191 OPTICAL INSTRUMENTS Tel: 08708 50 90 50 Fax: 08708 50 90 60 Partners in Precision Metallurgical Microscope Inverted and compound metallurgical microscope suitable for observing the microstructure of non-transparent objects. Clear, crisp and high- contrast image with or without colour filters. Professional instrument for research work in metallographic environments or laboratories, mineralogy, precision engineering, electronics, etc. Features • Plan achromatic objectives with long working distance (no cover glass) and wide-field eyepieces • Clear and crisp images from the eyepiece or from the video channel • Video channel connector (CCD adaptor) optional • Works with normal cameras or video systems • Large displacements of the mechanical stage, quick or slow movement • Coaxial coarse/fine focus system, tension adjustable, upper limit stop, minimum division of fine focusing: 0.7µm • 6V 20W halogen lamp, adjustable brightness • Trinocular system, can easily be switched from manual observation to video channel TECHNICAL SPECIFICATION W-MM600 W-MM650 Eyepiece Wide field WF10X 18mm and Wide field WF12,5X 14mm Wide field WF10X (18mm) Objectives Plan achromatic objectives with long working distance (no cover glass) PL 10X/0.25 PL 20X/0.40 PL 40X/0.60 PL 100X/1.25 (oil) Plan achromatic objectives with long working distance (no cover glass) PL 5X/0.12 PL 10X/0.25 PL 20X/0.40 PL 40X/0.60 PL 80X/0.80 Eyepieces tube Trinocular, Inclination of 450, (Analyzer, switchable field diaphragm) Trinocular, Inclination of 30º, (Analyzer, switchable field diaphragm) Vertical illumination unit 6V 30w, halogen lamp, with brightness control 6V 20w, halogen lamp, with brightness control Vertical illumination Field diaphragm, aperture diaphragm and polarizer, (Y,B,G) filter and Field diaphragm, aperture diaphragm and polarizer, (Y,B,G) filter and frosted filter, Filters Blue, Green, Grey, White frosted filter Focus system Focus system, with tensional adjustable, up limit stop, minimum division of fine focusing: 0.7µm Stage adjustable, Coaxial coarse/fine focus system, with tensional adjustable, up limit stop, minimum division of fine focusing: 0.7µm Nosepiece Quintuple (Frontward ball bearing innerlocating) Quintuple (Frontward ball bearing innerlocating) Stage Three layer mechanical Size:180mm x 165mm Plates 10 and 20 included Traverse 50x40mm Three layer mechanical Size:250mm x 230mm, (Standard) Traverse range:154mm x 154mm Size:280mm x 270mm, (Optional) Traverse range: 204mm x 204mm METALLURGICAL MICROSCOPE Code No Description W-MM600 Inverted Metallurgical Microscope W-MM650 Metallurgical Microscope W-MM600 W-MM650 OPTIONAL ACCESSORIES Code No W-MM600 W-MM650 Eyepiece Wide field WF10X 20mm Wide field WF16X 13mm Huygenian ocular 5X 20mm Wide field WF16X(11mm) Dividing 10X(|µ18mm) 0.1mm/Div Objectives Plan achromatic objectives with long working distance (no cover glass) PL 50X 0.70 PL 60X 0.75 PL 100X 0.85 (Spring) PL 100X 1.25 (Spring, oil) Filters As Standard Green & Yellow filter Stage plate 40mm CCD adapter As Standard 0.4X ; 0.5X ; 1X ; 0.5X with dividing 0.1mm/Div Camera system Windows PC based software for image analysing DV-1 (With USB & video output) DV-2 (With USB output) DV-3 (With video output) Photographic unit 10X Viewing eyepiece 2.5X/4X Change over photograph attachment 4X Focusing photograph attachment 10X Viewing eyepiece 2.5X/4X Change over photograph attachment 4X Focusing photograph attachment Digital camera adapter 1X C-mount adapter, 0.6X C-mount adapter CANON (A610, A620, A630, A640)
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Metallurgical MicroscopeInverted and compound metallurgical microscope suitable for observing the microstructure of non-transparent objects. Clear, crisp and high-contrast image with or without colour filters. Professional instrument for research work in metallographic environments or laboratories, mineralogy, precision engineering, electronics, etc.
Features• Plan achromatic objectives with long working distance
(no cover glass) and wide-field eyepieces• Clear and crisp images from the eyepiece or from the
video channel• Video channel connector (CCD adaptor) optional• Works with normal cameras or video systems• Large displacements of the mechanical stage, quick or
limit stop, minimum division of fine focusing: 0.7µm• 6V 20W halogen lamp, adjustable brightness• Trinocular system, can easily be switched from manual
observation to video channel
TECHNICAL SPECIFICATION
W-MM600 W-MM650Eyepiece Wide fi eld WF10X 18mm and Wide fi eld WF12,5X 14mm Wide fi eld WF10X (18mm)
Objectives
Plan achromatic objectives with long working distance (no cover glass)PL 10X/0.25PL 20X/0.40PL 40X/0.60 PL 100X/1.25 (oil)
Plan achromatic objectives with long working distance (no cover glass) PL 5X/0.12PL 10X/0.25PL 20X/0.40 PL 40X/0.60PL 80X/0.80
Eyepieces tube Trinocular, Inclination of 450, (Analyzer, switchable fi eld diaphragm) Trinocular, Inclination of 30º, (Analyzer, switchable fi eld diaphragm)Vertical illumination unit 6V 30w, halogen lamp, with brightness control 6V 20w, halogen lamp, with brightness controlVertical illumination Field diaphragm, aperture diaphragm and polarizer, (Y,B,G) fi lter and Field diaphragm, aperture diaphragm and polarizer, (Y,B,G) fi lter and
frosted fi lter, Filters Blue, Green, Grey, White frosted fi lter
Focus system Focus system, with tensional adjustable, up limit stop, minimum division of fi ne focusing: 0.7µm
Stage adjustable, Coaxial coarse/fi ne focus system, with tensional adjustable, up limit stop, minimum division of fi ne focusing: 0.7µm
Baty R14 - Profile ProjectorThe instantly recognisable R14 design dates back decades! With thousands of units sold the world over, the R14 has become the
industry standard by which others are measured.
Features• 0.5 micron X, Y measuring resolution
• 340mm (14") screen with 90 degree crosslines and chart clips
• Profile illumination with halogen lamp and green filter
Baty SM350 - Profile ProjectorWith virtually all components designed in-house by Baty, this completely new design offers a flexible solution to most measurement
problems. This vertical 14" / 350mm screen projector offers a 3-position lens turret for instantaneous lens change without recalibration.
Features• Fully usable 340mm screen
• Digital Screen Protractor
• Built in helix adjustment
• 3-Position turret
• Sturdy all-steel design
• Cross roller bearings
• Quick release "X" and "Y" travel
• Erect image
• Easy-view vertical screen
• Large stage travel 10" (250mm) x 5" (125mm)
• Rotating chart clips
• Fibre optic illumination for surface measurement
• Includes 10x lens
Available Options• Automated measurement system
with joystick control
• Automatic edge sensing
• Motorised focus axis
• Heavy duty cabinet
• Touch trigger probe for fast Z axis measurement
LENS SYSTEMS
Code No Description
122-600 Lens system - magnification 10x
122-601 Lens system - magnification 20x
122-602 Lens system - magnification 25x
122-603 Lens system - magnification 50x
122-604 Lens system - magnification 100x
BATY SM350
Code No Description Lens Includes
SM350-XLS Horizontal projector with QC100 two axis digital readout 10x lens Surface illumination
SA-276 Single vee and clamp (Vee parallel to optic axis)
SA-153 Fixture base
SA-527 Glass plate work holder
FIXTURE FAMILY ACCESSORIES
Code No Description
52-600 Self centering vice
52-601 Dual axis vee block and clamp to Ø 15mm
52-602 Dual axis vee block and clamp to Ø 30mm
52-603 Precision rotary base
52-604 Universal base
52-605 Precision ground steel alignment feature
52-606 Magnetic vee block
52-701 Dual axis vee block fitted with side base
SM350 ACCESSORIES
Code No Description
SA-245-2 Rotary glass stage
SA-370 Back stop
SA-371 Side stop
SA-196-EXT Dual vee block and centres
FM-2510 Open frame fixturing for 2510 stage
SA-551 Iris diaphragm for SM350
350-035 Protective cover SM350
SA-527 Rotary Axis SA-250 52-602
SA-256 / SA-258 52-701 /
52-604
SA-152 52-600 / 52-603
SA-260 52-605 SA-542 Large Vee Blocks
and Centres
SA-543 Riser Blocks
Rotary Glass Stage
SA-245-2
SA-370 Back Stop
SA-371 Side Stop
SA-196-EXT Dual Vee
Blocks and Centres
FM-2510 Open Frame
Fixturing
BUK2012_P196-197.indd 197 23/01/2012 12:22
198
OPTICAL INSTRUMENTS
For more information visit www.bowers.co.uk
Baty Vision Systems – VuMasterThis innovative British design combines a large measuring range with powerful Fusion Video Edge Detection tools in a cost effective bench top package.
VuMaster is a manual 2D vision system with a massive difference.
Due to the newly patented Colourmap™ scale system, the VuMaster does not have a conventional stage or encoders – just a floating measuring camera that moves anywhere in the measuring range. The result is fast, accurate, ‘non contact’ measurement over a much larger measuring range – 400mm x 300mm to be exact!
Because the camera moves and the part stays still, there is often no need for expensive and time consuming work holding devices.
Although VuMaster is manually* operated, inspection routines can be recorded and stored. When played back, these ‘programs’ guide the operator through a pre-defined inspection procedure recreating the same lighting conditions and using ‘Video Edge Detection’ to automatically ’capture’ feature data.
Finally, a report is generated in the form of a fully dimensioned drawing of the measured part.
Features• Large 400mm x 300mm measuring range• Patented measuring technology• Teach and repeat part programming• Video edge detection• Digital zoom• Fully integrated system – everything is
included: built-in PC, 19" flat screen monitor and printer
• Programmable segmented LEDlighting system
• Motorised autofocus• Image grab
* CNC option available
VuMaster
VUMASTERCode No DescriptionVM-4030-2D-M VuMaster Manual including 19" LCD monitor and PrinterVM-4030-2D-C VuMaster CNC including 19" LCD monitor and PrinterVI-Stand All steel machine stand with Granite topCAL-MAG-2 Glass calibration artefact
Baty Vision Systems – Venture & Fusion 3DBaty’s powerful Fusion software is also available with full 3D functionality for use with the Venture range of Vision systems.
The measured part can now be dimensioned in all three projections showing true 3D results.
Touch ProbeThe popular Renishaw Touch probe option
often helps to solve complex 3D measurement
applications. The software allows the use of both
touch probe and camera measurements in the same
inspection so features that are out of the camera’s
view can be measured without re-positioning
the part.
As with all Ventures, a high precision zoom lens
is featured as standard. This manual version has 6
preset zoom positions which provide a magnification
range from approx. 30x – 200x* which can be
extended with the use of auxiliary lenses. Each
preset position is pre-calibrated enabling the user to
quickly select the optimum magnification for each
measurement and continue measuring.
Easy ReportingIn addition to a graphical representation of the
measured part, detailed reports can be instantly
created showing the feature name, nominal
dimension, actual, error, upper and lower limits and
a green pass or red fail label for each measured
dimension in tabulated format. Geometric tolerance
details can also be displayed along with a thumbnail
view of the part and batch/customer information.
The entire report can be duplicated as an Excel
workbook for email.
Features• Fully dimensioned part view
• CAD import / export
• Profile scanning and best fit to CAD master
• SPC batch information including control charts
• Output to Excel™
• 64 LED programmable segmented surface
illumination
• Advanced video edge detection
• TTL light and collimated profile illumination
Venture AB3-V options• Motorised Z axis
• Autofocus
• Renishaw touch probe
• Manually indexable rotary axis
VENTURE AB3-V MANUAL
Code No Description
AB3-V Venture Manual with Fusion 3D software, 250mm x125mm stage, incl. PC and 2 x 19" monitors
3030 X,Y Stage upgrade to 300 x 300mm
CAL-MAG 2 Glass calibration artefact
BUK2012_P198-199.indd 199 23/01/2012 12:23
200
OPTICAL INSTRUMENTS
For more information visit www.bowers.co.uk
Baty Vision Systems – Venture & Fusion 3DVenture CNC models take the power of fusion software one stage further by completely automating the inspection process.
Standard CNC system features include:• Teach and Repeat programming• Programmable segmented LED lighting• High resolution 0.5µm scales for increased accuracy• CAD import / export • Scanning & best fitting• Fully dimensioned part view• SPC included• One click output to Excel™• Autofocus• 165mm Z axis measuring range on adjustable dovetail slide• 250mm x 125mm and 300mm x 300mm XY stages available
Automatic InspectionAdvanced features like scanning and best fitting can be done quickly without taking up the time of skilled operators.
CNC programming is a simple teach and repeat process. Just measure the part once and a full CNC program is created automatically. The zoom lens can also be controlled so that magnification changes are all recorded into the program.
Programmable Segmented LightLighting is critical to ensure that the correct edge is measured. Baty’s new programmable LED lighting head allows the user to define any segment pattern to be switched on. This means that oblique lighting conditions can be achieved to illuminate more difficult edges.
Segments can then be rotated and intensity varied to suit the radial position of the edge. Once set, the lighting condition for each measured feature is now automatically programmed and will be reproduced by the software each time a new part is measured. Through the lens (TTL) lighting is included for applications like blind bore measurement. 64 white LEDs are used to ensure Venture’s high quality colour image is achieved.
Only now can this functionality be combined with traditional touch probe technology to offer the ultimate in multi-sensing Vision systems – Venture.
Venture AB3-V-CNC
Baty’s programmable segmented LED
lighting
VENTURE AB3-V-CNCCode No DescriptionAB3-V-CNC Venture CNC with Fusion 3D software, 250mm x 125mm stage, incl. PC and 2 x 19" Monitors3030 X, Y Stage upgrade to 300mm x 300mmCAL-MAG 2 Glass calibration artefactTP-20 Kit Touch probe kit incl ref ball, module and stylus
Venture Plus additional features include:• Rigid, low mass bridge construction
• Integral zoom optics
• 250mm Z axis measuring range
• 640mm x 600mm and 640mm x 900mm bridge formats available
• Supplied with machine stand
Baty Vision Systems – Venture PlusThe Venture Plus range includes all of the standard Venture features with a little more... measuring range, that is.
Large Measurement VolumeThe Venture Plus is available in four models:
VP-6460 with 640mm x 600mm x 250mm measuring range
VP-6490 with 640mm x 900mm x 250mm measuring range
VP-100100 with 1000mm x 1000mm x 400mm measuring range
VP-100150 with 1000mm x 1500mm x 400mm measuring range
The bridge type construction is all aluminium resulting in low inertia and low thermal mass. Air bearings are used on all axes and a granite Y beam is used for increased accuracy. This ensures that the machine will expand and contract uniformly with temperature changes ensuring minimal distortion and subsequent errors. Ambient temperature can be compensated for within the Fusion software making Venture Plus ideal for use on the shop floor.
Complete with our standard zoom optics and lighting, Venture Plus offers the same level of camera based functionality as every other Venture.
The use of a touch probe is optimised on a CNC system. Measurements from data points taken using the touch probe can be combined with those taken using Video Edge Detection for optimum speed and reduced inspection times.
A probe changer rack can be installed so that probe modules fitted with a variety of pre- calibrated styli can also be used in the same inspection. When a change of stylus is required, the system automatically puts the current probe module back in the rack and picks up the next to continue the inspection process. Only now can this functionality be combined with traditional touch probe technology to offer the ultimate in large format multi-sensing Vision systems – Venture Plus.
VENTURE PLUSCode No DescriptionAB 6460 Venture Plus CNC with Fusion software and Touch probe - includes PC and 2x19"monitors (640 x 600 x 250mm) AB 6490 Venture Plus CNC with Fusion software and Touch probe - includes PC and 2x19"monitors (640 x 900 x 250mm)AB 100100 Venture Plus CNC with Fusion software and Touch probe - includes PC and 2x19"monitors (1000 x 1000 x 400mm)AB 100150 Venture Plus CNC with Fusion software and Touch probe - includes PC and 2x19"monitors (1000 x 1500 x 400mm)CAL-MAG-2 Glass calibration artefact
BUK2012_P200-201.indd 201 23/01/2012 14:54
202
OPTICAL INSTRUMENTS
For more information visit www.bowers.co.uk
Baty Vision Systems – Technical Specification
MANUAL SYSTEMS
VM-4030 Vu Master VI-2510 Venture VI-3030 Venture
X, Y, Z measuring range (mm) 400 x 300 250 x 125 x 165 300 x 300 x 165