Presented to: By: Date: Federal Aviation Administration Organizational Culture Confusing & Unclear Procedures Revision 1, 11/08/2012 <Audience> <Presenter’s Name, Title> <Date>
Nov 17, 2014
Presented to:
By:
Date:
Federal AviationAdministrationOrganizational
CultureConfusing & Unclear
Procedures
Revision 1, 11/08/2012
<Audience>
<Presenter’s Name, Title>
<Date>
2Federal AviationAdministration
<Presentation Title – Change on Master Slide><Date of Presentation – Change on Master Slide>
2
Objective
• Caution you that maintenance procedures may be incomplete, misleading, or unclear.
• How to minimize using incomplete, misleading, or unclear procedures.
• What to do if you become aware of incomplete, misleading, or unclear procedures
3Federal AviationAdministration
<Presentation Title – Change on Master Slide><Date of Presentation – Change on Master Slide>
3
Sometimes Following Procedures Leads To Improper Installation
• One Misleading Procedure Leads To Five Aircraft Accidents
4Federal AviationAdministration
<Presentation Title – Change on Master Slide><Date of Presentation – Change on Master Slide>
4
Service and Maintenance Manual
5Federal AviationAdministration
<Presentation Title – Change on Master Slide><Date of Presentation – Change on Master Slide>
5
Illustrated Parts Catalog
6Federal AviationAdministration
<Presentation Title – Change on Master Slide><Date of Presentation – Change on Master Slide>
6
SAIB NE-06-06
7Federal AviationAdministration
<Presentation Title – Change on Master Slide><Date of Presentation – Change on Master Slide>
7
WWWWWWWWWW
8Federal AviationAdministration
<Presentation Title – Change on Master Slide><Date of Presentation – Change on Master Slide>
8
Scenario Summary
• Prop Governor Installed In Accordance With: – Maintenance Manual “ONLY”– Read related documents to affirm procedure
• Illustrated Parts Catalog (IPC)• Service Instruction (SI)• Special Airworthiness Information Bulletin (SAIB)
Prior to Performing Maintenance ---- Carefully review the current applicable maintenance
instructions. Then compare to related information.
9Federal AviationAdministration
<Presentation Title – Change on Master Slide><Date of Presentation – Change on Master Slide>
9
Regulatory Requirement
• Sec. 43.13
Performance rules (general).
(a) Each person performing maintenance, alteration, or preventive maintenance on an aircraft, engine, propeller, or appliance shall use the methods, techniques, and practices prescribed in the current manufacturer's maintenance manual or Instructions for Continued Airworthiness prepared by its manufacturer, or other methods, techniques, and practices acceptable to the Administrator, except as noted in Sec. 43.16. He shall use the tools, equipment, and test apparatus necessary to assure completion of the work in accordance with accepted industry practices. If special equipment or test apparatus is recommended by the manufacturer involved, he must use that equipment or apparatus or its equivalent acceptable to the Administrator.
10Federal AviationAdministration
<Presentation Title – Change on Master Slide><Date of Presentation – Change on Master Slide>
10
What should I…the AMT… do?
• Carefully read maintenance procedures.• Determine if procedures are complete• Research available data to validate the
procedure. – IPC, SAIB, Service Letters, Overhaul Manual etc.
• www.faasafety.gov has links to many resources
• If conflicts noted-Stop, Report, and Discuss– Contact local FAASTeam FPM or FSDO ASI
11Federal AviationAdministration
<Presentation Title – Change on Master Slide><Date of Presentation – Change on Master Slide>
11
Summary
• Be wary maintenance procedures may be incomplete or misleading.
• Know there is related maintenance information that can be used to verify maintenance procedures
• There are actions you can pursue to remedy