Profile Projector PV-5000 Catalog No. E4136-304 Optical Measuring Vertical-type precision profile projector that employs a digital display protractor screen with an effective diameter of 508mm.
�����������������������������������������
�����������������������������
������������������������������
��������������
�����������������
����������������
�����������������������������
������������������������
���������������������������������������������������������������������������������������������������������������������������������������������������������������
Profile ProjectorPV-5000
Catalog No. E4136-304
Optical Measuring
Vertical-type precision profile projector that employs a digital display protractor screen with an effective diameter of 508mm.
2
The Mitutoyo PV-5000 is a vertical-type precision profile projector that employs a digital display protractor screen with an effective diameter of 508mm. If the 5X projection lens is used, this wide screen allows workpieces with a diameter as large as 100mm to be projected in their entirety. In addition, the low posi-tion of the screen allows for easy operation, thereby reducing operator fatigue that may result if used over an extended period of time. Thanks to the large XY stage for the PV-5000, highly efficient measurement can be made of large press workpieces, lead frames, etc.
FEATURES• Floor model that uses a downward illumination system.• Digital readout protractor screen (including zero-set-
ting, ABS/INC coordinate switching functions) for easy and error-free angle measurement.
• Angled screen allows projected images to be easily traced or compared with a template.
• The optional oblique surface illumination unit (172-418) provides clear and bright images, allowing easy inspec-tion of non-reflection workpieces such as plastic parts or printed materials.
PV-5000 with optional accessories
3
470 (18.5")
ø508 (22.4")
620 (24.4")
830 (32.7")
890
(35.
1")15
20 (5
9.8"
)
510 (20.1")
1068 (42.2")
1016 (40.2")
1160
(45.
6")
Unit: mm (inch)
Workingdistance
Max. workpieceheight Max. workpiece diameter
whose edge line can be focused on the screen center
D
W
H
Projection lenses (optional)
Projection Capacity
Unit: mm
Illumination Contour or Surface
Magnification 5X 10X 20X 50X 100X
View field diameter 100 50 25 10 5
W 57 (32) 57 (57) 57 (57) 32.4 22.5
H 125 181 206 87 87
D 114 114 114 64.8 45( ): When using surface illumination Note: Surface illumination is not available at 50X and 100X magnifications.
DIMENSIONS
Note: Counter stand (512089) is optional.
SPECIFICATIONSModel No. PV-5000Order No. 100V 304-201-1
110V 304-201-1C 120V 304-201-1A
220V/230V 304-201-1D 240V 304-201-1EXY table (Optional)
Protractor Effective diameter 508mm (20”)Screen Screen material Fine-grain-ground glass
Reference line Staggered crosses and crosshairs
Display range ±370°
Resolution 0.01° or 1' (switchable)
Function Zero-setting, ABS/INC switching
Projection lens (Optional)
Magnification accuracy Contour illumination: ±0.1% or less Surface illumination: ±0.15% or less
Contour Light source Halogen bulb (24V, 150W)illumination Optical system Telecentric system
Functions 2-step brightness switch, cooing fan, heat-absorbing filter, green filter (optional)
Power supply 100/110/120/230/240V AC, 50/60Hz
Mass 180kg (396 lbs.)
Standard accessories Halogen bulb 24V 150W (1pc.), power cord, machine cover (510189), user’s manual
4
172-319
172-401172-402 172-403
172-404 172-405
512089
172-160-2
172-161172-162172-329
172-116172-117172-330
172-196
176-107
172-197
172-378
172-418
999678(Required for 319-225-1)
319-222-1319-225-1
KA Counter
Attachment (B)12AAE672
QM-Data 200
172-198
332-151
Optoeye
KA Counter Display Unit• The basic and most affordable display unit for linear
scales.Order No. 174-173■
Resolution 0.005mm/0.001mm (.0005”/.0001”)
Output RSS-232C interface (09CAB217) is optional.
■ To denote your AC line receptacle/cable add the following suffixes (e.g. 174-173A). A for UL/CSA type, C for JAPAN type, D for CEE type, E for BS type, K for EK (South Korea) type, DC for CCC (China) type.
QM-Data200• The QM-Data 200 is a 2-D data processing unit for op-
tical instruments*. This features powerful 2-D coordi-nate measurement capabilities with unmatched simple key operation.
Optoeye
■ To denote your AC line receptacle/cable add the following suffixes (e.g. 264-140A). A for UL/CSA type, C for JAPAN type, D for CEE type, E for BS type, K for EK (South Korea) type, DC for CCC (China) type.
264-141■
SYSTEM DIAGRAM
332-151
12AAE672
5
Rotary Table• Angle reading: 2’• Effective dia.: 100mm• Holder with clamp
(176-107) can be mounted.
172-198
Holder with Clamp• Workpiece height:
35mm max.
176-107
Fixture Mount Adapter• Used for mounting
fixtures such as a rotary table and swivel center support on 319-225-1 stage.
999678
Standard Scales• Used for checking mag-
nifying accuracy.
172-116 (50mm)172-330 (80mm)172-117 (2”)
Surface Illumination Unit• Twin-bulb type oblique
illumination.• Light source: Halogen
bulb (24V, 150W)• Magnification: 5X, 10X,
20X only
172-418
Swivel Center Support• Workpiece dia.:
80mm max.• Swivel: ±10˚• Suitable for clamping
cylinders and ball screws, etc.
V-block with Clamp• Workpiece dia.:
25mm max.
172-378
Green Filter• Increases the screen
sharpness of the contour image.
172-160-2
Reading Scales• Designed for checking
the magnified image of a standard scale.
172-161 (300mm)172-329 (600mm)172-162 (12”)
XY TableOrder No. 319-222-1 319-225-1XY range 100x50mm (4”x2”) 200x100mm (8”x4”)
Effective area 180x150mm (7.09”x5.91”) 266x170mm (10.47”x6.69”)
Stage size 300x240mm (11.81”x9.45”) 380x250mm (14.96”x9.84”)
Measuring unit Built-in linear scales (Optional) Built-in linear scales (Optional)
Swivel range ±5˚ ±3˚
Maximum workpiece load 10kg (22lbs.) 5kg (11lbs.)
Mass 18.5kg (40.7lbs.) 18.5kg (40.7lbs.)
Remarks Floating travel (on X axis only) Floating travel (on X and Y axes)
OPTIONAL ACCESSORIES
172-197
172-196
�����������������������������������������
�����������������������������
������������������������������
��������������
�����������������
����������������
�����������������������������
������������������������
���������������������������������������������������������������������������������������������������������������������������������������������������������������
Note: All information regarding our products, and in particular the illustrations, drawings, dimensional and performance data contained in this pamphlet, as well as other technical data are to be regarded as approximate average values. We therefore reserve the right to make changes to the corresponding designs, dimensions and weights. The stated standards, similar technical regulations, descriptions and illustrations of the products were valid at the time of printing. In addition, the latest applicable version of our General Trading Conditions will apply. Only quotations submitted by ourselves may be regarded as definitive.
68.0
0040
1 (8
) A
PR, P
rinte
d in
Jap
an