OKUMA LIVE & STATIC TOOLING LB EX AND GENOS SERIES LATHES OKUMA GENOS SERIES GENOS L-200M, GENOS L-300M CAPTAIN L370-M, L370-MW, L470-M OKUMA LB EX SERIES LB2000EX, LB2500EX, LB3000EX, LU3000EX, LB4000EX, GENOS L300-MW CAT2015-OK-LBEX-CAP FEBRUARY 2019 TH 1979 ~ 2019 1979 ~ 2019
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
OKUMA LIVE & STATIC TOOLING
LB EX AND GENOS SERIES LATHES
OKUMA GENOS SERIESGENOS L-200M, GENOS L-300M
CAPTAIN L370-M, L370-MW, L470-M
OKUMA LB EX SERIESLB2000EX, LB2500EX, LB3000EX,
LU3000EX, LB4000EX, GENOS L300-MW
CAT2015-OK-LBEX-CAP FEBRUARY 2019
TH
1979~20191979~2019
847-367-4800www.lyndexnikken.com
2
Special Live Tool Inquiry Form Fax: (847) 367-4815 Email: [email protected]
Fill in the form below and fax it to (847) 367-4815, or visit www.lyndexnikken.com and complete the form online. Lyndex-Nikken engineers will help you to determine the best live tool for your application.
Please specify design configuration:
Please specify holding system and cutting tool specifications:
Standard: 1) straight 2) 90º (reducer/speeder)
Offset Multi Output: 1) straight 2) 90°
Offset: 1) straight 2) 90°
Adjustable Y straight
Saw Blade Holder: 1) straight 2) 90°
Adjustable Angle
Multi Output: 1) straight 2) 90°
Fixed Angle
Company Name
AddressZip CityPhone E-mail
Holding System
Preferred type of holding system (ER, Shrink Fit, Shell Mill Arbor, etc.):
Application and Cutting Tool Specifications
Type of material:
Type and nature of application (milling, drilling, reaming, splitting, etc.):
Size of cutter (diameter): Overall length of cutter:
Number of nozzle ports: Coolant pipe design or configuration specifications:
Turn Your Okuma Lathe into a Precision Profit CenterAs a member of Partners in THINC, we work hand in hand with Okuma engineers at the Partners in THINC facility in Charlotte, NC. Not only are our live tools custom-engineered specifically for Okuma lathes, but also they are optimal application solutions based on collaborative engineering.
Lyndex-Nikken live tooling offers the latest technology you can expect for turning operations. Designed and manufactured directly with Okuma engineers in Japan, our live tools have features and benefits unmatched by the competition. Gears, bearings, seals, every part is built to provide the highest accuracy, rigidity and stability.
With more than 35 years of tooling engineering and manufacturing experience, Lyndex-Nikken live tooling will maximize the capabilities of your machine, and keep you far ahead of the global competition. We understand that exceptional quality is key to your business. Let the manufacturers who share your philosophy in producing live tools join you in doing what you do best - machining the highest quality parts.
Enhanced with Lyndex-Nikken live tooling, your Okuma machine will allow you to reduce cycle times, eliminate extra operations and achieve maximum efficiency.
Lyndex-Nikken is an official Okuma Live Tool supplier and a member of Partners in THINC.
847-367-4800www.lyndexnikken.com
3
Table of Contents
OKUMA L IVE & STATIC TOOLING
SpecialsCustom-made live tools can be engineered for your specific application. Please direct your request to our office (see special live tool inquiry form). Our engineering staff is ready to assist you with your specific tooling needs.
Special Live Tool Inquiry Form 2
Table of Contents 3
Live & Static Tooling for okuma Lathes 4
Features and Technology 5
Live Tools for Okuma LB2000/2500/3000EX, LU3000EX, Genos L300-MW Series 6-7
Static Tools for Okuma LB2000/2500/3000EX, LU3000EX, Genos L300-MW Series 8-18
Live Tools for Okuma LB4000EX Series 19
Static Tools for Okuma LB4000EX Series 20-24
Live Tools for Okuma Genos L200-M 25-26
Live Tools for Okuma Captain Series L370-M and Genos L300-M 27-29
Live Tools for Okuma Captain Series L370-M 30-31
Live Tools for Okuma Captain Series L470-M 32-34
Lyndex-Nikken VDI30 Static Tool Holders 35-36
Lyndex-Nikken VDI40 Static Tool Holders 37-38
ER Series Collets and Tap Collets 39-42
Wrench Usage, Warranty and Service 43
Torque Wrench 44
847-367-4800www.lyndexnikken.com
4
Part numbering structure for Live Tools
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
OK EX • E R 2 5 X • MS • C
Machine Make Machine Model•
Tool Nose/Output Axis•
Style•
Coolant
OK EX ER25 X MS C
OK OKUMA
EX LB2000-3000EX ER20 ER20 X MS Main Sub Opposite
EX GENOS L300-MW ER25 ER25 X MSD Main & Sub Spindle, 4 Output
E4 LB4000EX ER32 ER32 X, Z MST Main & Sub Spindle, 6 Output
L2 GENOS L200-M ER40 ER40 Z MSQ Main & Sub Spindle, 8 Output
Commonly Referenced: Radial Live Tools Straight Live Tools X-Axis Live Tools
Commonly Referenced: Axial Live Tools 90 or Angle Live Tools Z-Axis Live Tools
Commonly Referenced: Axial Live Tools Straight Live Tools Z-Axis Live Tools
Commonly Referenced: Radial Live Tools 90 or Angle Live Tools X-Axis Live Tools
Okuma Bolt Mount Turret (BMT)Parts inventory, maintenance and repair, and rebuild services are available through Lyndex-Nikken
Okuma Face Mount Turret (VDI)Parts inventory, maintenance and repair, and rebuild services are available through Lyndex-Nikken
• LB2000EX• LB2500EX• LB3000EX
• GENOS L-200M• GENOS L-300M
• LU3000EX• LB4000EX• GENOS L300-MW
• L370-M• L370-MW• L470-M
847-367-4800www.lyndexnikken.com
5
Live Tooling & Static for Okuma Lathes
Features and TechnologyAs an authorized OEM supplier to Okuma, Lyndex-Nikken live tools are designed and manufactured in conjunction with Okuma engineers at the factory in Japan.
Protective Seals Gears for Stability
Eccentric Bearing Nut Tool Design and Engineering
• Labyrinth Seals - provide a high-pressure multi-barrier construction that prevents contaminants and coolant from entering the main chamber.
• Gear Pairing - hand-matched for each pair to minimize backlash.
• Gear Design - custom ground spiral bevel gear tooth design maximizes drive torque output and reduces tooth root stress allowing for more tool longevity.
• Gear Equilibrium - placement of bearings balance torque stress evenly through input/output shafts.
• Tool Body - manufactured from the highest tensile and compression Nickel Chrome Molybdenum alloys.
• Drive Shafts - all features are ground on both the input and output Chrome Molybdenum drive shafts to assure proper torque transmission and precision concentricity.
• Bearing Quality - only the highest precision ABEC 7 angular contact bearings are used for smooth and high speed rotation.
• Quality Control - all live tools go through a vigorous 60-point final inspection to satisfy the highest expectations of live tool performance.
• Ground Eccentric Nut - allows for fine accuracy and strong tool shank gripping capacity by preventing collet twisting or rocking. • Runout - guarantee of under 5-micron repeatability at collet nose.
847-367-4800www.lyndexnikken.com
6
Clockwise Output
Clockwise Input
Clockwise Input
Clockwise Output
LB
2000
/250
0/30
00EX
LU
3000
EX/G
ENOS
L30
0-M
WOkuma LB2000EX, LB2500EX, LB3000EX, LU3000EX and Genos L300-MW Series - Live Tools
Don’t forget to cover open turrets with this part: OKEX-PLUG
External or Internal Coolant
Radial/Axial
Max.RPM
Gear RatioMax. Torque
OutputCollet Size Replacement Nut Coolant Nozzle Wrench for Nut
Wrench for Spindle
External1000 PSI Max Pressure
Radial 6000 1:129.3 ft-lbs (40N-m)
ER32(0.078-0.787”)
NA32 HI103-37110 FK-8 FK-9
External or Internal Coolant
Radial/Axial
Max.RPM
Gear RatioMax. Torque
OutputCollet Size Replacement Nut Coolant Nozzle Wrench for Nut
Wrench for Spindle
Internal1000 PSI Max Pressure
Radial 6500 1:159.0 ft-lbs (80N-m)
ER32(0.078-0.787”)
NUT-ER32I-C N/A WRENCH-ER32I WRENCH-MIM-107642
2.55965
582.
283
100.
394
602.
362
130.512
491.929
1.02426
1.96
950
48.501.909
48.501.90913
0.51
2
1.96
950
Part #: OKEX-ER32X-ICEOD Drill/Milling Unit
Must use a minimum of a 20 micron coolant filter to prevent damage to the unit. Please refer to pages 39-42 for ER Series Collets and ER Tap Collets details.
Please refer to pages 39-42 for ER Series Collets and ER Tap Collets details.
0.39
4
2.63836
51
1.417
60
671.024
2.36
2
26
10 2.00
8
281.102
501.
969
1.96
950
48.501.9091.909
48.50 130.
512
Unit: mm [inch]
LN Part # (old): OKA00-19000Okuma Reference #: T129-530-002-75-2
LN Part # (old): OKEX-ER32X-C-7MP-MIM
Part #: OKEX-ER32XOD Drill/Milling Unit
Unit: mm [inch]
847-367-4800www.lyndexnikken.com
7
LB20
00/2
500/
3000
EX
LU30
00EX
/GEN
OS L
300-
MW
Okuma LB2000EX, LB2500EX, LB3000EX, LU3000EX and Genos L300-MW Series - Live Tools
Don’t forget to cover open turrets with this part: OKEX-PLUG
Clockwise Output
Clockwise Output
Clockwise Output
Clockwise Input
Clockwise Input
Clockwise Input
106
[4.1
73]
50[1.969][1.969]
50
51[2.008]
0.39
410
37
[2.3
62]
60
4270
[2.756][0.787]
20[1.654]
[1.457]
52[2
.047
]
LN Part # (old): OKA00-20000Okuma Reference #: T129-530-003-08-1Part #: OKEX-ER32Z
Face Drill/Milling Unit
Please refer to pages 39-42 for ER Series Collets and ER Tap Collets details.
Unit: mm [inch]
On the main spindle, the clutch shaft and the collet shaft rotate in the same direction; on the sub spindle, they rotate in opposite directions. Please refer to pages 39-42 for ER Series Collets and ER Tap Collets details.
Must use a minimum of a 20 micron coolant filter to prevent damage to the unit.
External or Internal Coolant
Radial/Axial
Max.RPM Gear Ratio Max. Torque
Output Collet Size Replacement Nut Coolant Nozzle Wrench for Nut Wrench for Spindle
External1000 PSI Max Pressure Double 6000 1:1
29.3 ft-lbs (40N-m)
ER32 (1/8” to 25/32”)
NA32 HI103-37110 FK-8 FK-9
External or Internal Coolant
Radial/Axial
Max.RPM Gear Ratio Max. Torque
Output Collet Size Replacement Nut Coolant Nozzle Wrench for Nut Wrench for Spindle
Part #: OKE4-BG15Z-MD-CBoring Bar Holder (1.5”) 2 Output
Description Interface Output Size Maximum Internal Pressure
Boring Bar Holder (2”) Bolt 2.0” (50.80mm) 1000 PSI
903.543
1.693
104
4.09
4 50.802.000
43
863.
386
5
1.96
913
500.
512
0.197
80.
315
2.04
752
712.795
552.165
2.04
752
1184.646
Unit: mm [inch]
Part #: OKE4-BG20Z-CBoring Bar Holder (2”)
INTERNAL COOLANT
847-367-4800www.lyndexnikken.com
22
Okuma LB4000EX Series - Static ToolsO
kum
a LB
4000
EX
Don’t forget to cover open turrets with this part: OKE4-PLUG
Description Interface Output Size Maximum External Pressure
OD Cutting Holder (1”) Bolt 1” (25.40mm) 1000 PSI
OD Cutting Holder (1.25”) Bolt 1.25” (31.75mm) 1000 PSI
OD Cutting Holder (25mm) Bolt 0.984” (25.00mm) 1000 PSI
48
34[1.339]
[0.197]
[1.890]
5
84[3
.307
][1
.250
]
[5.748]146
57[2
.244
]
[2.2
44]
57[1.250]31.75
31.7
5
91[3.583]
25.4
0[1
.000
]
84[3.307]
[5.354]136
[1.9
69]
50
[.984]25.00
[2.9
13]
74
25.
00[.9
84]
[.984
] 2
5.00
31.7
5[1
.250
]
87[3.425]
[5.354]
[1.9
69]
50
136
[1.ooo]25.4
[2.9
13]
74
[1.0
00]
25.4
0
Unit: mm [inch]
LN Part # (old): OK126-64000Part #: OKE4-OD10X OKE4-OD12X OKE4-OD25MX
OD Cutting Holder (1”, 1.25”,and 25mm)
Description Interface Output Size Maximum External Pressure
OD Cutting Holder (1”) 2 Output Bolt1” (25.04mm) x2
0.984” (25.00mm) x2 1000 PSI
0.86
622
0.82
7
0.39
4
702.756
66
1.33
9
10
21
2.598
3450.
197
2.95375
108
4.25
2
120.
472
261.
024
55
2.12
654
120.
472
1.02
4
2.16581
3.189
26
250.984
Unit: mm [inch]
Part #: OKE4-OD10X-MD
OD Cutting Holder (1” and 25mm) 2 Output
847-367-4800www.lyndexnikken.com
23
Okuma LB4000EX Series - Static Tools
Oku
ma
LB40
00E
X
Don’t forget to cover open turrets with this part: OKE4-PLUG
Description Interface Output Size Maximum External Pressure
ID Cutting Holder (1”) Bolt 1” (25.40mm) 1000 PSI
ID Cutting Holder (25mm) Bolt 0.984” (25.00mm) 1000 PSI1.
969
100
50
3.18981 55
3.93
7
2.165
25.4
01.
000
[.984
]25
.00
[.984
]25
.00
[.984]25.00
1.000
1.00
025
.40
25.40
361.417
722.835
2.520
36
64
1.41
7
50.
197
341.
339
Unit: mm [inch]
LN Part # (old): OK126-65000Part #: OKE4-ID10Z OKE4-ID25MZ
ID Cutting Holder (1” and 25mm)
Description Interface Output Size Maximum External Pressure
ID Cutting Holder (1.25”) Bolt 1.25” (31.75mm) 1000 PSI
572.
244
1.25
031
.75
3.18981
2.16555
572.
244
0.19
7
3.22882
5
542.126
341.
339
31.7
51.
250
1.25031.75
752.953
Unit: mm [inch]
Part #: OKE4-ID12Z
ID Cutting Holder (1.25”)
847-367-4800www.lyndexnikken.com
24
Okuma LB4000EX Series - Static ToolsO
kum
a LB
4000
EX
Don’t forget to cover open turrets with this part: OKE4-PLUG
Description Interface Blade Output Size
Cut Off Holder (32mm) Bolt 1.26” (32mm)
7
0.551
80
14
3.150
0.276
1.02426
16.4
00.
646
15°
1.96
9
5.449138.40
3.93
710
0
50
783.071
321.
260
100
3.93
7
Unit: mm [inch]
Part #: OKE4-CO32XCut Off Holder (32mm)
847-367-4800www.lyndexnikken.com Title
25
Oku
ma
GE
NO
S L2
00-M
Okuma GENOS L200-M - Live Tools847-367-4800www.lyndexnikken.com
This tool requires a minimum 20 micron filter and cannot be run dry.Please refer to pages 39-42 for ER Series Collets and ER Tap Collets details.
External or Internal Coolant
Radial/Axial
Max.RPM
Gear RatioMax. TorqueOutput (N.m)
Collet SizeReplacement
NutClutch Kit Setting Fixture Coolant Nozzle
Spanner Wrench for Nut
Internal1000 PSI Max. Pressure
Axial 6000 1:1 14.01ER20
(0.039-0.511”)
NA20 OK116-20100 OK116-00100 PM2B-1 FK-5
Clockwise Output
Clockwise Input
LN Part # (old): OK112-30000Part #: OKL2-ER20Z-CER20 Face/Drill Milling Unit
Unit: mm [inch]
Please refer to pages 39-42 for ER Series Collets and ER Tap Collets details.
External or Internal Coolant
Radial/Axial
Max.RPM
Gear RatioMax. TorqueOutput (N.m)
Collet SizeReplacement
NutClutch Kit Setting Fixture Coolant Nozzle
Spanner Wrench for Nut
External1000 PSI Max. Pressure
Axial 6000 1:1 14.01ER20
(0.039-0.511”)
NA20 OK116-20100 OK116-00100 OK116-70020 FK-5
Clockwise Input
Clockwise OutputLN Part # (old): OK112-10002Part #: OKL2-ER20ZER20 Face/Drill Milling Unit
Unit: mm [inch]
Don’t forget to cover open turrets with this part: VDI30-PLUG
847-367-4800www.lyndexnikken.com Title
26
847-367-4800www.lyndexnikken.com Okuma GENOS L200-M - Live Tools
Oku
ma
GE
NO
S L2
00-M
Please refer to pages 39-42 for ER Series Collets and ER Tap Collets details.
This tool requires a minimum 20 micron filter and cannot be run dry.Please refer to pages 39-42 for ER Series Collets and ER Tap Collets details.
External or Internal Coolant
Radial/Axial
Max.RPM
Gear RatioMax. TorqueOutput (N.m)
Collet SizeReplacement
NutClutch Kit Setting Fixture Coolant Nozzle
Spanner Wrench for Nut
External1000 PSI Max. Pressure
Radial 4500 1:1 15.3ER20
(0.039-0.511”)
NA20 OK116-20100 OK116-00100 OK116-71070 FK-5
Clockwise Output
Clockwise Input
External or Internal Coolant
Radial/Axial
Max.RPM
Gear RatioMax. TorqueOutput (N.m)
Collet SizeReplacement
NutClutch Kit Setting Fixture Coolant Nozzle
Spanner Wrench for Nut
External1000 PSI Max. Pressure
Radial 5000 1:1 14.01ER20
(0.039-0.511”)
NA20 OK116-20100 OK116-00100 PM2B-1 FK-5
Unit: mm [inch]
Unit: mm [inch]
Clockwise Output
Clockwise Input
LN Part # (old): OK112-21000Part #: OKL2-ER20XER20 Drill/Milling Unit
LN Part # (old): OK112-31000Part #: OKL2-ER20X-CER20 Drill/Milling Unit
Don’t forget to cover open turrets with thsi part: VDI30-PLUG
847-367-4800www.lyndexnikken.com Title
27
Oku
ma
Cap
tain
L37
0-M
an
d G
EN
OS
L300
-M
Okuma Captain L370-M and GENOS L300-M - Live Tools847-367-4800www.lyndexnikken.com
Please refer to pages 39-42 for ER Series Collets and ER Tap Collets details.
Must use a minimum of a 20 micron coolant filter to prevent damage to the unit. Please refer to pages 39-42 for ER Series Collets and ER Tap Collets details.
LN Part # (old): OK101-14000Part #: OKL3-ER32XOD Drill/Milling Unit
LN Part # (old): OK101-67000Part #: OKL3-ER32X-ICE
OD Drill/Milling Unit
Don’t forget to cover open turrets with this part: VDI40-PLUG
NEW DESIGN ALLOWS FOR INTERNAL COOLANT TYPE TO BE RUN DRY CONTINUOUSLY!
847-367-4800www.lyndexnikken.com Title
28
847-367-4800www.lyndexnikken.com Okuma Captain L370-M and GENOS L300-M - Live Tools
Oku
ma
Cap
tain
L37
0-M
an
d G
EN
OS
L300
-M
401.
575
40
R2.32359
1.57540
1.575
5.200.205
1.102
3.32784.5
0.94524
1.14
22940
1.57
5
421.654
2.00
851
28
692.717
Please refer to pages 39-42 for ER Series Collets and ER Tap Collets details.
Must use a minimum of a 20 micron coolant filter to prevent damage to the unit. Please refer to pages 39-42 for ER Series Collets and ER Tap Collets details.
847-367-4800www.lyndexnikken.com Okuma Captain L370-MW - Live Tools O
kum
a C
apta
in L
370-
MW
1.10228
1.57
5
240.945
401.
142
294.961126
2.00
8
190.748
69
51
2.717 602.362
451.
772
1.39
835
.50
401.575
115.
504.
547
451.772
Unit: mm [inch]
Please refer to pages 39-42 for ER Series Collets and ER Tap Collets details.
Clockwise Output
Clockwise Input
External or Internal Coolant
Radial/Axial
Max.RPM
Gear RatioMax. Torque
OutputCollet Size
ReplacementNut
Clutch Kit Setting Fixture Coolant NozzleSpanner
Wrench for Nut
External1000 PSI Max. Pressure
Offset(M)
4500 1:117.3 ft-lbs(24 N.m)
ER32(0.078-0.787”)
NA32 OK116-20200 OK116-00500 OK116-70060 FK-8
LN Part # (old): OK109-13001Part #: OKL3-ER32Z-OFMFace Drill/Milling Unit- Main
Please refer to pages 39-42 for ER Series Collets and ER Tap Collets details.
Counter Clockwise Output
Clockwise Input
196
7.71
7
853.346
1.102
2.835
29
2.717
1064.173
690.945
24
1.14
2
51
28
2.00
8
401.
575 1.
772
45
72190.748
115.
724.
556
External or Internal Coolant
Radial/Axial
Max.RPM
Gear RatioMax. Torque
OutputCollet Size
ReplacementNut
Clutch Kit Setting Fixture Coolant NozzleSpanner
Wrench for Nut
External1000 PSI Max. Pressure
Axial 4500 1:117.3 ft-lbs(24 N.m)
ER32(0.078-0.787”)
NA32 OK116-20200 OK116-01900 OK116-70060 FK-8
LN Part # (old): OK101-14001Part #: OKL3-ER32Z-OFSFace Drill/Milling Unit- Sub
Unit: mm [inch]
Don’t forget to cover open turrets with thsi part: VDI40-PLUG
31
847-367-4800www.lyndexnikken.com Okuma Captain L370-MW - Live Tools
Oku
ma
Cap
tain
L37
0-M
W
451.772
512.008
702.756
40
2.717
2.48
063
2.75
670
69
291.
142
49.501.949
1.57
5
240.945
692.717
28
722.835
1.57
540
28
0.945
2.00
8
1.14
2
24
1.102
29
51
1.102
6.575
0.74819
167
512.
008
454.
547
115.
501.
398
35.5
0
1.77245
1.77
2
401.575
Unit: mm [inch]
Unit: mm [inch]
Please refer to pages 39-42 for ER Series Collets and ER Tap Collets details.
On the main spindle, the clutch shaft and the collet shaft rotate in the same direction; on the sub spindle, they rotate in opposite directions.Please refer to pages 39-42 for ER Series Collets and ER Tap Collets details.
847-367-4800www.lyndexnikken.com ER Series Tap Collets
ER Tap Collets feature a unique design that incorporates an internal square drive with our popular ER Series collets. The square drive matches the tap square, providing a tight fit for all rigid tapping applications.
847-367-4800www.lyndexnikken.com ER Series Tap Coolant Collets
Lyndex-Nikken has now combined the versatility of our ER tapping collets with the popularity of our coolant collets to create our patented ER Coolant Tap Collets.
Note: Seals up to maximum coolant pressure of 1000 PSI.
4343
847-367-4800www.lyndexnikken.com Wrench Instructions, Warranty and Repair Services
Lyndex-Nikken is dedicated to providing not only the highest quality of equipment, but also the highest quality of service and customer care. With over 60 years of experience, our service engineers are looking forward to supporting your needs beyond your expectations.
We fully stock all internal components to provide an expedited and cost-effective maintenance program and rebuild package for your live tooling. Managing a maintenance schedule for all your machine tool accessory components can be challenging, so we’ll be glad to remind you when the time comes.
Warranty:
1 year warranty for internal components
2 year manufacturer warranty on external body
For any service request or inquiry, please contact our service department: (847) 367-4800
Insert setting fixture behind collet nut.
After securing the setting fixture in position, apply spanner wrench onto collet nut.
While holding the setting wrench, turn the spanner wrench clock-wise to tighten.
The TQW Torque Wrench is very accurate and easy-to-use, guaranteeing maximum accuracy and preventing tool overtightening or breakage.
• Variable torque adjustable wrench • Robust and durable • Ergonomic grip • Easy to read inch and metric scale • Strong steel shaft is highly corrosion resistant • Easy to set up and operation: A. Set wrench to desired torque setting B. Insert attachment C. Torque down on collet nut until it clicks in place
A wide selection of attachments are available: ER, SK, TG, Pull Stud, Milling Chuck, CAPTO
A Lock & Unlock collar securely locks the preset torque and prevents inadvertent adjustment.
Handle is shaped to provide a firm and ergonomic grip.
Design and Construction
45
847-367-4800www.lyndexnikken.com
Lyndex-Nikken offers Live Tooling for all Okuma Lathes!