ONLINE AUCTION Perfection Industrial Sales ph +1-847-545-6374 • fax +1-847-427-8884 www.perfectionindustrial.com Online Bidding at www.perfectionindustrial.com Sale is Being Held in Conjunction With: Ph +1-847-673-0570 www.allinindustrial.com Sale Closing From: Wednesday, November 6 at 11:00 AM ET Inspection: Tuesday, November 5 from 8:00 AM–4:00 PM ET or By Appointment Sale Locations: 6098 Alden Nash Ave. SE, Alto, Michigan 49302 LARGE CAPACITY CNC MACHINE SHOP – FULL FACILITY CLOSURE FEATURING: Large Capacity CNC Bridge Mill, CNC Vertical Machining Centers, Try-Out Press, Tool Room, Free Standing Crane Systems, Facility Support, Forklifts, Vehicles & More METHODS/FEELER SDM-47266 CNC BRIDGE MILL HURCO VMX64 VERTICAL MACHINING CENTER CLEARING F-4500-148 STRAIGHT SIDE 4-POINT PRESS 500-TON 2005 2012
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Sale Closing From: Wednesday, November 6 at 11:00 AM ETInspection: Tuesday, November 5 from 8:00 AM–4:00 PM ET or By AppointmentSale Locations: 6098 Alden Nash Ave. SE, Alto, Michigan 49302
LARGE CAPACITYCNC MACHINE SHOP – FULL FACILITY CLOSUREFEATURING: Large Capacity CNC Bridge Mill, CNC Vertical Machining Centers, Try-Out Press, Tool Room, Free Standing Crane Systems, Facility Support, Forklifts, Vehicles & More
METHODS/FEELER SDM-47266 CNC BRIDGE MILL
HURCO VMX64 VERTICAL MACHINING CENTER CLEARING F-4500-148 STRAIGHT SIDE 4-POINT PRESS
500-TON2005
2012
CNC BRIDGE MILL, VERTICAL MACHINING CENTERS
HURCO BMC4020 VERTICAL MACHINING CENTER ASSORTED TOOLING AND TOOL CARTS
Sale Closing From: Wednesday, November 6 at 11:00 AM ETInspection: Tuesday, November 5 from 8:00 AM–4:00 PM ET or By AppointmentSale Locations: 6098 Alden Nash Ave. SE, Alto, Michigan 49302
View our current auction schedule at www.perfectionindustrial.com
HURCO VMX50S VERTICAL MACHINING CENTER
CNC BRIDGE MILL2012 METHODS/FEELER SDM-47266 CNC BRIDGE MILL, s/n 45823, w/Fanuc 32i-B CNC Control, 165"-X, 160"-Y, 39"-Z, 87" x 158" T-Slot Table, 103" Between Columns, 48" Under Rail, 50 Taper Spindle, 6,000 RPM, 40-ATC, High Pressure Coolant Through Spindle, Chip Conveyor w/Dual Chip Augers, Jet Air Filtration System
STRAIGHT SIDE PRESSES & PRESS FEED EQUIPMENT500-TON CLEARING F-4500-148 STRAIGHT SIDE 4-POINT PRESS, s/n 47-14115-P, 24" Stroke, 45-5/8" Max. Shut Height, 20" Ram Adjustment, 8 SPM, 96" x 144" Power Roll Out Bolster, 63" Window, Hydraulic Nuts on Tie Rods, Cisco Tonnage Monitor250-TON BLISS S2-250-84-48SSDC STRAIGHT SIDE DOUBLE CRANK PRESS, 12" Stroke, 25" Shut Height, 84" L-R x 48" F-B Bed, 25 SPM, 10" Ram Adjustment, 24" WindowsASSORTED DALLAS FEEDER/STRAIGHTENERS, AMERICAN COIL REEL
CONVENTIONAL MACHINE TOOLSLODGE & SHIPLEY POWER TURN 20" X 60" ENGINE LATHE, s/n 45823, 12" 3-Jaw Chuck, 2-1/8" Hole Through Spindle, Quick Change Tool Parts, Tailstock, Taper Attachment w/4-Jaw Chuck, Face Plate, Miscellaneous ToolingCARLTON RADIAL ARM DRILL, 60" Arm, 17" Column, (2) 9" x 14" High Riser, T-Slot BaseMORRIS MOR-SPEED RADIAL ARM DRILL, 48" Arm, 10" Column, 18" x 24" T-Slot Box Table, T-Slot BaseWYSONG 52" X 10GA MECHANICAL SHEAR, Back Gauge, Foot ControlKENT KG941DAHD 16" X 40" AUTOMATIC SURFACE GRINDER, s/n 820422, 16" x 40" Electromagnetic Chuck, DRO, Incremental Down Feed w/Counter, Spark OutGALLMEYER LIVINGSTON GRAND RAPIDS 676 16" X 48" HYDRAULIC SURFACE GRINDER, s/n 676135, 16" x 48" Electromagnetic Chuck, 1-1/2" x 20" Wheel
To discuss your requirements for an auction, please call Perfection
Industrial +1-847-427-3333
250-TON
CLEARING F-4500-148 STRAIGHT SIDE 4-POINT PRESS
500-TON
VEHICLES, PLANT SUPPORT & MOREVEHICLES10,000 LB HYSTER S100E LP FORKLIFT, s/n C004DD5004H, 60" Forks, 2-Stage Mast, Hard Tires, Monocontrol, 2,375 Hours6,000 LB HYSTER LP FORKLIFT, 42" Forks, 2-Stage Mast, HI/LO Range, Hard Tires, 3,559 Hours2,000 LB CROWN ELECTRIC WALK BEHIND FORKLIFT, S/N A86556, 42" Forks, 72" Max. Fork Height2005 GMC 2500 HD SIERRA CREW CAB PICKUP TRUCK, VIN 1CTHK23005F846205, 4WD, Automatic Transmission, Vortec V-8 Engine, Stereo, Spray-in Bed Liners, Spare Tire, Reese Hitch, Garmin, 358,638 Miles2004 GMC C6500 DIESEL FLAT BED TRUCK, VIN 1GDT3C1C54F513563, Caterpillar Engine, Spicer 7-Speed Manual Transmission, 12' Bed w/Side Racks, Dual Rear Wheels, Side Saddle Fuel Tank, Stereo, 126,652 Miles
PLANT SUPPORTATLAS-COPCO GA15FF ROTARY SCREW AIR COMPRESSOR, s/n HOP900234, w/Manual, FiltersATLAS-COPCO GA-18 ROTARY SCREW AIR COMPRESSOR, s/n AII216333, 49,054 HoursMACAIR HX125A-1 AIR DRYER, s/n 09-11-107645
ECSA 10-TON BRIDGE CRANE W/KONE FEM IΑ HOIST
ATLAS-COPCO GA15FF ROTARY SCREW AIR COMPRESSOR KURT VISES
10-TON FREE STANDING CRANE SYSTEM, Approx. 36' Span x 160' Long, w/(1) Shaw-Box 10-Ton HoistECSA 10-TON BRIDGE CRANE, W/KONE FEM IΑ 10-TON HOIST, s/n LLC-12, 36' Single Grider Bridge, Pendant Control (No Runway Included)ALSO AVAILABLE: WELDERS, WELDING SUPPLIES, POWER AND HAND TOOLS, PERISHABLE TOOLING, MILLS, DRILLS, TAPS, REAMERS, JACOBS CHUCKS, PALLET RACKING, OFFICE FURNITURE, SHOP FURNITURE, CLAMPING, WORK HOLDING FIXTURES, MAGNETS, SINE PLATES, RAW MATERIALS, INSPECTION EQUIPMENT, STEEL HORSES, BOLSTER PLATES, SHOP SUPPLIES, SPARE PARTS, SCRAP STEEL
To discuss your requirements for an auction, please call Perfection Industrial +1-847-427-3333
View our current auction schedule at www.perfectionindustrial.com
TERMS OF SALEAn 18% buyer’s premium will be charged on all assets. The buyer’s premium will be reduced to 16% for payments made by means of cashier’s check or wire transfer within 48 hours of sale close. If paying by company check, a paid in full invoice will be issued upon the check clearing. Credit card payments are limited to a maximum of $2,000. All items are sold “As is, Where is” without any warranty, express or implied.
Sale Closing From: Wednesday, November 6 at 11:00 AM ETInspection: Tuesday, November 5 from 8:00 AM–4:00 PM ET or By AppointmentSale Locations: 6098 Alden Nash Ave. SE, Alto, Michigan 49302
QS-0022070
REMOVALAll purchased lots must be removed no later than Friday, November 22. Removal hours are Monday through Friday, from 8:00 AM to 4:00 PM ET. Extended hours or weekends may be accommodated with prior appointment. Anyone removing purchased items with a lift truck or another powered vehicle must have a certificate of insurance with a $2M General Liability policy, and that certificate must be provided to the auctioneer for review and approval prior to the auction.
FOR FURTHER INFORMATIONFor further information contact Jennifer Reiner at +1-847-545-6374 or [email protected]. For accounting and invoicing questions, contact Inesa Dicpetris at +1-847-427-3333 or [email protected].