Open Plan Long and Low Bookcase - Blu Dot...1 | 844.425.8368 OPEN PLAN LONG AND LOW BOOKCASE 8041 An - p Bracket 8042 An - p Strap Back Panel QTY 2 Front Corner Upright QTY 2 Pt. 8054

Open Plan Long and Low BookcaseD E S I G N E D I N 2 0 1 9

A S S E M B LY N O T E S | R E V 0 1

N E E D A H A N D ?

Contact us at [email protected] or 844.425.8368 for assistance.

@ B L U D O T

We design all our pieces in our Minneapolis studio. Follow along on Instagram for some sneak peeks into the process.

1 | 8 4 4 . 4 2 5 . 8 3 6 8 O P E N P L A N L O N G A N D L O W B O O K C A S E

8041An�-�p Bracket

8042An�-�p Strap

Back Panel

2QTY

Front Corner Upright

2QTY

Pt. 8054

Pt. 8053

4

8

QTY

QTY

Pt. 4022

6QTY

Pt. 1690

Pt. 1693

Pt. 9016

6

1

QTY

QTY12

Parts & Hardware

Pt. 1217

4QTY

Pt. 1218

4QTY

Pt. 8041

QTY

Pt. 8042

2QTY4

Parts & Hardware

S E R V I C E @ B L U D O T. C O M | 2A S S E M B LY N O T E S

Rear Left Corner Upright

Front Center Upright

1

1

QTY

QTY

Rear Right Corner Upright

Rear Center Upright

Shelf Panel

Top Panel

1

1

2

1

QTY

QTY

QTY

QTY

Parts & Hardware

pin holes

pin holes

pin holes on both sides

Parts & Hardware

3 | 8 4 4 . 4 2 5 . 8 3 6 8 O P E N P L A N L O N G A N D L O W B O O K C A S E

PT. 1690 x 4 PT. 1693 x 2 PT. 9016 x 1

front corner upright

front corner upright front center

upright

Step 01AT TA C H S H E L F PA N E L S T O F R O N T U P R I G H T S .

Attach the shelf panels to the front uprights using the provided hardware as shown.

Note that front uprights do not have pin holes.

S E R V I C E @ B L U D O T. C O M | 4A S S E M B LY N O T E S

PT. 1693 x 2 PT. 9016 x 1

Step 02AT TA C H R E A R C E N T E R U P R I G H T.

Attach the rear center upright to the shelf panels using the provided hardware as shown.

5 | 8 4 4 . 4 2 5 . 8 3 6 8 O P E N P L A N L O N G A N D L O W B O O K C A S E

PT. 8053 x 8

Step 03AT TA C H B A C K PA N E L S T O R E A R C E N T E R U P R I G H T.

Place metal pins in the center rear upright and align with back panel pieces as shown.

S E R V I C E @ B L U D O T. C O M | 6A S S E M B LY N O T E S

PT. 1690 x 4 PT. 9016 x 1

Step 04AT TA C H R E M A I N I N G U P R I G H T S .

Attach the remaining rear corner uprights using the provided hardware as shown. Ensure that the back panel pins align with the uprights.

7 | 8 4 4 . 4 2 5 . 8 3 6 8 O P E N P L A N L O N G A N D L O W B O O K C A S E

PT. 4022 x 6

Step 05I N S TA L L A D J U S TA B L E G L I D E S .

Install adjustable glides to the bottom of the uprights as shown. Ensure that the uprights are level prior to using the product.

S E R V I C E @ B L U D O T. C O M | 8A S S E M B LY N O T E S

PT. 1690 x 4 PT. 1693 x 2 PT. 9016 x 1

Step 06AT TA C H T O P PA N E L .

Attach the top panel using the provided hardware as shown.

9 | 8 4 4 . 4 2 5 . 8 3 6 8 O P E N P L A N L O N G A N D L O W B O O K C A S E

PT. 1217 x 4

8041An�-�p Bracket

PT. 8041 x 2

Step 07AT TA C H A N T I -T I P B R A C K E T S T O B O O K C A S E .

Brackets must be installed to the back rail of the top panel. In order to prevent damage, it is recommended that 3/32” pilot holes be drilled prior to installation.

Note: Ensure that the depth of the pilot hole does not exceed 1/2”. A deeper pilot hole may be visible on the opposite side.

S E R V I C E @ B L U D O T. C O M | 1 0A S S E M B LY N O T E S

PT. 1218 x 4PT. 8054 x 4

8041An�-�p Bracket

PT. 8041 x 2

1” lower than top panel

OR

wall

wall

Step 08AT TA C H A N T I -T I P B R A C K E T S T O W A L L .

Wall anchors and fasteners are included for installation into drywall. Please consult your local hardware professional to determine the hardware best suited for your wall type.

If the mounting locations are positioned on a stud, the installation of wall anchors may be skipped. Instead, drill 7/64” pilot holes in the marked positions and install anti-tip bracket with provided hardware as shown.

If the mounting locations are not positioned on a stud, drill 15/64” holes into the marked locations and press wall anchors into the drilled holes and install anti-tip bracket with provided hardware as shown.

B L U D O T D E S I G N & M A N U F A C T U R I N G , I N C . D E S I G N E D I N M I N N E A P O L I S , M N

8042An�-�p Strap

PT. 8042 x 2

Additional Information

CLEAN

Clean with a slightly damp, soft cloth. To remove dirt and fingerprints, use quality cleaners formulated for wood furniture. Wipe completely dry with a soft cloth in the direction of the wood grain.

Step 09S E C U R E B O O K C A S E .

Install and tighten wall straps prior to using the product.