OPERATING INSTRUCTIONS - JK-Global Service · Read these operating instructions. Failure to observe these instructions: may result in serious injury and death, can result in damage

O PE RAT ING INSTRUCT IONS

S UN ERGOL I N E , A D I V I S ION OF JK- PRODUCTS & SERV ICES , IN C .

1 Walter Kratz DriveJonesboro, AR 72401Phone: 800.643.0086 (Toll-free)Fax: 870.935.3618Website: www.sunergoline.comE-Mail: [email protected]

10

08

46

1

SUNDA SH 32/1 SUP ER POWER

StartStop

SO URPX EE

T EI M

15 min

SUNDASH 32/1

Operating instructions (Part II)

1008461-00 / us / 01.2014

SUPER POWER

15

Contact information

2

Contact information

Technical Service: JK Global Service A Div of JK Products & Services, Inc. #1 Walter Kratz Drive Jonesboro, AR 72401 800-445-0624 870-935-9046 e-mail: [email protected] http://support.jkamerica.com

See also Operating Instructions Part I (1006322): Contents 1 General 2 Information for the studio operator 3 Operation 4 Cleaning and maintenance 5 JK-Products, Inc. – Limited Warranty 6 Appendix

WARNING!

WARNING! Read these operating instructions.

Failure to observe these instructions:

may result in serious injury and death, can result in damage to the device and to the environment. – For the safety of yourself and others, read and observe all instructions

contained herein before operating the tanning system. – Please make the instructions and additional information available to

anyone who operates or services the tanning system.

Copyright The copyright remains with JK-Holding GmbH. The contents may not be duplicated (in whole or part), distributed or utilized for competition purposes without authorization or disclosed to other parties. The right to make technical changes in regard to the figures and information contained in this instruction manual is reserved!

Table of contents

01/2014 1008461-00 Operating Instructions – 3

Table of contents

1 Important information on tanning ....................................................... 4 1.1 Skin types ............................................................................................... 4 1.2 Tanning times ......................................................................................... 4

2 General .................................................................................................. 5 2.1 Definitions ............................................................................................... 5 2.2 Identify your tanning device .................................................................... 5

3 Safety notices ....................................................................................... 6 3.1 Description of warning signs ................................................................... 6 3.2 Instructions pertaining to a risk of fire, electric shock, or injury .............. 7 3.3 Instructions pertaining to a risk of damage to the machine .................... 9

4 Description .......................................................................................... 10 4.1 Device description ................................................................................ 10 4.2 Accessories (optional) .......................................................................... 11 4.3 Function description ............................................................................. 11

5 Operation ............................................................................................ 12 5.1 Operation overview .............................................................................. 12

5.1.1 Navigation .................................................................... 12 5.2 Functions .............................................................................................. 13 5.3 Start ...................................................................................................... 14

5.3.1 Preparation time ........................................................... 14 5.3.2 Interrupt or end tanning session ................................... 14

5.4 MP3 player connection ......................................................................... 15

6 Cleaning and maintenance ................................................................ 16 6.1 Cleaning plan ....................................................................................... 16 6.2 Maintenance plan ................................................................................. 18

7 Technical data .................................................................................... 19 7.1 Power rating, electrical specifications and noise level .......................... 19 7.2 Dimensions ........................................................................................... 20 7.3 Lamp configuration ............................................................................... 21

7.3.1 SUNDASH 32/1 SUPER POWER ................................ 21 7.3.2 Accent lighting .............................................................. 22

7.4 Spare parts and accessories ................................................................ 22

8 Appendix ............................................................................................. 23 8.1 Signs and stickers on the device .......................................................... 23

9 Index .................................................................................................... 25

Important information on tanning

4

1 Important information on tanning

1.1 Skin types

Skin type I (Sensitive): Invariably gets sunburn, accepts little natural sunlight and does not tan. Skin type II (Fair): Gets sunburn easily and severely, tans minimally or lightly and peels. Skin type III (Average): Often referred to as “Average” complexion, gets moderate sunburns and tans about average. Skin type IV (Brown): Seldom gets sunburns, tans easily and above average with each exposure. Skin type V (Dark Brown): This individual’s system rarely gets sunburns, tans easily and substantially.

1.2 Tanning times

This product is in conformity with performance standards for sunlamp products under 21 CFR 1040.”

General


2 General

2.1 Definitions

(Studio) operator People who provide tanning devices to users on a commercial basis. The operator is responsible for the orderly operation of the device as well as the compliance with the maintenance intervals.

User A person who uses the tanning device at a commercial location.

Staff People who are responsible for the operation, cleaning as well as general maintenance work and who instruct the users in the operation of the devices.

Electrician A person with suitable professional training, knowledge and experience which enables them to identify and avoid the dangers which can arise from working with electricity.

Authorized and trained qualified staff Qualified staff from an external company who have been trained and authorized by the manufacturer for assembly and maintenance work with specific tanning devices.

2.2 Identify your tanning device

For contact with Customer Services, please write down the serial number of your tanning device, see page 23.

Safety notices

6

3 Safety notices

3.1 Description of warning signs

Danger notices, damage to persons:

DANGER!

DANGER! Type and source of danger, e.g. “DANGER – High voltage!”

Description of the consequences, e.g. “You can be killed or injured by an electric shock!” Countermeasures: – Disconnect device from power supply before opening. – Do not reach into the inside with the device switched on.

Warning notices, damage to persons:

WARNING!

WARNING ! Type and source of danger, e.g. “Warning – hot surface!”

Description of the consequences, e.g. “You can burn your hand (skin, face)!” Countermeasures: – Do not touch hot parts and nearby surfaces. – Wait until hot parts and surfaces have cooled down.

Caution notices, damage to property:

CAUTION!

The word “Caution” with this label points out that danger for devices, materials and the environment can be expected here.

Important information:

NOTE: This symbol does not identify safety notices, but states information for a better understanding of the processes.

Safety notices


3.2 Instructions pertaining to a risk of fire, electric shock, or injury

DANGER!

DANGER – HIGH VOLTAGE! You can be killed or injured by an electric shock!

Assembly and electrical connection must comply with national and local regulations. – The device may only be assembled, installed, upgraded or repaired by

specially trained and instructed personnel.

WARNING!

WARNING – ULTRAVIOLET RADIATION! Unprotected tanning may result in eye injury and eye diseases.

The unprotected eye can become inflamed on the surface, and in certain cases the retina can be damaged by excessive radiation. Cataracts can form after repeated exposure to radiation. – Inform users to use the included protective goggles that block

UV.

WARNING!

WARNING – ULTRAVIOLET RADIATION! Follow instructions.

Failure to use protective eyewear may result in severe burns or other eye injury. If discomfort develops, discontinue use and consult a physician. – A person who does not tan in the sun most likely will not tan from the

use of this device. Persons with very sensitive skins (skin type I) must not use the unit, as with this skin type tanning is impossible without damaging the skin (e.g. sunburn).

– Individuals with acute sunburn, individuals who have had or have skin cancer, or individuals who are at increased risk of skin cancer, must not use the system.

– UV devices must not be used without taking medical advice if unexpected effects, such as itching, occur within 48 hours of the first session.

– The sunbed must never be used if a filter panel is missing or damaged, or the timer is defective!

– UV light from the sun or UV systems can cause injuries to the skin or eyes. This biological effect is dependent on the sensitivity of the individual's skin and on the type and amount of UV light.

– As with natural sunlight, overexposure can cause eye and skin injury, sunburn, and allergic reactions.

– Repeated exposure may cause premature aging of the skin and skin cancer.

Safety notices

8

– Medications or cosmetics applied to the skin, may increase sensitivity to ultraviolet light.

A person having a history of skin problems should consult a physician before use.

WARNING!

WARNING – ULTRAVIOLET RADIATION! Danger of long-term consequences.

– Overexposure should be avoided. – The elderly should not use this equipment. – Nursing infants and small children through age 7 years may not use

this device. – The following applies to minors under the age of 18 years: Only use

tanning devices in agreement with a parent or guardian, or after consulting a physician. Check with your state regarding tanning laws for minors!

– While there is no immediate clinical evidence of UVA exposure and its effects upon expectant mothers, it is strongly advised that expectant mothers be discouraged from using the tanning unit.

WARNING!

WARNING – RISK OF INFECTION! Infections can be transferred through skin contact.

All items/equipment components, with which the user can come into contact during tanning, must be disinfected after every tanning session: Protective goggles Acrylic sunbed Handles and control panel MP3 cable For fast, hygienic proper cleaning, use a specially developed fast disinfectant cleaner.

NOTE: Occasionally, persons using the tanning device will experience a slight reddening of the skin – usually in small patches – after the second or third session. This redness is often accompanied by an itching sensation. This may be nothing more than a heat “rash” caused by heat from the lamps within the device. It is generally very limited and caused by constant contact of the skin with the acrylic surface. It should go away within approximately 24 hours and should not reappear. This rashing can be lessened or prevented by applying moisturizer lotion to the affected area after the tanning session is completed. – Follow instructions. – The time between the first two tanning sessions must be at least 24

hours. – Increasing tanning also requires an extension of the exposure time (=

radiation time) or after a certain degree of tanning has been achieved,

Safety notices


a further intensification is not possible. However, the radiation time may not be extended as desired within the scope of the permissible radiation doses! Therefore, only a certain degree of final tanning dependent on the skin type can be achieved without endangering your health.

– Inform users about proper tanning.

3.3 Instructions pertaining to a risk of damage to the machine

CAUTION – DANGER OF OVERHEATING! Danger of overheating by obstruction of the air routing.

– Do not change, obstruct or block the air inflow and outflow area to the device or make any unauthorized changes to the device. The manufacturer shall bear no liability for damage or injuries resulting from such actions.

– Before putting a tanning device into operation, the transport pallet must be removed from under the device. Danger of overheating by obstruction of the air routing.

Description

10

4 Description

4.1 Device description

SUNDASH 32/1 SUPER POWER

1. Facial tanner (1 UV high-pressure lamps) 2. UV low-pressure lamps, base 3. Operating panel 4. Acrylic cover, base 5. Adjustable air nozzles face cooling 6. Body cooling air nozzles 7. UV low-pressure lamps, canopy 8. Interior lighting

Description


4.2 Accessories (optional)

9.Audio system (Stereo Sound System PLUS or Stereo Sound System)

9.1 Headphone conection (only with Stereo Sound System PLUS) 9.2 MP3 connection (only with Stereo Sound System PLUS)

4.3 Function description

The primary technical components of a tanning device are an artificial source of UV radiation, a variety of filters and reflectors as well as a mechanical structure with a defined active surface. Different tanning results can be achieved in varying strength tanning devices. On one hand, this is due to the different strength UV lamps and, on the other hand, the different UV-A and UV-B proportions of the UV radiation. Whereas the UV-A proportion primarily generates a superficial tan, which appears rapidly and is intensive but also fades more rapidly, the UV-B radiation is primarily responsible for more long-term tanning results. The disadvantage of the UV-B radiation is that the tan does not become visible until one or two days after visiting the tanning salon. As a result the appropriate tanning device is to be selected depending on the desired tanning goal. The tanning devices described here primarily emit UV-A radiation.

Operation

12

5 Operation

5.1 Operation overview

5.1.1 Navigation

The device is operated with the navigation ring.

Switch on UV lamps:

– Press the button once.

Switch off UV lamps/pause tanning:

– Hold the button down.

Select device function (go to pictogram)

e.g. MUSIC

Adjust the intensity/setting of the function selected.

The available functions and the navigation ring are illuminated in default mode after starting up the tanning device. After selecting a function, the respective LED and the navigation ring will flash for a few seconds. Settings may be changed during this time.

Operation


5.2 Functions

Function Button sequende Description Information

1. UV lamps START/STOP switch the UV lamps on / off during tanning

If the UV lamps are switched off during tanning, the tanning time continues to run.

3. Music Internal: Control volume, Levels 0-14 External: MP3 player

Only available as optional accessories for Stereo-Sound and Stereo-Sound PLUS. See page 15

4. Body cooling/ Facial cooling

Control cooling, Levels 1-5

Switch off cooling Switch on cooling

The air jets for the facial cooling can be adjusted by hand.

5. Facial tanner Switch off facial tanner Switch on facial tanner

1 minute until maximum power is reached.

Operation

14

5.3 Start

The device is started automatically with an internal or external timer.

NOTE: Timer instructions see separate manual (order no. 0070923801-..)

5.3.1 Preparation time

WARNING!

WARNING! Wrong positioning may result in overexposure!

To obtain the recommended exposure schedule position of a minimum distance of 1/2" (13 mm) measured with a standard ruler: – Lie on acrylic surface of lounge and lower canopy. Canopy will stop at

the correct distance from lounge acrylic surface.

11847 / 0

Before the UV lamps turn on, you have a few minutes to prepare yourself. During the preparation time you can switch on the UV lamps at any time by pressing the START/STOP button. – Remove your clothes and all jewelry. – Remove make-up and other cosmetics. – Remove glasses. Contact lenses can be worn under the protective

goggles. – Put on the protective goggles. – Lie down on the bed surface. – Close the canopy. – Press the START/STOP button.

Settings on start-up: UV lamps Facial tanner Cooling Stereo Sound System PLUS (optional)

5.3.2 Interrupt or end tanning session The tanning session ends automatically after the preset time has run down. The internal fan continues to run for approx. three (3) minutes to sufficiently cool the device. – To interrupt a tanning session, press button START/STOP anytime

during a session. – Press START/STOP again to restart the lamps.

Operation


5.4 MP3 player connection

WARNING!

WARNING! Danger of hearing damage!

Using earphones or headphones at high volume can result in permanent hearing damage. Improper maintenance can cause the device to be damaged or to become unusable. – Do not set the volume too high.

Studio customers can connect their own MP3 player to the device when the “Stereo Sound System PLUS” accessory is available

1 Jack plug (JK Part # 4630911001-..) provided for use by the studio operator (2 x 3.5 mm stereo jack plug). 2 MP3 player connection: see the documentation from the manufacturer of the MP3 player. Loud music might disturb other studio users! – Use headphones whenever necessary. Connect: – Plug the MP3 cable (stereo jack plug) into the Stereo-Sound system

PLUS. – Plug the MP3 cable into the MP3 player. – Select the music title and start in accordance with your MP3 player's

instructions.

If the speakers do not play any music:

– Increase the volume on the MP3 player until the music signal is automatically switched to the Stereo-Sound system PLUS.

– Set the volume on the tanning device to the desired level.

CAUTION! The heat might damage your MP3 player. Do not position the unit so that it receives direct tanning radiation. Cable may be torn off, connectors may be damaged. – Do not pull on cable when unplugging MP3 player.

Cleaning and maintenance

16

6 Cleaning and maintenance

For a description on how to carry out cleaning and maintenance work, see Operating Instructions Part I (1006322).

6.1 Cleaning plan

Component Interval Activity See Chap.1)

Afte

r eac

h ta

nnin

g

As

nece

ssar

y

50 h

1 Handle X Clean and disinfect

4.3

3 Control panel X Clean and disinfect

4.3

4 Acrylic panel X Clean and disinfect

4.3

5 Adjustable air nozzles

X Clean and disinfect

4.3

Protective goggles

X Clean and disinfect

4.3

MP3 cable X Clean and disinfect

4.3




Afte

r eac

h ta

nnin

g

As

nece

ssar

y

50 h

6 Air nozzles X Clean 4.3

7-8 Surfaces X Clean 4.3

2 Filter X Clean 4.3

1) See Operating Instructions Part I (1006322)

NOTE: Cleaning must be confirmed after each tanning session by pressing the START/STOP button (when the cool-down time for the main fan has finished).


18

6.2 Maintenance plan


500

h

1000

h

1500

h

3000

h

1 UV high-pressure lamps

X Replace 4.10

2 UV low-pressure lamps base

X Replace 4.9

4 UV low-pressure lamps canopy

X Replace 4.10

2 Starter X Replace 4.9



3 Acrylic base X Replace 4.5.1

1 Filter panels (UV high-pressure lamps)

X Replace 4.10

1) See Operating Instructions Part I (1006322)

Technical data


7 Technical data

7.1 Power rating, electrical specifications and noise level

Conformity mark (see name plate on page 23).

SUNDASH 32/1 SUPER POWER

Rated power without air condition: with air condition

5500 W

–

Rated frequency: 60 Hz

Rated voltage: 230 V

Fuse rating: 20 amp 3-pole or 40 amp 2-pole

Connecting lead:

Noise level at 1 m from the sunbed: 66,0 dB(A)

Noise level in sunbed: < 81 dB(A)

Load on the acrylic base: max. 300 lb/150 kg

Weight: 728 lb/330 kg

Technical data

20

7.2 Dimensions

B = 43 5/16 in 1100 mm

B1 = 27 15/16 in 710 mm

H = 43 5/16 in 1100 mm

H1 = 57 14/16 in 1470 mm

L = 84 10/16 in (without Sound System)

2150 mm (without Sound System)

L = 88 9/16 in (with Sound System)

2250 mm (with Sound System)

L1 = 84 10/16 in 2150 mm

BK = 94 1/2 in 2400 mm

TK = 90 9/16 2300 mm

Technical data


7.3 Lamp configuration

CAUTION!

The use of other UV lamps and filter panels voids the operating license!

The UV high-pressure lamps fitted are broadband radiators that can be operated at different outputs.

7.3.1 SUNDASH 32/1 SUPER POWER

Installed lamps

Num.

Lamp name, starter, filter panels Length Power level

Activation

Order no.

a) 1 1

UV high-pressure lamps Ergoline ULTRA C-12645 Filter panel Ultra Performance

400 W

400 W / 0 W

12645-..

1504566-..

b) 14 14

UV low-pressure lamps GENESIS HPR15 FR71-T12-BA-120W Starter 160 W

71 in 120 W

120 W

1504559-..

1004929-..

c) 14 14

UV low-pressure lamps GENESIS HPR15 FR78-T12-CA-120W Starter 160 W

78 in 120 W

120 W

1504562-..

1004929-..

c) 4 4

UV low-pressure lamps GENESIS HPR15 FR71-T12-CA-120W Starter 160 W

71 in 120 W

120 W

1504559-..

1004929-..

Technical data

22

7.3.2 Accent lighting

Num. Lamp name, starter Power Order no.

e) 1 1

Low-pressure lamp white Starter S10

36 W

12969-.. 10047-..

7.4 Spare parts and accessories

Num. Name Order no.

1 Acrylic base 1503569-..

3 Filter 55567-..

Appendix


8 Appendix

8.1 Signs and stickers on the device

Signs which warn of danger areas are attached to the device. The signs shown below are examples. Ensure that the instruction signs are always clearly recognizable and easily legible.

1 Nameplate

12075 / 0

JK Products and Services, Inc.#1 Walter Kratz Dr.Jonesboro, AR 724011�800�SUNDASH

ETL LISTEDPORTABLESUN/HEAT�LAMPS

MODEL NO.

SERIAL NO.

INTERTEK TESTING SERVICES NA INC.CORTLAND, NEW YORK, 13045

DATE MANUFACTURED A/C VOLTS A/C LAMPS

THIS PRODUCT IS IN CONFORMITY WITH PERFORMANCE STANDARDS FOR SUNLAMPPRODUCTS UNDER 21 CRF PART 1040:

C A U T I O N READ OWNERS MANUAL BEFORE INSTALLING. FOLLOW ALLMANUFACTURER INSTRUCTIONS COMPLETELY ND CAREFULLY.OBSERVE AND FOLLOW ALL CAUTION WARNINGS. INSTALLATIONSHOULD ONLY BE COMPLETED BY A QUALIFIED ELECTRICIAN.

The nameplate contains important information for identifying the device (e.g. the serial number = Serial-No.).

Appendix

24

2 Warning sticker

12076 / 0 3 USA mains connection sticker (1504659-..)

11995 / 0 The sticker is visible when the front panel is removed and the control unit cover opened.

4 USA power supply units sticker The sticker is visible when the front panel is removed and the control unit cover opened.

Index


9 Index

A Accessories .................................................................................................... 11 Acrylic cover, load .......................................................................................... 19 Air filter

Cleaning intervals ...................................................................................... 16 Air filter panels

maintenance intervals ............................................................................... 18

C Cleaning ......................................................................................................... 16 Cleaning intervals .......................................................................................... 16 Cleaning plan ................................................................................................. 16

D Definitions ........................................................................................................ 5 Description ..................................................................................................... 10 Device description .......................................................................................... 10 Dimensions .................................................................................................... 20

E Electric shock ................................................................................................... 7 Electrical specifications .................................................................................. 19

F Function description ....................................................................................... 11 Functions ....................................................................................................... 13

I Injury ................................................................................................................ 7 Installed lamps ............................................................................................... 21

M Maintenance plan ........................................................................................... 18 Measurements ............................................................................................... 20 MP3 player connection .................................................................................. 15

N Nameplate ...................................................................................................... 23 Navigation ring ............................................................................................... 12

O Overheating of the device ................................................................................ 9

Index

26

P Power rating .................................................................................................. 19 Powerinput .................................................................................................... 24

S Safety notices .............................................................................................. 6, 7 Settings on start-up ....................................................................................... 14 Signs and stickers ......................................................................................... 23 Skin types ........................................................................................................ 4 Start of tanning .............................................................................................. 14 Starter ........................................................................................................... 21

T Tanning times .................................................................................................. 4 Technical data ............................................................................................... 19 Technical service ............................................................................................ 2

U UV lamps ....................................................................................................... 21

W Warning sticker ............................................................................................. 24

O PERAT ING INSTRUCT IONS

SUN ERGOL I N E , A D I V I S ION OF JK- PRODUCTS & SERV ICES , IN C .

1 Walter Kratz DriveJonesboro, AR 72401Phone: 800.643.0086 (Toll-free)Fax: 870.935.3618Website: www.sunergoline.comE-Mail: [email protected]

10

08

46

1

SUNDA SH 32/1 SUP ER POWER

StartStop

SO URPX EE

T EI M

15 min

OPERATING INSTRUCTIONS - JK-Global Service · Read these operating instructions. Failure to observe these instructions: may result in serious injury and death, can result in damage

Documents