Operating Instructions Sartorius Combics Series Complete Scales Models CAW3P | CAW3S | CAH3 98648-018-49
Operating Instructions
SartoriusCombicsSeriesCompleteScalesModelsCAW3P|CAW3S|CAH3
98648-018-49
ContentsNotes on Using this Manual 3Warnings and Safety Precautions 4Device Description 6
IntendedUse 6OverviewofEquipment 7
Installation 8Getting Started 12
ConnectingPeripheralDevicesorAnotherPlatform 12ConnectinganISWeighingPlatformtoaCombics3 13ConnectingPeripheralDevicesora2ndWeighingPlatform:Combics3,ModelCAW3S|CAH3 14InterfacePinAssignmentChartCOM1 15ConnectingaPCviaInterfaceCOM1 16InterfacePinAssignmentChartCOM2 17ConnectingaPCviaInterfaceCOM2 18InterfacePinAssignmentChartPS2 19
Scale Configuration 21ServiceMode 21EnteringAdjustmentandLinearizationWeights 32FunctionAllocationoftheAllocationfortheJKeyforCalibration/Adjustment 38ExternalAdjustment 39InternalCalibration 43AdjustmentWithoutWeights 43FunctionAllocationoftheJKeyforLinearizationandSetting/DeletingthePreload 46ExternalLinearization 47SettingthePreload 50ClearingthePreload 51
Operating Design 52WeighingOperatingDesign 52MenuOperatingDesign 58Configuration 59SetupOverview(Parameters) 63
Operation 76Weighing 76Calibration,Adjustment 86InternalAdjustmentforCAHModels 90SQminFunction 91DataIDCodes 94
Data Interfaces 96ConfiguringtheDataInterfaceasaCOMPort 99DataInputFormat 101DataOutputFormat 102ConfiguringtheDataInterfaceasaPrinterPort 106ConfiguringaPrintout 107GMP-compliantPrintouts 108SamplePrintouts 109ErrorCodes 115
Care and Maintenance 117Service 117Repairs 117Cleaning 117SafetyInspection 118Disposal 119
Specifications 120Balance Dimensions 123Accessories 125Documents List 128Sartorius Services 128Declaration of Conformity 129
ECType-approvalcertificate 131TestCertificate 132PlatesandMarkings 133
Appendix: Guide to Verification of Weighing Instruments 137
Explosion-risk area Zone 2 or 22 140Appendix: Passwords 145
2 OperatingInstructionsCombicsCompleteScales
Contents
NotesonUsingthisManualt Pleasereadthisentiremanualcarefullyandcompletelybeforeusingthedevice.t Readthesafetyprecautionscarefully.t Thismanualispartoftheproduct.Keepitinasafeandeasilyaccessible
location.t Ifthemanualshouldbelostormisplaced,pleasecontactSartoriusfora
replacementordownloadthelatestmanualfromourwebsite:www.sartorius-mechatronics.com
Symbols and SignsThefollowingsymbolsareusedinthismanual:
2 Warning symbol for various types of dangers. ThesesymbolsareexplainedinmoredetailinSection“SafetyInstructions.“
h Thissymbolindicatesusefulinformationandtips.
ThissymbolindicatesnotesonuseinlegalmetrologywithinthescopeofvalidityofCouncilDirectiveNo.90/384/EEC,replacedby2009/23/EC(modelsMS...-.CE...).
e, 1, Thisandsimilarsymbolsmeanthattherespectivekeyshouldbepressed.
T T ..., Thismeansthatthiskeymustbepressedmorethanonce.
t Indicatesarequiredactiony Describestheresultofanaction1. Ifaprocedurehasmultiplesteps...2. ...thestepsarenumberedconsecutively.– Indicatesaniteminalist
h Technical advice/hotline:Phone: +49.551.308.4440Fax: +49.551.308.4449
OperatingInstructionsCombicsCompleteScales 3
NotesonUsingthisManual
WarningsandSafetyPrecautionsCombicsindicatorscomplywiththeEuropeanCouncilDirectivesaswellasinternationalregulationsandstandardsforelectricalequipment,electromagneticcompatibility,andthestipulatedsafetyrequirements.Improperuseorhandlingcan,however,resultindamageand/orinjury.
t Readtheseoperatinginstructionscarefullybeforeuse.Thiswillpreventdamagetotheequipment.
3
Theprotectiveconductormustnotbedisconnectedforanyreason.Useonlystandardcablesthathaveprotectivegroundingconductors.
3
Ifthereisvisibledamagetotheequipmentorpowercord:unplugtheequipmentandsecureitagainstfurtheruse.
3
Makeabsolutelysuretounplugtheindicatorfrompowerbeforeyouconnectordisconnectanyelectronicperipheraldevicestoorfromtheinterfaceport.
3
ThedeviceshouldonlybeopenedbypersonneltrainedinaccordancewithSartoriusguidelines.
3
Ifyouuseelectricalequipmentininstallationsandunderambientconditionsrequiringhighersafetystandards,youmustcomplywiththeprovisionsasspecifiedintheapplicableregulationsforinstallationinyourcountry.
3
TheoperatorshallberesponsibleforanymodificationstotheequipmentandforanyconnectionsofcablesorequipmentnotsuppliedbySartoriusandmustcheckand,ifnecessary,correctthesemodificationsandconnections.InformationonoperationalqualityisavailableuponrequestfromSartorius(inlinewithnormspertainingtoimmunity).
3
Donotexposetheequipmenttoaggressivechemicalvaporsortounnecessarilyextremetemperatures,moisture,shocks,orvibration.
3
Onlycleanthedeviceasstipulatedinthecleaninginstructions:Refertothe“CareandMaintenance“chapter.
3
Thedisplayvaluecanbeaffectedbyextremeelectromagneticinfluences.Oncethedisturbancehasceased,theinstrumentcanbeusedagaininaccordancewithitsintendedpurpose.
Danger of Explosion!
1 Donotusethisequipmentinhazardousareas.
4 OperatingInstructionsCombicsCompleteScales
WarningsandSafetyPrecautions
Installation
3 Warningwhenusingpre-wiredRS-232connectingcables:RS-232cablespurchased
fromothermanufacturersoftenhavepinassignmentsthatareincompatiblewithSartoriusproducts.Besuretocheckthepinassignmentsagainstthechartinthismanualbeforeconnectingthecable,anddisconnectanylinesidentifieddifferentlyfromthosespecifiedbySartorius.
3
ConnectonlySartoriusaccessoriesandoptions,astheseareoptimallydesignedforusewithyourdevice.Therefore,donotuseanyproprietarysolutions.TheoperatorshallbesolelyresponsibleforinstallationandtestingofanymodificationstoSartoriusequipment,includingconnectionofcablesorequipmentnotsuppliedbySartorius.Informationonoperationalquality(inlinewithnormspertainingtoimmunity)isavailableonrequest.
t Ifyouhaveanyproblemswithyourdevice,contactyourlocalSartoriusoffice,dealerorservicecenter.
IP Protection Rating IPRating – AllmodelsareratedtoIP44(withoptionL1:IP65)
– CAWxSmodelsareratedtoIP67.– CAH1E*models:platformIP65,indicatorIP69K.– CAH1G*models:platformIP67,indicatorIP69K.– CAWxSmodelsareratedtoIP69Kwiththe“I69“option.– Completescaleswithsecuredprotectivecapsmustbeinstalledandtestedbya
certifiedtechnician.– Ifyouinstallaninterfaceportorbatteryconnectionaftersettingupyour
indicator,keeptheprotectivecapinasafeplaceforfutureuse.Thecapprotectstheinterfaceconnectorfromvapors,moistureanddustordirt.
Use in Legal Metrology– Whentheindicatorisconnectedtoaweighingplatformandthisequipmentis
tobeverified,ensurethattheapplicableregulationsregardingverificationareobserved.
– WhenconnectingSartoriusweighingplatforms,observethe“GuidetoVerificationofWeighingInstruments“andtheDeclarationofConformitywiththelistofpermittedweighingranges.
– Astickerwiththe“Sartorius“logowasaffixedtotheindicatorasacontrolsealfollowingverification.Thissealwillbeirreparablydamagedifyouattempttoremoveit.Thiswillnullifytheverification‘svalidity.Inthiscase,re-verificationwouldberequiredincompliancewithallrelevantnationalregulationsandlaws.
OperatingInstructionsCombicsCompleteScales 5
WarningsandSafetyPrecautions
DeviceDescriptionCombicscompletescales:– Arerobustanddurable,thankstotheirstainlesssteelhousing– Areeasytocleananddisinfect– Areeasytooperate,thankstothefollowingfeatures: – Large,backlit,fullygraphicaldot-matrixdisplay – Largekeyswithpositiveclickaction– Canbeoperatedindependentlyoftheweighingplatformlocation– Havearangeofinterfacesforflexibleuse– Haveoptionalpasswordprotectionforoperatingparameters
Combics3speedsupyourroutineprocedureswith:– Integratedprogramsforapplications(somecanbecombined): – Counting – NeutralMeasurement – Averaging(animalweighing) – Weighinginpercent – Checkweighing – Classification – Totalizing – Net-totalFormulation– Automaticinitializationwhenthescaleisswitchedon– Fastresponsetimes– Automatictaringwhenaloadisplacedontheweighingplatform– Designationofweightvalueswithupto4linesofalphanumerictext– Canbecontrolledviatwoexternalcomputersusingvariousprotocols– BarcodescannerconnectionoptionforenteringtarevalueorIDs(6units)– Possibilitytoinputtarevaluesviathenumberblock– LEDformeasurementrangeidentification– Connectionoptionforasecondweighingplatform– AlibiMemory– Internalrechargeablebattery– Productdatamemory– Configurableprintout– FlexPrint
Intended useTheCombics3isarobustcompletescalefordailyproductionandqualitycontrolinindustrialapplications.Anyotherusebeyondthisisconsideredimproper.
6 OperatingInstructionsCombicsCompleteScales
DeviceDescription
General View of the Equipment
Platform1 Levelindicator2 Loadplate3 Levelingfeet
Indicator4 10digitkeypadforenteringalphanumericvalues5 LEDs(forcheckweighingandclassification)6 Display(fordetails,see“OperatingDesign“chapter)7 Additionalfunctionkeys(see“OperatingDesign“)8 Generalfunctionkeys:Zero,Tare,Switchfunction,Adjustment/
Calibration,Print/Dataoutput(see“OperatingDesign“)
9 Togglebetweenweighingplatforms(WP)10On/Off
Rear view of indicator:11 “UNICOM“ Optional:
– RS-232|RS-485or422interface,e.g.for:– PCconnection– Printerconnection
– DigitalI/O– 4to20mA– ProfibusDP– EthernetTCP/IP|ModBusTCP
12RS-232interface“COM1“e.g.for:– PCconnection– Printerconnection– Digitalinput– Stoplightoutput
13“PS2“e.g.for:– Keyboardconnection– Barcodescannerconnection
14Powercordwithcountry-specificplug15Inputformenuaccessswitch(standardorlegal-for-trademode)
forWP116WeighingplatformWP1connection
foranalogscales,optionalfor“xBPI“|“SBI“scales
17WeighingplatformWP2connection,optionalforanalogscalesor“xBPI“|“SBI“scales
18Inputformenuaccessswitch(standardorlegal-for-trademode)forWP2
19RS-232interface“COM2“e.g.for:– PCconnection– Printerconnection
20Ventvalve:1.5Nm
OperatingInstructionsCombicsCompleteScales 7
DeviceDescription
CAW3S | CAH3
11
19
17181615
12
14
20
PS2
CAW3P
19
18
17
1615
11
14
12
13
10
1
2
34
5678
9
Installation
InstallationWhenaCombicsindicatorisorderedwithspecialequipment,thedesiredoptionscomepre-loadedfromthefactory.
Storage and Shipping Conditions 3 Oncetheequipmenthasbeenremovedfromthepackaging,itmayloseaccuracyif
subjectedtostrongvibration.
3
Iftheloadplateisliftedusingavacuumliftingpad,gloves,safetyshoesandsafetygearmustbeworn.Riskofinjury!Thisworkmayonlybecarriedoutbyreliableandauthorizedpersonnel.
3
Suspensionpointsareprovidedforweighingplatformswithanoverallsizeof1+1morlarger.Donotstepundertheloadduringweighingplatform/loadplatetransportorwhenlifting.Correspondingaccidentpreventionregulationsmustbefollowed.Donotdamagetheclampboxesandloadreceptorsduringtransport.
– Donotexposetheequipmenttounnecessarilyextremetemperatures,moisture,shocks,blowsorvibration.
– Permissiblestoragetemperature:–10°Cto+40°C
Installation LocationAvoidadverseinfluencesattheplaceofinstallation:– Extremetemperatures(operatingtemperature:–10°Cto+40°C)– Aggressivechemicalvapors– Extrememoisture(accordingtoIPprotectionclass)
UnpackingFor devices with a platform size of 60 x 80 cm or larger:
t Protectivegearmustbeworn(safetyshoesandifrequired,gloves)t Alwaysliftonthesidewallswhenliftingortransportingtheweighingplatform.
t Afterunpackingthedevice,checkitforanyvisibledamageasaresultofroughhandlingduringshipment.
y Ifyoudetectanydamage,proceedasdirectedinthechapterentitled“CareandMaintenance“under“SafetyInspection.“
t Savetheoriginalpackagingforanyfuturetransport.Unplugallconnectedcablesbeforepackingtheequipment.
Checking Package Contents– Indicator– Weighingplatform– Operatinginstructions– Options(specialaccessories)aslistedonthebillofdelivery
8 OperatingInstructionsCombicsCompleteScales
Installation
CAH3 models: Remove transport locks t Placetheweighingplatformatitsinstallationlocation,removethe
weighingpan.t Removethetransportlock:Removescrew1
t Loosenscrew2.t Turnthemountingbracket180°andre-securescrew2.
t Re-attachscrew1tothelever
3
Thetransportlockmustbere-installedbeforetransportingtheweighingplatform.
Leveling the Weighing PlatformTheweighingplatformmustbeexactlyleveltoensurereproducibleweighingresultseverytime.Therefore,theweighingplatformmustalwaysbere-leveledafterithasbeenmovedtoadifferentlocation.
t Removetheweighingpan.
t Loosenthelocknutsusingawrench(SW17).
t UseaSW5Allenkeytoscrewthelevelingfeetin/out.Turningthelevelingfeetclockwiseliftstheweighingplatform,turningthelevelingfeetcounterclockwiselowerstheweighingplatform.
OperatingInstructionsCombicsCompleteScales 9
Installation
10 OperatingInstructionsCombicsCompleteScales
t Aligntheweighingplatformlevelingfeetsothatairbubbleiscenteredwithinthecircleofthelevelindicator.
t Checktoensurethatallfourlevelingfeetrestsecurelyontheworksurface.y Eachofthelevelingfeetmustsupportanequalload.
t Re-fastenthelocknutsafterleveling:Smallplatforms(1measuringcell)countertotheplatformframe,largeplatforms(4measuringcells)countertotheplatformfoot.
t Placetheweighingpanonthescale.
Operating Limits Youshouldnotexceedthehighestloadforweighingplatforms.
Thehighestcapacityfortheweighingplatformisasfollowsdependingontheloadused(center,side,one-sidedcornerload):
Platform size Center Side Corner320+240 50 35 20
400+300 130 85 45
500+400 300 200 100
500+400P* 600 400 200
650+500S** 450 300 150
800+600P* 1200 800 400
800+600S** 900 600 300
800+800 4500 3000 1500
1000+800 4500 3000 1500
1000+1000 4500 3000 1500
1250+1000 4500 3000 1500
1500+1250 4500 3000 1500
1500+1500 4500 3000 1500
2000+1500 4500 3000 1500
*Steel **Stainlesssteel
For CAH* models Platform size Supported load (center) in kg 400+300 130 560+450 130 800+600 600
Shock ResistanceTheweighingplatformhasarobustdesign;however,fallingweighingsamples,sideimpactsandshocksshouldbeavoided.TheweighingplatformcanwithstandloadsspecifiedintheDINstandardIEC68Part2-27.
Notes on Planning Superstructures
3 Superstructuresmustbecompletelyattachedbeforetheweighingplatformisconnectedtothepower.
Theweighingplatformisdesignedforsystemintegration.Scaledrawingsarethebasisfortheselectionoftherequiredsuperstructures.ThefixingofmodelCAH*IG*weighingplatformsshouldbecarriedoutusingtheYAS04ISfasteningkit.Movingorrotatingpartsontheweighingpanmustbedesignedsothattheweighingresultsarenotinfluenced.Rotatingpartsshouldbecounterbalanced,forexample.Theweighingpanmustbefreeonallsidessothatthereisnoconnectionbetweentheweighingplatformandfixedpartsduetofallingpartsordirt.Cablesandhosesbetweentheweighingplatformandotherdevicesmaynotexertanyforcesontheweighingplatform.Thesecablesmaynottouchtheweighingpan.Whensettingupsystemsinhazardousareas(Zone2or22),anyrelevantspecificationsshouldbeobserved,e.g.:EN60079-14.Thedesignshouldensurethatmovingpartsdonotcauseelectrostaticdischarges(e.g.rollerconveyors).
Preload Range (Zero Set Range)Theweightofthesuperstructuresthatareattachedtotheweighingplatformisdesignatedasa“preload.“Thepreloadiselectronicallycompensatedforintheweighingplatformsothatthefullweighingrangeremainsavailableandthuszeroingand/oradjustment(withexternalweights)ispossible.Greaterpreloadsreducetheweighingcapacity.Youmaynotfallbelowthefollowingweighingrangevalues:–ForCAH*E-16ED...andCAH*E-32ED...amin.20kgweighingrangemustbe
maintained–ForCAH*E-64ED...andCAH*G-64FE...amin.35kgweighingrangemustbe
maintained–ForCAH*G-150IG-HandCAH*G-300IG-Hamin.60kgweighingrangemustbe
maintained
Thepreloadmustalwaysbesetbeforeverification.
Acclimatizing the DeviceCondensationcanformonthesurfacesofacolddevicewhenitisbroughtintoasubstantiallywarmerarea.t Allowthedevicetoacclimatizeforabout2hoursatroomtemperature,leaving
itunpluggedfromACpower.
Installation
OperatingInstructionsCombicsCompleteScales 11
GettingStarted Steps 1.) Setuptheweighingplatformwiththeindicator.
2.) Leveltheweighingplatform3.) Connectperipheraldevices,e.g.printertotheCOM1orUNICOMinterface:
seeDataInterfaceschapterstartingonpage994.) ConnectingthedevicetoACpower5.) Carryoutanalignment:foradjustment,seepage27,forlinearizationseepage24
Connecting Peripheral Devices or Another Weighing PlatformAnanalogSartoriusplatform(CAPP,CAPS)oranISweighingplatformisconnectedatthefactorytotheCombicsindicatorWP1input.
3
TheloadcellshouldbeconnectedbyacertifiedtechnicianwhohasreceivedspecializedtrainingfromSartorius.Anyinstallationworkthatdoesnotconformtotheinstructionsinthismanualresultsinforfeitureofallclaimsunderthemanufacturer’swarranty.
3
PeripheraldevicesshouldbeconnectedbyacertifiedtechnicianwhohasreceivedspecializedtrainingfromSartorius.Anyinstallationworkthatdoesnotconformtotheinstructionsinthismanualresultsinforfeitureofallclaimsunderthemanufacturer’swarranty.
3
Disconnecttheequipmentfromthepowersupplybeforestartingconnectionwork.
t Placecablesfromperipheraldevicesnexttotheindicator.
CAW3S, CAH3 (IP69K) t OpeningtheCombicsindicator: Loosenthetencapnutsonthefrontpanel.Removethefrontpanel.
Installing Connection and Interface Cables
3
Thecablegland(IP69Kprotection)ispre-mountedontheindicator.Pleaseuseextremecautionwhenperforminganyworkontheequipmentthataffectsthiscablegland.Youmustuseatorque wrench.Thetorqueforthiscableglandis5 Nm.
Preparing Cables
t Stripapprox.14cmfromtheendofthecable.t Shortentheshieldingtoapprox.2cmandpullbackovertheinsulation.t Stripapproximately5mmoftheinsulationfromthewiresoftheconnecting
cableandaffixferrulestothewireends.
GettingStarted
12 OperatingInstructionsCombicsCompleteScales
Attaching the Cable Entry
3
Pleaseuseextremecautionwhenperforminganyworkontheequipmentthataffectsthiscablegland.Youmustuseatorque wrench.Thetorqueforthiscableglandis5 Nm.
41 5
t Removetheprotectivecapfromtheboreholeontheindicator.t Inserttheincludedcableglandthroughtheboreholeandsecurefromtheinside
usingthelocknut(1).
2
3
t Insertthecablethroughthecableglanduntiltheshielding(2)comesintocontactwiththeclamps(3).Tightenthescrew-downnut(4)untilthegasket(5)insertedbetweenthescrew-downnutandcableformsasmallbeadedrim.
t Checktheshieldingandclamps.t Securelyconnectthewiresoftheconnectingcableinaccordancewiththe
terminalassignments.t Afteryouclosethehousingagain,useapressuregaugetochecktheintegrityof
theIP69Kprotection.Fordetails,contacttheSartoriusServiceCenter.
Connecting Cables t Insertallcablewiresthroughtheferritecase,windthemaroundtheferritecase
andthenreinsertbackthroughtheferritecase.t Screwthewirestightlyintotheclamps.
See the following pages for terminal pin allocation
t Refertothedatasheetoroperatinginstructionsoftheweighingplatformfordetailsontheassignmentofwirecolors/signals.Ensureanylinesthatarenotassignedareinsulatedcorrectly.
t Whenconnectingaloadreceptorthatuses4-conductortechnology(thecableoftheweighingplatformtobeconnectedonlyhas4lines),connectclamppairs1and2(EXC+undSENSE+),and5and6(SENSE-undEXC-)withawirejumper.
Connecting an IS Weighing Platform to a Combics 3YoucanconnectanISweighingplatformtoWP2.
Features – ISweighingplatformsprocessweighingdataindependentlyoftheindicator.– Internaladjustmentoption– IS...-0CEmodels:haveaseparateapprovalnumber,printedonatagthatis
affixedtothecable.– Pleaseobservetheconditionsdescribedinthemanualfortheweighingplatform
youconnect.
GettingStarted
OperatingInstructionsCombicsCompleteScales 13
14 OperatingInstructionsCombicsCompleteScales
GettingStarted
Connecting Peripheral Devices or a 2nd Weighing Platform: Combics 3, Model type CAW3S | CAH3
PS2 COM1 COM2 A8
KeypadLED + Display
Weighing platformInterface 2
Digital PCBCOM1, COM2 and PS2 terminal assignments (applies to all PCBs) PS21 LOAD_PRINTER 11 Cleartosend(CTS) 21 5Vswitched2 RESET_OUT 12 Dataterminalready(DTR) 22 PS/2_data3 GND 13 Datainput(RXD) 23 PS/2_clock4 GND 14 Dataoutput(TXD) 24 GND5 5V_OUT 15 GND COM26 5Vswitched 16 UniversalIn 31 CTS_COM27 GND 17 Controloutput:“lower“ 32 DTR_COM28 GND 18 Controloutput:“equal“ 33 RXD_COM29 n.c. 19 Controloutput:“heavier“ 34 TXD_COM210 LINE_OUT 20 Controloutput:“set“ 35 GND 36 GND
A8 terminal assignments1 EXC+ Bridgesupplyvoltage(+)2 SENSE+ Sense(+)forbridgesupplyvoltage3 OUT+ Measuringvoltagepositive4 OUT- Measuringvoltagenegative5 SENSE- Sense(-)forbridgesupplyvoltage6 EXC- Bridgesupplyvoltage(–)KeysLED + Display
A6/7
TastaturLED + Display
PS2 COM1 COM2 Interface PCB for RS-232/485 for IS weighing platform (option A6/A7)
A6/7 terminal assignments1 CTS 11 TxD/RxD+2 DTR 12 TxD/RxD-3 RxD 13 LINE_OUT4 TxD 14 LINE_OUT5 GND 15 GND6 AdjustmentLock 16 GNDKeysLED + Display
A20
KeypadLED + Display
PS2 COM1 COM2
Weighing platformInterface 1
Interface PCB for ADC 10.000e (option A20)A20 terminal assignments1 EXC+2 SENSE+3 OUT+4 OUT-5 SENSE-6 EXC-KeysLED + Display
A62/72
KeypadLED + Display
PS2 COM1 COM2
Weighing platformInterface 1
Interface PCB for RS-232/485 for IS weighing platform (option A62/A72)
Interface PCB A6/7 and A62/72
1 CTS 11 TxD/RxD+2 DTR 12 TxD/RxD-3 RxD 13 LINE_OUT4 TxD 14 LINE_OUT5 GND 15 GND6 AdjustmentLock 16 GNDKeysLED + Display
Interface Pin Assignment Chart COM1
Model type CAW3P (IP44 protection)
COM1femaleconnectors:25-pinD-Subminifemaleconnector(DB25S)withscrewlockhardwareforcablegland
Recommendedinterfaceconnector:25-pinD-Submini(DB25)withshieldedcableclampassemblyandshieldplate(Amptype826985-1C)andfasteningscrews(Amptype164868-1)
COM1 pin assignmentsPin 1: ShieldPin 2: Dataoutput(TxD)Pin 3: Datainput(RxD)Pin 4: GNOPin 5: Cleartosend(CTS)Pin 6: NotassignedPin 7: Internalground(GND)Pin 8: Internalground(GND)Pin 9: NotassignedPin 10: NotassignedPin 11: +12VforprinterPin 12: RES_OUT\Pin 13: +5VswitchPin 14: Internalground(GND)Pin 15: UniversalswitchPin 16: Controloutput:“lower“Pin 17: Controloutput:“equal“Pin 18: Controloutput:“heavier“Pin 19: Controloutput:“set“Pin 20: Dataterminalready(DTR)Pin 21: Groundpowersupply(GND)Pin 22: NotassignedPin 23: NotassignedPin 24: Powersupply+15..25V(peripherals)Pin 25: +5V
OperatingInstructionsCombicsCompleteScales 15
GettingStarted
Connecting a PC via Interface COM1UsethefollowingcablestoconnectaPCtotheindicatorinaccordancewiththeRS-232C/V24standard(max.cablelength15m):ModeltypeCAW3P: connectingcable7357312ModeltypeCAW3S|CAH3: connectingcableYCC02-D09F6
Pin assignmentPinassignmentsforthecablefromtheindicatortoanRS-232PCinterface(COM1).
Indicator side PC side
ModeltypeCAW3P DSUBconnector 25-pinD-Submaleconnector 9-pinor 25-pin 1 SgnGND 7 5GND 7 GND TxD 2 2RxD 3 RxD RxD 3 3TxD 2 TxD DTR 20 8CTS 5 CTS CTS 5 4DTR 20DTR ModeltypeCAW3S | CAH3 Opencableend DSUBconnector 9-pinor 25-pin
SgnGND 15 5GND 7 GND TxD 14 2RxD 3 RxD RxD 13 3TxD 2 TxD DTR 12 8CTS 5 CTS CTS 11 4DTR 20DTR
RS232
GettingStarted
16 OperatingInstructionsCombicsCompleteScales
Interface Pin Assignment Chart COM2
Model type CAW3P (IP44 protection) COM1femaleconnectors:25-pinD-Subminifemaleconnector(DB25S)withscrewlockhardwareforcablegland
65 1
9
Recommendedinterfaceconnector:25-pinD-Submini(DB25)withshieldedcableclampassemblyandshieldplate(Amptype826985-1C)andfasteningscrews(Amptype164868-1)
COM1 pin assignmentsPin 1: ShieldPin 2: Dataoutput(TxD)Pin 3: Datainput(RxD)Pin 4: GNOPin 5: Cleartosend(CTS)Pin 6: NotassignedPin 7: Internalground(GND)Pin 8: Internalground(GND)Pin 9: NotassignedPin 10: NotassignedPin 11: +12VforprinterPin 12: RES_OUT\Pin 13: +5VswitchPin 14: Internalground(GND)Pin 15: UniversalswitchPin 16: Controloutput:“lower“Pin 17: Controloutput:“equal“Pin 18: Controloutput:“heavier“Pin 19: Controloutput:“set“Pin 20: Dataterminalready(DTR)Pin 21: Groundpowersupply(GND)Pin 22: NotassignedPin 23: NotassignedPin 24: Powersupply+15..25V(peripherals)Pin 25: +5V
GettingStarted
OperatingInstructionsCombicsCompleteScales 17
Connecting a PC via Interface COM2UsethefollowingcablestoconnectaPCtotheindicatorinaccordancewiththeRS-232C/V24standard(max.cablelength15m):ModeltypeCAW3P: connectingcable7357312ModeltypeCAW3S|CAH3: connectingcableYCC02-D09F6
Pin assignmentPinassignmentsforthecablefromtheindicatortoanRS-232PCinterface(COM1).
Indicator side PC side
ModeltypeCAW3P DSUBconnector 25-pinD-Submaleconnector 9-pinor 25-pin 1 SgnGND 7 5GND 7 GND TxD 2 2RxD 3 RxD RxD 3 3TxD 2 TxD DTR 20 8CTS 5 CTS CTS 5 4DTR 20DTR ModeltypeCAW3S | CAH3 Opencableend DSUBconnector 9-pinor 25-pin
SgnGND 15 5GND 7 GND TxD 14 2RxD 3 RxD RxD 13 3TxD 2 TxD DTR 12 8CTS 5 CTS CTS 11 4DTR 20DTR
RS232
GettingStarted
18 OperatingInstructionsCombicsCompleteScales
31
42
6 5
Interface Pin Assignment Chart PS2 Model type CAISL (IP44 protection)
PS2 female connector:6-pinminiaturesocketPS2(Mini-DIN)
Recommended interface connector:6-pinminiaturesocketPS2withintegratedshieldedcableclampassembly
Pin assignment:Pin 1: Keyboarddata(datainterfacecable)Pin 2: NotassignedPin 3: Internalground(GND)Pin 4: +5VswitchedPin 5: KeyboardclockPin 6: Notused
Connecting a Bar Code Scanner AccessoryYBR02CISL
t DisconnecttheindicatorfromACpower(unplugtheACadapter)
For CAW3P models:t ConnectthebarcodescannerviaPS/2.
For CAW3S | CAH3 models:t Pinassignment,see“ConnectingPeripheralDevices“(implementedviathe
YCC02-BR02connectingcableorasoptionM8)onpage14.
NOTE:Thisequipmenthasbeentestedandfoundtocomplywiththelimitspur-suanttopart15ofFCCRules.Theselimitsaredesignedtoprovidereasonableprotectionagainstharmfulinterference.Thisequipmentgenerates,usesandcanradiateradiofrequencyenergyand,ifnotinstalledandusedinaccordancewiththeseinstructions,maycauseharmfulinterferencetoradiocommunications.Forinformationonthespecificlimitsandclassofthisequipment,pleaserefertotheDeclarationofConformity.Dependingontheparticularclass,youareeitherrequiredorrequestedtocorrecttheinterference.IfyouhaveaClassAdigitaldevice,youneedtocomplywiththeFCCstatementasfollows:“Operationofthisequipmentinaresidentialareaislikelytocauseharmfulinterferenceinwhichcasetheuserwillberequiredtocorrecttheinterferenceathisownexpense.“
GettingStarted
OperatingInstructionsCombicsCompleteScales 19
Closing the Combics Indicator t Re-attachthefrontpanelandsecureitwiththetencapnuts(1Nm).
Connecting the Device to AC PowerTheindicatorispoweredthroughthepre-installedpowercord.Thepowersupplyisintegratedintotheindicator.Thedevicecanbeoperatedwithasupplyvoltageof100Vto240V.
3 Thepowerconnectionmustbemadeinaccordancewiththeregulationsapplicableinyourcountry.
Theprintedvoltagerating(seetypelabel)mustmatchthevoltageintheplaceofinstallation.IfthevoltagespecifiedonthelabelortheplugdesignoftheACadapterdonotmatchtheratingorstandardyouuse,pleasecontactyourSartoriusofficeordealer.
t Checkthevoltageratingandplugdesign.t Thedevicemustbepluggedintoaproperlyinstalledwalloutlet.
Protection Class 1 Device t Thedevicemustbepluggedintoaproperlyinstalledwalloutletwhichhasa
protectivegroundingconductor(PE).
Safety Precautions
3 Ifyouuseanelectricaloutletthatdoesnothaveaprotectivegroundingconductor,
ensurethatanequivalentprotectiveconductorisinstalledbyacertifiedelectrician(asspecifiedintheapplicableregulationsforinstallationinyourcountry).Theprotectiveeffectmustnotbenegatedbyusinganextensioncordwithoutaprotectivegroundingconductor.
Beforeusingforthefirsttime,anysuperstructurepartsmustbecompletelyinstalled.Avoidconnectingtheequipmenttolinesthathaveaheavyelectricalload,e.g.compressors,largemachinery,etc.
Warm-up Time Todeliverexactresults,thedevicemustwarmupforatleast30minutesafter
connectiontoACpower.Onlyafterthistimewillthedevicehavereachedtherequiredoperatingtemperature.
Using a Verified Device in Legal Metrology Ensurethatthereisawarm-uptimeofatleast24hoursafterconnectiontothe
powersupply.
GettingStarted
20 OperatingInstructionsCombicsCompleteScales
ConfiguringWeighingPlatforms
Service-Mode Purpose TheServicemodeenablesaccesstoadditionalmenuitemsintheSetupmenu
whicharenotdisplayedwhentheServicemodeisnotactive.ThemostimportantcalibrationandadjustmentworkfortheindicatorandfortheconnectedweighingplatformcanbecarriedoutintheServicemenu,e.g.ADCconfiguration.
WhentheServicemodeisactive,an“S”isshowninthetopright-handcornerofthedisplay.TodeactivatetheServicemode,restarttheindicator(turntheindicatoroffandbackonagain).
Activating the Service Modet Pressetoturnonthedevice.y Whenturnedonthescaleisinanapplicationprogram.
t Entertheservicepassword(seeAppendixGeneralUserPassword)andpressMtoconfirm.
y ThedeviceinnowisServicemode.An“S“appearsinthetopright-handcornerofthedisplay.
t Pressthe“q“softkeyseveraltimestoselectthe“Device parameters“line.
t Pressthe“O“softkey.y The“Device“submenuwillopen.
t Selectandopenthecorrespondingsubmenu.Repeatthisprocedureuntilthedesiredmenuiteminthelowestmenulevelcanbeopened.
t Vieworchangethemenuitem(confirmwith“l“)anduse“o“toreturntothepreviousmenu.
t PressM or“oo“toexittheSetupmenu.
Exiting Service ModeTurnthedeviceoffandthenonagaintoreturntothenormalapplicationmode.IfyouexittheSetupmenuwithoutchangingsettingsbyconfirmingwithMorthe“oo“softkey,theServicemodewillremainactive.PresstheMkeytore-opentheSetupmenu.
OperatingInstructionsCombicsCompleteScales 21
ConfiguringWeighingPlatforms
Overview of the Setup Menu in Service Modeo=Factorysettingx=User-definedsetting
Servicepasswordentry Setup Applicationparameters,pleaserefertothe“BasicApplicationPrograms”manual Fnkey“SetupOverview(Parameters)“ Deviceparameters Info,seethe“SetupOverview(Parameters)“section Language,seethe“SetupOverview(Parameters)“section
Setupaccesswithservicepassword
Deviceparameters WP1 RS-2321) SBIstandard SBIverifiable oIS-232 ADC-232
RS-4851) oIS-485 ADC-485
Internal ADCconfiguration(seethe“SetupMenuforADCConfiguration“section) Calibration/Adjustment CALkeyfunction oExt.cal./adj.;factory-def.wt. Ext.cal./adjust.;user-definedweight Ext.lineariz.;factory-def.wts Ext.lineariz.;user-def.wts Setpreload Deletepreload Keyblocked
Cal./adj.sequence Cal.thenautoadjust oCal.thenmanualadjust
isoCALfunction3) oOff Adjustmentprompt
Activateexternaladjustment2) oActivated Deactivated
Parameterforexternalweight Cal./adj.weight: Lin.weight1...4:
Adjustwithoutweights2) Inputparameters Nominalload: Resolution: Sensitivity1…4: Saveparameters Yes oNo
Geographicaldata2) Inputparameters Geographicallatitude Altitude Gravitationalacceleration Saveparameters Yes oNo
1)Equipmentversion:–thenblockedinternally2)Notavailableondevicesverifiedforuseinlegalmetrology3)OnlywhenoperatedwithSartoriusISweighingplatformsoranexternalADC
22 OperatingInstructionsCombicsCompleteScales
ConfiguringWeighingPlatforms
DeviceParameters WP1 Internal Calibration/Adjustmentunit Grams/g Kilograms/kg Tons/t oPounds/lb
Menuitems“Adaptfilter“-“Factorysettings:onlybal.func,“ seethe“SetupOverview(Parameters)“section
Off COM-1(whentheWPisassignedtothisinterface) COM-2(whentheWPisassignedtothisinterface) UNICOM(onlyifavailable)
WP2,seethe“SetupOverview(Parameters)“section RS-2321)similarto“Internal“menuforWP1 RS-4851)similarto“Internal“menuforWP1 oOff COM-1similartoWP1 COM-2similartoWP1
COM-1,seethe“SetupOverview(Parameters)“section
COM-2,seethe“SetupOverview(Parameters)“section
“ControlI/Oports“-“Terminaldata,“seethe“SetupOverview(Parameters)“section
SQmin SQmininput SQminWP1 SQminWP1 0.000kg SQminWP2 SQminWP2 0.000kg SQminWP3 SQminWP3 0.000kg Display No oYes GMPprint oNo Yes
Alibimemory2) Clearalibimemory Yes oNo Alibimemoryperiod Indays 90
1)Equipmentversion:–thensavedinternally2)Onlyifalibimemoryisavailable(option)
OperatingInstructionsCombicsCompleteScales 23
ConfiguringWeighingPlatforms
Setup Menu for A/D Converter Configuration
SetupaccessinServicemode
WP1–Internal–ADCconfiguration
Standardconfiguration Ranges Single-rangemode Scaleintervald Max.cap.
Multi-intervalmode Scaleintervald Range1 Range2 Range3 Max.cap.
Multiple-range Scaleintervald mode Range1 Range2 Range3 Max.cap.
Availableunits User-definable/o Grams/g Kilograms/kg Carats/ct ...
Saveparameters Yes oNo
oVerifiable Accuracy ClassIII/IIII configuration class Ranges Single-rangemode D: E: Min.capacity: Max.cap.:
Multi-intervalmode D: E: Min.capacity: Range1: Range2 Range3: Max.cap.:
Multi-intervalmode D: E: Min.capacity: Range1: Range2 Range3: Max.cap.:
Availableunits User-definable/o oGrams/g oKilograms/kg ...
Saveparameters Yes oNo
24 OperatingInstructionsCombicsCompleteScales
ConfiguringWeighingPlatforms
Analog/Digital Converter (ADC) Purpose Adjusttheparametersoftheanalog/digitalconvertertotheconnectedloadcellor
weighingplatform.AfterADCconfiguration,theADCinconnectionwiththeloadsensorisdefinedasascale.
3
OncetheADCconfigurationhasbeenlocked,theindicatorcannolongerbeusedtoinfluenceweighingresults.ThescopeoffunctionsavailableintheweighinginstrumentisdefinedbytheA/Dconverter.Weighingfunctionsthatcanbeactivatedincludereadingweightvalues,taring,adjustment,readingthetarevalue,saving/deletingthetareentry.
Setup Information – ADCconfigurationisonlypossiblewhenthemenuaccessswitchisopen.Re-closethemenuaccessswitchafterADCconfiguration.
– BeforeADCconfiguration,youmustfirstsetwhetherornottheweighingplatformwillbeusedasastandardorverifiableweighingplatform.
– ADCconfigurationiscarriedoutintheServicemodeintheSetupmenuunder“WP1“forthefirstweighingplatformand“WP2“forthesecond.
– EntriesmadeinADCconfigurationwillnotbeaffectedbyamenureset(returningthesetupparameterstotheirfactorysettings).
Seealsotheoverviewinthe“SetupMenuforA/DConverterConfiguration“section.
Setting Parameters for ADC Configuration Standard or Verifiable Configurations InADCconfiguration,youmustfirstselectwhethertheweighingplatformshould
beconfiguredasastandardorverifiable(foruseinlegalmetrology)weighingplatform.
– Standardconfiguration“Standard“ – Verifiableconfiguration“Verifi able“
Selectusingthe“Q“or“q“softkey.Pressthe“O“softkeytoconfirmthesettingandopentheConfigurationmenu.
Accuracy Class ThismenuitemisnotshownwhentheStandardconfigurationisactive.WhentheVerifiableconfigurationisactive(forweighingplatformsverifiedorverifiableforuseinlegalmetrology),onlyClassl/mcanbeselected.Activatethe“Accuracy class“menuitem,select“Class III/IIII“andconfirmyourselectionusingthe“l“softkey.
Ranges Thecapacityoftheweighingplatformcanbedividedintomultipleranges:
– “Single-range mode“:Theentireweighingrangeisdividedintoscaleintervalsonthebasisofthelowestintervaldandthemaximumload.
– “Multi-interval mode“:The“Multi-intervalmode”functiondividestheweighingcapacityintoasmanyasfourranges,eachwithadifferentreadability.Correspondingchangestakeplaceautomatically.Oncethescalehasbeentared,thehighestpossibleresolutionisavailableeveniftheweighingplatformisloadedwithahigherweight.Thisisonlypermittedintheaccuracyclassesl/mfortheverifiableconfiguration.
– “Multiple-range mode“:Multiple-rangemodehastwoorthreeweighingranges.Whentherangelimitisexceeded,thescaleswitchesintothenexthighestweighingrange(lowerresolution)andremainsthere.Thescalecanbereturnedtothelowerweighingrange(higherresolution)onlybypressingthe(keyandthenunloadingthescale.
OperatingInstructionsCombicsCompleteScales 25
ConfiguringWeighingPlatforms
Selectthedesiredconfigurationusingthe“Q“or“q“softkey.Confirmyourselectionusingthe“O“key.Makeadditionalsettingsinthesubmenu:scaleintervald/verificationscaleintervale,minimumload(Verifiableconfigurationonly),rangelimits(Multi-intervalorMultiplerangemodeonly)andmaximumcapacity.Confirmusingthe“l“softkeyorcancelusing“Esc.“
Scale Interval d Scaleintervaldindicatestheresolutionoftheweighinginstrument.Thescaleintervaldcanbeenteredonlyinincrementsof1,2,5,10,20,etc.
Whenusingverifiableorverifiedweighingplatforms,thescaleintervaldisthesameastheverificationscaleintervale.
Verification Scale Interval e Theverificationscaleintervaleindicatestheresolutionoftheweighinginstrumentinlegalmetrology.Theverificationscaleintervalecanbeenteredonlyinincrementsof1,2,5,10,20,etc.Forweighinginstrumentsofaccuracyclasslorm,e=d.Thisiswhythescaleintervalddoesnotneedtobeenteredseparately.
When“Standardconfiguration”isused,thismenuitemisnotdisplayed.
Minimum Capacity (Min. Cap.) When“Standardconfiguration”isused,thismenuitemisnotdisplayed.Theminimumloadoftheconnectedweighingplatformisenteredunderthismenuitem.
Theminimumloadforscalesofaccuracyclasslis20eand10eforclassm.
Important Note: Thefunctionoftheminimumloadsettingistowarnoperatorsthatbelowthislimit,thesummationoftolerancesmightleadtosignificantmeasurementerrors.InGermany,forexample,initialweightsbelowtheminimumloadarenotallowed.
Maximum Capacity (Max. Cap.) Themaximumcapacityisthemaximumloadthatmaybeplacedontheweighinginstrument.Whenheavierweightsareusedtheweighinginstrumentdisplaysoverload“H.”Thescaleintervalsoftheweighinginstrumentarecalculatedusingthemaximumloadandthescaleintervald(e.g.max.capacity=15.000kg,smallestscaleintervald=0.005kgyields3000scaleintervals).
Inlegalmetrologythetotalnumberofintervalsmustbenomorethan3000e,andwhenusingmulti-intervalscalestheremustnotbemorethan3000eintervalsperrange.
Instandardoperation,asopposedtolegalmetrology,youcandefinea“SuperRange”weighinginstrumentofover3000intervals.Theseparameters,however,maybeinfluencedbyphysicalrestrictions.
Range 1, Range 2, Range 3 Therangelimitsareenteredfortheindividualranges.Theaccuracychangeswhentheselimitsareexceeded.Thefollowingapplieswhenenteringlimits:range1<range2<range3<maximumcapacity.
Thismeansthattheweighingrangecanbedividedintoamaximumof4ranges.Theresolutionchangesatintervalsof1,2,5,10,20etc.,wherethelowestresolutionisthesmallestscaleintervalentered.Setrangesthatarenotrequiredforusetozero.
Available Units Withthisfunction,youcanmakeparticularweightunits(weightunitx,x=1,2)inaccessibleduringweighing.Availableunitsareindicatedbya*onthedisplay(morethanonecanbeselected).
Toenableordisableaunit,selecttheunitbypressingthe“Q“or“q“softkey,andthenpressthe“l“softkey(togglefunction).
Saving Parameters TosavetheADCconfiguration,usethe“O“softkeytoselect“Yes“andconfirmwiththe“l“softkey.Thedevicesoftwareisreset,andthescalereturnstothenormalweighingmode.Toexitthemenuwithoutsavingconfigurationchanges,pressthe“o“softkey.
Oncetheseparametershavebeenconfigured,theA/Dconverterinconjunctionwiththeloadcell(s)isdefinedasaweighinginstrument.TheA/Dconverter,inconjunc-tionwiththeweighingplatform,cannowbeusedlikeanystandardweighingplatform.Inaddition,theweightunitmustbedefinedandtheweighingplatformadjusted(calibration,adjustmentandlinearizationmustbeperformed).Foradetaileddescriptionoftheseprocedures,seethe“AdjustmentinServiceMode“section.
26 OperatingInstructionsCombicsCompleteScales
ConfiguringWeighingPlatforms
Analog/Digital Converter (ADC) Configuration
Condition Theweighingplatformmustalreadybeconnected.
Open the Menu Access Switch Themenuaccessswitchislocatedonthebackoftheindicatorrightnexttotheweighingplatformconnection.t Removethecap.t Slidetheswitchtotheleft(=“open“position).
Activating the Service Mode t See“ServiceMode“onpage17.
Configuration t Selectweighingplatform“WP 1.“ t Ifthe“Internal“settingisnotalreadyactivated(markedby“o“),select
thesettingusingthe“Q“or“q“softkeyandconfirmwith“O.“ y Themessage“Function active“appearsbriefly.The“WP1internal“
menuwillthenopen.
t OpentheADC Confi gurationmenu. t Selectthedesiredconfigurationdatarecordusingthe“Q“or“q“softkey:
“Standard“or“Verifi able“(verifiableconfiguration).Thedefaultsettingdependsonthedatarecord.
t OpenthemenuforconfiguringA/Dconverterparameters.Inthisexample,themenuforADCconfigurationofaweighingplatformforuseinlegalmetrologyisopened.If“Standard“wasselectedpreviously,thenthe“Accuracy class“isnotdisplayed.
t Openthefirstmenuitem.Forastandardconfiguration,the“Ranges“menuitem,foraverifiableconfiguration,the“Accuracy class“menuitem.
Whenthe“Verifiable”configurationisactive,alwaysselectthe“Accuracy class“menuitemfirst.
t Setaccuracyclassl/m.The“o“symbolshouldmarkthesetting,ifrequiredconfirmusingthe“l“softkey.
t Pressthe“o“softkeytoexitthemenuitem. t Openthe“Ranges“menuitem.
OperatingInstructionsCombicsCompleteScales 27
ConfiguringWeighingPlatforms
Intheexampleshownhere,“Single range mode“hasbeenselected(markedby“o“).
t Toselectadifferentweighingrangeconfiguration,usethe“Q“or“q“softkeytoselectthecorrespondinglineandopentheselectedmenuusingthe“O“softkey.
y Theselectedweighingrangeconfigurationisnowactive.Whenyoureturnfromtheinputmenuforenteringtheweighingrangeparameters,thenewrangeconfigurationismarkedbya“o.“
Formoreinformationaboutrangeconfiguration,pleasesee“SettingParametersforADCConfiguration.“
Thedefaultvaluesdisplayeddependonthedatarecordloadedandmighthavetobechanged.Intheexampleshownhere,theA/Dconfigurationissetwitha“Verifiable”datarecordinsingle-rangemode.
Single-range Mode t Selecttheindividualinputfieldsusingthe“Q“or“q“softkey. t Fornumericinput:usethe0...9keysandthe.key(decimalpoint).
Makecorrectionsusingc. t Confirmusingthe“l“softkey.
Ifotherparametersfollowtheonejustentered,thehighlightbarisautomaticallypositionedonthenextinputfield.Tocancelnumbersentered:pressthe“ESC“softkey.
t Usethe“o“softkeytogotothenextmenulevel. y Thiswillapplyallparameters. t PressM or“oo“toexittheSetupmenu.
0.002 Intheexampleshownhere,asingle-rangescalein“Verifiable”configurationwithamaximumcapacityof6.000kgismodified;theverificationscaleintervaleischangedfrom0.001kgto0.002kg,inaccordancewiththemaximumpermittedvalueof3000verificationscaleintervals.Pressthe“l“softkeytoconfirmthechangedvalue.Thehighlightbarisautomaticallypositionedonthe“Min. cap.“field.
Thefollowingvaluesapplyfortheminimumloadforverifiablescales: – Forclassl:Min.cap.=20e – Forclassm:Min.cap.=10e
Averificationscaleintervalthatischanged,therefore,alsoaffectstheminimumload.Changingtheverificationscaleinterval“e“isautomaticallyappliedtothe“Min.cap.“
Youcanalsochangethisvaluemanually: Intheexample,theminimumcapacitymustbeincreasedto0.04kgforclassl. t Pressthefollowingkeysinsequence:0.040andconfirmusing
the“l.“ y Thehighlightbarisautomaticallypositionedonthe“Max. cap.“field.
t Thevalueforthemaximumcapacityisnotchanged.Forthisexample,theinputofparametersforsingle-rangemodeinthe“Verifiable”configurationisnowconcluded.
t Usethe“o“softkeytogotothenextmenulevel.
28 OperatingInstructionsCombicsCompleteScales
ConfiguringWeighingPlatforms
Multi-interval Mode Theillustrationshowsanexampleoftheinputmenuopenedformulti-intervalmoderangeconfiguration.Thisexampleshowstheparametersforascalein“Verifiable”configuration,with2weighingrangesandamaximumcapacityof6.000kg.
– Range1:0…3.000kgwithe1=0.001kg– Range2:3.002…6.000kgwithe2=0.002kg
t EntertheverificationscaleintervalforRange1inthe“E“inputfield.Theminimumcapacityforaclasslscalemustbesetto0.02kg.
t Usethe“o“softkeytogotothenextmenulevel.y Theactiverangeconfigurationismarkedwith“o.“
t Usethe“o“softkeytogobacktothe“Verifi able“menu.
Selecting Units t Usethe“q“and“O“softkeytoopenthe“Available units“menuitem.
Thismenuletsyouenableordisabletheweightunitsavailableunder“Weightunit1,““Weightunit2“and“Weightunit3.“
t Selecttherespectiveunitusingthe“Q“or“q“softkeyandconfirmusingthe“l“softkey.
Inmostcases,youwillnotneedtochangedefinedvalues.Availableweightunitsaremarkedbya*.
Theweightunitusedforconfigurationofweighingrangescannotbeblocked.
t Usethe“o“softkeytogobacktothe“Internal“menu.
t Usethe“q“and“O“softkeytoopenthe“Calibration/adjustment“menu.
t Usethe“q“and“O“softkeytoopenthe“Calibration/adjustment unit“menuitemtodefinetheweightunitforcalibrationandadjustment.Inmostcases,youwillnotneedtochangedefinedvalues.
y Allunitsaredisplayedinthemenuthatareactivatedin“Available units.“Thecurrentsettingismarkedbya“o.“
OperatingInstructionsCombicsCompleteScales 29
ConfiguringWeighingPlatforms
t Tochangethecalibration/adjustmentunit,selecttheunitusingthe“Q“or“q“softkeyandconfirmusingthe“l“softkey.
t Usethe“o“softkeytogobacktothe“Internal“menu.t Usethe“Q“softkeytoselectthe“ADC confi guration“menuitem.
t Usethe“O“and“q“softkeytoselectthe“Save confi guration data“menuitem.
t Tosavetheconfiguration,usethe“Q“softkeytoselect“Yes“andconfirmusingthe“l“softkey.
y Themessage“Function activated“appearsbriefly.Theprogramthenreturnsautomaticallytotheregularweighingmode.
Tonotsavetheconfiguration:t Pressthe“o“softkeytoexitthemenu.y Theprogramreturnstothenexthighermenulevel.
Tonotsavedata:t Pressthe“o“softkey.TheprogramreturnstotheWP1:Internal.t Slidethemenuaccessswitchtotheright(=“closed“position)andreattachthe
cap.y Thedeviceisnowinnormalweighingmode.
h OnceADCconfigurationhasbeencompleted,anadjustmentoftheweighingplatform(calibration/adjustmentandlinearization)mustbecarriedout(see“Calibration/AdjustmentwithoutWeights“and“ExternalLinearization“).
30 OperatingInstructionsCombicsCompleteScales
ConfiguringWeighingPlatforms
Thedisplaysdepictedinthenexttwoillustrationsontheleftshowdatafromamulti-intervalscaleconfiguredasdescribedabove,orasimilarlyconfiguredmultiple-rangescale.
IftheA/Dconverterwasconfiguredwitha“Verifiable”datarecord,thelinesfordisplayofmetrologicaldata(lines1and2)showthedatavalidforuseinlegalmetrology.
Thecurrentrange(e.g.R1)isdisplayedtopleftundertheweighingpointformultiple-rangescales.
ADC Configuration with Load Cell(s) Connected
Procedure: 1. Openthemenuaccessswitch,see“Analog/DigitalConverter(ADC)Configuration.“
2. ActivatetheServicemode,see“ServiceMode.“
3. ConfigureWP1,see“Analog/DigitalConverter(ADC)Configuration.“
4. Setsingle-rangemode,forexample,see“Analog/DigitalConverter(ADC)Configuration.“
5. Selecttheunits,see“Analog/DigitalConverter(ADC)Configuration.“
6. Adjustwithoutweights,see“Adjustwithoutweights.“
7. Set/Deletethepreload,see“SettingthePreload“and“DeletingthePreload.“
OperatingInstructionsCombicsCompleteScales 31
ConfiguringWeighingPlatforms
Entering Geographical Data for Use in Legal Metrology Purpose Enteringgeographicaldataallowstheexternaladjustmentofweighingequipment
ataplace(e.g.atthemanufacturerorvendor‘splaceofbusiness)thatisnotthesameastheplaceofinstallation.Iftheweighingequipmentisadjustedattheplaceofinstallation,itisnotnecessarytoentergeographicaldata.Thesensitivityofweighingequipmentchangesdependingontheplaceofinstallationasitisdependentontheon-sitegravitationalforce–or,moreprecisely,ongravitationalacceleration.Savinggeographicaldatamakesitpossibletochangetheplaceofinstallationoftheweighingequipmentafterexternaladjustmenthasbeencarriedout.Theadjustmentofweighingequipmentisvalidattheplaceofinstallationandwithinaspecifictolerancezone.At3000ethiszoneextends±100kmfromthesetgeographicallatitudeand±200mfromthesetelevationabovesealevel.
Installation Location in Germany Anexceptiontothisisthesettingfor“Germany(ZoneD):”IfduringexternaladjustmentofweighingequipmentwithinGermanythegeographicaldata– Geographicallatitude:51.00degrees– 513melevationabovesealevelareentered,theweighingequipmentcanbeusedthroughoutGermany.Gravitationalaccelerationfor“Germany(ZoneD)”is9.810m/s2.Ondeliverythegeographicaldatafor“Germany(ZoneD)”areenteredintheoutputdevice.
Itisrecommendedtousethegeographicaldatasettingsfor“Germany(ZoneD)”whenadjustinganddeliveringtheweighingequipmentwithinGermany.
Enteringexactgeographicaldatawillleadtoahigherlevelofaccuracybutwillalsorestrictthetolerancezone.
Setup Information – Itisonlypossibletoentergeographicaldatawhenthemenuaccessswitchisopen.
– WhentheServicemodeisactive,geographicaldatacanbeenteredintheSetupmenuunder“WP 1“forthefirstweighingplatformand“WP 2“forthesecond.Settingsaremadeinthe“Calibration/adjustment: Geographical data: Input parameters“menu.
– Youcanentereitherthe“latitude“(geographicallatitudeindegrees)and“altitude“(elevationinmabovesealevel)orthevalueforgravitationalacceleration“gravity.“
Gravitationalaccelerationtakesprecedenceoverthegeographicallatitudeandelevationofthelocation:Ifithasbeenentered,inputfieldsforlatitudeandelevationshowthevalues“99999.99“and“9999999“respectively.Ifonlyelevationandlatitudehavebeenentered,“0000000“isdisplayedforgravitationalacceleration.
h Thenmakesurethatthegeographicaldatafortheadjustmentlocationhasbeenenteredcorrectly.Ifnoexternaladjustmentiscarriedout,enterthedatafortheinstallationlocation.ThedatacanbeobtainedfromtherelevantlandregistryorOrdnanceSurvey.
32 OperatingInstructionsCombicsCompleteScales
ConfiguringWeighingPlatforms
Procedure t Removethecap.t Slidethemenuaccessswitchtotheleft(=“open“position). Ifthedeviceispartofaverifiedweighingfacility,thiswillonlybepossibleif
theverificationsealisbroken.Theweighingequipmentmustthenbeverifiedagain.
t ActivatetheServicemode,see“ServiceMode.“ t Selectweighingplatform“WP 1“inthe“Device Parameters“
menuitem.t Ifthe“Internal“settingisnotalreadyactivated(markedby“o“),select
thesettingusingthe“Q“or“q“softkeyandconfirmwith“O.“
y Themenuforthe“WP-1 INTERNAL“deviceparametersisdisplayed.t Usethe“Q“or“q“softkeytoselectandopenthe“CaCalibration/
adjustment“menuusing“O.“
t Usethe“Q“or“q“softkeytoselectanduse“O“toopenthe“Geographical data“menu.
t Usethe“O“softkeytoconfirm“Input parameters.“
Entering Geographical Latitude and Elevationt Usethe“Q“or“q“softkeytoselectthecorrespondinginputfield.t Enterthenumberviathekeypadandconfirmusingthe“l“softkey.y Thenextinputfieldisselected.
Inthisexample,thegeographicaldataareenteredfortherespectiveplatformasavaluepair“Latitude“and“Altitude.“Afterthisdatawassavedandthescalereturnedtoweighingmode,thispairofvaluesisdisplayedagainthenexttimethedisplaymenuisopened.Theinputfieldforgravitationalaccelerationisempty.
Inthisexample,thevalueforgravitationalaccelerationisenteredfortheplaceofinstallation.Thefields“Latitude“and“Altitude“areinvalid.Thesetvalueisthenre-displayedafteritissavedandtheinputmenuisre-opened.IfyouexittheSetupmenuandthenopentheServicemode,thesetvalueforgravityisnolongerdisplayed.
OperatingInstructionsCombicsCompleteScales 33
ConfiguringWeighingPlatforms
Entering Gravity t Usethe“Q“or“q“softkeytoselectthecorrespondinginputfield.
t Entergravityinm/s2viathekeypadandconfirmusingthe“l“softkey.Permissiblevaluerange:9.700000d<gravity2d<9.900000Intheexampleshownhere,thevalueforgravityhasbeenchanged.Thenewvalue,9.810000m/s2appliestothesetting“Germany(ZoneD).”
t Pressthe“o“softkeytoexittheInputmenu.
t Usethe“Q“softkeytoselectthe“Save parameters“menuitem.
t Usethe“Q“softkeytoselect“Yes“andusethe“l“softkeytoconfirm.y Themessage“Data stored“appearsbriefly.
Theprogramthenreturnstothe“No“displaystatus.t PressM or“oo“toexittheSetupmenu.t Slidethemenuaccessswitchtotheright(=“closed“position)andreattachthe
cap.y Thedisplaygoesoutandthedevicerestarts.Thenweighingmodeisactive.
Adjusting Scales in Operating ModeSeealso“CalibrationandAdjustment“inthechaptercalled“Operation“t OpentheDeviceparametersmenufortherespectiveweighingplatform,
(e.g.“WP 1:INTERNAL“).– Openthe“Calibration/adjustment“submenu.– „CAL key function“menuitem:
Setting“Ext. cal./adj.: factory-def. wt.“(factorysetting).
– „Cal/adj. sequence“menuitem:Setting“Cal. then manual adj.“(factorysetting).
– „Activate ext. adj.“menuitem(notforaverifiableconfiguration):Setting“Activated“(factorysetting).
TodisplaygeographicaldataintheDeviceparametersmenu,openthe“Operating parameters“submenu.Menuitem“Display geogr. data>On“.
t Press(tounloadthescale.
34 OperatingInstructionsCombicsCompleteScales
ConfiguringWeighingPlatforms
t PressJtostartanexternaladjustment.
C.EXT.DC.EXT.DEF.
y Thedisplay“C.EXT.D“appearsbriefly.Intheexample,thealtitudeandlatitudeoftheinstallationlocationarebeingentered.
AltitudC.EXT.DEF.
y Thedisplay“Altitud“appearsbriefly.
y Thealtitudeattheplaceofinstallationisdisplayedinmetersabovesealevel-here,thealtitudefor“Germany(ZoneD).”
t PressJtoconfirmthedisplayedvalueorpress(tocanceltheadjustment.
LatitudC.EXT.DEF.
y Thedisplay“Latitud“appearsbriefly.
y Thegeographicallatitudeoftheplaceofinstallationisshownindegreesnorthordegreessouth-herethelatitudesettingfor“Germany(ZoneD).”
t PressJtoconfirmthedisplayedvalueorpress(tocanceltheadjustment.
y Youarepromptedtoplacetherequiredweightontheplatform(e.g.:5.0kg).Thesubsequentstepsforcompletingthecalibration/adjustmentaredescribedinthechapterentitled“Operation”under“CalibrationandAdjustment.”
OperatingInstructionsCombicsCompleteScales 35
ConfiguringWeighingPlatforms
Ifgravityisbeingenteredinsteadofaltitudeandlatitude,then“Gravity“isdisplayedforabrieftimeafter“CAL.“
Theenteredvalueappearsinm/s2,hereforthe“Germany(ZoneD)“setting.t PressJtoconfirmthedisplayedvalueorpress(tocanceltheadjustment.
y Youarepromptedtoplacetherequiredweightontheplatform(e.g.:5.0kg).Thesubsequentstepsforcompletingthecalibration/adjustmentaredescribedinthechapterentitled“Operation”under“CalibrationandAdjustment.“
t Slidethemenuaccessswitchtotheright(=“closed“position)andreattachthecap.
y Thedisplaygoesoutandthedevicerestarts.Thenweighingmodeisactive.
Ifadjustmentiscarriedoutusingaverifiableconfigurationdatarecord,thelinesfordisplayofmetrologicaldata(lines1and2)showthedatavalidforuseinlegalmetrology,ifthemenuaccessswitchisclosed.Seealsothechapter“Operation“,“ConfigurationforUseinLegalMetrology.“
36 OperatingInstructionsCombicsCompleteScales
ConfiguringWeighingPlatforms
Entering Adjustment and Linearization Weights
Purpose Enteringadjustmentandlinearizationweights.
Procedure Seealso“CalibrationandAdjustment“inthechaptercalled“Operation“.
t Removethecap.t Slidethemenuaccessswitchtotheleft(=“open“position).t ActivatetheServicemode,see“ServiceMode.“
t Selectweighingplatform“WP 1“inthe“Device Parameters“menuitem.
t Ifthe“Internal“settingisnotalreadyactivated(markedby“o“),selectthesettingusingthe“Q“or“q“softkeyandconfirmwith“O.“
y Themenuforthe“WP-1 INTERNAL“deviceparametersisdisplayed.
t Usethe“Q“or“q“softkeytoselectandopenthe“Calibration/adjustment“menuusing“O.“
t Usethe“Q“or“q“softkeytoselectanduse“O“toopenthe“Parame-ter for external weight“menu.
t Thefirstmenuitem“Cal/adj. wt.:“(forselectingtheuser-definedcalibrationweight),isalsoaccessiblewithoutactivatingtheServicemode.Thevaluesforthelinearizationweights“Lin.-wt. 1“to“Lin.-wt. 4“can,however,onlybechangedintheServicemode.
y Thecurrentvaluesfortheuser-definedcalibrationweightandthe4linearizationweightsaredisplayed.Inthisexample,thevaluefortheexternal,user-definedadjustmentweightischangedto6.000kg.
t Press6.000andconfirmwiththe“l“softkey. y The“Lin.-wt. 1“inputfieldisselected.
Inthisexample,thevalueforlinearizationweight1ischangedto1.500kg.t Press1.500andconfirmwiththe“l“softkey.y The“Lin.-wt. 2“inputfieldisselected.
t Enterorchangealllinearizationweightsinsequenceasneeded.Ifyoudonotrequirealllinearizationpositions,enter“0.000“intheunusedfieldstohidetheselinesinthedisplay.Confirmwiththe“l“softkeyaftereachentrytomovetothenextinputfield.
Intheexampleshownhere,fourlinearizationweightshavebeenentered(1.5kg,3.0kg,4.5kgand6.0kg).Whenyouclosetheinputmenubypressingthe“o“softkey,theinputvaluesaredirectlyapplied.
t Slidethemenuaccessswitchtotheright(=“closed“position)andreattachthecap.
OperatingInstructionsCombicsCompleteScales 37
ConfiguringWeighingPlatforms
Function Allocation of the allocation for the J Key for Calibration/Adjustment
Purpose TheJkeyisusedforthecalibration/adjustmentfunction.KeysettingscanbechangedwhentheServicemodeisactivated:
Procedure t Removethecap.t Slidethemenuaccessswitchtotheleft(=“open“position).t ActivatetheServicemode,see“ServiceMode.“
t Selectweighingplatform“WP 1“inthe“Device Parameters“menuitem.
t Ifthe“Internal“settingisnotalreadyactivated(markedby“o“),selectthesettingusingthe“Q“or“q“softkeyandconfirmwith“O.“
y Themenuforthe“WP-1 INTERNAL“deviceparametersisdisplayed.
t Usethe“Q“or“q“softkeytoselectandopenthe“Calibration/adjustment“menuusing“O.“
t Usethe“O“softkeytoopenthe“Cal/adj. sequence“menu.
t Usethe“Q“or“q“softkeytoselectthe “Cal. then manual adj.“menu(factorysetting)andconfirmwiththe“l“softkey.
t Usethe“o“softkeytogotothenextmenulevel.
t Usethe“O“softkeytoopenthe“Activate ext. adj.“menu.t Usethe“Q“or“q“softkeytoselectthe“Activated“menuitem
(factorysetting).Notforaverifiableconfiguration.t Geographicaldataisnotdisplayedduringcalibration/adjustment(factory
setting).
TodisplaygeographicaldataintheDeviceparametersmenu,openthe“Operating parameters“submenu.Menuitem“Display geogr. data>On“.
38 OperatingInstructionsCombicsCompleteScales
ConfiguringWeighingPlatforms
t Usethe“O“softkeytoopentheCAL key function“menu. y The“CAL key function“submenuisdisplayed.
t Usethe“Q“or“q“softkeytoselectthecorrespondingmenuitemandconfirmwith“l.“
y Themenuitemismarkedbyacircle“o.“
NoteThefunctionsthatcanbeconfiguredinthe“CAL key function“submenudependsontheselectedweighingplatformanditsconfigurationdata.Functionsthatcannotbeaccessedarenotdisplayedintheselectionscreen.
Important Note!Thefunctionsetinthe“CAL key function“menuiscarriedoutinthenormalweighingmodebecausewhenyouexittheSetupmenutheServicemodeisdeactivated.Toperformthefunctiononadigitalweighingplatform(suchasanISplatform),however,itmustbecarriedoutinServicemode.
t Theprocedureisasfollows:afterselectingthedesiredfunctionandexitingtheSetupmenu,reactivateServicemodeagainandthenexittheSetupmenuimmediatelybypressingtheMkeyorthe“oo“softkey.
y ThescaleisnowinServicemodewithoutthisbeingdisplayed.t TriggerthepreviouslysetfunctionusingtheJkey.
C.EXT.DC.EXT.DEF.
12 y Thedisplayshows“S_CAl:“indicatingthatthescaleisinServicemode.t Thecorrespondingmenuitemcanbeselectedusingthe“Select“softkey
andcarriedoutusingtheJkey.t Ifyoucancelthefunctionusingthe(keyorbyrestartingthescaleusing
theekey,youwillexittheServicemode.
External Calibration/Adjustment with Factory-Defined Weight (Default Weight)
Configuration Ifnotalreadyselected(factorysetting,markedby“o“whenactive),selectthe“CAL key function:Ext. cal./adj.; factory-def. wt.“menuitem(externaladjustmentwithafactory-defined,standardweight).t Usethe“Q“or“q“softkeytoselectthismenuitemandconfirmwith“l.“y Themenuitemismarkedbyacircle“o.“
Note:Themenuitems“Ext. cal./adj.; factory-def. wt.“(externaladjustmentwithafactory-defined,standardweight),“Ext. cal./adj.; user-defi ned wt.“(externaladjustmentwithauser-definedweight)and“Key blocked“canalsobeaccessedwithoutactivatingtheServicemode.
OperatingInstructionsCombicsCompleteScales 39
ConfiguringWeighingPlatforms
t Pressetoturnoffthedevice.t Presseturnthedevicebackon.y TheSartoriuslogoisdisplayedbriefly,afterwhichthedeviceisinnormal
weighingmode.t Press(tounloadandzerothescale.t PressJtostarttheexternaladjustment.
C.EXT.DC.EXT.DEF.
y Thedisplay“C.EXT.D“appearsbriefly.NoteIfthedisplayofgeographicaldata(elevationandlatitudeorgravity)isactivated,thisdataisdisplayedandconfirmedeachwithapressoftheJkey(youcancancelthecalibration/adjustmentprocessusingthe(key).Seealso“EnteringGeographicalDataforUseinLegalMetrology“inthischapter.
Procedure y Thetargetvalueoftherequiredadjustmentweight(5.000kgintheexample)isdisplayedasanegativevalue.
t Placetherequiredadjustmentweightontheplatform.
NoteIfthecalibration/adjustmentsequenceissettoautomatic(“Calibration/adjustment:Cal./adj. sequence:Cal., then auto adjust“menu,see“FunctionAllocationoftheallocationoftheJKeyforCalibration/Adjustment“)andtheadjustmentweightconsistsofseveralpieces,thentheyshouldbeplacedontheplatforminseriesatshortintervals.Whentheweighinginstrumenthasstabilized,theweightonthescaleisacceptedasthecalibrationweightafterapredefinedinterval,andtheweighinginstrumentiscalibrated/adjustedwiththisweight.Thedifferencesincethemostrecentspanadjustmentisnotdisplayed;thisvalueisoutputonlyonGMP-compliantprintouts.
y Afterabriefpause,thedifferencesincethelastspanadjustmentisdisplayed(calibration).
NoteThisdisplayonlyappearsforthe“Cal. then manual adj.“setting(seepreviousnote).If“Cal. then auto adj.“isactive,thecalibration/adjustmentprocedurecannotbecancelled.Tostoptheprocedureaftercalibrationandbeforeadjustmenttakesplace,pressthe(key(onlyif“Cal. then manual adj.“isactive).
t PressJtoadjustthescale(onlyif“Cal. then manual adj.“isactive).
y Attheconclusionofthecalibrationprocedure,thecalibrationweightisdisplayedasapositivevalue.
40 OperatingInstructionsCombicsCompleteScales
ConfiguringWeighingPlatforms
--------------------14.01.2010 13:50Type CAW3P1-6DC-LCESer.no. 12345678Vers.no. 1.02.101110BVers. 01-63-02--------------------External calibrationNom. + 5.000 kgDiff. + 0.010 kgExternal adjustmentDiff. + 0.000 kg--------------------14.01.2010 13:52Name:
--------------------
Whencalibration/adjustmentiscomplete,theGMP-compliantprintoutshownontheleftisgenerated.Iftheadjustmentprocedureiscanceled(onlycalibrationisperformed),thelasttwolines,“Externalcalibration”and“Diff.+0.000kg”arenotprinted.
t Unloadthescale.t Pressetoturnoffthedevice.t Presseturnthedevicebackon.y TheSartoriuslogoisdisplayedbriefly,afterwhichthedeviceisinnormal
weighingmode.
3
Ifaseriousoperatorerrorshouldoccurduringcalibration(forexample,ifthemenusetting“Cal. then auto adj.“isactiveandthewrongcalibrationweightisplacedonthescale),thescalemightcompletelyfailtostabilize,whichmeansitcannotshowazeropoint.Inthiscase,selectthe“Adjust without weights“menuandsetthemeansensitivityofthestrain-gaugeweighingbeamto2.0mV/V.Thenre-adjustthescale.Seealso“Adjustwithoutweights.“
Thezeropointisonlydisplayedforaverifiedscalewithd=e.
External Calibration/Adjustment with a User-Defined Weight
Configuration Selectthe“CAL key function:Ext. cal./adj.; user-def. wt.“menuitem(externaladjustmentusingauser-definedweight).
Note:Themenuitems“Ext. cal./adj.; factory-def. wt.“(externaladjustmentwithafactory-defined,standardweight),“Ext. cal./adj.; user-defi ned wt.“(externaladjustmentwithauser-definedweight)and“Key blocked“canalsobeaccessedwithoutactivatingtheServicemode.
t Usethe“Q“or“q“softkeytoselectthismenuitemandconfirmwith“l.“y Themenuitemismarkedassetbyacircle“o.“
t Enterthetargetvalueoftheadjustmentweightinthe“Calibration/adjustment“menuunder“Parameter for external weight“inthe“Cal/adj. wt“inputfield.
OperatingInstructionsCombicsCompleteScales 41
ConfiguringWeighingPlatforms
t Pressetoturnoffthedevice.t Presseturnthedevicebackon.y TheSartoriuslogoisdisplayedbriefly,afterwhichthedeviceisinnormal
weighingmode.t Press(tounloadandzerothescale.t PressJtostarttheexternaladjustment.
C.EXT.UC.EXT.USE.
y Thedisplay“C.EXT.U“appearsbriefly.
NoteIfthedisplayofgeographicaldata(elevationandlatitudeorgravity)isactivated,thisdataisdisplayedandconfirmedeachwithapressoftheJkey(youcancancelthecalibration/adjustmentprocessusingthe(key).Seealso“EnteringGeographicalDataforUseinLegalMetrology“inthischapter.
Procedure t PressJtoconfirmthedisplayedvalueorpress(tocanceltheadjustment.
y Thetargetvalueoftherequiredadjustmentweight(6.000kgintheexample)isdisplayedasanegativevalue.
t Placetherequiredadjustmentweightontheplatform. Ifthecalibration/adjustmentsequenceissetto“Cal.thenautoadjust”,referto
thenoteunder“ExternalCalibration/AdjustmentwithFactory-DefinedWeight(DefaultWeight).”
y Afterabriefpause,thedifferencesincethelastspanadjustmentisdisplayed(calibration).
t Ifyouonlywanttoperformacalibration,pressthe(keytocancelthecalibration/adjustmentprocedure.
t PressJtoadjustthescale.
y Attheconclusionofthecalibrationprocedure,thecalibrationweightisdis-playedasapositivevalue.
--------------------14.01.2010 13:50Type CAW3P1-6DC-LCESer.no. 12345678Vers.no. 1.02.101110BVers. 01-63-02--------------------External calibrationNom. + 6.000 kgDiff. + 0.010 kgExternal adjustmentDiff. + 0.000 kg--------------------14.01.2010 13:52Name:
--------------------
Whencalibration/adjustmentiscomplete,theGMP-compliantprintoutshownontheleftisgenerated.Iftheadjustmentprocedureiscanceled(onlycalibrationisperformed),thelasttwolines,“Externalcalibration”and“Diff.+0.000kg”arenotprinted.t Unloadthescale.t Pressetoturnoffthedevice.t Presseturnthedevicebackon.y TheSartoriuslogoisdisplayedbriefly,afterwhichthedeviceisinnormal
weighingmode.
42 OperatingInstructionsCombicsCompleteScales
ConfiguringWeighingPlatforms
3 Ifaseriousoperatorerrorshouldoccurduringcalibration(forexample,ifthemenu
setting“Cal. then auto adj.“isactiveandthewrongcalibrationweightisplacedonthescale),thescalemightcompletelyfailtostabilize,whichmeansitcannotshowazeropoint.Inthiscase,selectthe“Adjust without weights“menuandsetthemeansensitivityofthestrain-gaugeweighingbeamto2.0mV/V.Thenre-adjustthescale.Seealso“Adjustwithoutweights.“
Internal Calibration/AdjustmentThisfunctionisavailableonlyifadigitalweighingplatform(forexample,anISplatform)isconnectedtoWP1,eitherasasecondweighingplatformorastheonlyweighingplatformwithoutusingthebuilt-inA/DconverterWP1.TheconnectioncanbemadebothviatheCOM1,COM2orUNICOMinterfacewithacorrespondingconfigurationaswellasviatheexpansionPCBsforWP1orWP2.
ThisfunctionisalsoaccessiblewithoutactivatingtheServicemode.
Adjustment Without Weights
PurposeIntheServicemenu,adjustmentwithoutweightscanbecarriedoutbyenteringthecharacteristicdataoftheloadcells.
3 Adjustmentwithoutweightsmaynotbecarriedoutonweighingequipmentusedinlegalmetrology.
Setup information– Adjustmentwithoutweightsisonlypossiblewhenthemenuaccessswitchis
openintheServicemode.– The“Nominalload“parametermustbeenteredinthe“kg“unit.– The“Resolution“parametermustbeenteredinthe“kg“unitandmust
correspondtothescaleinterval“d“enteredfortheADCconfiguration.– The“Sensitivity“parameterisenteredin“mV/V“(seethedatasheetforthe
value).
h Thesevaluesareconvertedtointernalquantities.OncetheADCconfigurationdatahavebeenstored(byselectingthe“Save parameters“menuitem),theseparameterscannolongerberead.
OperatingInstructionsCombicsCompleteScales 43
ConfiguringWeighingPlatforms
Procedure t Removethecap.t Slidethemenuaccessswitchtotheleft(=“open“position).t ActivatetheServicemode,see“ServiceMode.“
t Selectweighingplatform“WP 1“inthe“Device Parameters“menuitem.
t Ifthe“Internal“settingisnotalreadyactivated(markedby“o“),selectthesettingusingthe“Q“or“q“softkeyandconfirmwith“O.“
y Themenuforthe“WP-1 INTERNAL“deviceparametersisdisplayed.t Usethe“Q“or“q“softkeytoselectandopenthe“Calibration/
adjustment“menuusing“O.“
t Usethe“Q“or“q“softkeytoselectanduse“O“toopenthe“Adjust without weights“menu.
t Usethe“O“softkeytoopenthe“Input parameters“menu.
y TheInputmenuisdisplayed. Enterthenominalcapacityandresolutionoftheloadcellsinkgandthe
sensitivityoftheloadcellsinmV/Vinthecorrespondinginputfields.Themaximumcapacityisusuallylessthanthevaluetobeenteredinthe“Adjust without weights“menuforthenominalcapacityoftheloadcell,asloadcellscarryadditionalweight(e.g.,aweighingplatform).
44 OperatingInstructionsCombicsCompleteScales
ConfiguringWeighingPlatforms
Iftheweighingplatformhasmultipleloadcells,multiplythenominalcapacityaccordingly.
Example:Theweighingplatformhas4loadcellseachat50kg.Thenominalcapacityis4x50kg=200kg.Intheexampleshownhere,theweighingplatformconsistsofoneloadcellwithamaximumcapacityof10kg.
t Press10.00andconfirmwiththe“l“softkey.y The“Resolution“inputfieldisselected. Thesmallestdigit“d“isenteredinthisfieldin“kg“.Thevaluemustcorrespond
tothe“D“entryin“ADC configuration: Standard: Ranges: Single-range mode.“
Intheexample,thisshouldbed=0.002kg.
t Press0.002andconfirmwiththe“l“softkey.y The“Sensitivity 1“inputfieldisselected. Iftheweighingplatformhasmultipleloadcells,enterthesensitivityeither– under“Sensitivity 1“…“Sensitivity 4“asanindividual
valueor– under“Sensitivity 1“asanaveragevalue. Ifanaveragevalueisenteredforallcells,oriffewerthan4loadcellsare
present,enter“0“intheremainingfields.Rangeofpermittedvalues:0.01…5mV/V.
t Press1.944,e.g.toenterasensitivityof1.944mV/V.t Confirmusingthe“l“softkey.y The“Sensitivity 2“inputfieldisselected.t Eitherenteravalueorsetallremaininginputfieldsto“0.“t Confirmeachusingthe“l“softkey.
t Pressthe“o“softkeytoexitthemenu.
t Usethe“q“softkeytoselectthe“Save parameters“submenu.
t Tosavetheconfiguration,select“Yes“andconfirmusingthelsoftkey. Inthefirstlineofthedisplay,themessage“Data stored“isshown
briefly.Thentheprogramthenreturnstothe“No“displaystatus.
t Usethe“o“toreturntothenextmenulevel.t PressM or“oo“toexittheSetupmenu.t Slidethemenuaccessswitchtotheright(=“closed“position)andreattachthe
cap.y Thedisplaygoesoutandthedevicerestarts.Thenweighingmodeisactive.
OperatingInstructionsCombicsCompleteScales 45
ConfiguringWeighingPlatforms
Function Allocation of the J Key for Linearization and Setting/Deleting the Preload
Purpose TheJkeyisnormallyusedforthecalibration/adjustmentfunction.ThefollowingadditionalfunctionscanbeallocatedtothekeywhentheServicemodeisactivated:– Externallinearizationwithdefaultweights– Externallinearizationwithenteredlinearizationweights– Internallinearization(forexternalISplatformsonly)– Setpreload– Deletepreload
3
Oncelinearizationhasbeencompleted,orafterapreloadhasbeensetordeletedthefunctionoftheJkeymustbereallocatedbacktoitsoriginalfunctionintheSetupmenu,e.g.externalcalibration/adjustmentwithdefaultweights.
Procedure t Removethecap.t Slidethemenuaccessswitchtotheleft(=“open“position).t ActivatetheServicemode,see“ServiceMode.“t Selectweighingplatform“WP 1“inthe“Device Parameters“
menuitem.t Ifthe“Internal“settingisnotalreadyactivated(markedby“o“),select
thesettingusingthe“Q“or“q“softkeyandconfirmwith“O.“y Themenuforthe“WP-1 INTERNAL“deviceparametersisdisplayed.t Usethe“Q“or“q“softkeytoselectandopenthe“Calibration/
adjustment“menuusing“O.“ y The“CAL key function“submenuisdisplayed.
t Usethe“Q“or“q“softkeytoselectthecorrespondingmenuitemandconfirmwith“l.“
y Themenuitemismarkedbyacircle“o.“
NoteThefunctionsthatcanbeconfiguredinthe“CAL key function“submenudependsontheselectedweighingplatformanditsconfigurationdata.Functionsthatcannotbeaccessedarenotdisplayedintheselectionscreen.
NoteThefunctionsetinthe“CAL key function“menuiscarriedoutinthenormalweighingmodebecausewhenyouexittheSetupmenutheServicemodeisdeactivated.Toperformthefunctiononadigitalweighingplatform(suchasanISplatform),however,itmustbecarriedoutinServicemode.
t Theprocedureisasfollows:afterselectingthedesiredfunctionandexitingtheSetupmenu,reactivateServicemodeagainandthenexittheSetupmenuimmediatelybypressingtheMkeyorthe“oo“softkey.
y ThescaleisnowinServicemodewithoutthisbeingdisplayed.t TriggerthepreviouslysetfunctionusingtheJkey.
y Thedisplayshows“S_CAl:“indicatingthatthescaleisinServicemode.t Thecorrespondingmenuitemcanbeselectedusingthe“Select“softkey
andcarriedoutusingtheJkey.t Ifyoucancelthefunctionusingthe(keyorbyrestartingthescaleusing
theekey,youwillexittheServicemode.
46 OperatingInstructionsCombicsCompleteScales
ConfiguringWeighingPlatforms
External Linearization with the Factory-Defined Weight (Default Weights)
Setup Information – Thisfunctionisaccessibleonlyifthesoftwareandthefunctionalityoftheconnectedweighingplatformpermitthisoperation.
– Externallinearizationwhenweighinginlegalmetrologyisonlypossiblewhenthemenuaccessswitchisopen.
– TheJkeymustbeassignedthe“Externallinearization“function,see“FunctionAllocationoftheJKeyforLinearizationandSetting/DeletingthePreload.“
– Activatingthedisplayofgeographicaldatahasnoeffectonthisfunction.
3
Oncelinearizationhasbeencompleted,theJkeymustbereallocatedbacktoitsoriginalfunctionintheSetupmenu,e.g.externalcalibration/adjustmentwithdefaultweights.
Procedure t Forscalesusedinlegalmetrology,slidethemenuaccessswitchtotheleft(=“open“position).
y Thedisplaygoesoutandthedevicerestarts.Thenweighingmodeisactive.t Press(tounloadandzerothescale.t PressJtostarttheexternallinearization.
y Thedisplay“L.EXT.D“appearsbriefly. Additionalstepsareexplainedin“ExternalLinearizationwithUser-Defined
Weights.“
OperatingInstructionsCombicsCompleteScales 47
ConfiguringWeighingPlatforms
External Linearization with User-Defined Weights
Setup Information – Thisfunctionisaccessibleonlyifthesoftwareandthefunctionalityoftheconnectedweighingplatformpermitthisoperation.
– Externallinearizationwhenweighinginlegalmetrologyisonlypossiblewhenthemenuaccessswitchisopen.
– TheJkeymustbeassignedthe“Externallinearization“function,see“FunctionAllocationoftheJKeyforLinearizationandSetting/DeletingthePreload.“
– Activatingthedisplayofgeographicaldatahasnoeffectonthisfunction.
3 Oncelinearizationhasbeencompleted,theJkeymustbereallocatedback
toitsoriginalfunctionintheSetupmenu,e.g.externalcalibration/adjustmentwithdefaultweights.
Configuration t Setthelinearizationweights,see“EnteringAdjustmentandLinearizationWeights.“
Procedure t Forscalesusedinlegalmetrology,slidethemenuaccessswitchtotheleft(=“open“position).
y Thedisplaygoesoutandthedevicerestarts.Thenweighingmodeisactive.t Press(tounloadandzerothescale.t PressJtostarttheexternallinearization.
y Thedisplay“L.EXT.U“appearsbriefly.
y Afterapprox.2seconds,thetargetvalueforlinearizationweight1isshownasanegativevalueonthedisplay(inexampleshownhere,1.500kg).
t Placetherequiredlinearizationweight1ontheplatform.t PressJtoapplylinearizationweight1orpress(tocancelthe
linearizationfunction.
y Afterashorttimethedifferencebetweenthemeasuredvalueandthetrueweightofthesamplewillbedisplayed.
48 OperatingInstructionsCombicsCompleteScales
ConfiguringWeighingPlatforms
--------------------14.01.2010 13:00Type CAW3P1-6DC-LCESer.no. 12345678Vers.no. 1.02.101110BVers. 01-63-02--------------------LinearizationWt.1 + 1.500 kgWt.2 + 3.000 kgWt.3 + 4.000 kgWt.4 + 6.000 kg completed--------------------14.01.2010 13:02Name:
--------------------
t PressJtoapplylinearizationweight1orpress(tocancelthelinearizationfunction.
y Afterthelinearizationweight1hasbeensavedyouwillbepromptedtoplacethesecondlinearizationweightontheweighingpan.
t Repeattheprocedureforallrequiredlinearizationweights.y Afterthelastlinearizationweighthasbeensavedyouwillbepromptedto
removeanyloadfromtheweighingpan.t Removealllinearizationweightsfromtheweighingplatform.y Thezeropointisappliedautomaticallyafterabrieftime.Theindicator
automaticallyswitchestoweighingoperation.Whenlinearizationiscomplete,theGMP-compliantprintoutshownontheleftisgenerated.
t Slidethemenuaccessswitchtotheright(=“closed“position).
OperatingInstructionsCombicsCompleteScales 49
ConfiguringWeighingPlatforms
Set preload
Setup Information – Settingthepreloadwhenweighinginlegalmetrologyisonlypossiblewhenthemenuaccessswitchisopen.
– TheJkeymustbeassignedthe“Setpreload“function,see“FunctionAllocationoftheJ KeyforLinearizationandSetting/DeletingthePreload.“
– Activatingthedisplayofgeographicaldatahasnoeffectonthisfunction.
3 Oncethepreloadhasbeenset,theJkeymustbereallocatedbacktoitsoriginalfunctionintheSetupmenu,e.g.externalcalibration/adjustmentwithdefaultweights.
Procedure t Forscalesusedinlegalmetrology,slidethemenuaccessswitchtotheleft(=“open“position).
t Presseturnthedevicebackon.y TheSartoriuslogoisdisplayedbriefly,afterwhichthedeviceisinnormalweighing
mode.t Press(tounloadandzerothescale.
y Displayafterthescalehasbeenzeroed.
t Placethepreloadweightontheweighingplatform.t PressJtostart“Setpreload.“
y Thedisplay“SET PREL“appearsbriefly. Afterashortperiodoftimethepreloadwillbeappliedandtheindicatorwill
automaticallyswitchbacktoweighingmode. Afterthe“SetPreload”operationhasbeencompleted,thescaleiszeroed.
--------------------14.01.2010 13:50Type CAW3P1-6ED-LCESer.no. 12345678Vers.no. 1.02.101110BVers. 01-63-02--------------------Set preload completed--------------------14.01.2010 13:52Name:
--------------------
Whenthe“Setpreload“functioniscomplete,theGMP-compliantprintoutshownontheleftisgenerated.
t Slidethemenuaccessswitchtotheright(=“closed“position).
50 OperatingInstructionsCombicsCompleteScales
ConfiguringWeighingPlatforms
Delete preload
Setup Information – Deletingthepreloadwhenweighinginlegalmetrologyisonlypossiblewhenthemenuaccessswitchisopen.
– TheJkeymustbeassignedthe“Deletepreload“function,see“FunctionAllocationoftheJ KeyforLinearizationandSetting/DeletingthePreload.“
– Activatingthedisplayofgeographicaldatahasnoeffectonthisfunction.
3
Oncethepreloadhasbeendeleted,theJkeymustbereallocatedbacktoitsoriginalfunctionintheSetupmenu,e.g.externalcalibration/adjustmentwithdefaultweights.
Procedure t Forscalesusedinlegalmetrology,slidethemenuaccessswitchtotheleft(=“open“position).
t Presseturnthedevicebackon.y TheSartoriuslogoisdisplayedbriefly,afterwhichthedeviceisinnormal
weighingmode. t Removethepreloadweightfromtheweighingplatform.
y Thedisplayshowstheremovedpreloadweightasanegativevalue.t PressJtostart“Deletepreload.“
y Thedisplay“CLR PREL“appearsbriefly. Afterashortperiodoftimethepreloadwillbedeletedandtheindicatorwill
automaticallyswitchbacktoweighingmode.
Afterthe“DeletePreload”operationhasbeencompleted,thescaleiszeroed.
--------------------14.01.2010 13:50Type CAW3P1-6DC-LCESer.no. 12345678Vers.no. 1.02.101110BVers. 01-63-02--------------------Delete preload completed--------------------14.01.2010 13:52Name:
--------------------
Whendeletingthepreloadiscomplete,theGMP-compliantprintoutshownontheleftisgenerated.t Slidethemenuaccessswitchtotheright(=“closed“position).
OperatingInstructionsCombicsCompleteScales 51
ConfiguringWeighingPlatforms
52 OperatingInstructionsCombicsCompleteScales
OperatingDesign
Weighing Mode Operating Design
Labeled KeysSomekeyshaveasecondfunction,activatedbypressingandholdingthekeyforover2seconds.Whetherafunctionisavailabledependsontheindicatoroperatingstateandoperatingmenusettings.
e On/Offkey
y standbyisdisplayedinStandbymode.
n Ifasecondweighingplatformsisconnected,thiskeytogglesthedisplaybetweenthetworeadouts.
( –Pressbriefly:Zero– Pressbriefly:cancelscalibration/adjustment– Presslongerthan2seconds:displaystheadjustment/configurationcounter
) Tarethescale:pressbriefly.
k DisplaysthesecondweightunitorSQmin(dependingonthesettings,see“Operation,““SQminFunction“).
J Startscalibrationoradjustment.
p – Forprinting: Pressbriefly.– PrintsGMPfooter:
Presslongerthan2seconds.
K Togglesunitbetweennormaland10-foldhigherresolution.
L Togglesthedisplaybetweengrossvalue(netvalueplustare)andnetvalue(grossvalueminustare).
c – Quitsanapplicationordeletesaninputcharacter: Pressthekeylessthan2seconds.
– Deletestheentireinputstring: Pressthekeylongerthan2seconds.
OperatingDesignYoucanusetheCombics3torecordweightvaluesfrom1to3weighingplatforms,calculateanddisplayweightvaluesthroughapplicationprograms,andassignIDstothesamplesweighed.
Configuretheindicatorfirst,usingtheSetupmenuforthedesiredapplicationprogram(printersettings,etc.).Thenyoucanbeginweighing.
Whenakeyispressedthatdoesnothaveanactiveoperatingmodefunction,anacousticalsignal(doublebeep)soundsandthemessage“——-—“isdisplayedfor2seconds.Thedisplaythenreturnstothepreviousscreencontent.
D TogglestotheInfomode:Presslongerthan2seconds.
R Productdatamemory:Savesinitializationanduserdata(productandtarevalues).Theproductdatamemorycanstoreover400productandtarevalues.
M Opens/ExitstheSetupprogram
1,2,3 ....,0 Entersnumbers,lettersandothercharacters.
a Togglesbetweennumericandalphabeticinput.
Soft keys
ID
F5 F4 F3 F2 F1
Thefunctionsofactivesoftkeysareindicatedbysymbolsandabbreviationsinthelastlineonthedisplay.Abbreviationexamples:– ID:IDlist– DELETE:Deleteentry
Symbols used for soft key functions: oo:Returntoinitialstate
o: NexthighermenulevelO: ShowitemsunderselectedentryQ: Scrollupintheinput/outputwindowq: Scrolldownintheinput/outputwindowl: Settheselectedmenuparameter
Numeric Input via the Keypadt Toenternumbers(onedigitatatime):
Press0,1,2…9t Tosaveinput:
pressthecorrespondingkey.Forexample,press)tosavemanualtareinput.
Text Input via the Keypadt Presstheakey.y “ABC“isdisplayed.t Forexample,pressthe4key.y Thecorrespondingletterisdisplayed.Theflashingcursormarksthefirstletter.t Pressthekeyasmanytimesneededtoselectthedesiredletter.t PresstheF1softkey(l)orwait2seconds.y Theselectedletterappearsonthedisplay.
OperatingInstructionsCombicsCompleteScales 53
OperatingDesign
Entering Spaces via the Keypad t Presstheakey.
y “ABC“isdisplayed. t Pressthe0key.
y Thecorrespondingselectionisdisplayed.Theflashingcursormarksthespace.t PresstheF1softkey(l)orwait2seconds.y Thespaceappearsonthedisplay.
Special Character Input via the Keypad t Presstheakey.
y “ABC“isdisplayed. t Pressthe1key.
y Thecorrespondingcharacterselectionisdisplayed.Theflashingcursormarksthefirstcharacter.
t PresstheF1softkey(l)orwait2seconds.y Thespecialcharacterappearsonthedisplay.
Deleting characters t Pressc.
Deleting entire input stringt PresstheF4softkey(ESC).
Saving Input t Enteravalue.
t Pressthecorrespondingsoftkey(e.g.1.IDtodefineanidentifier).
54 OperatingInstructionsCombicsCompleteScales
OperatingDesign
Saving Settings in Weighing Mode
YoucanspecifythesavetypeusedintheApplication ParametersSetupmenu.
Bydefault,allapplicationparameterssaved(e.g.,referencevalues)remaininmemoryandareavailablewhen
– thedevicehasbeenswitchedoffandthenonagain– youreturntotheoriginallyselectedapplicationfromasecondone(e.g.,when
youswitchfromAveragingbacktoCountingallparameterssavedforCountingareavailable).
Applying the Tare Weight Tosavetheweightontheweighingplatformasatareweight:t Placethetareobjectontheweighingplatform.t Press).y Thevalueisappliedasthetarevalue.
Input Through the Digital Control Port Youcanconnectaremotehandswitchorfootswitchtotheinputcontrol
line,forusewithallapplicationprograms.ThefollowingfunctionscanbeassignedintheSetupmenuDevice Parameters:Control I/O Ports:Universal Switch Key:
– Off – Zeroing key
– Print key – On key
– Print key >2 sec – CF key
– Tare key – F1 function key
– ISO test key – Appl. toggle key
– Fn key function – 10x higher resolution key
– WP toggle key – Net/gross value key
– Combined zero/
tare function
OperatingInstructionsCombicsCompleteScales 55
OperatingDesign
Display in Weighing Mode Weighing Mode: Display of Measured and Calculated Values
Lines for metrological data
Bar graph
Text lines
Soft key labels
Line for measured values
Plus or minus signStability
Battery symbol
Application symbol
Unit
Tare memoryCalculated values
Info/Status line
Thedisplayisdividedintoseveralsections.
Lines for metrological data Thefollowingparametersareshownhere:
Max Maximumcapacity(upperweighingrangelimit)oftheactiveweighingplatform Min Minimumcapacity(lowerweighingrangelimit)oftheactiveweighing
(verifiedmodelsonly) e Verificationscaleintervaloftheactiveweighingplatform(verifiedmodelsonly) d Smallestdisplaydigitoftheactiveweighingplatform R1R2 Displayofthecurrentweighingrangeoftheactiveweighingplatform
(withmultiplerangescaleconnected)
Symbols and Their Meaning
b TheBusysymbolappearswhenthescaleisprocessingafunctionactivatedbypressingakey.
+ - Theplusorminussignoftheweightorothermeasuredvalue
o Verifiedmodelsonly:Identifies“zero”asaweightvalue(afterthescaleortheactiveweighingplatformhasbeenzeroed)
Measured Value Line/Calculated Values
5.23r Thecurrentweightvalue(onverifiedscalesorplatformswithe=d,thelastdigitisborderedforidentification)
20 Acalculatedvaluewhenusinganapplicationprogram,suchasCountingorWeighinginPercent
Unit and Stability
g Thecurrentweightunit(e.g.“g“) pcs Identifiesadditionalcharacteristics(e.g.“pieces“forthe“Counting“application) Whentheweighingsystemreachesstability,theweightunitorcalculationunitis
displayedhere.
56 OperatingInstructionsCombicsCompleteScales
OperatingDesign
Data in Tare Memory, Calculated Value, Identification of the Active Weighing Platform when More Than One Platform is Used
! Identificationofcalculatedvalues(valuesnotusedinlegalmetrology) B/GNET Indicatesgrossvalueornetvalue(dataintarememory) PT Indicatesmanualtareinput(usingabarcodescanner)whenviewingtare
information. WP1 Displayoftheactiveweighingplatformwhen2platformsareconnected.
ThedisplayflashesforaISOCaladjustmentpromptifWP1isanIS-weighingplatform.
WP Whenthetimerisactive(Setup:Device Parameters:Operating Parameters:Timer),thesymbolflashestoindicatethatthesettimehashalfwayexpired.
Application, Printing and Battery Symbols
S Printinginprogress T GMP-compliantprintoutactive
, Batterystatus:‘Batteryfullycharged’or‘Batteryempty’
Bar Graph Thebargraphshowsthepercentageoftheweighingplatform’scapacitythatis
“usedup”bytheloadonthescale(grossvalue). 0% Lowerloadlimit 100% Upperloadlimit
Thefollowingsymbolsindicatetolerancelevelsforcheckweighing:
Bargraphshowing10%intervals
Minimumfor“checkweighing“
Targetvaluefor“checkweighing“
Maximumfor“checkweighing“
Application Symbols A SymbolfortheCountingapplication Y Symbolfor“checkweigher“countingdownto“zero“ L H W M B A D SymbolsfortheTotalizing,Checkweighing,Classification,Net-totalFormulation,
WeighinginPercent,Counting(withorwithoutreferencesampleupdating)andNeutralMeasurementapplicationprograms.Fordetailsonthesymbols,pleaseseethechaptersfortherespectiveapplicationprogramsinthemanual.
Text Lines Thetextlinesshowoperatorsupportinformation,suchasIDsanduserguidanceprompts.
Soft Key Line Thislineshowstheabbreviationsorsymbolsthatindicatesoftkeyfunctions.
OperatingInstructionsCombicsCompleteScales 57
OperatingDesign
LEDsLEDsindicate– whethertheweightexceedstolerancelimitsforcheckweighing– theweightvalueclassificationfortheClassificationapplication
Error Codes– Ifakeyisinactive,“-------”and/or“No function””isdisplayed
(2sec.)andanacousticsignal(double-beep)isemitted
– Temporaryerrorsaredisplayedfor2secondsinthemeasuredvalue/resultlineviaanerrorcode(e.g.,INF 09);fatalerrors(e.g.,ERR 101)aredisplayedcontinuouslyuntilclearedviaarestart.
Errorcodesaredescribedindetailin“DataInterfaces“in“ErrorCodes.“
Menu Operating Design Operating Example: Setup:Device parameters:
WP 1:Internal:Adapt filter
o Marksthecurrentmenusetting
Configuring parameters:t Softkey“Q“or“q“:Parametersettingst Softkey“l“:Confirmparametert M or“oo“:ExitSetupmenu
Menu display Display Mode for Configuration and Information (Setup)
Status line
Input/output window
Soft key labels
Thedisplayisdividedintothreesections.
Status LineIndicatesthefunctionofthecurrentscreenpage.IntheSetupprogram,thislineshowsthe“path”tothedatadisplayed.
Input and Output WindowForinputanddisplayofdetailedinformation;e.g.,fortheselectedapplication.Selecteditemsaredisplayedinversely(whitelettersonablackbackground).
Soft key labelsSeethedescriptioninthissection.
Saving Menu SettingsTheparametersselectedinthemenuremainsavedwhenyouswitchtoweighingmodeorturnoffthedevice.YoucanblockaccesstotheDeviceparametersmenubyrequiringapasswordtopreventunauthorizedoraccidentalsettingchanges(seealso“SettingupPasswordProtection“).
58 OperatingInstructionsCombicsCompleteScales
OperatingDesign
Configuration
YoucanconfiguretheindicatorbyselectingparametersintheSetupmenu.Thesearedividedintothefollowinggroups(menulevel1),menustructureseesectionthe“SetupOverview(Parameters)“section– Application parameters
– Fn key function
– Device parameters
– Info(device-specificinformation)– Language
Whenusedinlegalmetrology,notallparameterscanbeaccessed.Theindicatoronlydisplaysparametersthatcanbeselected.Factory-setparametersareidentifiedbyan“o”intheliststartingonthenextpage.
Setting the Language Youcanchoosefromthefollowinglanguagesfordisplayinginformation:– Deutsch
– English(factorysetting)– U.S. mode
– Français
– Italiano
– Español
Example:Selecting“U.S.Mode“forthelanguaget Pressetoturnonthedevice.
t PressM.y Themenuappearsonthedisplay.t Pressthe“q“softkeyseveraltimestoselectthe“Language“line.
t Pressthe“O“softkey.
y Thelanguageselectionappearsonthedisplay.t Pressthe“Q“softkeytoselectthe“U.S. mode“line.
OperatingInstructionsCombicsCompleteScales 59
OperatingDesign
t Pressthelsoftkeytosavethesetting.y Thesettingselection“o“movesto“U.S. mode.“t PressM orootoexittheSetupmenu.
Setting up Password Protection
t Pressetoturnonthedevice.t PressM.y Themenuappearsonthedisplay.t Pressthe“q“softkeyseveraltimestoselectthe“Device
parameters“line.
t Pressthe“O“softkey.
t Pressthe“q“softkeyseveraltimestoselectthe“Password“line.
y Theinputlineappearsonthedisplay.t Enternumbersand/orlettersviathekeypad,see“NumericInputviathe
Keypad“and“LetterInputviatheKeypad.“t Pressthe“l“softkeytosavethesetting.t PressM or“oo“toexittheSetupmenu.
60 OperatingInstructionsCombicsCompleteScales
OperatingDesign
Setting up Password Protection
t Pressetoturnonthedevice.t PressM.y Themenuappearsonthedisplay.t Pressthe“q“softkeyseveraltimestoselectthe“Device
parameters“line.
t Pressthe“O“softkey.
y TheAccesswindowappearsonthedisplay.t Enterthepasswordviathekeypad,see“NumericInputviatheKeypad“and
“LetterInputviatheKeypad.“t Pressthe“l“softkey.
y Thedeviceselectionappearsonthedisplay.t Pressthe“q“softkeyseveraltimestoselectthe“Password“line.
y Theinputlineappearsonthedisplay.t Pressc severaltimestodeletethepassword.t Pressthe“l“softkeytosavethedelete. Ifnotyetsaved,theprocesscanbecanceledusingthe“ESC“softkey.t PressM or“oo“toexittheSetupmenu.
OperatingInstructionsCombicsCompleteScales 61
OperatingDesign
Printing Parameter Settings
Example: Maximum20charactersperline.
--------------------
12.01.2010 09:46
Type CAIS3
Ser.no 12345678
Vers. 1.02.101110
BVers. 01-63-02
--------------------
SETUP
DEVICE
--------------------
WP 1
Internal
WP 2 off
COM1
Data communcations
SBI
Baud rate
1200 Baud
Parity
Odd
Number of Stop bits
1 Stop bit
Handshake mode
Hardware 1-char
Number of data bits
7 Bit
Data output
Printout printer 1
etc.
62 OperatingInstructionsCombicsCompleteScales
OperatingDesign
Setup Overview (Parameters)o=FactorysettingsW=User-definedsetting
Setup
Applicationparameters:Pleaserefertothe“BasicApplicationPrograms”manual
Fnkeyfunction oOff Unitconversion SQMIN(onlypossiblewhenthedisplayhasbeenturnedoninthe“Deviceparameters:SQMin“menuitem)
Deviceparameters WP1 RS-2321) SBIstandard SBIverifiable oIS-232 ADC-232
RS-4851) oIS-485 ADC-485
Internal Calibration/Adjustment CALkeyfunction oExt.cal./adj.;factory-def.wt. Ext.cal./adj.;user-definedwt. Keyblocked Cal./adj.sequence Cal.thenautoadjust oCal.thenmanualadjust isoCALfunction3) oOff Adjustmentprompt Activateexternaladjustment2) oActivated Deactivated Parameterforexternalweight Cal./adj.weight: Calibration/adjustmentunit Grams/g Kilograms/kg Tons/t Pounds/lb Adaptfilter Min.vibration oNormalvibration Strongvibration Extremevibration Applicationfilter oFinalreadout Fillingmode Lowfiltering Withoutfiltering Stabilityrange 1/4digit 1/2digit 1digit2) o2digits2) 4digits2) 8digits2)
1)Equipmentversion:–thenblockedinternally2)Notavailableondevicesverifiedforuseinlegalmetrology3)OnlywhenoperatedwithSartoriusISweighingplatformsoranexternalADC
OperatingInstructionsCombicsCompleteScales 63
OperatingDesign
DeviceParameters WP1 Internal Stabilitydelay Withoutdelay oShortdelay Averagedelay Longdelay
Taring1) Withoutstability oAfterstability
Autozero oOn Off
Weightunit12) User-definable/o(factorysetting:grams)1) Grams/g oKilograms/kg Carats/ct1) Pounds/lb1) Ounces/ozv) Troyounces/ozt1) HongKongtaels/tlh1) Singaporetaels/tls1) Taiwantaels/tlt1) Grains/GN1) Pennyweights/dwt1) Milligrams/mg1) Partsperpound/lb1) Chinesetaels/tlc1) Mommes/mom1) Austriancarats/K1) Tola/tol1) Baht/bat1) Mesghal/MS1) Tons/t lb/oz
Displayaccuracy1 oAlldigits Onelessforwt.change Index+11) Index+21) Oneless1)
Zerorange 1percent/max.cap. o2percent/max.cap.
Zeroatpoweron 2percent/max.cap. 5percent/max.cap. o10percent/max.cap.
Tare/zeroatpoweron: oOn Off Onlyzeroatpoweron
1)Notavailableondevicesverifiedforuseinlegalmetrology2)Dependsonweighingplatformtype
64 OperatingInstructionsCombicsCompleteScales
OperatingDesign
DeviceParameters WP1 Internal Weightunit22) User-definable/o(factorysetting:grams)1) oGrams/g Kilograms/kg Carats/ct1) Pounds/lb1) Ounces/oz1) Troyounces/ozt1) HongKongtaels/tlh1) Singaporetaels/tls1) Taiwantaels/tlt1) Grains/GN1) Pennyweights/dwt1) Milligrams/mg1) Partsperpound//lb1) Chinesetaels/tlc1) Mommes/mom1) Austriancarats/K1) Tola/tol1) Baht/bat1) Mesghal/MS1) Tons/t lb/oz
Displayaccuracy2 oAlldigits Onelessforwt.change Index+11) Index+21) Oneless1)
Factorysettings:weighingparametersonly Yes oNo
1)Notavailableondevicesverifiedforuseinlegalmetrology2)Dependsonweighingplatformtype
OperatingInstructionsCombicsCompleteScales 65
OperatingDesign
DeviceParameters WP1 Internal Weightunit32) User-definable/o(factorysetting:grams)1) oGrams/g Kilograms/kg Carats/ct1) Pounds/lb1) Ounces/oz1) Troyounces/ozt1) HongKongtaels/tlh1) Singaporetaels/tls1) Taiwantaels/tlt1) Grains/GN1) Pennyweights/dwt1) Milligrams/mg1) Partsperpound/lb1) Chinesetaels/tlc1) Mommes/mom1) Austriancarats/K1) Tola/tol1) Baht/bat1) Mesghal/MS1) Tons/t lb/oz
Displayaccuracy3 oAlldigits Onelessforwt.change Index+11) Index+21) Oneless1)
Factorysettings:weighingparametersonly Yes oNo
Off COM1(whentheWPisassignedtothisinterface) COM2(whentheWPisassignedtothisinterface) UNICOM(whentheWPisassignedtothisinterface) Device parameters WP2 RS-2323) oADC-232similarto“Internal“menuforWP1 RS-4853) oADC-485similarto“Internal“menuforWP1 oOff COM1similartoWP1 COM2similartoWP1 UNICOMsimilartoWP1
1)Notavailableondevicesverifiedforuseinlegalmetrology2)Dependsonweighingplatformtype3)Equipmentversion
66 OperatingInstructionsCombicsCompleteScales
OperatingDesign
DeviceParameters COM1 oOff WP3 oRS-232 SBIstandard(9600baud) SBIverifiable(9600baud) oIS-2321) ADC-2321)
Datacommunications oSBI Baudrate 150baud 300baud 600baud o1200baud 2400baud 4800baud 9600baud 19200baud
Parity Space1) oOdd Even None2)
Numberofstopbits o1stopbit 2stopbits Handshakemode Softwarehandshake oHardware1-char Numberofdatabits o7bits 8bits
Dataoutput Onrequest,withoutstability oOnrequest,afterstability Automatic,withoutstability o1displayupdate 2displayupdates 10displayupdates 100displayupdates Onrequest,withoutstability o1displayupdate 2displayupdates 10displayupdates 100displayupdates Printoutprinter1 Printoutprinter2
1)Notwith8databits2)Notwith7databits
OperatingInstructionsCombicsCompleteScales 67
OperatingDesign
DeviceParameters COM1
Datacommunications oSBI Lineformat Forrawdata(16characters) oForotherapps.(22characters) Signformat Donotoutput+sign oOutput+sign Factorysetting Yes oNo
XBPIRS-232
SMA Baudrate 150baud 300baud 600baud o1200baud 2400baud 4800baud 9600baud 19200baud Parity Space1) Odd Even oNone2) Numberofstopbits o1stopbit 2stopbits Handshakemode Softwarehandshake oHardware1-char Numberofdatabits o8bits
1)Notwith8databits2)Notwith7databits
68 OperatingInstructionsCombicsCompleteScales
OperatingDesign
DeviceParameters COM1 Printer11) YDP20 Baudrate o1200baud 2400baud 4800baud 9600baud 19200baud Parity Space oOdd Even Numberofstopbits o1stopbit 2stopbits Handshakemode Softwarehandshake oHardware1-char
YDP14IS oStrip Label
Universal Baudrate 150baud 300baud 600baud 1200baud 2400baud 4800baud o9600baud 19200baud Parity Odd Even oNone Numberofstopbits o1stopbit 2stopbits Handshakemode oSoftwarehandshake Hardware,1-char Numberofdatabits o8bits
oYDP14IS oStrip Label Label,manualformfeed
Printer21)Similartoprinter1
1)Max.2printerscanbeconfigured
OperatingInstructionsCombicsCompleteScales 69
OperatingDesign
DeviceParameters COM2similartoCOM1
UNICOM(optionalinterface) oOff
WP3 oRS-232 SBIstandard(9600baud) SBIverifiable(9600baud) oIS-2321) ADC-2321)
RS-485 oIS-4851) ADC-4851)
Datacommunications oSBIsimilartoCOM1 xBPI-232similartoCOM1 xBPI-485address0to31canbeselected SMAsimilartoCOM1 Profibusaddress:0to126canbeselected, factorysetting:126 Ethernet
Printer11)SimilartoCOM1
Printer21)SimilartoCOM1
Analogoutput Analogoutput:value oNetvalue Grossvalue
AnalogOut:ErrorSignal oHighlevel(20mA) Lowlevel(0/4mA).
Whenmenuisopenorduringcalibration(0/4mA)onthisinterface.
Analogoutput:mode oZerotomaximumcapacity Minimum/Maximumvalues
AnalogOut:DataOutputMin./Max. oMin.(0/4mA)inputinkg Max.(20mA)inputinkg
1)Notwith8databits
70 OperatingInstructionsCombicsCompleteScales
OperatingDesign
DeviceParameters I/Ocontrol Inputports Universalswitchkey Off p Printkey p Printkey-long ) Tarekey oJ ISO-Testkey k Fnkey n WPtogglekey Comb.tare/zerofunction (zeroifpossible,otherwisetare.) ( Zerokey e Onkey c CFkey v F1functionkey D Togglebetweenapplications K 10xhigherresolutionkey L Net/grossvaluekey
Levelinternaloutputports oAllactivelow Allactivehigh
Barcode oReference Tare ID1 Input Inputwithoutactivatingfunction Externalkeyboard
Config.printout Headers Line1: Line2:
IDcodes ID1: ID2: ID3: ID4: ID5: ID6:
ISO/GLP/GMPprintout oOff Forseveralapplicationresults
Date/time oDatewithtime Dateonly
Onceatstability oOff On
FlexPrint oOff On
OperatingInstructionsCombicsCompleteScales 71
OperatingDesign
DeviceParameters Config.printout Printer1 Numberofprintouts o1printout 2printouts
Indiv.:Printoutf.app./weighing List <-> Selection Gross(G#) Spaceline Tare -------- Net(N) Formfeed Spaceline Date/time Time GMPheader GLPfooter Transactionno. ID1…ID6 Tare2(T2/PT2) Headerline1 Headerline2 Scaleser.no. Productno. Productname ProductID1…ID4
(application-dependentvalues)
Comp.:Printoutaftersavingval.2)Similartoindividual
Total:PrintoutafterpressingCF2)Similartoindividual
Printer21)Similartoprinter1
Decimalseparator oPeriod Comma
Datarecords(e.g.alibimemory,productdatamemory) Alldatarecords oSpecifiedquantity
Printoutfactorysetting Yes oNo
1)Max.2printerscanbeconfigured2)Onlywhen“Totalizing“and/or“Nettotal“hasbeenselectedunder“Application parameters:Application 3“
72 OperatingInstructionsCombicsCompleteScales
OperatingDesign
DeviceParameters Operatingparameters Acousticsignal oOn Off LinkedtothegreenLED
Keypad Blockkeyfunctions Allkeysunblocked Allblockedexcepte Alphanumerickeysblocked Weighingplatformswitchdisabled Zerokeyblocked Tarekeyblocked Fnkeyblocked ISO-Testkeyblocked Printkeyblocked 10Xhigherresolutionkeyblocked Net/grossvaluekeyblocked CFkeyblocked Softkey5keyblocked Softkey4keyblocked Softkey3keyblocked Softkey2keyblocked Softkey1keyblocked Applicationswitchdisabled Setupkeyblocked Memkeyblocked
Display Contrast 0 1 2 3 4 o5 6 7
Backlighting oOn Autoshutoffacc.to.timer
Model o2 1
Automaticshutdown Auto-offacc.to.timer oNoautomaticshutoff
Timer o1+1minute 2+2minutes 5+5minutes
Mainscale oWP1 WP2 WP3
Displaygeogr.data Off oOn
Factorysettings:operat.param. Yes oNo
OperatingInstructionsCombicsCompleteScales 73
OperatingDesign
DeviceParameters Clock Time: Date:
TestI/Oports Setinternaloutputs Int.output1(Lighter) 0 Int.output2(Equal) 0 Int.output3(Heavier) 0 Int.output4(Set) 0
Readinternalinputs Int.input1: 0
Passwords Password:
SQmin Display oNo Yes
GMPprint oNo Yes
Alibimemory Alibimemoryperiod Indays 90
74 OperatingInstructionsCombicsCompleteScales
OperatingDesign
Setup
Info Service Servicedate:
Terminal Model: Serialno. BasicID: Versionno.:(applicationsoftwareversion)
1.WP1 Model2): Versionno.:(softwareversion) Serialno.2): Latitude:1) Altitude:1) Grav.acc.:1) Accessswitch
2.WP2,seeWP1
3.WP3,seeWP1
FlexInfo ID--- V.---
Alibimemory Date Time Transactionno.
Language Deutsch oEnglish U.S.mode Français Italiano Español
1)Dependingonconfigurationpriortoverification:eitherlatitude/altitudeorgravitationalacceleration2)NotdisplayedforinternalADC
OperatingInstructionsCombicsCompleteScales 75
OperatingDesign
OperationWeighing
Thisapplicationisalwaysavailableduringoperation.
Features – Zeroingbypressing(– Storingtheweightontheplatformasatarebypressing)– Tarecontainerweightautomatically– Useabarcodescannertoentertareweight– Usethenumerickeys0 toenteratareweightandpress)tosave– Deletetarevaluesusingtheckeyandsaveusingthe)key– Togglethedisplayusingthekkeybetween:– 1stand2ndweightunit– SQmin– Youcanconfigurethekkeyfunctioninthe“Fn key“Setupmenu– 10-foldincreasedresolutionusingtheKkey– Weighingusinguptothreeweighingplatforms– IndividualnumericIDcodesforweightvalues– Printweightvalues:– Manually,bypressingp– GMPprintout(see“DataInterfaces“)– Automaticprintout– Automaticdataoutput(see“DataInterfaces“)– RestorefactorysettingsintheSetupmenu:„Application parameters:Factory settings: only application:Yes“
Soft Key Functions ID EnteruptosixIDcodesforidentifyingresultsontheprintout 1st ID SavethevalueenteredasthefirstIDcode.
Preparationt SelectSetup:PressM.t SelectApplicationparameters:Pressthe“O“softkey.t Select“Application 1 (basic settings)“:
Pressthe“O“softkey.t Confirmthe“Weighing“application:Pressthe“l“and“o“softkeys.t Selectthe“Min. load f. auto. taring/printout“
function:Pressthe“O“softkey.
t Confirmthe“o 10 digits“setting:Pressthe“l“and“o“softkeys.
t Selectthe“Factory setting“menuitem:Pressthe“O“softkey.t Confirmthe“o No“setting:Pressthe“l“and“o“softkeys.t TosavesettingsandexittheSetupmenu:PresstheMkeyorthe“oo“soft
key.
76 OperatingInstructionsCombicsCompleteScales
Operation
Automatic TaringThefirstweightonthescalethatexceedsthepresetminimumcapacityisstoredinthetarememoryatstability.Thevaluesforsubsequentloadsarestoredasweightvalues.Thescalereturnstotheinitialstatewhentheloadonthescaleislessthan50%oftheminimumload.
OperatingMenuSetting: “Application parameters: Autotare 1st weight:Yes“
Minimum load for automatic taring and automatic printingTotarecontainerweightsautomatically,youneedtosetaminimumloadintheSetupmenu,under:“Application parameters:Min. load f. auto. taring/printout:o 10 digits“
Youcansetthefollowingfortheminimumload:1digit(nominimumload)2digits5digits10digits20digits50digits100digits200digits500digits1000digits
The“digits“hererefertothescaleintervalsfortheconnectedweighingplatform.Iftheintervalis1gand1000digitsarerequired,theminimumloadis1000g(1000intervals).Iftheweighingplatformintervalis5gandthesamenumberofdigitsasabovearerequired,theminimumloadis5000g.Oncetheminimumloadhasbeenexceeded,theweighingplatformistaredautomaticallyand/oranautomaticprintoutisgenerated.
Automatic PrintingThefirstweightvaluethatexceedstheminimumloadisprinted.Ifthemenuitemisalsoactivatedforautomatictaring,itisonlytaredwhentheminimumloadisexceeded.Inthiscase,anautomaticprintoutwouldonlybegeneratedwhenthesecondweightvalueexceedstheminimumload.
SettingintheSetupMenu: “Device parameters:Config. printout:Once at stability:On“
Weighing using up to three weighing platformsPressthen keytotogglebetweenthreeweighingplatforms.
OperatingInstructionsCombicsCompleteScales 77
Operation
Main scale: first platform displayed on start-upYoucanselecttheweighingplatformtobedisplayedfirstwhenthedeviceisturnedonintheSetupmenu:“Device parameters:Operating parameters:Main scale:oWP 1“Pressntotogglethereadoutbetweenplatforms.
Using a barcode scanner to enter tare weightThetareweightofthecontainercanbeenteredviaabarcodescanner.
OperatingMenuSetting: “Device parameters:Bar code:oTare-value“Thevalueisappliedandsavedautomatically.ThecontentofthetarememorycanbedisplayedinInfomodebypressingtheDkey.
Using a barcode scanner to enter application parametersApplicationparameters(referencevalue)canbeenteredviaabarcodescanner.
OperatingMenuSetting: “Device parameters:Bar code:oReference-value“Thevalueisappliedandsavedautomatically.
Using a barcode scanner to enter an identifierIdentifierscanbeenteredviaabarcodescanner.
OperatingMenuSetting: “Device parameters:Bar code:oID“Thevalueisappliedandsavedautomatically.
Scanning barcodes directlyYoucandirectlyscanabarcodeusingthebarcodescanner.
OperatingMenuSetting: “Device parameters:Bar code:oInput“Thebarcodecancontainthefollowingcodes:– “I“forwriteidentifier– “T“forsavetarememory– “R“forwritereferenceweight– “A“foractivateproductdatamemory
Examples: “I4Anton“ =writethecharacterstringtoID4:Anton“TC1“ =write1Kgtothepresettarememory.“C“ =unit:Kilograms“B“ =grams“D“ =carat,etc.“RC0.0023“=write0.0023kgasthereferenceweight“A1“ =loadproductdatamemory1
78 OperatingInstructionsCombicsCompleteScales
Operation
Adjustment/Configuration counter for standard scales Purpose Automaticrecordingofchangestoadjustmentandweighingparametersusingtwo
independentcounters.Thevaluesremainsavedforthelifeofthecomponent.
t Todisplaybothcounters,pressandholdthe(keyforlongerthan2seconds.
y The“Configurationcounter“isthenshownintheweightdisplayfor3seconds(identifiedbya“P“).Thenthe“Adjustmentcounter“isdisplayedforanother3seconds(identifiedbya“C“).After6seconds,theinformationdisplayturnsoffautomatically.
Adjustment Counter Features: – Counterlimitedto9999– Counterat“C0000“forhardwarecommissioning– Countercannotbereset– Counterisupdatedautomaticallywhen:– linearization,calibration/adjustment/preloadchangeissuccessful – usercalibration,adjustmentorlinearizationweightischanged – Whenthefollowingparametersarechanged: – FunctionJkey – Zeroingrange – Initialzeropointrange – Theaboveparametersareresettofactorysettings
Configuration Counter Features: – Counterlimitedto9999– Counterat“P0000“forhardwarecommissioning– Countercannotbereset– Counterisupdatedautomaticallywhen: – Whenthefollowingparametersarechanged: – Installationlocation – Applicationfilter – Stabilityrange – Taring – Autozero – Weightunit1 – Weightunit2 – Weightunit3 – Theaboveparametersareresettofactorysettings – Turningtheapplicationautomatictaringon/off – Restoreapplicationparameterstofactorysettings
OperatingInstructionsCombicsCompleteScales 79
Operation
Device Parameters
Password Protection Accesstodeviceandapplicationparameterscanbepassword-protectedagainstunauthorizedchangesintheSetupmenuunder“Device parameters: Password,“seethe“SettingupPasswordProtection“sectioninthe“Operat-ingDesign“chapter.
Acoustic Signal Anacousticsignal(singlebeepforactive,doublebeepforinactivekeys)isemittedwhenyoupressakey.Theacousticsignalcanbeturnedon/offandlinkedtothegreenLEDintheSetupmenuunder“Device parameters:Operating parameters:Acoustic signal.“
Keys Keyscanbeblocked/unblockedintheSetupmenuunder“Device parameters:Operating parameters:Keys.“Thefollowingsettingsareavailable:– Allkeysunblocked(defaultsetting)– Allblockedexcepte and H– Alphanumerickeysblocked– n blocked– ( blocked– ) blocked– k blocked– J blocked– p blocked– K blocked– L blocked– c blocked– Softkey1…5blocked– D blocked– H blocked– c blocked
Automatic Shutoff of Combics YoucanspecifythattheindicatorwillshutoffafterasettimehaselapsedintheSetupmenuunder“Device parameters:Operating parameters:Automatic shutoff,“
Display Lighting ThefollowingsettingscanbemadefordisplaylightingintheSetupmenuunder“Device parameters:Operating parameters: Display:“– Contrast– Backlighting– Model
Timer Thetimerusedtoturnthedeviceand/ordisplaylightingon/offcanbesetto2,4,or10minutesintheSetupmenuunder“Device parameters: Operating parameters:Timer.“
80 OperatingInstructionsCombicsCompleteScales
Operation
Tare the scale by placing a container on the weighing platform
t Presstheekeytoturnontheindicator.y Theautomaticself-testruns.
Whentheweightreadoutisshown,thescaleisreadytooperateandautomaticallysettozero.Withnoloadontheplatform,youcanzerotheweighingplatformatanytimebypressing(.
t Placeemptycontaineronthescale.y Thecontainerweightisdisplayed.t Pressthe) keytotarethescale. Note:Iftheautomatictarefunctionisenabled,youdonotneedtopressthe
)key.Thetareweightissavedautomaticallywhenyouplacethecontainerontheplatform.
t Waituntilazerovalueisdisplayedtogetherwiththe“NET“symbol(netweight).
t Placesampleontheplatform.
t Waituntiltheweightunitsymbolisdisplayed(indicatingstability).t Readtheweightvalue.
OperatingInstructionsCombicsCompleteScales 81
Operation
Weighing with numeric entry of tare value and printing the results.
t Presstheekeytoturnontheindicator.y Theautomaticself-testruns. Whentheweightreadoutisshown,thescaleisreadytooperateand
automaticallysettozero.Withnoloadontheplatform,youcanzerotheweighingplatformatanytimebypressing(.
t Pressthe.25keytoenteraknowntareweightviathekeypad(inthisexample,0.25kg).
t Pressthe) keytoapplythetareweight.
t Placethecontainerwithsampleontheplatform.
t Readtheresults.
t PresstheL keytotogglethedisplaytothenetweightvalue.y Thedisplayshowsthegrossweight(inthisexample,0.250kgforthecontainer
plus2.000kgforthesample).
82 OperatingInstructionsCombicsCompleteScales
Operation
t PresstheL keytotogglebacktothepreviousdisplay.
t Pressthep keytoprinttheresults.--------------------24.10.2010 10:09Typ CAW3P1-12ED-LVers. 1.02.101110BVers. 01-63-02--------------------EISENSCHMIDTGOETTINGENChargen-Nr. 123456Kunde Schulze24.10.2010 10:09--------------------
G# + 2.250 kgT + 0.000 kgPT2 + 0.250 kgN + 2.000 kg----------------------------------------24.10.2010 10:10Name:
--------------------
y StartofGMPheader(onlyifGMP-compliantprintoutisconfigured).
EndofGMPheader Headers
Identifiers
StartofGMPfooter(onlyifGMP-compliantprintoutisconfigured)
EndofGMPfooter
OperatingInstructionsCombicsCompleteScales 83
Operation
Weighing with variable tare values, printing results, deleting tare values
t Presstheekeytoturnontheindicator.y Theautomaticself-testruns. Whentheweightreadoutisshown,thescaleisreadytooperateand
automaticallysettozero.Withnoloadontheplatform,youcanzerotheweighingplatformatanytimebypressing(.
t Placeemptycontaineronthescale.t Pressthe) keytotarethescale. Note:Iftheautomatictarefunctionisenabled,youdonotneedtopressthe
)key.Thetareweightissavedautomaticallywhenyouplacethecontainerontheplatform.
t Waituntilazerovalueisdisplayedtogetherwiththe“NET“symbol(netweight).
t Placeapackagedsampleinthecontainer.t Pressthe.25keytoentertheknowntareweightofthepackagevia
thekeypad(inthisexample,0.25kg).t Pressthe) keytoapplythepackageweightthatwasentered. Bothtareweightsareaddedtogether.
84 OperatingInstructionsCombicsCompleteScales
Operation
t ReadtheNetweight.
G# + 6.433 kgT + 4.183 kgPT2 + 0.250 kgN + 2.000 kg--------------------
t Pressthep keytoprinttheresults.
t Pressthe0key.t Pressthe) keytoapplytheenteredvalue.
y Thetarevaluesaredeleted.Thegrossvalueappearsonthedisplay.
G# + 6.433 kgT + 0.000 kgN + 6.433 kg--------------------
t Pressthep keytoprinttheresults.
OperatingInstructionsCombicsCompleteScales 85
Operation
Calibration, Adjustment Purpose Performcalibrationtodeterminethedifferencebetweenthevaluedisplayedand
theactualweightontheplatform.Calibrationdoesnotentailmakinganychangeswithintheweighingequipment.
Duringadjustment,thedifferencebetweenthemeasuredvaluedisplayedandthetrueweightofasampleiscorrected,orisreducedtoanallowablelevelwithinmaximumpermissibleerrorlimits.
Configuration for Use in Legal Metrology Configurationoftheweighinginstrumentforuseinlegalmetrologyissetbya
switch.Theswitchislocatedonthebackoftheweighingplatformandcoveredbyaprotectivecap.
UsingaverifiedscaleinlegalmetrologyintheEU:TheType-ApprovalCertificateforverifiedscalesisonlyvalidfornon-automaticweighinginstruments.Forautomaticoperationwithorwithoutadditional,integratedequipment,pleasefollowtheapplicablenationalregulationsfortheinstallationlocation.
ExternallyConnectedISScales: Beforeuseinlegalmetrology,thescaleshouldbeadjustedviatheinternaladjustmentequipmentattheinstallationlocation:seechapter“ConfiguringWeighingPlatforms,“section“InternalAdjustment.“
3 Thetemperaturerange(°C)listedontheIDlabelshouldnotbeexceededduringoperation.
ForServicing: Externaladjustmentforverifiedscalesofaccuracyclassl– Externaladjustmentisblockedinlegalmetrology(switchcoverissealed)– Externaladjustmentisonlypossiblebyremovingtheseal.Ifthesealisbroken,
thevalidityofverificationwillbecomevoidandyoumusthaveyourscalere-verified.
Usingaverifiedscaleinlegalmetrologywithinternaladjustmentequipment:t Beforeuseinlegalmetrology,the“internaladjustment“functionshouldbe
carriedoutattheinstallationlocation:
Opening the Menu Access Switch Themenuaccessswitchislocatedonthebackoftheindicatorrightnexttotheweighingplatformconnection.
PS2
t Removethecap.t Slidetheswitchtotheleft(=“open“position,foruseinlegalmetrology).
h YoucandeterminethepositionoftheswitchintheSetupmenuunder“Info:WP.“
86 OperatingInstructionsCombicsCompleteScales
Operation
Features Whichofthefollowingfeaturesareavailabledependsontheconnectedweighingplatform.ThesefeaturesareconfiguredintheSetupmenu:
– InternaladjustmentforseveralCAHmodels– Externaladjustmentblockedinverifiedweighinginstruments– Externaladjustmentwiththedefaultweightvalueoruser-definedweight
(notavailableonverifiedinstruments)under“…Calibration/ adjustment:CAL key function.“
– Specifytheweightforexternalcalibration/adjustmentunder“…Calibration/adjustment:Parameter for external weight“
– InternaladjustmentforISweighingplatforms(configureunder“COM1:,COM2:orUNICOM:WP3“)
– BlocktheJkeytopreventtheuseofthefunctionsdescribedaboveunder“…Calibration/adjustment:CAL key function.“
– Calibratefirst;thenadjustautomaticallyormanually(notforverifiedweighinginstruments)under“…Calibration/adjustment: Cal/adj. sequence.“
– ForSartoriusISweighingplatformsonly:FlashingWPsymbolasadjustmentprompt(ifmorethanoneweighingplatformisconnected,theplatformnumberisalsodisplayed)under“…Calibration/adjustment:CAL key function.“
– Block/Unblockexternaladjustmentunder“…Calibration/adjustment:Activate ext. adj..“
– Altitudeandlatitudeorgravitationalaccelerationdisplayedafter“Cal“isdisplayedatthestartofthecalibration/adjustmentprocessifthesevaluesaresupportedbytheweighingplatformunder“Device parameters:Operating parameters: Display geogr. data.“Foreachoftheseparameters,thetermisdisplayedfirst(Altitude,LatitudeorGravity)for1second,andthenthecorrespondingvalueisdisplayedcontinuouslyuntilyoupressJ.
OperatingInstructionsCombicsCompleteScales 87
Operation
External calibration and manual adjustment with default weights (weighing parameters: factory settings)
Preparation t SelectSetupmenu:PresstheMkey.t SelectDeviceparameters:Pressthe“O“softkey.t Selectweighingplatform“WP 1,““WP 2:“Pressthe“O“softkeyort Selectinterface“COM 1,““COM 2“or“UNICOM“(dependingonthe
interface):Pressthe“O“softkey.t Selectweighingplatform“WP 3:“Pressthe“O“softkey.
Calibration/Adjustment CALkeyfunction o Ext.cal./adj.;factory-def.wt. Ext.cal./adj.;user-definedwt. Keyblocked Cal./adj.sequence Cal.thenautoadj. o Cal.thenmanualadj. isoCALfunction(forSartoriusISweighingplatformsonly) o Off Adjustmentprompt Activateext.adj. o Activated Deactivated Parameterforexternalweight
o=Factorysetting
t TosavesettingsandexittheSetupmenu:PresstheMkeyorthe“oo“softkey.
Procedure t Zeroingthescalebypressingthe(key.
t Startcalibration/adjustmentusingtheJkey.
C.EXT.DC.EXT.DEF.
12
y Thedisplay“C.EXT.D“appearsfortwoseconds.
y Youarepromptedtoplacetherequiredcalibration/adjustmentweightontheplatform(e.g.,10,000g).
88 OperatingInstructionsCombicsCompleteScales
Operation
t Placethecalibration/adjustmentweightontheweighingplatform.
y Thedifferencebetweenthemeasuredvalueandthetrueweightofthesamplewillbedisplayedwithplus/minussigns.
External calibrationNom. + 10000 gDiff. + 1 g
y Aprintoutwillbegeneratediftheadjustmentisnotcarriedoutandtheprocedureisstoppedbypressingthe(key.
t StartadjustmentviatheJkey(cancelcalibration/adjustmentvia().y Theadjustmentweightisdisplayedonceadjustmentisfinished.
--------------------24.10.2010 10:15Type CAIS3Vers.no. 1.02.101110BVers. 01-63-02--------------------External calibrationNom. + 10000 gDiff. + 1 gExternal adjustmentDiff. + 0 g--------------------24.10.2010 10:15Name:
--------------------
y AGMP-compliantprintoutisgenerated.
OperatingInstructionsCombicsCompleteScales 89
Operation
Internal adjustment for CAH Models... System Requirements – Themenuitem“Intern. cal./adjust.“ispresetforscaleswith
internaladjustment. – Thescalehousinghasabuilt-inmotorizedadjustmentweight. – Thecalibration/adjustmentsequenceispresettomanualadjustmentinthe
“Calibration/adjustment:Cal/adj. sequence: Cal. with manual adjust.,“seesection“FunctionAllocationoftheJKeyforCalibration/Adjustment“
Example: Internal calibration and then adjustment(weighingparameters:factorysettingsforCAH...models)
Procedure t Pressthe(keytounloadandzerothescale.
t PressJtostarttheinternalcalibration.
C.INTERC.EXT.DEF.C.Inter
y Thedisplay“C.INTER“appearswhiletheinternaladjustmentweightisplacedontheplatform.
CIC.EXT.DEF.Just.-Intern
y Thenthedisplay“CI“appears.
y Afterabriefpause,thedifferencesincethelastspanadjustmentisdisplayed.
t PressJtostartinternaladjustmentorpress(tocancelthecalibration/adjustment.
y Whencalibration/adjustmentiscomplete,theGMP-compliantprintoutisgenerated.Iftheadjustmentprocedureiscanceled(onlycalibrationisperformed),thelasttwolines,“Internaladjustment”and“Diff.+0.000kg”arenotprinted.
y Thedeviceisnowinnormalweighingmode.
90 OperatingInstructionsCombicsCompleteScales
Operation
SQmin Function
Purpose Todisplaytheallowableminimumsamplequantity“SQmin”(samplequantityminimum)inaccordancewiththeUnitedStatesPharmacopoeia(USP).AccordingtoUSPguidelines,theuncertaintyofmeasurementmaynotexceed0.1%ofthesamplequantitywhensubstancesareweighedwiththehighestdegreeofaccuracyforvolumedetermination.Thisadditionalfunctionensuresthatweighingresultsliewithindefinedtolerancelimitscorrespondingtotherequirementsofyourqualityassurancesystem.
System Requirements ThescalemustbesetupbyaservicetechniciantobeabletousetheSQminfunction.ThetechnicianwilldeterminethepermittedminimumsamplequantityandsetthisonyourbalanceusingyourQAsystem‘sguidelines.Hewilldocumentthissettingviaa“WeighingmoduletestasperUSP“certificateinwhichthemeasurementsandmin.samplequantityarelogged.TheSQminfunctionensuresthattheweighingresultscorrespondtoUSPguidelines.TheseSQminsettingscannotbechangedbytheuser.
Features – Displayingtheminimumsamplequality:Thevalueisdisplayedinthetextlinefor4secondsafterpressingthekkey.
– Iftheminimumsamplequantityhasnotbeenreached:Theksymbolisdisplayedandweightvaluesaremarkedwitha“!“intheprintout.
– GLPheader:TheminimumsamplequantityenteredforSQmincanbeincludedontheprintout.
OperatingInstructionsCombicsCompleteScales 91
Operation
SQmin Operation
Configuration in Service Mode TheSQminvaluecanonlybeenteredinServicemode.t Removethecap.t Slidethemenuaccessswitchtotheleft(=“open“position). Ifthedeviceispartofaverifiedweighingfacility,thiswillonlybepossibleifthe
verificationsealisbroken.Theweighingequipmentmustthenbeverifiedagain.t ActivatetheServicemode,see“ServiceMode.“t Inthe“Device parameters“menu,select“SQmin“andopen
usingthe“O“softkey. t Select“SQmin input“usingthe“O“softkey.
t Select“SQmin WP1“usingthe“O“softkey,enterthevalueviathekeypad(inthisexample0.100kg)andsaveusingthe“l“softkeyorcancelusing“ESC.“t ThenenterthevaluesforWP2andWP3.t PressM or“oo“toexittheSetupmenu.t Slidethemenuaccessswitchtotheright(=“closed“position)andreattachthe
cap.y Thedeviceisnowinnormalweighingmode.
Configuration in Weighing Mode t Inthe“Device parameters“menu,select“SQmin“andopenusingthe“O“softkey.
t Select“Display.“.t Openusingthe“O“softkey.t Confirmthefactorysetting“oYes“usingthe“l“softkey.t Pressthe“o“softkeyseveraltimestoswitchtothenexthighestmenu.
TheSQmindisplaymustbeturnedontousetheSQminfunction.
t Inthe“Fn key:SQmin display:“menu,selectusingthe“O“softkeyandconfirmusingthe“l“softkey.
t PressM or“oo“toexittheSetupmenu.
92 OperatingInstructionsCombicsCompleteScales
Operation
Procedure t Placethecontainerforthesampleonthescaleandpressthe)keytotare.
t Placethesampleonthescale.y Theminimumsamplequantityisnotreached(symbolk).t Pressthepkeytogeneratetheprintout.
t Placeanothersampleonthescale.y Theminimumsamplequantityisexceeded(nosymbolk).t Pressthepkeytogeneratetheprintout.
t BrieflypressthekkeytotogglebetweenthemeasuredvalueandSQminvalue.
y Thevaluefortheminimumsamplequantityisdisplayedforfourseconds.
OperatingInstructionsCombicsCompleteScales 93
Operation
Data ID Codes
Youcanassigncodes(suchasproductname,batchnumber,etc.)foridentificationofmeasuredvaluesinallapplicationprograms.
Features – AssignuptosixIDcodes.– AssignbothanameandavaluetoeachIDcode.– DisplayingindividualIDs:pressthe“ID“softkey.– Thenameisleft-justifiedandthevalueisright-justifiedontheprintout.Ifthe
entirecodeistoolongforoneline,additionallinesareprinted.– EnterIDcodenamesinSetupunder:“Device
parameters:Config. printout:ID codes.“– Thenamecanhaveamax.of20characters.WhenenteringtheIDvalue,no
morethan11charactersaredisplayedduringinput;however,all20charactersareprinted.
– Enterupto21charactersforthevalueoftheIDcode.Pressthe“ID“softkeytoactivatetheinputmode.
– EnterthefirstIDvaluedirectlythroughthenumerickeypad.Pressthe“1st ID“softkeytosavethevalue.
– IndividualcharactersoftheIDcanbedeletedusingthe(key.CompleteIDcodevaluescanbedeletedusingthe“Delete“softkey.
– Ifboththenameandvaluefieldsareempty,noIDcodeisprinted.– IntheSetupmenu,youcanconfigurewhenandwhetherIDcodesareprinted
(seeincluded“ApplicationPrograms“instructions,“ConfiguringPrintouts“).
Settings for individual ID codes Setupmenu: “Device parameters:Config. printout:
FactorysettingsforIDcodenames: ID1:“ID1“ID2:“ID2“ID3:“ID3“ID4:“ID4“ID5:“ID5“ID6:“ID6“
TherearenofactorysettingsforIDcodevalues.
94 OperatingInstructionsCombicsCompleteScales
Operation
Using Individual ID Code
Example EnterIDcodenames.“Batchno.“and“Customer“shouldbeenteredforID1andID2.
t PresstheMkeyandselect“Device parameters:Config. printout:ID codes.“
y Thefirstlineisselected.
t Presstheakeytoenter“Batchno.“viathekeypad,seealsochapter“OperatingDesign,“sections“TextInputviatheKeypad“and“SpecialCharacterInputviatheKeypad.“
t Pressthe“l“softkeytosavetheentry.t Pressthe“q“softkeytoselectthesecondline.t Presstheakeytoenter“Customer“viathekeypad,seealso“Operating
Design,““TextInputviatheKeypad.“t Pressthe“l“softkeytosavetheentry.t PressM or“oo“toexittheSetupmenu.
Example EnterIDcodevalues.Thevalues“123456“and“Smith“shouldbeenteredforID1
andID2.t Pressthe“ID“softkey.
y Thefirstlineisselected.
t Pressthekeytoenter“123456“viathekeypad,seealso“OperatingDesign,““NumberInputviatheKeypad.“
t Pressthe“l“softkeytosavetheentry.
t Pressthe“q“softkeytoselectthesecondline.t Presstheakeytoenter“Smith“viathekeypad,seealso“OperatingDesign,“
“TextInputviatheKeypad.“t Pressthe“l“softkeytosavetheentry.t Pressthe“oo“softkeytoexitthemenu.
OperatingInstructionsCombicsCompleteScales 95
Operation
DataInterfacesTheindicatorisequippedwiththefollowingdatainterfaces:– COM1:Standarddatainterface(RS-232)– COM2:Standarddatainterface(RS-232)– UniCOM:Universaldatainterface(optional)
InterfacescanbeconfiguredintheSetupmenufordifferentinputandoutputfunctions(e.g.printer,3rdweighingplatform,PC,checkweighing).TheoptionalUniCOMinterfacecanbeusedasanRS-232,RS-485/RS-422oranalogoutput(voltage/currentinterface,galvanicallyseparateddigitalI/Os,profibus,Ethernet),seealso“Accessories.“AbarcodescannerorakeyboardcanbeconnectedviathePS/2-socketorthecorrespondingscrewterminals(IP69K).
Features – IP44indicator:Connectviaa25-pinD-Subfemaleconnector
– IP69Kindicator:Routetheconnectingcablefromtheperipheraldevicetotheindicatorviaacablegland.Thefreecableendsareconnectedviathescrewterminals.
3
Warning when using third-party RS-232 connecting cables: ThepinassignmentsmaynotbecompatiblewithSartoriusequipment.
Checkthepinassignmentagainstthecablingdiagramsanddisconnectanylinesthatarenotassigned.Failuretodosomaycausemalfunction,damageorevencompletelyruinyourindicatorand/orperipheraldevice(s).
96 OperatingInstructionsCombicsCompleteScales
DataInterfaces
Specifications
Serial interface: Interfaceoperatingmode: Fullduplex
Level: COM1: RS-232, COM2: RS-232, UniCOM(optional): RS-232or RS-422/485halfduplex
Connection: CAW*Pdevices(IP44protection): 25-pinD-Subsocket CAW*Sdevices(IP69Kprotection): Connectionviascrewterminalsinthehousing,
cableroutedintothehousingviaacablegland.
Transmissionrate: 150,300,600,1200,2400,4800,9600,19200baud(dependingontheoperatingmode)
Numberofdatabits: 7,8bits
Parity: Space,odd,even,none(dependingontheoperatingmode)
Numberofstopbits: 1or2
Handshakemode: Software(XON/XOFF),hardware(1characterafterCTS)
Protocols: SBI,XBPI-2322),XBPI-4851)2),SMA,Profibus(UniCOMonly)variousprinters: –YDP01IS –YDP02ISlabel –YDP01ISlabel –Universal–YDP02 –YDP04IS –YDP03 –YDP04ISlabel –YDP02IS –YAM01ISAlibimemory
Networkaddress3): 0,1,2,...,31
SBI:Manualdataoutput: Withoutstability,afterstability,configurableprintout
SBI:Auto.dataoutput: Withoutstability,atstability,atuser-definedintervals
SBI:Outputformat: 16or22characters
Printoutofapplicationdata: Outputofaconfigurableprintout
Analog UniCOM interface (optional) Level: 4…20mA,0…20mA,0…5V
Powersupply: Internalorexternal
Factorysetting: 4...20mA,internalpowersupply
Connection: CAISL3devices(IP44): 25-pinD-Subsocket CAIS3devices(IP69K): Connectionviascrewterminalsinthehousing,
cableroutedintothehousingviaacablegland.
1)OptionalUniCOMuniversaldatainterface2)xBPIoperatingmode:9600baud,8databits,parity:odd,1stopbit3)NetworkaddressisvalidonlyinxBPI-RS-485operatingmode
OperatingInstructionsCombicsCompleteScales 97
DataInterfaces
Connection Options
3Youmayneedtouseanexternalpowersupplytooperateperipheraldevices.
Preparation Seechapter“GettingStarted,“sections“COM1PinAssignmentChart,“COM2PinAssignmentChart,““PS2PinAssignmentChart“forpinassignmentsandcablingdiagrams.
Printer Connection Options ThefollowingprinterscanbeconnectedtothestandardCOM1andCOM2interfacesortheoptionalUniCOMuniversalinterface:– YDP20(user-definedinterfaceparameters)– YDP14IS(striporlabelprinter)– YDP04IS(striporlabelprinter)– Universalprinter(user-definabletransmissionparameters)
Device Connection Options Inaddition,thefollowingdevicescanbeconnectedtothestandardCOM1andCOM2interfaces:– Foot/Handswitch,COM1only– Secondprinter– Remotedisplay– PC(RS-232interface)– Thirdweighingplatform(RS-232interface)– Externalcheckweighingdisplay(stoplight)viaadigitalI/O(Sartoriusstandard),
COM1only– ToPS2:Barcodescanner/Externalkeyboard
Thefollowingdevicescanbeconnectedtotheoptional UniCOMuniversalinterface:– WP3RS-232/RS-485– PC(RS-232interface)– Secondprinter(externalpowersourcerequired)– Remotedisplay– DigitalI/O– Currentinterface(0/4...20mA),voltage(0...10V)– PLCwithProfibusDP– Ethernet
Connection Options for other Weighing Platforms TheCombics3modelenablesyoutoconnecta2ndor3rdweighingplatform.
YoucanuseboththeCOM1,COM2ortheUniCOMport.ThestandardCOM1andCOM2portisoperatedinRS-232mode.Thefollowingmodesareavailablefora3rdweighingplatform:– SBI– IS-232(factorysetting)– ADC-232
Operating Modes UniCOMinterfacescanbeoperatedineithertheRS-232orRS-485mode.Thethirdweighingplatformcanbeoperatedinanyofthefollowingmodes:– SBI(RS-232mode)– IS-232(RS-232mode)– ADC-232(RS-232mode)– IS-485(RS-485mode,xBPImode,factorysetting)– ADC-485(RS-485mode)ThestandardCOM1andCOM2portsortheoptionaluniversalUniCOMinterfacecanbeusedasaprinterinterface.
98 OperatingInstructionsCombicsCompleteScales
DataInterfaces
Configuring the Data Interface as a COM Port
ForoperationasaCOMport,youcanadaptdatarecordstothefollowingoperatingmodes:– SBI(factorysetting)– XBPI-232– XBPI-485– SMA
COM1 oOff WP3 RS-232 SBIstandardversion SBItradeversion
(forlegalmetrology) oIS-232 ADC-232 Data oSBI communication XBPI-232 SMA
Printer11) YDP20 or YDPO4IS oStrip Printer21) Label Universal(printer) YDP04IS oStrip Label Label,man.formfeed
COM2 oOff WP3 RS-232 SBIstandardversion (9600baud) SBItradeversion
(forlegalmetrology) oIS-232 ADC-232 Data oSBI communication XBPI-232 SMA
Printer11) YDP20 or YDPO4IS oStrip Printer21) Label Universal(printer) YDP04IS oStrip Label Label,man.formfeed
UNICOM oOff(option) WP3 RS232 RS485
Data oSBI communication XBPI-232 XBPI-485 SMA Profibus Ethernet
Printer11) seeCOM2 or Printer21) Analogoutput ExternalMulti-I/Oconverter
oFactorysetting1)Max.2printerscanbeconfigured
OperatingInstructionsCombicsCompleteScales 99
DataInterfaces
Setting the SBI Data Output
DataoutputsettingscanbemadeintheSetupmenuunder“Data communications:SBI:Data output.“Thefollowingoptionsareavailable:– Thedisplayedvalue,withorwithoutstabilitycheck– Automaticoutputofthedisplayedvalue,eitherwithorwithoutstabilitycheck,
orautomaticallyatdefinedintervals– Outputofaprintoutasconfiguredinthe“Device parameters:
Config. printout:Printer 1“or“Printer 2“(seenextpage).
Youcandefinetheprintoutcontentbyspecifyingwhichblocksofinformationaretobeincluded(see“ConfiguringPrintouts”).Ingeneral,thecurrentdisplayvalueisoutput(weightwithunit,calculatedvalue,alphanumericdisplay)unlessyouconfigureauser-definabledatarecord.Generally,dataisoutputonlyaftertheweighinginstrumenthasstabilized(factorysetting).Hereyoucandefinewhetherdataisoutputonrequestorautomatically,atstabilityorwithoutstabilitycheck;andconfigureauser-definedprintout.Thedataoutputfor“withoutstability“mustbesetaccordingly(SBI:Dataoutput).Ifyouselecttime-dependentautomaticprintout,youneedtodefinetheprintinterval(indisplayupdates)aswell.Eachlineofaprintoutcancontainupto20characters.Thefirst6characters,calledthe“dataheader”,identifythesubsequentvalue.Only14charactersareavailableifyoudisabletheheader.Thisiscarriedoutinthe“Lineformat“menuitem(seealso“SetupOverview“in“Configuration“).
Automatic Data Output (SBI) Youcanhavetheweightreadoutprintedautomatically1).Thisprintoutcanbegeneratedafteracertainnumberofdisplayupdates2).Youcanalsoconfigurewhetherornottheauto-printfunctionisdependentonthestabilityofthescale3).Thedisplayupdatefrequencydependsonboththescalemodelandtheoperatingstatus.Examples:
N + 153.00 g Netweight Stat Displayblank Stat L Displayunderload Stat H Displayoverload
„Dataoutput“setting:1)3) Automatic,withoutstabilityorautomaticwithstability.
Factorysetting:Manualafterstability;i.e.,automaticdataoutputfunctionoff.2) Time-dependentautomaticdataoutput:
Interval:1,2,10or100displayupdatesFactorysetting:1displayupdate
100 OperatingInstructionsCombicsCompleteScales
DataInterfaces
Data Input Format
Youcanconnectacomputertoyourscaletosendcommandscontrollingweighinginstrumentfunctionsandapplicationsviatheinterfaceport.Allcommandsusethesamedatainputformat.TheybeginwiththeESC(ASCII:27)characterandendwithacarriagereturnCR(ASCII:13)andLF(ASCII:10).Thetotallengthofacommandisanywherefrom4characters(1commandcharacterbetweenthestartandenddescribedabove)toamax.of7characters(4commandcharacters).Thisnumbercanalsobehigherwhensendingtexts.ThecommandslistedinthefollowingtablemusteachbesupplementedwithESC...CRLF.
Example Thecommandcharacterforoutputis“P“(“outputtoPort“).Totriggerthiscommand,sendthestring:“ESCPCRLF”.
Command MeaningK Weighingmode1L Weighingmode2M Weighingmode3N Weighingmode4O BlockkeysP SenddisplayvaluetodatainterfaceQ OutputacousticsignalR UnblockkeysD Tareandzero (combinationtarefunction)f3_ Zero(seealsothe“kZE_”command)f4_ Tarewithoutzeroing(seealsothe“kT_”command)i_ Informationabouttheindicator,exampleofoutput:“CAI/016302/1“
Meaning:Indicator:Combics3,softwareversion:016302,Activeweighingplatform:1
kF1_ TriggersoftkeyF1functionkF2_ TriggersoftkeyF2functionkF3_ TriggersoftkeyF3functionkF4_ TriggersoftkeyF4functionkF5_ TriggersoftkeyF5functionkF6_ TriggerRkeyfunctionkF7_ TriggerHkeyfunctionkF8_ TriggerDkeyfunctionkF9_ TriggerkkeyfunctionkF10_ TriggerJkeyfunctionkF11_ TriggerKkeyfunctionkF12_ TriggerLkeyfunctionkP_ Triggerpkeyfunction(printatprinterinterface)kT_ TriggerTkey(tare)kNW_ Triggernkeyfunction(toggletheweighingplatform)kZE_ Trigger(keyfunction(zerotheinstrument)kCF_ Triggerckeyfunctionx1_ Outputmodeldesignationofactiveweighingplatform,example:“LP6200S-0C“x2_ Outputserialnumberofactiveweighingplatform,example:“0012345678“x3_ Outputsoftwareversionofactiveweighingplatform,example:“00-43-04“x4_ Outputsoftwareversionofindicator,example:“01-63-02“x9_ Outputserialnumberofindicator,example:“0012345678“x10_ Outputmodelofindicator,example:“CAIS3“z1_ Input:printoutheader1z2_ Input:printoutheader2
TheASCIIcodeforthe“underline”character(“_”)is95.Formatforenteringprintoutheaderlines:“ESCzxa...a_CRLF“withx=1or2anda...a:1to20charactersforheaderx,followedbytheunderline,CRandLFcharacters.txx…x_ Writetextindisplay.xx…xisthetexttobedisplayed.
OperatingInstructionsCombicsCompleteScales 101
DataInterfaces
Data Output Format
Youcanoutputthevaluedisplayedinthemeasuredvaluelineandtheweightunit,withorwithoutadataIDcode.WhetherthedataIDcodeisincludedintheoutputdependsonyoursettingsunder“LineFormat.“
Examples + 235 pcs withoutIDcodeQnt + 235 pcs withIDcode“LineFormat“settings:Forrawdata(16characters):withoutheader,forotherapps.(22characters):with“header“(factorysetting).
Data Output Format with 16 Characters Displaysegmentsthatarenotactivatedareoutputasspaces.Valueswithnodecimalpointareoutputwithoutadecimalpoint.The type of character that can be output depends on the character’s position: Normal OperationPosition 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
+ * A A A A A A A A * E E E CR LF
or – * A A A A A A A A * E E E CR LF
or * * * * * * * * * * * * * CR LF
+-: Signs;the“+“signcanbehiddenunder“Device parameters: COMx:Data communications:SBI:Sign format.“
*: SpaceA: Digitorletter(max.7charactersplusdecimalpoint)E: Unitsymbol1)(1to3lettersfollowedby2-0spaces)CR: CarriagereturnLF: Linefeed
Special CodesPosition 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
* * * * * * – – * * * * * * CR LF
or * * * * * * H * * * * * * * CR LF
or * * * * * * H H * * * * * * CR LF
or * * * * * * L * * * * * * * CR LF
or * * * * * * L L * * * * * * CR LF
or * * * * * * L * * * * * * * CR LF
*: Space––: FinalreadoutH: OverloadHH: OverloadincheckweighingL: UnderweightLL: UnderweightincheckweighingC: Calibration/Adjustment
Error MessagesPosition 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
* * * E r r * * # # * * * * CR LF
* * * E r r * * # # # * * * CR LF
*: Space#: Number(2or3digiterrornumber)
1) Basedonthemodeltype,e.g.notallunitsareavailableforuseinlegalmetrology
102 OperatingInstructionsCombicsCompleteScales
DataInterfaces
Outputoftheweightvalue+1255.7g
Position 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 + * * * 1 2 5 5 . 7 * g * * CR LF
Position1: Plus+,orminus-orspacePosition2: SpacePositions3-10: Weightvaluewithdecimalpoint;leadingzerosareoutputas
spaces.Position11: SpacePositions12-14: Charactersforunitofmeasure,spaceor!signasasymbolPosition15: CarriagereturnPosition16: Linefeed
Data Output Format with 22 Characters
WhendataisoutputwithanIDcode,the6-charactercodeprecedesthe16-characterstringdescribedabove.Thesesixcharactersidentifythesubsequentvalue.
Normal Operation1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
K K K K K K + A A A A A A A A A * E E E CR LF
K K K K K K - A A A A A A A A A * E E E CR LF
* * * * * * * * * * * * * * * * * * * * CR LF
K: IDcodecharacter,right-justifiedwithspaces+-: Plusorminussign*: SpaceA: Digitorletter(max.7charactersplusdecimalpoint)E: Measurementunitsymbol1)(1to3lettersfollowedby2-0spaces)CR: CarriagereturnLF: Linefeed
Special Codes1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
S t a t * * * * * * * * - - * * * * * * CR LF
S t a t * * * * * * * * H * * * * * * * CR LF
S t a t * * * * * * * * H H * * * * * * CRLF
S t a t * * * * * * * * L * * * * * * * CR LF
S t a t * * * * * * * * L L * * * * * * CR LF
S t a t * * * * * * * * C * * * * * * * CR LF
*: Space––: FinalreadoutH: OverloadHH: OverloadincheckweighingL: UnderweightLL: UnderweightincheckweighingC: Calibration/Adjustment
1)Basedonthemodeltype,e.g.notallunitsareavailableforuseinlegalmetrology
OperatingInstructionsCombicsCompleteScales 103
DataInterfaces
ErrorMessage
12 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
St a t * * * * * S r r * * # # * * * * CR LF
St a t * * * * * S r r * # # # * * * * CR LF
*: Space#: Number(2or3digiterrornumber)
104 OperatingInstructionsCombicsCompleteScales
DataInterfaces
G# Grossvalue
N Netvalue
T Applicationtarememory1
T2 Applicationtarememory2
Diff Differencefromcalibrationvalue
Targ. Exactadjustmentweightvalue
Nom. ExactcalibrationweightforSBIprotocoloutput
nRef Referencesamplequantity
pRef Percentageofreference
wRef Referencepieceweight
Qnt ResultfromCountingapplicationResultfromCounting(piececount)andNeutralMeasurementapplications
mDef Targetvalueforanimalweighing
x-Net Animalweighingresults
Setp Targetvalueforcheckweighing
Diff.W Absolutedifference(e.g.,inkg)inCheckweighing
Lim Deviationin%inCheckweighing
Max Uppertoleranceforcheckw.
Min Min.toleranceforcheckw.
Stat Status
Classx Classification,classx
Limx Classlimit
D Percentage(asloss)
Prc Percentage(asresidue)
Wxx% Referencepercentageweight
Cmpxxx Componentxxx
Cont.T ContentsofthetarememoryinNet-totalFormulation
S-Comp TotalofinitialweighingsforNet-totalFormulation
PT2 Presettare
n Transactioncounter
*G SumofgrossweightsinTotalizing
*N SumofnetweightsinTotalizing
Ser.no Serialnumberoftheplatformorindicato
Example:Outputoftheweightvalue+1255.7g1 2 3 4 5 6 7 8 9 10 11 12 1314 15 1617 1819 20 21 22G # * * * * + * * * 1 2 5 5 . 7 * g * * CR LF
Position1-6: IDcode,right-justifiedwithspacesPosition7: Plus+,orminus-orspacePosition8: SpacePositions9-16: Weightvaluewithdecimalpoint;leadingzerosareoutputas
spaces(acommacanalsobesetinsteadofadecimalpoint).Position17: SpacePositions18-20:Charactersforunitofmeasure,spaceor!signasasymbolPosition21: CarriagereturnPosition22: Linefeed
h Iftheweightvalueisoutputwith10-foldincreasedresolution,thisvalueisnotpermittedtobeprintedorsavedinaweighinginstrumentoperatedinlegalmetrologyintheSBImode.Inthiscase,theunitsymbolisnotincludedwithoutput.
External Keyboard Functions (PC Keyboard)
Forsettings,gototheSetupmenuunder“Device parameters: Bar code:External keyboard.“ThealphanumerickeycodesimplementedherearespecifictotheGermankeyboardlayout.Thefollowingalphanumericcharactersareused(somerequirethe“Shift”key):a-z,A-Z,0-9,<space>,andthesecharacters:,.\+’<>/»$@%/();=:_?*
Functionkeys:PC keyboard Combics 3F1 )keyF2 (keyF3 nkeyF4 F5softkey(farleft)F5 F4softkey(secondfromleft)F6 F3softkey(middle)F7 F2softkey(secondfromright)F8 F1softkey(farright)F9 DkeyF10 Dkey-long(infofunction)F11 HkeyF12 kkeyPrint pkeyReturn F1softkey(farright)Cursorup F3softkey(middle)Cursorleft F4softkey(secondfromleft)Cursordown F2softkey(secondfromright)Cursorright F1softkey(farright)Pos1 c keyBackspace ckeyESC ckey
OperatingInstructionsCombicsCompleteScales 105
DataInterfaces
Configuring the Data Interface as a Printer Port
DeviceParameters Config.printout Headers Line1: Line2:
Identifiers ID1: ID2: ID3: ID4:
ISO/GMP oOff Protocol Forseveralapplicationresults
Date/ oDatewithtime Time Dateonly
Onceat Stability2) oOff On
FlexPrint oOff On
Printer1 Numberof printouts o1printout 2printouts
Single oMax.30printitems printout1) canbeselected oID1,...ID4
Component/ oMax.30printitems Printout1) canbeselected
Totaldata Max.30printitems printout canbeselected
Printer2 asforPrinter1
Factorysetting Printout Reset Donotreset
o Factorysetting1) Multipleselectionspossible2) Whentheminimumloadisexceeded(canbesetundermenuitem: “Applicationparameters:...:Min.loadforautom.taring“)
106 OperatingInstructionsCombicsCompleteScales
DataInterfaces
Thereareseveralactionsthatgeneratethecommandforoutputtingdatatotheprinterport:– Pressingthepkey.
Iftheoperatingmenuisactive,allmenusettingsundertheactivemenulevelareprinted.
– Insomeapplications,pressingagivenkey(e.g.,tosaveavalueorstartaroutine)alsogeneratesaprintcommand,oritisgeneratedautomaticallydependingontheapplicationconfiguration.Inthiscase,aconfigurableprintoutisgeneratedwithapplication-specificdata.
ThePandlsymbolsaredisplayedwhendataisbeingoutputtotheprinterport.
Configuring a Printout
AprintoutcanbeconfiguredintheSetupmenuunder“Device parameters:Config. printout.“Thisshouldbecarriedoutafterconfiguringtheapplicationsincesomedataintheprintoutisapplication-dependent.Youcanconfigureaseparateprintoutforeachinterface.Eachprintoutiscomprisedofdifferentinformationblocksthatcanbeactivatedordeactivatedviamultipleselectioninthemenu.Forthe“Totalizing“and“Net-totalFormulation“applications,thetotalizing/resultsprintoutcanbeconfiguredindependentoftheindividual/componentprintout.Theindividualinformationblocksareshownbelowwithdetailedexplanations.Samplesofcompleteprintoutsareprovidedfollowingtheendofthissection.
Headers 2headerseachwithamax.of20charactersareavailable(e.g.forprintingthecompanyname).Printimageexample:ACE HARDWARE
GOETTINGEN
Date/Time Printimageexample: 21.01.2010 16:02
Tomaintainauniformtime(e.g.fordocumentationwithinacompleteautomaticsystem),theprintingofthetimecanbesuppressedin“Device parameters:Config. printout:Date/time.“Whenyouset“Date only,“thetimecanbeadded,e.g.fromasuperordinatecontrolinordertoalwayshavethesametimethroughoutthesystem.ThissettingismainlydesignedforcommunicationwithaPC.
Identifiers Usethe“ID“softkeytoentertextinthenamedIDsviathekeypad.
OperatingInstructionsCombicsCompleteScales 107
DataInterfaces
Application Initialization Data Whichdataisincludedinthisblockdependsontheactiveapplication.Inthe“Counting“application,forexample,thereferencesamplequantityandreferenceweightareprinted(plusablankline).
nRef 10 pcs “Counting“printblockexample: wRef + 0.035 kg
Scale Identification Ser.no. 1234567890 Printimageexampleforweighingplatformserialnumber:
Scale Identification Thiscontentisapplication-dependent.Ifprovidedintheapplication,thegross,netandtareweightsareusuallyprinted,followedbyablankline.Thisblockisterminatedbyadottedline.
G# + 1.402 kg “Counting“applicationprintimageexample: T + 0.200 kg
N + 1.202 kg
Qnt 34 pcs
--------------------
GMP-compliant printouts
Whenthisfunction,theprintoutissupplementedwithaGMPheaderandaGMPfooter(GMP:“GoodManufacturingPractice”).IftheGMP-compliantprintoutisactivated,theAsymbolremainsdisplayeduntiltheGMPfooterisprinted.Setting:Setupmenuunder“Device parameters:Config. printout:ISO/GLP/GMP- printout.“
Youcanchoosefromthefollowingsettings:– GMP-compliantprintoutoff(factorysetting)– GMP-compliantprintoutformultipleapplicationresults
TheGMPheaderisincludedfromthefirstprintoutgeneratedsubsequenttotheactivationoftheGMPprintout.TheGMPfooterisprintedafterseveralmeasurementresultsbypressingandholdingthepkey,e.g.forcomponentprinting(menuitem“Formultipleapplicationresults“).Inthiscase,theTsymbolremainsvisibleuntiltheGMPfooterisprinted.IfyoutoggletoadifferentplatformwhileaGMPprintoutofseveralmeasuredresultsisbeinggenerated,theGMPfooterfortheplatformuseduptothatpointisgeneratedwhenyoupressthenkey.TheGMPheaderfortheotherplatformisincludedonthenextprintoutgenerated.AGMP-compliantprintoutisgeneratedautomaticallyattheconclusionofcalibration/adjustmentandlinearizationroutines,aswellaswhenyousetordeleteapreload.IfyouusealabelprinterforGMP-compliantprintouts,youmayfindthatasinglelabelisnotlongenoughforthedataprinted.Ifthisisthecase,youcanactivatetheautomaticformfeedaftereachprintoutofaGMPheaderandmeasurementresults.ThefollowingprovidessampleGMPheadersandfooters(see“SamplePrintouts“).
108 OperatingInstructionsCombicsCompleteScales
DataInterfaces
Sample Printouts
Fordetailsontheindividualinformationblocks,see“ConfiguringPrintouts.”Fordetailsonconfiguringtheheaderlines,refertothechapteroftherespectiveapplication.
“Weighing” Application The“Applicationinitializationdata“informationblockisempty.Ifselected,anemptylinewillbeprinted.
HEADER LINE1
HEADER LINE2
14.01.2010 09:43
--------------------
Ser.no. 80705337
G# + 1.402 kg
T + 0.200 kg
N + 1.202 kg
--------------------
-------------------- DisplaywithIDandweighingplatform:
Ser.no. 80705337
G# + 1.402 kg
T + 0.200 kg
N + 1.202 kg
--------------------
“Counting” Application Theinitializationdatablockcontainsthereferencesamplequantityandthereferencesampleweight.
--------------------
nRef 10 pcs
wRef + 0.035 kg
G# + 1.402 kg Theresultsblockcontainsgross,netandtareweightT + 0.212 kg
N + 1.190 kg
Qnt 34 pcs andthepiececountasaresult.--------------------
OperatingInstructionsCombicsCompleteScales 109
DataInterfaces
“Neutral Measurement” Application Theinitializationdatablockcontainsthereferencesamplequantityandreferenceweight.
--------------------
Ref 2 o
wRef + 1.200 kg
G# + 14.700 kg Theresultsblockcontainsgross,netandtareweightT + 0.300 kg
N + 14.400 kg
Qnt 12 o andthepiececountasaresult.--------------------
“Weighing in Percent” Application Theinitializationdatablockcontainsthereferencepercentageandreferenceweight.
-------------------- Percentage = residual pRef 100 %
Wxx% + 2.100 kg
G# + 1.859 kg Theresultsblockcontainsgross,netandtareweights,aswellasthepercentage,T + 0.200 kg whichisshownaseitherthelossortheresidualamount.N + 1.659 kg
Prc 79 % andthepiececountasaresult.--------------------
-------------------- Percentage = losspRef 100 %
Wxx% + 2.100 kg
G# + 0.641 kg Theresultsblockcontainsgross,netandtareweightT + 0.200 kg
N + 0.441 kg
D 21 % andthepiececountasaresult.--------------------
110 OperatingInstructionsCombicsCompleteScales
DataInterfaces
“Checkweighing” Application Theinitializationdatablockcontainsthetargetweight,theminimumandmaximumload.Theresultsblockalwayscontainsthegross,netandtareweight.Additionalresultscanbeprintedin2differentdisplaytypes:andthepiececountasaresult.– Weightdisplay: IntheOKandnonconformingrange,thedeviationfromthetargetweight
isalwaysprintedasapercentageandabsolutedeviation.
– Relationtotargetvalue: IntheOKrange,thedeviationfromthetargetweightisprintedasapercentage
andabsolutedeviation.Inthenonconformingrange,“HH“isprintedforexceedingtheweightand“LL“forfallingbelowtheweight.
OKrangeintheweightandtolerancelimitdisplay
-------------------- NonconformingrangeintheweightdisplaySetp + 1.300 kg
Min + 1.235 kg
Max + 1.365 kg
G# + 1.312 kg
T + 0.000 kg
N + 1.312 kg
Lim + 0.92 %
Diff.W+ 0.012 kg
--------------------
-------------------- Resultoutside(over)“OK”range;“Threshold”printout:Setp + 1.300 kg
Min + 1.235 kg
Max + 1.365 kg
G# + 1.400 kg
T + 0.000 kg
N + 1.400 kg
Stat HH
--------------------
OperatingInstructionsCombicsCompleteScales 111
DataInterfaces
Componentprintout,examplewith2transactions: HEADER LINE1
HEADER LINE2
14.01.2010 09:43
--------------------
G# + 1.400 kg
T + 0.200 kg
N + 1.200 kg
n 1
G# + 3.400 kg
T + 0.200 kg
N + 3.200 kg
n 2
Examples:print2ndtransaction HEADER LINE1 Individualprintout HEADER LINE2
Completestandardprintoutconfigurationisprintedforeachtransaction.14.01.2010 09:43
--------------------
G# + 2.400 kg
T + 0.200 kg
N + 2.200 kg
n 2
G# + 2.400 kg StandardausdruckT + 0.200 kg Thetransactioncounterisnotprinted.N + 2.200 kg
-------------------- Printmenuparameters:MENU Allactivesub-itemsofthecurrentlydisplayedmenuareprinted. SETUP
WP1
--------------------
1
1.1
1.1.2
1.2.1
1.3.2
...
1.18
1.18.1
CAL.
10.000 kg
etc.
112 OperatingInstructionsCombicsCompleteScales
DataInterfaces
GMP-compliant printouts “Linearization“printout--------------------
14.07.2010 13:00
Type CAIS2
Ser.no. 12345678
Vers. 1.02.101110
BVers. 01-63-01
--------------------
LinearizationWt.1 + 7.00 kg
Wt.2 + 15.00 kg
Wt.3 + 22.00 kg
Wt.4 + 30.00 kg
completed
--------------------
14.07.2010 13:02
Name:
--------------------
Calibration/adjustmentprintout--------------------
14.07.2010 13:50
Type CAIS2
Ser.no. 12345678
Vers. 1.02.101110
BVers. 01-63-01
--------------------
External calibration
Targ. + 30.00 kg
Diff. - 0.03 kg
External adjustment
Diff. + 0.00 kg
--------------------
14.07.2010 13:52
Name:
--------------------
Settingthepreloadprintout--------------------
14.07.2010 13:50
Type CAIS2
Ser.no. 12345678
Vers. 1.02.101110
BVers. 01-63-01
--------------------
Set preload
completed
--------------------
14.07.2010 13:52
Name:
--------------------
OperatingInstructionsCombicsCompleteScales 113
DataInterfaces
Deletingthepreloadprintout--------------------
14.07.2010 13:50
Type CAIS3
Ser.no. 12345678
Vers. 1.02.101110
BVers. 01-63-01
--------------------
Delete preload
completed
--------------------
14.07.2010 13:52
Name:
--------------------
Weighingprintoutwithmultipleresults(example:2results):--------------------
14.07.2010 09:43
Type CAIS3
Ser.no. 12345678
Vers. 1.02.101110
BVers. 01-63-01
--------------------
HEADER LINE1
HEADER LINE2
14.07.2010 09:43
--------------------
G# + 2.40 kg
T + 0.20 kg
N + 2.20 kg
--------------------
HEADER LINE1
HEADER LINE2
14.07.2010 09:44
--------------------
G# + 3.40 kg
T + 0.30 kg
N + 3.10 kg
--------------------
14.07.2010 09:45
Name:
--------------------
114 OperatingInstructionsCombicsCompleteScales
DataInterfaces
Error Codes
Errorsaredividedintothefollowing:– Fatalanddynamicerrorsaredisplayedforthedurationoftheerrorviathe
“ERR“errorcode.– Temporaryerrorsaredisplayedfor2secondsviathe“INF“errorcode;
thentheprogramautomaticallyswitchesbacktonormalweighingoperation.
OperatingInstructionsCombicsCompleteScales 115
ErrorCodes
Display Cause SolutionNodisplayelements Nopowerpresent Checkpowersupply
------- Keyhasnofunctioninthisstatus
Flashingk Batterydefectiveortimechanged Settime
H Loadexceedsweighingcapacity Unloadthescale
LorERR 54 Weighingpanisnotinplace Positiontheweighingpan
ERR 101 - 104 Keyisstuck Releasekeyorkeypressedwhenswitchingonthedevice ContactyourlocalSartoriusServiceCenter
ERR 320 Operatingprogrammemoryfaulty ContactyourlocalSartoriusServiceCenter
ERR 335 Verifiedweighingplatformnotcompatible Connectacompatibleweighingplatform withtheconnectedterminal
ERR 340 Incorrectoperatingparameter(EEPROM) Turnthescaleoffandthenonagain. IftheerrorcodeErr340isstilldisplayed, pleasecontactyourlocalSartoriusServiceCenter
ERR 341 RAMhaslostdata Connectthedevicetopowerforatleast10hours Batteryisempty
ERR 343 Lossofdatainthememoryareafortransaction ContactyourlocalSartoriusServiceCenter numbersinexternalalibimemory
INF 01 “Display overload“ Dataoutputnotcompatiblewithoutputformat Setoutputformatcorrectly
INF 02 “Zero point error Adjustmentconditionwasnotmaintained, Unloadthescalefirstthenzero,thentareviathe)keyat start of cal.“ e.g.nottaredorweighingpanloaded
INF 03 Adjustmentcouldnotbecompleted Allowtowarmupagainandrepeattheadjustment withinacertaintime. process
INF 06 “Int. weight not Built-inadjustmentweightisdefective ContactyourlocalSartoriusServiceCenteravailable or missing“
INF 07 “Function not allowed Functionnotallowedinscalesverifiedfor ContactyourlocalSartoriusServiceCenterforfor verifiable weighing“ useinlegalmetrology informationonchangingsettings
INF 08 Theloadonthescaleistooheavytozero Checkwhether“Tare/zeroatpoweron”wascomplied thereadout withinyourconfiguration.
INF 09 Taringisnotpossiblewhenthescalegross Zerothescale weightis<zero
INF 10 Tarekeyisblockedwhenthereisdatainthe Thedatastoredfortheapplicationprogrammustbe. tarememory deletedbeforetaring
INF 22 Errorinstoringreferencevalue Loadistoolight,placeaheavierweightontheweigher
INF 23 “Application Errorininitializinganapplication ContactyourlocalSartoriusServiceCenterinitialization error“
INF 29 “Scale minimum load Minimumloadnotreached Reduceminimumload(inthe“Applicationparameters,”not reached“ under“Minimumloadforautom.initialization”)
INF 71 “Invalid value,“ Cannotstorethecurrentweightvalue NoneValue too low/high“or (e.g.,controllimitstoolowortoohigh)“selection is not possible“
INF 72 “Maximum quantity reached“ Cannotstorethecurrentweightvalue None (e.g.transactioncountermaximumreached)
INF 73 “Memory deleted/ Datanotfoundorunreadable ContactyourlocalSartoriusServiceCenterMemory not available“
INF 74 “Function is not available“ Functionisblocked Noneor (e.g.menuisblocked)“Function is blocked“
INF 88 “Function was started“ Afunctionhasbeenactivated None
INF 98 Noweighingplatformconnected Connectaweighingplatform
INF 99 Noweighingplatformconnected Connectaweighingplatform
NO WP Noweighingplatformconnected Connectaweighingplatform
116 OperatingInstructionsCombicsCompleteScales
ErrorCodes
CareandMaintenance
ServiceRegularservicingbyaSartoriustechnicianwillextendtheservicelifeofyourdeviceandensureitscontinuedweighingaccuracy.Sartoriusoffersitscustomersservicecontractswithregularmaintenanceintervalsrangingfromonemonthtotwoyears.Thefrequencyofthemaintenanceintervalsdependsontheoperatingconditionsandtheoperator‘stolerancerequirements.
Repairs 2 Disconnectthepowersupplytothedefectiveequipmentimmediately(unplugthe
powercordfromthemainssupply).RepairworkmustbeperformedbyauthorizedSartoriusservicetechniciansusingoriginalspareparts.Repairsperformedbyuntrainedpersonsmayresultinconsiderablehazardsfortheuser.
2 Ifacableorcableglandisdamagedordefective,replacethecableasacompleteunitwithallitsconnectors.
2 Donotopentheindicatorwhileitiscarryingcurrent.Waitatleast10secondsafterdisconnectingitfrompowerbeforebeginningtoopentheequipment.ProperfittingofallsurfacesisessentialfortheIPratingofthehousing;forthisreasonthedevicemustbeopenedandclosedbyacertifiedtechnician.
Cleaning 2 Disconnectthepowersupplytothescalebeforecleaning(unplugthepowercord
fromthemainssupply).
Cleaning the interior of the weighing platform (CAW.. models only)t Removetheloadplate.Specialcareisrequiredformodelslargerthan1000x
1000mm.t Usecompressedairtocleanouttheinteriororuseaweakwaterjet(max.60°C).
Takespecialcarethatnodirtgetsintothegapoftheoverloadprotection(gapbetweentheloadsensorandscrew-onplate).Corrosive Environmentt Removealltracesofcorrosivesubstancesfromthedeviceonaregularbasis.
Cleaning the Indicator
2 Disconnectthepowersupplytotheindicator(unplugthepowercordfromthemainssupply).Ifnecessary,disconnectthedatacable.
2 Makesurethatnoliquidenterstheindicator.
2 Donotuseaggressivecleaningagents(solventsorsimilaragents).
2 Donotspraythedevicewithwaterorblowwithcompressedair.
OperatingInstructionsCombicsCompleteScales 117
CareandMaintenance
IndicatorsaredesignedincompliancewithEuropeanHygienicEquipmentDesignGroup(EHEDG)directivesonsuitablemeasurestoavoidcontamination,sothattheyareparticularlyeasytocleananddisinfect.
t Cleantheindicatorwithaclothlightlymoistenedwithasoapsolution.Foruseinthefoodindustry,useacleaningagentsuitableforthatparticularworkingenvironment.
t Wipetheindicatorwithasoft,drycloth.
Cleaning stainless steel surfaces - Onlyuseconventionalhouseholdcleaningagentswhicharesuitablefor
stainlesssteel.- Onlyusesolventsforcleaningstainlesssteelparts.
t Allstainlesssteelpartsshouldbecleanedatregularintervals:Rubstainlesssteelsurfaceswithamoistcloth,withacleaningagentifrequired,thenremoveallresiduefromthesurface.
t Allowdevicetodry.Foradditionalprotection,protectiveoilmaybeapplied.
Replacing the dust coverAdamageddustcovershouldbereplacedimmediately.
t Removedamageddustcover.t Placethenewdustcoveronthedisplayandcontrolunitandpressitoverthe
edgeofthefrontandrearsideofthedeviceuntilitisfixedinplace.
Safety InspectionSafeoperationofthedeviceisnolongerensuredwhen:
– Thedeviceorthemainsconnectingleadshowsvisibledamage.– Theintegratedpowersupplyfortheindicatornolongerfunctionsproperly.– Thedevicehasbeenstoredforarelativelylongperiodunderunfavorable
conditions(e.g.,excessivehumidity)
Ifthereisanyindicationthatsafeoperationofthedeviceisnolongerwarranted:t Disconnectthepowersupplytothedevice(unplugthepowercordfromthe
mainssupply)andmakesurethedevicecannotbeusedforthetimebeing.t NotifyyournearestSartoriusServiceCenter.
Maintenanceandrepairworkmayonlybecarriedoutbyservicetechnicians:– Whohaveaccesstotherequiredmaintenancedocumentsandmanualsand– Whohaveattendedtheappropriatetrainingworkshops
h Thesealsonthedeviceindicatethatthedevicemayonlybeopenedandmaintainedbyauthorizedspecialistpersonnel,sothatthecorrectandsafeoperationofthedeviceisensuredandtheguaranteeremainsvalid.
118 OperatingInstructionsCombicsCompleteScales
CareandMaintenance
DisposalIfthepackagingisnolongerneeded,itcanbedisposedofbylocalwastedisposalauthorities.Thepackagingismadeofenvironmentallyfriendlymaterialsthatcanbeusedassecondaryrawmaterials.
Theequipment,includingaccessoriesandbatteries,shouldnotbedisposedofasregularhouseholdwaste.EUlegislationrequiresitsMemberStatestocollectelectricalandelectronicequipmentanddisposeofitseparatelyfromotherunsortedmunicipalwastesothatitmayberecycled.
InGermanyandmanyothercountries,Sartoriustakescareofthereturnandlegallycompliantdisposalofitselectricalandelectronicequipment.Theseproductsmaynotbeplacedwithhouseholdwasteorbroughttocollectioncentersrunbylocalpublicdisposaloperations–notevenbysmallcommercialoperators.FordisposalinGermanyandintheothermembernationsoftheEuropeanEconomicArea(EEA),pleasecontactourlocalservicetechniciansorourServiceCenterinGoettingen,Germany:
SartoriusWeighingTechnologyGmbH WeenderLandstrasse94-108 37075Goettingen,Germany
SWTGÖ:WEEE-Reg.-Nr.DE49923090
IncountriesthatarenotmembersoftheEuropeanEconomicArea(EEA)orwherenoSartoriussubsidiariesordealershipsarelocated,pleasecontactyourlocalauthoritiesoracommercialdisposaloperator.
Priortodisposaland/orscrappingoftheequipment,anybatteriesshouldberemovedanddisposedofinlocalcollectionboxes.
Sartoriuswillnottakebackequipmentcontaminatedwithhazardousmaterials(ABCcontamination)eitherforrepairordisposal.Pleaserefertoourwebsite(www.sartorius-mechatronics.com)orcontacttheSartoriusServiceDepartmentformoredetailedinformationregardingrepairserviceaddressesorthedisposalofyourdevice.
OperatingInstructionsCombicsCompleteScales 119
Disposal
Specifications General Specifications CAW* P | S Maximumreadability 31,250(optionA8)/100,000(optionA20)digits (notinlegalmetrology)
Accuracyclass l,m
VerificationscaleintervalsOptionA8 <3125e“Single-rangemode“or<3125e“Multi-intervalmode“or 2x<3125e“Multiple-rangemode“accordingtoEN45501
VerificationscaleintervalsOptionA20 <100,000e“Single-rangemode“or<3125e“Multi-intervalmode“or 2x<3125e“Multiple-rangemode“accordingtoEN45501
Digitalprotectiveinterface AccordingtoEN45501
Datainterface BidirectionalRS-232Cwithcontroloutputs(5V,TTLstandard),built-inasstandard
Additionaldatainterface Optional
Display 20mmweightvalue,7-digitplusstatussymbols,backlit
Housing:Material AISI304stainlesssteel(1.4301)Dustandwaterprotectionacc.toEN60529 CAW3P,CAW3P:IP44(optionalIP65) CAW3S:IP67/69K CAH3E:IP65protection,CAH3G:IP67protection
Temperaturerange –10°Cto+40°C
Powersupply 100–240VAC(–15/+10%),50–60Hz,max.17W/23VADCpowersupply optional15.5–24VDC(±10%),max.12WACpowersupply optional13–17VAC(±10%),50–60Hz,max.12W
Limitationofemissions AccordingtoEN61326-1ClassB(IEC61326-1)
Definedimmunitytointerference According.toEN61326-1,industrialareas(IEC61326-1)
Electricalsafety Acc.toEN61010-1(IEC1010-1),EN60950(IEC950)
Model-specific DataModel type: CAW*P...-L CAW*P...-I CAW*P...-BCE CAW*P....-NCE (2 x 3000e)
Readability Readability Readability Weighing range 1 Weighing range 2
Weighing capacity 15000d 30000d 1x3000e Maximum Readability Maximum Readability capacity capacity
3kg 0.2g 0.1g 1g 1.5kg 0.5g 3kg 1g
6kg 0.5g 0.2g 2g 3kg 1g 6kg 2g
15kg 1g 0.5g 5g 6kg 2g 15kg 5g
30kg 2g 1g 10g 15kg 5g 30kg 10g
60kg 5g 2g 20g 30kg 10g 60kg 20g
150kg 10g 5g 50g 60kg 20g 150kg 50g
300kg 20g 10g 100g 150kg 50g 300kg 100g
600kg 50g 20g 200g 300kg 100g 600kg 200g
1500kg 100g 50g 500g 600kg 200g 1500kg 500g
3000kg 200g 100g 1000g 1500kg 500g 3000kg 1000g
120 OperatingInstructionsCombicsCompleteScales
Specifications
CAW*S... Model ResolutionsResolution 1 weighing range Resolution* 2 weighing ranges
CAW*S... -L -I -BCE -NCE
Weighing Weighing Resolution Weighing Resolutionrange 15,000d 30,000d 1x3000e range1 range2 Range2
inkg ing ing ing inkg ing inkg ing
3 0.2 0.1 1 1.5 0.5 3 1
6 0.5 0.2 2 3 1 6 2
15 1 0.5 5 6 2 15 5
30 2 1 10 15 5 30 10
60 5 2 20 30 10 60 20
150 10 5 50 60 20 150 50
300 20 10 100 150 50 300 100
600 50 20 200 300 100 600 200
1500 100 50 500 600 200 1500 500
3000 200 100 1000 1500 500 3000 1000
2 x 3000e1) 3 x 3000e1)2) 6000e1)2)
MultiIntervall-MCE MultiRange-UCE -RCE Weighing ResolutionWeighing ResolutionWeighingResolution WeighingResolutionWeighing ResolutionWeighing Resolu-range1 range1 range2 range2 range1 range1 range2 range2 range3 range3 range tioninkg ing inkg ing inkg ing inkg ing inkg ing inkg ing
1.5 0.5 3 1 – – – – – – – –
3 1 6 2 1.5 0.5 3 1 6 2 – –
– – – – 3 1 6 2 15 5 – –
15 5 30 10 6 2 15 5 30 10 – –
30 10 60 20 15 5 30 10 60 20 60 10
60 20 150 50 30 10 60 20 150 50 120 20
150 50 300 100 60 20 150 50 300 100 300 50
300 100 600 200 150 50 300 100 600 200 600 100
600 200 1500 500 300 100 600 200 1500 600 1200 200
1500 500 3000 1000 600 200 1500 500 3000 1000 3000 500
*TheweighingrangespermittedforuseinlegalmetrologyarelistedintheDeclarationofConformity.Therespectiveweighingrangecannotbeshiftedfordeviceswithtwoweighingranges(2x3000e).Ifahigherweighingrangeisusedforweighing,thenthelowerresolutionremainsaftertaring.
1) IP69KnotforallCAW*S4models(seedatasheet)2) Dependingonthemodeltype(seedatasheet)
Resolution (depending on the readability)–L 15,000d,intervals–I 30,000d,intervals–BCE 1+3,000e,verifiableintervals–NCE 2+3,000e,verifiableintervals,multi-range,fixedfinerange–MCE 2+3,000e,verifiableintervals,multi-interval,adjustablefinerange–UCE 3+3,000e,verifiableintervals,multi-range,fixedfinerange–RCE 1+6,000e,verifiableintervals
OperatingInstructionsCombicsCompleteScales 121
Specifications
CAH...
Reference device
Description Weighing Readability Verification scale interval Min. load (g) Dimensions (mm) capacity (kg) e=(g), d=(g) Accuracy class CAH3E-16ED-H 16 0,1 – – 400 + 300 + 120-16ED-HCE 16 0,1 1 5 400 + 300 + 120-34ED-H 34 0,1 – – 400 + 300 + 120-34ED-HCE 34 0,1 1 5 400 + 300 + 120-64ED-S 64 1 – – 400 + 300 + 120-64ED-SCE* 64 1 10 50 400 + 300 + 120-64ED-H 64 0,1 – – 400 + 300 + 120 CAH3G-64FE-S 64 1 – – 560 + 450 + 95-64FE-HCE* 64 1 10 50 560 + 450 + 95-150IG-H 150 1 – – 800 + 600 + 117-150IG-HCE* 150 1 10 50 800 + 600 + 117-300IG-H 300 2 – – 800 + 600 + 117-300IG-HCE* 300 20 20 1000 800 + 600 + 117* = Only kg as weight unit
Type designation Combics high resolution complete scales
CAH3EApplication Base frame design of platform Weighing range Platform dimensions Resolution Resolution verifiable versions
CAH3 E -16 ED -H -HCE
E -34 ED -H -HCE
E -64 ED -S -SCE
Order code E: = Base frame epoxy resin coated
CAH3GApplication Base frame design of platform Weighing range Platform dimensions Resolution Resolution verifiable versions
CAH3 G -64 FE -S -SCE
G -150 IG -H -HCE
G -300 IG -H -HCE
Order code G = base frame galvanized
122 Operating Instructions Combics Complete Scales
Specifications
DeviceDimensionsDimensions of CAH platforms (Scale Drawings)Alldimensionsaregiveninmillimeters
CAH*G
CAH*E
OperatingInstructionsCombicsCompleteScales 123
Specifications
Dimensions of indicator (Scale Drawings)Alldimensionsaregiveninmillimeters
100
195
50 96
302
54
M4 (3x)
30
124 OperatingInstructionsCombicsCompleteScales
Specifications
AccessoriesProduct Order No.
Verifiableprinterwithfunctionsfordate,timeandstatisticalevaluationsandLCdisplay. YDP20-0CE– 5x50mpaperrollsfordataprinter 6906937– Replacementinkribboncartridgeforprinter 6906918
Verifiablestripandlabelprinterwithbarcodeprintout,paperwidth108mm,withadaptercable(12-pinroundmaleconnector)andexternalpowersupply. YDP14IS-0CEUVVerifiablestripandlabelprinterwithbarcodeprintout,paperwidth60mm,withadaptercable(12-pinroundmaleconnector)andexternalpowersupply. YDP04IS-0CEUV
– AdaptercableforCAISLindicator YCC01-01CISLM3– AdaptercableforCAISindicator YCC02-R12F6
Verifiablestripandlabelprinterwiththermalprinthead,paperwidth60mm,withadaptercable(12-pinroundmaleconnector)andexternalpowersupply. YDP14S-0CEUVTH
– AdaptercableforCAISLindicator YCC01-01CISLM3– AdaptercableforCAISindicator YCC02-R12F6– InkribbonforYDP14IS-0CEUVTH 69Y03234– 3paperrollsforYDP04IS,
60mm+75m,thermalpaper 69Y03090– Labels,small,58mm+30mm,1000labels 69Y03092– Labels,medium,58mm+76mm,500labels 69Y03093– Labels,large,58mm+100mm,350labels 69Y03094
UniCOM interface: CAW1P CAW2P, CAW1/2/3S, CAH1/3 CAW3P Installationoptions: ForinstallationForinstallationForinstallation inIP44version inIP44version inIP69Kversion Interfacemodule(RS-232) – • • YDO02C-232Interfacemodule(RS-422andRS-485)galvanicallyisolated – • • YDO02C-485ElectricallyisolateddigitalI/Os,5outputsand5inputs,freelyconfigurable – • • YDO02C-DIOAnalogcurrentoutput,0–20mA,4–20mA,0–10V,16bit1) – • • YDO02C-AOProfibusDPinterfacemodule1) – – • YDO02C-DPEthernetinterfacemodule – – • YDO02C-ETH
1)Suitableforuseinzones2+22
OperatingInstructionsCombicsCompleteScales 125
Accessories
Product Order No.
Replacement 1st weighing point/scale connection instead of internal A/D converter (3000e)Analogplatform10,000e YDI02C-WPARS-232interfacefordigitalplatform YDI02C-WPDRS-485interfacefordigitalplatform YDI02C-WPD
2nd weighing point/Scale connectionAnalogplatform10,000e YDI02C-WPARS-232interfacefordigitalplatform YDI02C-WPDRS-485interfacefordigitalplatform YDI02C-WPD
External interface adapterConnectioncablefromRS-232datainterfacetoUSBinterfaceonthePC,D-SUBplug25-pin,2m1) YCC01-USBM2Digitalinput/outputmoduletoconnectCombics2toexternalcontrolunits,with8opencollectoroutputs(50mA)and7TTL-compatibleinputs(0–30V),YCC02-RELAIS01/02connectioncablerequired YSB02RelayboxtoconnectCombics2toexternalcontrolunits,YCC02-RELAIS01/02connectioncablerequired VF3033
SoftwareSartoriusNiceLabelExpress(SNLE) YAD02ISWinScaleforWindows YSW03SartoCollect YSC02
Other FunctionsGuardcovers(x2) YDC01CIIP65kitforcableconnections(D-SUB25) onrequestCableglandforcableswithdiameter4.5to9mm,M16x1.5 YAS04CISKitforcontrolpanelinstallation2) YAS07CIPlugandsocketsettoconnectanalogweighingplatformstoindicators(separableconnection) YAS99IStainlesssteelcableconnectionboxforconnectingupto4loadcellsinoneplatformorforexternalassembly,PR6130/64S 940536130642Relayboxtoconnectweighinginstrumentstoexternalcontrols,with4(5)relayoutputs(250V/3A)and1optocouplerinput(0–30V) YSB01
Peripheral devicesControldisplayred/green/red YRD14ZRemotedisplayforCombicsCAW3Pindicators YRD02ZRemotedisplay,7-segment,upto45mmcharactersize onrequestBarcodescanner,120mmscanningwidth,withcableforconnectiontoCAISL2 YBR03PS2Footswitch,incl.D-Sub25-pinT-connector YFS01Handswitch,incl.D-Sub25-pinT-connector YHS02Flowcontrolforpumpswithanalogorpulseinterface YFC02Z-V2Flexibleformattingoptionsforprintouts(e.g.,barcodes,variablefontsizes,graphics,etc.) onrequest
1)CAW3Pmodelsonly 2)Suitableforuseinzones2+22
126 OperatingInstructionsCombicsCompleteScales
Accessories
Product Order No.
Mechanical accessoriesBracketsforwallmounting,stainlesssteel YDH02CISFloor-mountedcolumn YDH03CIPFloor-mountedcolumn,stainlesssteel YDH03CISBaseforinstallingfloor-mountedcolumn YBP03CIPBaseforinstallingfloor-mountedcolumn,stainlesssteel YBP03CISMountforbarcodescanner,tobeattachedto:floor-mountedcolumn,benchstand,completescaleretainer YBH01CWSPlateforattachingaprintertothefloor-mountedcolumnorbenchstand YPP01CWSCastorset(2guidecastors,2lockablecastors)forYBP03CIP/Sfloor-columnbase YRO03CIPlugandsocketsettoconnectanalogweighingplatformstoindicators(separableconnection) YAS99IElectrical requirements24Vindustrialpowersupplymodule1) onrequestExternalrechargeablebatterypack,upto40hoperation,incl.charger YRB10ZExternalrechargeablebatterypack,upto40hoperation,w/outcharger YRB10Z-R
Connection cable for CAW*S (IP 69K)Connectioncablewithcablegland,opencableendsonCombicsside-forbarcodescannerYBR03FC,5-pinDINsocket,1m YCC02-BR02-forprinterYDP12/04IS,9-pinD-SUBplug,6m YCC02-D09M6-forprinterYDP20-0CEorPC,9-pinD-SUBsocket,6m YCC02-D09F6-forSartoriusscales,25-pinD-SUBplug,6m YCC02-D25M6-forvariousaccessories,25-pinD-SUBsocket,6m YCC02-D25F6-forSartoriusscales,12-pinroundplug,6m YCC02-R12M6-forvariousaccessoriesandISplatforms,12-pinround
plugsocket,6m YCC02-R12F6-opencableends,6m YCC02-RELAIS02EthernetconnectioncablewithcableglandandRJ45plug,7m YCC02-RJ45M7
Connection cable for CAW*P (IP 44)Connectioncable25-pinD-SUBplugonCombicsside-forprinterYDP12/04IS,9-pinD-SUBplug,6m YCC01-01CISLM3-forPC,9-pinD-SUBsocket,6m 7357314-forSartoriusscales,25-pinD-SUBplug,3m YCCDI-01M3-forvariousaccessories,25-pinD-SUBsocket,6m 7357312-forSartoriusscales,12-pinroundplug,3m YCC01-02ISM3-forvariousaccessoriesandISplatforms,
12-pinroundplugsocket,6m YCC01-03CISLM3-opencableends,6m YCC02-RELAIS01ConnectioncablefromRS-232datainterfacetoUSBinterfaceonthePC,25-pinD-SUBplug,2m YCC01-USBM2
1)Suitableforuseinzones2+22
OperatingInstructionsCombicsCompleteScales 127
Accessories
DocumentsList
Operating instructionsBasicapplicationprograms(optionH0andI2) 98646-003-22Basicfilling(optionH3) 98646-002-18Fillingplus(optionH4) 98646-002-23ProControlterminal(optionH6) 98646-002-34UniCOMinterfaces 98647-004-24Standardfieldbusinterface 98646-002-04Verifiablealibimemory 98647-004-40
Installation InstructionsUseinZone2and22potentiallyexplosiveatmospheres(optionY2) 98647-003-40
SartoriusServices
“Installation“ service in GermanyOur“Installation“servicepackageprovidesarangeofimportantservicesthatguaranteesatisfactoryworkfromyourdevice:– Installation– Commissioning– Inspection– InstructionYoucanrequesttheseservicesfromourcustomerserviceusingthe“InstallationCheckNo.2“intheincludedwarrantyandservicecheckfolder.
Re-verification in GermanyScaleverificationforlegalmetrologyisvaliduntiltheendofthecalendaryearafternext.Ifthescaleisusedforfilllevelcontrolinaccordancewithlegislationonprepackaging,verificationisvaliduntiltheendofthefollowingcalendaryear.Re-verificationmustcurrentlybecarriedoutbyaweightsandmeasuresofficial.Re-verificationshouldberequestedingoodtimefromthelocalWeightsandMeasuresoffice.Asappropriate,pleaseobserveallstatutoryamendments.
Subsequent Verifications within European CountriesTheexpirationdateoftheverificationdependsonthenationalregulationsofthecountryinwhichtheweighinginstrumentisused.Forinformationonverificationandlegalregulationscurrentlyapplicableinyourcountry,andtoobtainthenamesofthepersonstocontact,pleasecontactyourlocalSartoriusoffice,dealer,orServiceCenter.
Furtherinformationconcerningverificationcanbeobtainedfromourcustomerservicecenters.
128 OperatingInstructionsCombicsCompleteScales
DocumentsList
DeclarationofConformity
OperatingInstructionsCombicsCompleteScales 129
DeclarationsofConformity
130 OperatingInstructionsCombicsCompleteScales
DeclarationsofConformity
OperatingInstructionsCombicsCompleteScales 131
DeclarationsofConformity
132 OperatingInstructionsCombicsCompleteScales
TestCertificate
OperatingInstructionsCombicsCompleteScales 133
PlatesandMarkings
134 OperatingInstructionsCombicsCompleteScales
PlatesandMarkings
OperatingInstructionsCombicsCompleteScales 135
PlatesandMarkings
136 OperatingInstructionsCombicsCompleteScales
PlatesandMarkings
OperatingInstructionsCombicsCompleteScales 137
Appendix
Appendix:GuidetoVerificationofWeighingInstrumentsEvidence of compatibility for modules used with non-automatic weighing instruments
Thedocumentsrequiredtoverifyaweighinginstrumentforlegalmetrologycanbecreatedusingthedata,documents,andprogramsavailablefromtheSartoriuswebsite.Theprintoutofthecompletedformsisvalidasamodelforverificationoftheweighinginstrumentproducedbythescalemanufacturer.Oncethishasbeenproperlycompletedandsignedbytheweighinginstrumentmanufacturer,itissubmittedtotheweightsandmeasuresofficertogetherwiththeDeclarationofConformity(see“DeclarationofConformity“chapter).Informationimportanttotheweightsandmeasuresofficermayincludethetypeapprovalcertificate,testcertificateoratestreport.Thetestcertificateandthemanufacturer‘sinformationconcerningtheweighcellwillalsoberequired.
Filling in the Evidence of Compatibility t TheGuidetoVerificationofWeighingInstruments,completewithExcelfile,documentsandinformation,isavailablefromSartoriusontheInternetat:http://www.sartorius-mechatroncs.com/leitfaden_eichen/
Creating the Evidence of Compatibility without Internet Access t Youcanorderthe“GuidetoVerificationofWeighingInstruments“on
CD-ROMdirectlyfromSartorius.Orderaddress:
SartoriusWeighingTechnologyGmbHHotlineDept.WeenderLandstrasse94-108Goettingen,GermanyPhone:+49.551.308.4440Fax(inGermany):+49.551.308.4449www.sartorius-mechatronics.com
Procedure:
t Selecttherequiredlanguageversionbyclickingonthecorrespondinglanguage.t Selecttherequiredindicatoratthetopofthepage.
Usingtheprogram:
ReadMe fileReadthisfilebeforeopeningtheExcelfile.TheReadMefilecontainsimportantinformationaboutusingtheExcelfile,andoffersimportantinformationonfillingoutthedocuments.
DocumentsAlldocumentsrelevanttothecompatibilitydeclarationoftheindicatorareavailable(pleaseclickontheappropriatelinks).
Startt Clickon“StarttheExcelProgram.”y TheExcelfileautomaticallyopenswiththeExcelprogram.
MS-Excelmustalreadybeinstalledonyourcomputer.Adialogboxforselectingmacrosopens.
t Clickonthe“Activatemacros”button.y Note:Thiswindowmightnotopen,dependingonthesettingsinyourcomputer
system.t Allfieldsonthe“Data“page(highlightedinyellow)mustbefilledoutbya
qualifiedperson.y Afilledoutsampledocumentisavailableinthe“Documents“folderwith
explanationsofthefieldsthatarehighlightedinyellow.Oncethetechnicalspecificationsprovidedbythemanufacturerhavebeenenteredcorrectly,theprogramcalculatesallvaluesautomatically.
Onthelastpage,thegreenorredfieldsshowwhetherthecomponents(indicatorandweighcell/s)arecompatible:– Red=incompatible– Green=compatible
Note:Amanufacturerofweighingequipmentwhoconfiguresaweighinginstrumentfromindividualcomponents(indicatorandweighcell/s)isresponsibleforthespecificationsinthedocumentation.
t Oncealldatahasbeenenteredcorrectly(allfieldsonpage2aregreen),printoutbothpages.
t Thefilecanthenbearchived(forexample,savedonthePC)underanameofyourchoice.
t Double-checktheinformationandsignthedatasheet.
Legal Terms and Conditions Copyright Thisdocumentationmaynotbeduplicatedortransmittedforanypurpose
whatsoever,eitherinwholeorinpart,withouttheexpresswrittenpermissionofSartorius.AllrightsdefinedundercopyrightlawarereservedbySartorius.Theprogramisintendedforusebythepurchaseronly.Transfertothirdparties,whetherfreeofchargeorinreturnforpayment,isnotpermitted.Thesoftwaremaynotbemodified,reverseengineeredorchangedbyassimilation.TheExcelprogramusedherewasdevelopedbytheGermanAssociationofMetrologyandCalibration(ArbeitsgemeinschaftfürMess-undEichwesen(AGME)).ItisalsoavailableasfreewareontheInternet.Theprogramiscopyrightedandmaynotbemodified.Usersshallbeliablefortheimproperuseofsaidsoftware.
138 OperatingInstructionsCombicsCompleteScales
Appendix
OperatingInstructionsCombicsCompleteScales 139
140 OperatingInstructionsCombicsCompleteScales
SafetyInformationenEX
Page 4of1
65954-750-16
Safety Information11.05.2012
KlausgreteDrawing No.
Designation
Revision 01
1. Mains Connection
Explosion-risk area Zone 2 or Zone 22Explosion-safe area
Indicator CAIS.or
complete scaleCAW...-......-......
each with option Y2
2. Data Transfer
PC,Printer,PLC,etc.
For data transfer only and, if required, supply for the connected device (e.g. printer), there is no supply voltage going from the connected device to the indicator / complete scale
These devices may also be installed in Zone 2 or Zone 22 if they are suitable for Category 3 as per the ATEX Directive.
Gas: Group IIC, temperature class T4Dust: Group IIIC, Tmax 80°CAmbient temperature: -10°C … +40°C …
Protect connector from equipment supplied from being disconnected. Make sure the emergency stop works.
Connector from equipment supplied
Connection alternatives
Use an explosion-protected connector
Equipotential bonding conductor
Equipotential bonding conductor
Note 8)
EX
Indicator CAIS.or
complete scaleCAW...-......-......
each with option Y2
Note 8)
Note 16)
OperatingInstructionsCombicsCompleteScales 141
SafetyInformationenEX
Page 4of2
65954-750-16
Safety Information11.05.2012
KlausgreteDrawing No.
Designation
Revision 01
Analog weighing platforms from seriesCAAP..-......-...... + Option Y2 or other weighing platforms suitable for Zone 2 or 22 (category 3G or 3D) that can be supplied via a bridge supply voltage of at least 9 VDC (±4.5 VDC).
ADU output withbridge supply voltage
9 VDC (±4.5 VDC)
3. Connecting Weighing Platforms
4. Connecting External Devices
Equipotential bonding conductor
Equipotential bonding conductor
Indicator CAIS. with option Y2
Analog weighing platforms (load cells) of series
CAAP..-......-...... + Option Y2
Connection alternatives
Explosion-safe area
Note 8)
Note 8)
Note 8)
Note 8)Note 8)
External device with bridge supply voltage
12 VDC (±6.0 VDC)
External device withbridge supply voltage
12 VDC (±6.0 VDC)
Device must be suitable for Zone 2 and/or 22!
Digital weighing platforms that are suitable for Zone 2 or 22 (category 3G or 3D) and can be supplied by at least 16 VDC via the data output.
Data output with nominal supply voltage
16 VDC
Note 8)
Explosion-risk area Zone 2 or Zone 22
Gas: Group IIC, temperature class T4Dust: Group IIIC, Tmax 80°CAmbient temperature: -10°C … +40°C
142 OperatingInstructionsCombicsCompleteScales
SafetyInformationenEX
Page 4of3
65954-750-16
Safety Information11.05.2012
KlausgreteDrawing No.
Designation
Revision 01
These safety instructions apply to installation, use, maintenance and repair 1. The device (CAIS. indicator, CAAP weighing platform..-……-……, CAW complete scale…-……-…...)
is suitable for use in potentially explosive atmospheres of Zone 2 (Group IIC, temperature class T4 or T6 for weighing platforms) and Zone 22 (Group IIIC; surface temperature 80°C) according to EU Directive 94/9/EC and applicable harmonized European standards. This does not guarantee compliance with other properties and requirements.
2. The device may only be used indoors.3. Do not use it as a portable instrument. 4. Installation, operation, maintenance and repairs should only be performed by an authorized
specialist, in accordance with applicable laws, rules and regulations, ordinances and standards. Particular attention should be paid to Standard EN 60079-14 within the scope of validity of EU Directive 94/9/EC for the installation. Installation, maintenance, cleaning and repair work may only take place with all power disconnected from the device and any connected peripheral devices.
5. It is essential that recommendations on the installation, operation, maintenance and repair contained in the operating instructions supplied are complied with for all equipment (including connected devices). The temperature ranges of connected devices must also be taken into account.
6. The device should only be used in a temperature range of -10°C … +40°C, do not expose it to unacceptable sources of heat or cold, direct sunlight, UV radiation, shocks or vibrations, and the installation should ensure that heat can be properly dissipated and external heat sources are kept at a sufficient distance.
7. Tighten the cable entry glands using a torque of 5 Nm. The cable gland for the power cord should be tightened with a torque of only 3 Nm. Install the external connecting cables firmly to avoid damage and strain. The cable connections inside the explosion-risk area must be secured against loosening.
8. All metal parts must be electrically connected to the same equipotential bonding conductor (PA) so that any electrostatic charges can be conducted away from the equipment. For this purpose, the equipment operator is obligated to connect a lead with a gauge of at least 4 mm² (cross section) to the equipotential bonding terminal (indicated by the ground symbol) located on the housing. A suitable ring terminal must be attached to the end of the cable. The cable must be laid so that the ground connector cannot come loose. The connection to the equipotential bonding conductor should be checked to see if it is of low resistance at the time of installation and at regular intervals. The indicator and weighing platform must each be connected individually to the equipotential bonding conductor if no metal connection (e.g. support arm) is used between them. Do not use the shield of the connection cable for the equipotential bonding conductor.
9. Before opening devices, switch off the supply voltage, or make sure that the area is not potentially explosive. Do not connect or disconnect any live cables inside an explosion-risk area.
10. When closing, make sure the cover screws are tightly secured.11. The device should only be operated for the first time when it is certain that the area is not
potentially explosive.12. Data lines to connected devices and the connection cable to the weighing platform should be
secured against accidental disconnection and may only be connected and disconnected when the power supply is turned off. Block unused outlets to guarantee the IP 65 level of protection. Keep any transitory voltage phenomenon away from the device.
13. Data cables are for data transfer only and may not supply any power from the connected device to the indicator / complete scale. However, one digital weighing platform suitable for use in Zone 2 or 22 connected to the data output can be supplied via direct voltage if it can be supplied by direct voltage of at least 16 VDC via the data output.
OperatingInstructionsCombicsCompleteScales 143
SafetyInformationenEX
Page 4of4
65954-750-16
Safety Information11.05.2012
KlausgreteDrawing No.
Designation
Revision 01
14. During installation, take suitable steps to prevent stray electrical interference (e.g. due to magnetic fields). Keep any voltage transients away from the device.
15. The indicator (indicator of the complete scale) should be installed so that there is only a low risk of mechanical danger to the IP protection. The IP protection rating of the device is IP6x according to EN 60529 / IEC 60529. The device is designed for clean environments and must be handled carefully according to the IP protection rating.
16. The power connection must be made in accordance with the regulations applicable in the country of operation. A correct power connection must be ensured. The power supply cable should be protected against damage and properly connected to the power supply (100 - 240 VAC, ± 10%,50-60Hz) or 24 VDC (± 10%) for Option L8. The indicator and/or complete scale is approved for circuits up to 1500 A. Only use the power supply connection cable in the hazardous area with a suitable and approved explosion-protected plug. Alternatively: Protect connector from being disconnected or attach the power supply connection cable directly. Be sure to provide a suitable emergency shut-off switch.
17. Avoid generating static electricity. Only use a damp cloth to clean the device. This is especially true when using a dust cover. The equipment operator assumes responsibility for preventing any risks caused by electrostatic charging.
18. If cables are connected subsequently, make sure that the connections are not corroded. The grounding conductor of a mains connection cable must have the same cross section as the current-carrying wires (N and L).
19. All external cables (even cables between load cells / weigh cells and connection box / junction box) are only suitable for fixed placement and must be laid fixed. Otherwise, use screwed connections designed according to EN60079-0 and rounded at an angle of 75º (minimum) and a radius at least equal to one-quarter of the diameter of the cables, but without exceeding 3 mm.
20. Cables from third-party manufacturers (subject to the user’s responsibility) must be tested for suitability according to Appendix A EN 60079-0. Pay attention to the pin assignment. Pay attention to the wiring diagram. Remove unneeded connections.
21. Unused openings must be sealed using suitable cover caps (dummy plugs) to ensure their IP protection rating. Do not remove while it is carrying current.
22. When using external devices in Zone 2 hazardous areas, pay attention to the gas group and temperature class. The outputs must include the Ex nA electrical circuits. Pay attention to the maximum surface temperature and group for Zone 22.
23. Chemicals that can attack housing gaskets and cable sheathings must be kept away from the device. These include oil, grease, benzine, acetone, and ozone. If you are uncertain, contact the manufacturer.
24. The installation must be inspected for correct function and safety by a trained and qualified person at appropriate intervals.
25. If the installation does not operate properly, disconnect it from the supply voltage immediately and secure it against further use.
26. In the event of repair, use only original spare parts supplied by the manufacturer.27. Any modifications to the instrument (except by persons authorized by Sartorius) cause loss of
conformity for use in Zone 2 and Zone 22 explosion-risk areas and invalidate all guarantee claims. Similarly, the device may only be opened by qualified and authorized personnel.
28. Modifications (also those by Sartorius personnel) are subject to written approval.29. These instructions are given in addition to those in the instruction manuals and do not release the
operator from his responsibilities for the installation, operation and inspection of the equipment in compliance with any applicable regulations in the country of use.
Appendix:PasswordsService Password
t Pressetoturnonthedevice.y Whenturnedonthescaleisinanapplicationprogram. t EntertheservicepasswordandconfirmwiththeMkey.
y ThedeviceinnowisServicemode.An“S“appearsinthetopright-handcornerofthedisplay.
General Password t PressM.
y Themenuappearsonthedisplay.t Pressthe“q“softkeyseveraltimestoselectthe“Device
parameters“line(or“Application parameters“).
t Pressthe“O“softkey.y TheAccesswindowappearsonthedisplay.t Enterthegeneralpassword(seebelow)viathekeypad,see“NumericInputvia
theKeypad.“t Pressthe“l“softkey.
y Thedeviceselectionappearsonthedisplay.t Pressthe“q“severaltimestoselectthe“Password“line.t Pressthe“O“softkey.
y Theinputlineappearsonthedisplay.t Readtheoldpassword,orenteranewpassword(max.8characters).t Press. orcseveraltimestodeletethepassword.t Pressthe“l“softkeytosavethedelete. Ifnotyetsaved,theprocesscanbecanceledusingthe“ESC“softkey.
t PressM or“oo“toexittheSetupmenu.t Pressetoturnoffthedevice.t Presseturnthedevicebackon.
Appendix
Service password:202122
General password:40414243
SartoriusWeighingTechnologyGmbHWeenderLandstrasse94-10837075Goettingen,Germany
Phone+49.551.308.0Fax+49.551.308.3289www.sartorius-mechatronics.com
CopyrightbySartorius,Goettingen,Germany.NopartofthispublicationmaybereprintedortranslatedinanyformorbyanymeanswithoutthepriorwrittenpermissionofSartorius.AllrightsreservedbySartoriusinaccordancewithcopyrightlaw.Theinformationandfigurescontainedintheseinstructionscorrespondtotheversiondatespecifiedbelow.Sartoriusreservestherighttomakechangestothetechnology,features,specificationsanddesignoftheequipmentwithoutnotice.
Date:July201 ,SartoriusWeighingTechnologyGmbH,Goettingen
PrintedinGermany.Printedonpaperbleachedwithoutchlorine.RS·KTPublicationNo.:WCA6010-e1 07