming Plier

• Designed to form double back and triple back bends in either .030” (0.762mm) or .036” (0.914mm) wire for inserting in lingual sheaths• Double back groove is close to the plier joint to assure adequate forming• Also recommended for use with 3D Fixed/Removable to hold palatal activation appliances

Lingual Arch Forming Plier

• Plier makes consistent and repeatable bends• Forms double-back and triple-back bends in .030” and .036” wire for use withlingual sheaths• Jaws of the plier have four grooves placed and sized for all different sized larger wires

Loop Forming and Closing Plier

Nance Style• Precision loop forming with four-step tip(3, 4, 5, and 6mm)• Serrated tips prevent wire slippage

Loop Forming Plier

Optical Type• Extra hard stainless steel• Cone and concave beaks for round wires• Concave beak is contoured to ensure more uniform loops• Round beak is precision ground to .047” at tip• For working round wires at tip up to .020” (0.508mm)

Loop Plier Tweed

• Extra hard stainless steel• Tips precision milled• Three step loop former .049” (1.25mm), .065” (1.65mm), .085” (2.15mm)• Grooved and serrated opposing tip for very small loops• Up to .020″ (0.508mm) wire• Non-removable tip

Loop Plier Tweed Extra Replacement Tip

• Includes one extra replacement tip• Hard tool steel inserts• Round beak is heat-treated. It has two sections of .047” (1.2mm), .059” (1.5mm)• Concave beak prevents wire nicking and ensures more uniform loops; for making Omega loops• Up to .020” (0.508mm) wire

Mini Pin and Ligature Cutter

Mini Pin and Ligature Cutter• Fine tips to easily access hard-to-reach areas• Cuts wire ligatures, pins, and elastics

Miniature Cutter

• Stainless steel• Soft ligature wire only – up to .012” (0.305mm)• Hard tool steel inserts diamond honed• Lip safe

Modular Omega Plier

• For adjusting the expansion or contraction of the Omega loop on the Bimetric Distalizing Arch• Hook on round end to hold Omega loop

Pin and Ligature Cutter

Pin and Ligature Cutter• Concave design front for maximum vision when cutting

Plier Weingart Style

• Tips are delicate and meet precisely so that even small attachments can be firmly held• General purpose utility plier with curved beaks• Inserted tempered tips for longer life• Serrated and lip safe• Tip length 10mm• Up to .020” (.508mm)

Plier Weingart Style-Mini

• Tips are delicate and meet precisely so that even small attachments can be firmly held• General purpose utility plier with curved beaks• Inserted tempered tips for longer life• Serrated and lip safe• Tip length 6mm• Up to .016″ (0.406mm)

Posterior Band Remover

Posterior Band RemoverWedges under the band while the 5mm replaceable Teflon bumper rests on the occlusal surface for easy band removal.

Posterior Band Removing Plier

• Long chisel tip with carbide insert• Facilitates removal of posterior bands• With replaceable occlusal nylon pads• Stainless steel• Will stay sharp

Rectangular Arch Bending Plier

Tweed Style• Ideal for forming square and rectangular arch wires• Thin jaws are parallel at .020” opening• Forms offsets and 90° bends on all types of arch wire

Safety Hold Distal End Cutter

• Safety hold is ideal for cutting wires within the patient’s mouth• Plier shear-cuts and holds arch wire within .5mm of the buccal tube

Step Plier

•  Step plier is equipped with a double-sided offset beak for bayonet-style step bend• Creates right hand or left hand step-up or step-downs

Three Jaw Clasp Adjusting Plier

Aderer Type• Tips for rounded or dimensional wire up to .040” (1.016mm)• Box joint• Exact shape and position of beaks will avoid squeezing and markingof wire• Made from extra hard stainless steel

Wire Contouring Plier

Smooth, non-grooved surface, with chamfered forming surfaces for stress-free bending.

V-Bend Plier

• Special design makes 1mm “V” bends to shorten arch wires or provide a positive stop• Excellent for placing stops in nickel-titanium wires

Wire Bending Plier

Angle / Bird Beak Type• Extra hard steel• Tips meet very precisely• Cone and pyramid shaped tips• Carbide coated tips for better grip of wire and longer lifetime• Round beak is precision ground to .039” (1.0mm) at tip• Bends wire up to .022” x .025” (0.559mm x 0.635mm) and round up to .028” (0.711mm)

Marshon Band Pusher

• Serrated stainless steel tip, non-removable• Stainless steel handle – square with chamfered corners• Tip end has square serrations

Band Seating and Removing Instruments

Manufactured from High Quality Medical Grade Stainless SteelPrecision Performance for VersatilityFull Autoclavable / ReusableManufactured for Optimum Performance and Longevity

Band Seater with tin insert

Fully autoclavable, Sterilizable and corrosion resistanceTempered and hardened for a longer lifeHandcrafted to precise specifications

Band Adapter/Seater

Fully autoclavable, Sterilizable and corrosion resistanceTempered and hardened for a longer lifeHandcrafted to precise specificationsSurgical Dental Instruments

Bracket Placing Tweezer

Easy release of both metal and plastic direct bond bracketsFits narrow to wide twinManufactured from High Quality Medical Grade Stainless SteelFull Autoclavable / Reusable

Orthodontic Mathieu Ligating Pliers

Ergonomic design provides consistent feel from one instrument to the nextDurable constructionPrecise tolerances for accurate control at all timesHigh corrosion resistance without chrome plating - no risk of plating peeling offEasy instrument care - all standard sterilization procedures are applicable

Bracket Positioning Star Boone & Height Gauge

Passivated Steel to prevent CorrosionFully autoclavable and Sterilizable Tempered and hardened for a longer lifeHandcrafted to precise specificationsOrthodontic Dental Instruments

Masquito Plier

Developed for ease and assurance in placing of elastic ligatures.Precision tips and locking handles provide a positive, non-slip grip.