OMEGA ® Scanner Overview. Introduction The OMEGA® Tracer® System allows practitioners to create prosthetic and orthotic devices electronically instead.

OMEGA® Scanner Overview

Introduction

• The OMEGA® Tracer® System allows practitioners to create prosthetic and orthotic devices electronically instead of with plaster

• The system features the OMEGA Scanner– Hand-held laser scanner– Non-contact– Completely portable

• The contours of the shape being captured are determined by a pulsed crosshair laser that is emitted from the Scanner.

• Simultaneously, LEDs illuminate reflective targets on the surface of the shape so that digital cameras in the Scanner can record the position of the targets in space.

• Capable of scanning directly over skin, sock, liner, plaster, or foam

• Able to scan complex and intricateor detailed shapes and surfaces

• Can pause and resume scanning during the scanning session

• Can merge two scans to create a shape

OMEGA Scanner Applications

Prosthetic• Below

Knee• Above

Knee• Below

Elbow• Above

Elbow• Breast

Orthotic• Insole• AFO• Cranial• Knee• Spinal

Alpha DESIGN® Liners

• Upper and lower extremity shapes captured with the Scanner can be used as the basis for creating custom Alpha Liners

• Ideal for providing comfort and protection for patients who are not suited for off-the-shelf components

Below Knee Example

Above Knee Example

Below Elbow Applications

• Accommodates various levels of amputation for Below Elbow as well as Wrist Disarticulation patients

• Skin-fit suction sockets• DESIGN liners

Above Elbow Applications

• Accommodates various levels of amputation for the Above Elbow, as well as Elbow and Shoulder Disarticulations

• DESIGN liners

Custom Breast Prostheses

• Scans of the intact breast and surgical site are taken and merged into a single shape in the software

• Order form is completed within Tracer and is sent to a WillowWood fabrication partner with the shape file for fabrication

Insoles

• Direct scan of foot

• Scan of foam impression

AFOs

• Scan the outer surface of a negative model

• Scan the inner surface of 2 halves of a negative model

• Scan the limb with the footin a foam impression box

Cranial Remolding Helmets

• After the shape is captured with the OMEGA Scanner and modified as desired, the file is sent to an FDA-approved partner for fabrication

Knee Braces

• Knee shapes can be captured using the OMEGA Scanner and sent to the desired manufacturer for brace fabrication

Spinals

• Scan the patient directly or scan a cast of the patient

Using the Scanner

• Hand-held, non-contact, portable• Captures intricate detail• Wide range of orthotic and prosthetic

applications

OMEGA® Scanner Overview