SEMPIONE PASS SWITZERLAND S. GOTTARDO PASS SWITZERLAND - FRANCE S. BERNARDINO PASS SWITZERLAND - AUSTRIA GERMANY BRENNER AUSTRIA GERMANY VARESE COMO BERGAMO VERONA GALLARATE MALPENSA AIRPORT RHO LEGNANO BRESCIA TRENTO BOLZANO BUSTO ARSIZIO LUGANO NOVARA Tangenziale OVEST Tangenziale EST ORIO AL SERIO AIRPORT LINATE AIRPORT MILANO E35 E43 E35 A9 A26 A26 A26 A8 A8 A4 A4 A4 A4 A A4 A22 A22 Rigid Foil extrusion technology Corso Sempione, 120 21052 Busto Arsizio (VA) ITALY OPEN HOUSE Busto Arsizio, Oct 08 - Nov 08 2013 (Sunday excluded) TECHNICAL DATA Bandera Premises in Busto Arsizio (the location) is easily (10 minutes!) reachable from Milan Malpensa International airport. Visit shall be arranged upon request. For booking services, please refer to Bandera Staff at the company fair booth mobile +39 340 3788399 or Bandera phone +39 0331 398340 or submit your request at the following e-mail address: [email protected]. At the same time of K2013, at the new R&D area at our premises in Busto Arsizio, Bandera will organize an Open House during which will be tested an innovative co-extrusion 3-layer rigid PET/PP foil line for thermoforming (food packaging); line output exceeds 1200Kgh. The line is equipped with cutting edge L/D 52 co-rotating twin screw extruders, capable of ensuring optimized melt purification; a special horizontal-configuration cooling and polishing calender to suit very thin thicknesses -150µm for PET and 280µm for PP- on foil width up to 1450 mm.