Optical MEMS: Overview & MARS Modulator Joseph Ford, James Walker, Keith Goossen ator based on mechanically-active antireflection layer with 1 Mbit/sec capability” , J. Walker and S. Arney, IEEE Photonics Tech. Lett. 6, p.1119, 1994 al fiber-optic attenuator with 3 microsecond response" . Walker, D. Greywall and K. Goossen, IEEE J.of Lightwave Tech. 16(9), 1663-1670, Sept ral power equalization using micro-opto-mechanics" d J. Walker, IEEE Photonics Technology Letters 10(10), 1440-1442, October 1998 al gain slope compensator for spectrally linear power equalization" , J. Walker, D. Neilson, J. Ford, W. Knox, IEEE Photonics Tech. Lett.12(7), pp. 831-8 d/drop switching using tilting micromirrors" . Aksyuk, D. Bishop and J. Walker, IEEE J. of Lightwave Tech. 17(5), 904-911, May 1999 persion compensating MEMS all-pass filter" lker, Ford. Goossen, Nielson, Lenz, IEEE Photonics Tech. Lett. 12(6), pp. 651-653, Ju
22
Embed
Optical MEMS: Overview & MARS Modulator Joseph Ford, James Walker, Keith Goossen References: “Silicon modulator based on mechanically-active antireflection.
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Optical MEMS:Overview & MARS Modulator
Joseph Ford, James Walker, Keith Goossen
References:“Silicon modulator based on mechanically-active antireflection layer with 1 Mbit/sec capability” K. Goossen, J. Walker and S. Arney, IEEE Photonics Tech. Lett. 6, p.1119, 1994 "Micromechanical fiber-optic attenuator with 3 microsecond response" J. Ford, J. Walker, D. Greywall and K. Goossen, IEEE J.of Lightwave Tech. 16(9), 1663-1670, September 1998 "Dynamic spectral power equalization using micro-opto-mechanics" J. Ford and J. Walker, IEEE Photonics Technology Letters 10(10), 1440-1442, October 1998 "Micromechanical gain slope compensator for spectrally linear power equalization" K. Goossen, J. Walker, D. Neilson, J. Ford, W. Knox, IEEE Photonics Tech. Lett.12(7), pp. 831-833, July 2000. "Wavelength add/drop switching using tilting micromirrors" J. Ford, V. Aksyuk, D. Bishop and J. Walker, IEEE J. of Lightwave Tech. 17(5), 904-911, May 1999. "A tunable dispersion compensating MEMS all-pass filter" Madsen, Walker, Ford. Goossen, Nielson, Lenz, IEEE Photonics Tech. Lett. 12(6), pp. 651-653, June 2000.
What are MEMS? Micro-Electro-Mechanical Systems
• Surface Micromachining• LIGA (electroforming)• Deep Reactive Ion Etching
Analog Devices' ADXL50 accelerometerSurface micromachining capacitive sensor 2.5 x 2.5 mm die incl. electronic controls
Cost: $30 vs ~$300 bulk sensor (‘93) Cut to $5/axis by 1998 Replaced by 3-axis ADXL150
“Every new car sold has micromachined sensors on-board. They range from MAP (Manifold Absolute Pressure) engine sensors, accelerometers for active suspension systems, automatic door locks, and antilock braking and airbag systems. The field is also widening considerably in other markets. Micromachined accelerometer sensors are now being used in seismic recording, machine monitoring, and diagnostic systems - or basically any application where gravity, shock, and vibration are factors.”
Capacitive Accelerometer
Silicon substrate
Elastic hinge Proof Mass
Spacer Force
Mass commercial application: Pressure Sensors
Capacitive Pressure Sensor
Silicon substrate
Pint
Pext
Spacer
Membrane
Force
MeasureRC time
NovaSensor’s piezo-resistive pressure sensors Disposable medical sensor
High-pressure gas sensor(ceramic surface-mount)
Piezo-resistive pressure sensor
substrate
magnetic layer
EM coil
conductive substrate
conductive layer
insulator
substrate
patterned resistive layer
substrate
electrostrictive layer
Force
Force
Force
Force
ApplyCurrent
ApplyVoltage
Electrical actuation of active MEMS devices
Electrostatic attraction
Resistive heatingElectrostriction
Electromagnetic force
ApplyCurrent
Apply Voltage
Surface Micromachining: Layer by layer additionStarting from bare silicon wafer, deposit & patternmultiple layers to form a (shippable) MEMS wafer
From Cronos/JDSU MUMPS user guide at www.MEMSRUS.com
Assembly = mechanical manipulation of structures (e.g., raising and latching a vertical mirror plate)Various techniques used, some highly proprietary
Release = isotropic chemical etch to remove oxidesSpecial techniques may be used to remove liquid (e.g., critical point drying)
Diced and released MEMS device
Completed MEMS wafer
~ 10 mask steps
Texas Instruments Digital Light Projector& DLP PROJECTOR
TM
1st Optical MEMS device
Bulk MEMS Fabrication: Pattern & selective etch
(2) DRIE vertical etch
samlab
bulk silicon substrate
Example: Bulk silicon DRIE: start with unpatterned wafer stack – a wafer-bonded SOI (silicon on insulator)
wafer-bonded silicon
sacrificial silicon oxide
(1) Pattern photoresistphotoresist
(4) Gold evaporation
Gold mirrors on topand potentially sides
(3) SiO2 isotropic etch
Narrow features released,Wide features just undercut
Conclusions: (1) Properly designed MEMS devices are remarkably shock resistant (2) Flexural failures due to fatigue were not apparent(3) Rubbing wear (& resulting debris) was their primary failure mechanism
40,000G impact testCeramic package destroyed
MEMS survives (!)
Micromotor test deviceComb-drive actuator
Flexural contact to gears
Failure by rubbing contactWear on silicon surface
Submicron particles generated
“MEMS Reliability: Infrastructure, Test Structures, Experiments and Failure Modes” 171 page report by D. M. Tanner et al, SAND2000-0091, January 2000.
www.sandia.gov
Optical MEMS Devices Classical vs Resonant
Lucent’s “LambdaRouter” DeviceSir Isaac Newton
(1642-1727) …and his Corpuscular Theory of Light
“Classical” optical MEMS
1st-surface reflection
Sir Isaac Newton (1642-1727)
…and his Corpuscular Theory of LightSilicon Light Machine’s Grating Light Valve
Ford, Walker, Greywall & Goossen, IEEE J. Lightwave Tech. 16, 1998Greywall, Busch & Walker, Sensors & Actuators A A72, 1999.
500 um DPOL drum w/ 300 um window has 1.1 microsecond response
110 um SiNx drum w/ 30 um window has 85 nanosecond response(used for 16 Mb/s digital data modulation)
Voltage Response
theory
measured
Drive voltage (V)
MARS Applications: - Data modulator - Variable attenuator - Dynamic spectral equalizer - Dispersion compensator (see references or other presentations)