OpenFOAM in Wind Energy - foamacademy.com · Site assessment Optimize the yearly energy output Wind rose is site dependent (sometimes 360° necessary) Consideration of Coriolis force,

OpenFOAM in Wind Energy

GOFUN 2018, Braunschweig

Matthias Schramm

Fundamental research

Applied research

Fraunhofer IWES and ForWind

Oldenburg University started with wind physics

Research on wind fields, aerodynamics and turbulence

CFD is the link between the groups

Fraunhofer IWES transfers knowledge to industry

Teamwork

2

Agenda

Airfoil aerodynamics

Rotor aerodynamics

Site assessment

Other topics

3

2D-RANS

Steady 2D-RANS → computationally cheap

Fully resolved boundary layer

Hexahedral meshes

Use of different turbulence models

k–ω-SST

Spalart-Allmaras

γ-Reθt-SST

k–ω-SST-γ

Automatized polars via scripts for small and medium angles of attack (not 360°)

Lift and drag polars using improved coefficients w.r.t. the standards

4

Stall Prediction in 2D-RANS

Calibrated coefficients for better stall prediction Tripped airfoil at Re=3·106 k–ω-SST

5

Standstill with 2.5D-DDES

Source Cl / - Cd / -

IWES CFD 0.09 1.7

Experiments 0.11 1.9

DTU CFD 0.09 2.3

URANS not suitable for fully separated flow

DDES can improve accuracy for very high angles of attack (standstill)

360°-polars with DDES

DU 96-W-180, Re=2·106, 3 million cells

6

Modelling of vortex generators in CFD

Better performance in blade root region Installed as Add-Ons on existing blades Not always included in design phase Use of BAY model (1999) Source term in momentum equation

www.högrehöjder.com

www.3m.com/wind

© micro Aerodynamics

7

Modelling of vortex generators in CFD

www.högrehöjder.com

www.3m.com/wind

© micro Aerodynamics

Exp.

8

Agenda

Airfoil aerodynamics

Rotor aerodynamics

Site assessment

Other topics

9

BladeBlockMesher

Automatic, fast meshing tool for wind turbine rotor blades developed by IWES

Only airfoil coordinates and their position required

Based on hexahedral meshes (elliptic or hyperbolic equations)

Rahimi, H., Daniele, E., Stoevesandt, B., Peinke, J.: Development and application of a grid generation tool for aerodynamic simulations of wind turbines. Wind Engineering, 40(2), 148-172 (2016) doi: 10.1177/0309524X16636318

10

Very few experiments exist

Limited wind tunnel size

Limited Reynolds numbers

Validation of CFD: Wind Turbine Rotors

NREL Phase VI turbine (10 m diameter) MEXICO turbine (4.5 m diameter)

11

Rahimi, H., Medjroubi, W., Stoevesandt, B. and Peinke, J. (in press) Progress in Computational Fluid Dynamics, ‘Navier-Stokes-based predictions of the aerodynamic behaviour of stall regulated wind turbines using OpenFOAM’,

25

m/s

at

30

%

Validation of CFD: NREL Phase VI

Stall regulated turbine (10 m diameter) Upwind and downwind measurements in NASA-Ames wind tunnel Experimental pressure distribution and loads for different sections available

12

CFD for modern wind turbine rotors

Wind turbines are getting larger

Light weight blade design Blade flexibility increased

Non-linear interaction between aerodynamics and structure

Fluid-Structure Interaction (FSI)

Coupling of flow and structural solver

Source: Siemens

13

Our FSI approach

FSI framework developed in Oldenburg

OpenFOAM and additional implementations

Steady-state or dynamic simulations

Runtime post-processing (AoA)

In-house grid deformation

Finite Element framework

Geometrically exact beam theory (GEBT)

Supports large deformations and torsion

6x6 section properties

+

14

NREL 5 MW turbine under yawed inflow

15

Clear effect on aerodynamic loading

Rigid CFD under-predicts forces

Blade deformations have clear effect

Tangential

NREL 5 MW turbine under yawed inflow

16

Big drawback of downwind turbines: Blade-tower interaction

Idea: Use lattice structure towers instead of tubular towers

NREL 5 MW in downwind configuration

NREL 5MW Downwind turbine and tower shadow

17

Time-accurate Delayed-Detached Eddy Simulation (DDES)

Comparison of sectional blade loading for both tower types

Fluid-structure coupling for blades for higher fidelity

NREL 5MW Downwind turbine and tower shadow

18

Similar mean values (deviation < 1%)

Clear deviation in time resolved results

Wider tower shadow with lattice tower

Significant velocity drop for lattice tower

2D approach for lattice tower not valid

Downwind turbine and tower shadow

19

Agenda

Airfoil aerodynamics

Rotor aerodynamics

Site assessment

Other topics

20

Site assessment

Optimize the yearly energy output

Wind rose is site dependent (sometimes 360° necessary)

Consideration of Coriolis force, complexity of terrain, forests etc.

Thermal stratification needs to be considered (stability classes)

Chang, Chi-Yao, et al. "A consistent steady state CFD simulation method for stratified atmospheric boundary layer flows." Journal of Wind Engineering and Industrial Aerodynamics 172 (2018): 55-67.

stable neutral unstable

21

Inclusion of forests

Automatic detection of forest from simple graphics file

Use of porous cells as sinks in the momentum equation

Also turbulence equations need to be considered

22

Inclusion of forests

23

Automatic detection of forest from simple graphics file

Use of porous cells as sinks in the momentum equation

Also turbulence equations need to be considered

Simulation

Reference

Wind distribution

Prediction of wind distribution at other location

Validation by met mast data

Simulation of complex terrain

24

Prediction at

different point

Wind distribution

25

Reference

Prediction of wind distribution at other location

Validation by met mast data

Simulation of complex terrain

In-house mesh generation (incl. smoothing)

Automatic mesh refinement

Modelling turbines as actuator disks

CFD of wind farms

26

Agenda

Airfoil aerodynamics

Rotor aerodynamics

Site assessment

Other topics

27

Other topics

28

Shape optimization using the adjoint approach

Aeroacoustics

Turbulent inflow

Add-Ons

Wave interaction

Multi-phase flow for offshore turbines

Tower design and load computation

Volume-of-Fluid approach (olaFoam)

20 million cells

7 m diameter

29

OpenFOAM offers possibility to simulate every interesting CFD in wind energy

Airfoil & rotor aerodynamics

Aeroacoustics

Fluid-Structure Interaction

Turbulent inflow

Site assessment

Wave forces on turbine towers

Some in-house developments and extensions necessary

Conclusions

30

Acknowledgements Fraunhofer IWES is funded by the:

Federal Republic of Germany Federal Ministry for Economic Affairs and Energy

Federal Ministry of Education and Research

European Regional Development Fund (ERDF):

Federal State of Bremen

Senator of Civil Engineering, Environment and Transportation

Senator of Economy, Labor and Ports

Senator of Science, Health and Consumer Protection

Bremerhavener Gesellschaft für Investitions- Förderung und Stadtentwicklung GmbH

Federal State of Lower Saxony

Free and Hanseatic City of Hamburg

31

Thank You For Your Attention!

Any questions?

[email protected] [email protected]

32