Descriptive Diagram............................................................................................................... 1Cautionary Notice..................................................................................................................... 2General Description................................................................................................................ 3Installation Instructions................................................................................................ 3-7Plumbing Connection.......................................................................................................... 4Connection of Flushing Unit.......................................................................................... 4Screw Installation Guide............................................................................................. 5-6Installation Complete........................................................................................................... 7Normal Operating Procedures.................................................................................. 7Troubleshooting................................................................................................................... 8-9Cleaning and Servicing..................................................................................................... 9Warranty Information........................................................................................................ 10Returns and Servicing......................................................................................................... 11Warranty Requests................................................................................................................ 11
DESCRIPTIVE DIAGRAM
Flat concrete floor Wall nail
Fixation bracket Fixation bracket screw Wall nail tray Fixing screw of the toilet seat
Wall nail cover Toilet seat
STEP 1Drill a hole in the wall and screw nail (2) into the hole.
STEP 2 Place the fixation bracket (3) and tighten with screws (4).
STEP 3Put on the toilet seat(8).
STEP 4Insert the wall nail tray(5) in the anchor hole of the toilet seat and tighten the fixing screw (6) and put on the wall nail cover(7).
After installation, please check if the toilet seat is firm or not, if not, please check again if all the parts were installed rightly.
NORMAL OPERATING PROCEDURESOur appliances are designed to discharge fecal matter and toilet paper only. Some small items may however pass through the pump. But larger items unfortunately can block the pump. This is the main cause of breakdown record by our customer support department.
CLEANING AND REMOVAL OF SCALE To clean the bowl and remove scale, use regular bathroom cleaning products. We recommend CLR descaler fluid at least once a month.
The frequency of the cleaning depends on the hardness of the water in your area.
To avoid accumulations of scale inside the motor,we advise you to clean it regularly. To do so:
•Shut off the water supply•Flush the toilet•Pour one liter of bathroom cleaning product (or vinegar) in the bowl•Leave sit for a few hours•Open water supply and flush the toilet several times.
Do not use any acids, caustic sodas, or solvents.
9
10
_ _______________________________
__________ ____________________
___ ___________
___________ ________________
_________ __________
11