Procedia Engineering 38 (2012) 1030 – 1036 1877-7058 © 2012 Published by Elsevier Ltd. doi:10.1016/j.proeng.2012.06.129 Available online at www.sciencedirect.com Open access under CC BY-NC-ND license. Open access under CC BY-NC-ND license.
Optimization of machining parameters in EDM
Oct 04, 2015
Optimization of machining parameters in EDM
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
-
Procedia Engineering 38 ( 2012 ) 1030 1036
1877-7058 2012 Published by Elsevier Ltd.doi: 10.1016/j.proeng.2012.06.129
Available online at www.sciencedirect.com
Open access under CC BY-NC-ND license.
Open access under CC BY-NC-ND license.
http://creativecommons.org/licenses/by-nc-nd/3.0/http://creativecommons.org/licenses/by-nc-nd/3.0/
-
1031 T. Rajmohan et al. / Procedia Engineering 38 ( 2012 ) 1030 1036
-
1032 T. Rajmohan et al. / Procedia Engineering 38 ( 2012 ) 1030 1036
-
1033 T. Rajmohan et al. / Procedia Engineering 38 ( 2012 ) 1030 1036
-
1034 T. Rajmohan et al. / Procedia Engineering 38 ( 2012 ) 1030 1036
-
1035 T. Rajmohan et al. / Procedia Engineering 38 ( 2012 ) 1030 1036
-
1036 T. Rajmohan et al. / Procedia Engineering 38 ( 2012 ) 1030 1036
Related Documents
