LaserCEM® Connuous Emissions Monitoring System Descripon The LaserCEM is a complete pre-calibrated mulcomponent (NO, NO2, NOx, SO2, CO, HCl, CO2, H2O, H2S, NH3, N2O, COS, SO3, CH4, HF) laser Infrared Spectrometer. LPS The LaserCEM features the exclusive LPS Low Pressure Sampling System enabling efficient installaon and reduced operang cost by eliminang the need for “heated” sampling system. OFCEAS The LaserCEM uses the patented OFCEAS (WO 03031949) IR laser technology for enhanced specificity, selecvity, accuracy and stability (no span or zero driſt ). LaserCEM® Key Features 1300 850 862 I www.aquagas.com.au I [email protected] I 3 Wirranina Place - Currumbin - 4223 QLD True Direct Extracve CEMS (No sample treatment) - 100mbar sampling pressure removes any risk of chemical adsorpon, desorpon and condensaon along the sample line. Interferences Free - OFCEAS technology provides exceponal selecvity, enabling simultaneous monitoring of mulcomponent without interferences, regardless of the gas matrix. Ease of integraon - The LaserCEM allows digital (Ethernet, RS485, RS232, ModBus) analogue and TDR IOs. No Driſt - The zero is contained in the signal, enabling automated and intrinsic zero driſt compensaon. Field proven - The LaserCEM is free of opcal moving part and was designed and built strictly for industrial and on-board mobile applicaons. Low maintenance - The LPS system allows flow low rates within 3 and 9l/h without affecng the response me and re- ducing considerably dust and materials build-up. Applicaons The LaserCEM is designed for Connuous Emissions Monitoring in a large field of applicaon including gas and coal fired power staon, pharmaceucal and chemical industries, refineries, cement plants and waste incinerators and more...Highly durable to harsh process condions , the LaserCEM is a field proven, reliable, robust, cost-effecve and user friendly soluon for Connuous Emissions Monitoring. AP2e The LaserCEM is designed and manufactured by AP2e in France and uses patented analysis and sampling technologies .