ONTR+ CATV Indoor Opcal Node is an Opcal/RF converter to be used at the entry points of mul-dwelling units on RFOG and FTTB networks. ONTR+ has Automac Gain Control (AGC), Burst Mode CWDM Laser and oponal frequency bandwidth splits for various networks. ITU CWDM (1270 nm...1610 nm) lasers for return transmier provides OBI free soluon for 8 MDU units and 1218 MHz on forward path enables DOCSIS 3.1 compliance. ONTR+ MDU RFOG - 1.2 GHz CWDM Burst Mode| DOCSIS 3.1 www.tron.com.tr 1 DOCSIS 3.1 Compable DOCSIS 3.1 enables higher data speeds with a more efficient spectrum and reduc- es network delay. Large Opcal Input Range Extended opcal input level range (-6 dBm to +1 dBm) for maximum flexibil- ity . Automac Gain Control (AGC) Built-in AGC tracks input opcal level changes and provides constant RF output level. CWDM Laser for OBI Free Networks ITU CWDM (1270 nm...1610 nm) lasers for return transmier provides OBI free solu- on for 8 MDU units. Forward (Down-Stream) Opcal Features (RX) Wavelength 1550 nm (oponal 1310 nm) Input Opcal Power -6…+1 dBm (with AGC) RF Features Forward Bandwidth Opons 54 - 1218 / 85 - 1218 / 105-1218 MHz Slope Control 20..0 dB Test Point - 20 dB Return Loss -16 dB Receiver Noise Current < 7 pA /√Hz RF Output Level (100 dBuV, 0dBm Opcal Input, CENELEC 42 ch, OMI %3,8) CTB 60 dBc CSO 60 dBc Return (Up-Stream) Opcal Features (TX) TX Laser Opons ITU CWDM (1270 nm...1610 nm) | Burst Mode Opcal Output Power 2 mW (3 dBm) TX Turn On/Off Time < 1.0 μs RF Features Reverse Bandwidth Opons 5 - 42 / 5 - 65 / 5-85 MHz Input Level Control 20..0 dB Test Point - 20 dB Return Loss -16 dB Link Performance (6dB link loss, 10 km fiber + opcal aenuator) Opt. TX Input Level 18 dBmV (min. 8, max. 27 dBmV) Max. NPR max. 53 (at 22 dBmV input) General Features Connectors 1 F type RF In/Out 1 F Type Test Forward/Reverse 1 SC/APC Opcal In/Out Surge Protecon IEEEC62.41 Cat.A3 (6kV,200A) Powering 170-240 VAC Power Consumpon 8 Wa Operang Environment Temperature -30…+55 C° Housing IP54 class protecon, diecast housing Dimension and Weight 105 x 125 x 50 mm and 0,65 kg - PRELIMINARY - TS_ONTR+_V1_Dec16