SOUTHEAST UNIVERSITY School of Science and Engineering, Department of Textile Engineering WELCOME TO OUR PRESENTATI ON 1
SOUTHEAST UNIVERSITYSchool of Science and Engineering, Department of Textile Engineering
WELCOMETO
OURPRESENTATION
1
SOUTHEAST UNIVERSITYSchool of Science and Engineering, Department of Textile Engineering
2
Presentation ON
WWW.ORIZIOsrl.COM
SOUTHEAST UNIVERSITYSchool of Science and Engineering, Department of Textile Engineering
• Introduction• History• Location• Customer care in
Bangladesh.
About Orizio
3
SOUTHEAST UNIVERSITYSchool of Science and Engineering, Department of Textile Engineering
ProductionCam designStandard equipmentOptional accessoriesSpecification.
4
Single jersey (FIHN-4)
SOUTHEAST UNIVERSITYSchool of Science and Engineering, Department of Textile Engineering
Single jersey (FIHN – C)• Production• Maximum versatility• Equipment• specification
5
SOUTHEAST UNIVERSITYSchool of Science and Engineering, Department of Textile Engineering
6
SINGLE JERSEY(JB41E)
• Production• versatility• Equipment• specification
SOUTHEAST UNIVERSITYSchool of Science and Engineering, Department of Textile Engineering
Features: High production Massive quality Cleaning system Yarn measuring device Feeding Frame type specification
Single jersey (JH-V)
7
SOUTHEAST UNIVERSITYSchool of Science and Engineering, Department of Textile Engineering
8
Features:• Produce 4 cam track jersey• Positive feeding• Types of yarn carriage• Cleaning system• Types of creel• specification
Single jersey (JOHN-C)
SOUTHEAST UNIVERSITYSchool of Science and Engineering, Department of Textile Engineering
Double jersey circular machine is used for the production of fabric with points for rib and interlock stripers to 5 colors and 4 electronic traces on the cylinder and two on the plate.
Optional accessories:• Elastomeric yarns kit.• ORISTRIPER programmer software.• MEMMINGER K20L1 units.
9
DOUBLE JERSEY(CMBE)
SOUTHEAST UNIVERSITYSchool of Science and Engineering, Department of Textile Engineering
10
FEATURES• Four cam track on the cylinder and two on the dial.• Needle selection by three ways.• Diameter is about 30-34 inch's.• Peripheral speed 1,20 mt/second.• R.P.M of the cylinder is about 23.• Produce rib and interlock basic structure.
SOUTHEAST UNIVERSITYSchool of Science and Engineering, Department of Textile Engineering
Feature of MJD-C:• MJD-C machine is more versatile.• The Machine has large diameter 30”-36”.• The machine gauge is normally used 14-28
needles per inch.• Maximum R.P.M of this machine 25/22.• Peripheral speed of the machine 1.0 mt/sec• It has 72-84 feeders.• The production of the machine is mini jacquard
fabrics.
11
DOUBLE JERSEY(CMBE)
SOUTHEAST UNIVERSITYSchool of Science and Engineering, Department of Textile Engineering
DEPLIANT CI -C ING
12
• Eight-lock double knit circular knitting machine for the production of interlock and interlock fabric based structures on 4 + 2 cam tracks.
Optional accessories:
• Elastomer kit• Cams for the production of various stitches • Circular creel with or without yarn air threading device• Side creel with automatic yarn air threading device• Yarn measuring device
SOUTHEAST UNIVERSITYSchool of Science and Engineering, Department of Textile Engineering
SPECIFICATIONS
13
SOUTHEAST UNIVERSITYSchool of Science and Engineering, Department of Textile Engineering
14
DEPLIANT CO5NStandard equipment:• Storage type positive yarn feeding system.• Cylinder and dial needles automatic lubrication by means of an impulse oiler.• Cleaning system for cylinder and dial needles, also for yarns passages. • Modular side creels, double-tie, fully tubed. Micrometrical stitch adjustment at each feed. • Cams placed on two races on both cylinder and dial, for the production of Punto Roma and Interlock.
SOUTHEAST UNIVERSITYSchool of Science and Engineering, Department of Textile Engineering
15
Diameter Gauge R.P.M (Max) Peripherical speed mt/ sec
Number of feeders
16 18 20 30 inchs 22 30/32 1,20 72 24 26 28 16 18 20 34 inchs 22 24/26 1,20 82 24 26 28
SPECIFICATIONS
SOUTHEAST UNIVERSITYSchool of Science and Engineering, Department of Textile Engineering
Feature:• Diagnostic warning signals.• RPM limitable from pattern.• Setting of take-down percentage.• Selection and setting of the RESET pattern.• Automatic needles and sinkers lubrication• Cleaning system on needles, sinker and yarn
passages by combined compressed air and fans
• Open latch kit for drop-stitch designs• Actuators for the needle-by-needle selection
in the three way technique16
SOUTHEAST UNIVERSITYSchool of Science and Engineering, Department of Textile Engineering
17
Specification:
Fabric pattern:
SOUTHEAST UNIVERSITYSchool of Science and Engineering, Department of Textile Engineering
18
ELECTRONIC SINGLE JERSEY(DEPLIANT JSVE ING)
Versatility: Machine with 1,5 feeds per diametrical inch. Double nib sinkers, electronically selected on three
ways technique give the possibility to knit at the same feed.
Modular, double-tie side creels. Needles and sinkers automatic lubricator.
SOUTHEAST UNIVERSITYSchool of Science and Engineering, Department of Textile Engineering
19
specification:
Fabric pattern:
Electronic Single Jersey(Depliant JSVE ING)
SOUTHEAST UNIVERSITYSchool of Science and Engineering, Department of Textile Engineering
Standard equipment:•Positive feeding units IRO-SFE.•Cylinder and dial needles automatic lubrication by means of an impulse oiler.• Cleaning system for cylinder and dial needles, also for yarns passages.•Dial camming set on Interlock and for 2-3-4 colours Jacquards. •Modular side creels, double-tie, fully tubed.
20
Electronic Double Jersey(Depliant MJD-CE)
SOUTHEAST UNIVERSITYSchool of Science and Engineering, Department of Textile Engineering
Specification:
Fabric pattern:
21
SOUTHEAST UNIVERSITYSchool of Science and Engineering, Department of Textile Engineering
Feature: Double knit circular knitting machine with
needle-by-needle selection in the three technical ways for the production of jacquard fabrics with stitch transfer.
Setting of take-down percentage. Selection and setting of the RESET pattern. Electronically controlled yarn feeding system Dial swing cams on 36 jacquard feeds
22
Electronic Double Jersey(Depliant MJT ING)
SOUTHEAST UNIVERSITYSchool of Science and Engineering, Department of Textile Engineering
Specification:
Fabric pattern:
23
SOUTHEAST UNIVERSITYSchool of Science and Engineering, Department of Textile Engineering
Frame (Basamento-chiuso)
• Feature of ALTO high frame: • The machine diameter is
normally used 24-36 inchs.• Maximum fabric width is 450
mm.• Speed of the machine is 36.• Maximum fabric roll is 900 mm.• Space required with creel is
4700x3600.24
SOUTHEAST UNIVERSITYSchool of Science and Engineering, Department of Textile Engineering
25
• Feature of super AlTO industrial frame:• The machine diameter is normally used 24-36
inchs.• Maximum fabric width is 1200 mm.• Speed of the machine is 30.• Maximum fabric roll is 1200 mm.• Space required with creel is 4700x3600.
SOUTHEAST UNIVERSITYSchool of Science and Engineering, Department of Textile Engineering
Frame (Basamento)
Feature:
26
SOUTHEAST UNIVERSITYSchool of Science and Engineering, Department of Textile Engineering
THANK YOU
27