www.omnicharge.co Technical Specifications
OMNICHARGE: TECHNICAL SPECIFICATIONS
1. Introduction 2. Applications
3. Technical Specifications 4.Safety Features
Engineered by power management experts from ground up, Omnicharge is equipped with intelligent charging technology to set a new parameter for portable power banks.
Omnicharge is a smart power bank that fits right into the palm of your hand. This portable device is equipped with advanced power management technology, featuring custom designed smart PCB.
The two models, Omnicharge 13600mAh and 20400mAh can deliver an unmatched efficiency and reliable charging.
INTRODUCTION
• 2 USB Ports, AC/HVDC Port • Sleek Design • Compact Size • Safety Protection System • Intelligent Charging Algorithm • Flow-Through Charging • OLED Screen Display • 1 Year Warranty
Key Features
• Charging Capacity: Omnicharge [email protected]/49Wh Omnicharge [email protected]/73Wh
• Dimensions: 13600mAh: 5.2 X 3.3 X 0.9 inches; 135 x 85 x 23.5mm 20400mAh: 5 X 4.8 X 1 inches; 127 x 122 x 27mm
• Weight: omnicharge 13600mAh: 365g, 0.8lb omnicharge 20400mAh: 600g, 1.4lb
• Normal Operating Usage Temperature: 0-45oC • Certifications: FCC, CE, UN38.3
Spec in Glance
Omnicharge
Omnicharge “Fast” AC Charger Product Specifications:
Owner’s manual
USB to 5V 5.5mm DC Cable Connector Product Specifications:
WHAT’S IN THE BOX
• Tip 1 - 6.5mm x 4.4mm (Sony) • Tip 2 - 4.0mm x 1.7mm (HP) • Tip 3 - 4.8mm x 1.7mm (Asus Eee PC ) • Tip 4 - 5.5mm x 1.7mm (ACER) • Tip 5 - 5.5mm x 3.0mm (Samsung) • Tip 6 - 5.5mm x 2.5mm (Lenovo) • Tip 7 - 6.3mm x 3.0mm (Toshiba) • Tip 8 - 2.5mm x 0.7mm (ASUS) • Tip 9 - 7.4mm x 5.0mm (Dell) • Tip10 - 4.5mm x 3.0mm (Dell)
• Cable Length: 80cm, 31.4in • Pin Size: Outer 5.5mm, Inner 2.1mm • Input Power: 5V, 2.0A • Output Power: 5V, 2.0A
• Dimensions: 63 x 63 x 28.5mm • Cable Length: 1m, 39.4in • Weight: 148g, 0.3lb • Pin Size: Outer 5.5mm, Inner 2.1mm • Input Power: 100-240V, 1.2A, 50-60Hz • Output Power: 19V, 0-1.75A, 33.5W (Max)
Product Advantage:• Gold plated USB connector: decreases contact resistance,
prevents overheating and increases efficiency
Universal Connector Product Specifications:
• AC/DC Inverter Usage • USB Output Connection On/Off • Auto Shut Off (time)
Ports specs Omnicharge 13600mAh Omnicharge 20400mAh
Nominal capacity 13600mAh 20400mAh
Number of Battery Cells 4 6
USB Output Voltage5V/4.8A for single output, When both USB ports are connected, maximum total output level is 4.8A
AC Output Voltage 120V 120V
AC Output Frequency 60 Hz 60 Hz
AC Output Power (Max) 65W 100W
DC Output Voltage 150V 150V
Input Voltage 4.5V-80V 4.5V-80V
Input Power 1W-34W 1W-40W
Charging Time 2 Hours(min) 3 Hours(min)
Battery Efficiency 90% (Maximum) 90% (Maximum)
Customisable Features:
Connected to CPU on SPI (Serial Peripheral Interface), OLED Screen displays real time information. • Charging status for USB, AC/DC Output • Power Input status / rate (watt) • Power Output status / rate (watt) • Power Output status (time remaining) • Battery Level (+/- 1%) • Temperature (in oC)
•Calculated based on optimal level of power input for your device and Omnicharge’s battery level
Information on OLED:
Universal Charging Port
AC PortOLED Screen
Power Button
USB On/Off
AC/DC On/OffUSB Ports
GENERAL TECHNICAL SPECIFICATIONS
Power Supply Duration
Omnicharge Fast Charger 2 hours
Laptop Adapter (19V/2.4A-4.74A
0
2 Hours
AC/DC Charging adaptor 2 Hours
USB Port 5-10 Hours
Solar Panel (9W) 8-16 Hours
Solar Panel (12W) 6-12 Hours
Car Power Port 2-3 Hours
Electric Scooter Charger (48V/2A) 2 Hours
Electric ToyCharger (14.2V/1A) 4-6 Hours
CHARGING:With integrated intelligent power management system, Omnicharge has an universal
charging port. There are multiple ways to charge your Omnicharge:
Charging Time:
Omnicharge “fast” Charger
Laptop Adaptor
AC/DC Charging Adaptor
USB Port
Solar Panel
Car Power Port
Electronic Scooter Charger
Electronic Toy Charger
AC Port Charging 4.5V-80V
Professional Laptops Omnicharge 13600 Omnicharge 20400
Apple MacBook 12-inch 9 hours, 1 Full Charge 13 hours, 1.5 charge
Apple MacBook Air 13.3-inch 8 hours 13 hours, 1 Full Charge
Apple MacBook Pro 13.3-inch 5 hours 7 hours
Apple MacBook Pro 15.4-inchRecommend to purchase the Omni 20 Omni 13’s can only support 65W output 5 hours
Dell XPS 13-inch 12 hours, 0.7 Charges 18 hours, 1 Full Charge
Samsung Ativ Book 9 8 hours, 0.7 Charges 12 hours, 1 Full Charge
Microsoft Surface Pro 4 12.3-inch 9 hours, 1 full charge 13 hours, 1.5 Charge
For single output 5V/4.8A, When both USB ports are connected sum of both inputs do not exceed 4.8A
Omnicharge is capable of powering professional laptops, smart devices, and home appliances from its AC/HVDC port and 2 fast charging USB ports.
POWERING YOUR DEVICES:
Appliances and Small devices Omnicharge 13600 Omnicharge 20400
Smartphone (5-7 Watt-Hours) 4-6 Charges 6-9 Charges
GoPro® (5 Watt-Hours) 5-6 Charges 7-8 Charges
Digital Camera (8 Watt-Hours) 4 Charges 6 Charges
Tablet (25-42 Watt-Hours) 1-2 Charges 1-3 Charges
Bose SoundLink® Mini 2 3 charges 4.5 Charges
Philips PPX3415 (Pocket Projector) 3 hours, 3 charges 5 hours, 5 charges
Samsung UA32J40SW 32-inch (LCD TV) 1-2 Hours 2-3 Hours
TCL D32E161 32-inch (LCD TV) 1-2 Hours 2-3 Hours
120V AC / 150V DC portUniversal Charging Port
• CPU Power Module • Display Output • Power Management System Module • AC Output • USB Output • Power Inverter • Charging System Module • Battery Management System (BMS) Module
PCB
337 electronic Components in 8 functional moduler design:
• PID (Proportional Integral Derivative) Controller Mechanism • Maximum Power Point Search Technology • Safety Check Algorithm • Conversion Algorithm
Smart Power Management System
Includes the following unique technologies:
HARDWARE & FIRMWARE INTRODUCTION The Omnicharge power bank is the result of extensive research and development in power
conversion technology. Developed to deliver unmatched efficient and reliable charging experience, the Omnicharge 13600mAh and Omnicharge 20400mAh combine the best available components
with design expertise.
• Using Maximum Power Point Search Technology, omnicharge adjusts the input and output voltage to charge and discharge at the fastest time.
• The break through design of omnicharge inverter module increases the USB output efficiency to 90%.
• When on stand-by, Omnicharge completely disconnects the battery from the circuit to preserve power.
• Omnicharge has independent charging and discharging circuit modules, allowing you to power your smart devices while simultaneously charging the power bank.
Adaptive ChargingEfficient Charging Flow Through Charging
Key Features
Con
vers
ion
Rate
(%)
7679.5
8386.5
90
Power Output (A)1 1.499 1.999 2.499 2.999 3.499 3.999 4.5
• Omnicharge uses premium chips and MOSFET from first class electronics suppliers, such as ST Microelectronics, Texas Instruments, Infineon Technologies and Fairchild Semiconductor Company. These fundamental components of Omnicharge’s circuit board enhance PCB’s performance.
• Model Information: ARM32, Cortex-M3 CPU, 72 MHz, Equipped with 256 KB Flash card and temperature sensor
Omnicharge is equipped with advanced PID charging algorithm and built-in safety software to manage the charging and discharging processes with efficiency and reliability:
• Power management system features MPPS technology that can precisely adjust the power input level to the maximum capacity based on the type of power supply.
Maximum Power Point Search Technology
• This built-in technology monitors the charging process to execute safety protocols promptly, should problems occur.
Safety Check Algorithm
• CPU processes real time power input and output level information and delivers the information to display on OLED screen
Power Conversion Algorithm
Components
CPU Power Module
Hardware Protection Module
Display Output
CPU
AC Output
OMNICHARGE’S POWER MANAGEMENT SYSTEM(PCBA’s Top Architecture)
USB Output
• Omnicharge custom inverter module is a custom designed (and patented) Omnicharge transformer, which regulates conversions of AC/DC output with higher efficiency
• Multiple temperature sensors are placed in Omnicharge circuit to monitor the temperature performance of the PCBA and battery components to ensure safety and reliability
Components
Power conversion system is designed to compartmentalise high voltage AC/DC area and low voltage area to ensure safety and reliability.
• Power Inverter Module employs a synchronous rectification method to maintain stable and efficient AC/DC output
• Charging System module features a closed loop system to actively monitor the incoming and outgoing voltage level.
Features:
OMNICHARGE’S POWER CONVERSION SYSTEM(PCBA’s Bottom Architecture)
AC Output
Power Inverter ModuleCharging System Module
USB Output
Battery Management System (BMS) Module
Tech Specifications Safety Features
Rated Capacity (Minimum) 3200mAh 0.65A discharge at 20°C
Nominal Capacity (Minimum) 3250mAh 0.65A discharge at 25°C
Nominal Capacity (Typical) 3350mAh Reference only
Nominal Voltage 3.6V 0.65A discharge
Discharging End Voltage 2.5V
Charging Current (Std.) 1.62A
Charging Voltage 4.20 ± 0.03V
Charging Time (Std.) 4.0 hours
Continuous Discharging Current 4.87A 0 ~ +40°C
Internal Resistance less than 100mΩ AC Impedance 1 kHz
Weight less than 48.5g
Operating Temperature
0 ~ +40°C
-20 ~ +60°C
• Model Information: Panasonic Lithium Ion Battery NCR18650B-H00HA
• One of the safest battery cells in market
• Equipped with temperature sensor to ensure safety and reliability
BATTERY CELL
One of the safest battery cells in market
Equipped with temperature sensor to ensure safety and reliability
oC
Charge
Discharge
Panasonic Lithium Ion Battery NCR18650B-H00HA
infomodel
Temperature Protection Automatic system protection in case of abnormally high or low temperature.
Short Circuit Protection Built-in fuse design that protects the device from
short circuiting.
Overcharge Protection Automatic power-off when running current in the
battery exceeds its safety limit.
Reset Program Algorithm Automatic restart when CPU detects abnormal
system parameters.
Self-Balancing Algorithm Charging program that constantly monitors and adjusts individual battery cell’s performance and capacity level, maximises battery cell’s efficiency.
Overcharge Protection Prevents overcharging of batteries by
automatically disconnecting from power source
OMNICHARGE POWER SAFETY PROTECTION SYSTEM
AC/USB Outlet Protection Automatic disconnection of any plugged in device
when output level does not match with user’s device requirements
Power Overflow Protection Safety algorithm constantly monitors for any
irregular activities, and actively adjusts the output current to normal parameters
Voltage Underflow/ Overflow Protection Automatic disconnection in case of voltage
overflow to plugged-in device. Automatic power off in case of voltage underflow to protect device when
battery is depleted
Charging Overflow Protection Automatic charging circuit protection when there
is an irregular amount of current flowing into Omnicharge from any power source
Charging Circuit Protection Automatic disconnection when any power source
does not meet Omnicharge safety parameters
Input ProtectionOutput ProtectionDevice Protection