ok PRODUCT - Advitek · H3000 Analogue / Triton Nav Light and GPS / 10 / 10 20 / 20 7” Display ... Mou N t j N c RA i L d t RA L N t R ok-L D eck Po D X X X X X Fits under PowerTower

Page 1

Instrument

Instrument

Instrument

Maxi Instrum

ent

H3000 G

DP / G

FD

H3000 Analogue / Triton

10 / 10 20 / 20

7” Display

8” Display

10.4” Display

10.4” Display

12” Display

15” Display

9” Display

12” Display

Instrument

Maxi Instrum

ent

1724C / 1734C / GD

-1720C M

FD8

1824C/-BB / 1934C / 1944C G

D-1920c

MFD

12 M

U-155C

TZ Touch - TZT9 TZ Touch - TZT12 FI-50 STD

Instruments

FI-50 Multi XL

All 700 series 4008 / 5008 / 6008 4010 4012 / 5012 / 6012 / 7012 5015 / 7015 G

armin G

PS MA

P 400-500 / Echo 100-550 G

MI 10

8” Display

Instrument

7” Display

8” Display

10” Display

12” Display

15” Display

Display

Instrument

998cx SI 300-700

5” Display

6.4” Display

8.4” Display

10.4” Display

12” Display

HD

S-5 / HD

S-5m / H

DS-5x

HD

S-7 / HD

S-7m

HD

S-8 / HD

S-8m

HD

S-10 / HD

S-10m

HD

S-12

Instrument

Maxi Instrum

entN

X, NX2 D

igital, NX2 Analogue inst

NX2 M

ulti XL / NXR M

ulti

12” Display

7” Display

9” Displays

12” Displays

15” Display

Instrument

Maxi Instrum

ent 6” D

isplay M

axi Instrument

Instrument

G Series - G

120 / G150

e7 & e7D

c95 / c97 / e95 / e97 c125 / c127 / e125 / e127 e165 i50 / i60 / i70 / p70 / p70R ST70+ A65 / A67 M

axi Display T200 Series

T100 Series

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X X X X X

RL-502-ADM

X

X X X X X

RL-502-ARM

X

X X X X X

RL-502-RM

X

X

RL-501-ADM

X RL-501-ARM

X

RL-501-RM

RL-503-ADM

RL-505-ADM

X

X

X

RL-503-ARM

RL-505-ARM

X

X

X

RL-503-RM

RL-505-RM

X

X

X

X

X

X

X

X

X

X

RL-504-ADM

X

X

X

X

X

X

X

X

X

RL-504-ARM

X

X

X

X

X

X

X

X

X

RL-504-RM

X

X

X

X

X

X

X

X

B&G

Furuno

Garm

in

Hum

min-

bird

Lowrance

Nexus

Raymarine

sizeD

isPLAYBRA

ND

ADj

Deck

Mo

uN

t

ADj

RAiL M

ou

Nt

RAiL

Mo

uN

t

Rok-Lo

kD

eck PoD

X

X

X

X

X

X

X

X

SPD-8D

-W

SPD-8D

-W

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

SPD-8D

-W

X

X

X

X

X

SPD-7-W

X

X

X

X

X

X

SPD-8D

-W

X

X

X

X X SPD

-8D-W

X X

SPD-7-W

SPD

-7-W

X

X

X

X

X

X

X

X

SPD-7-W

X

X

X

X

X SPD

-7-W

X

X

SPD-15D-W

X X X SPD-15D-W

X X X X X

X

X

X

X

X

SPM-3i-W

X

X

X SPM

-3i-W

X

X

X

X

X

X

SPM-2M

AXI-W

X

SPM-2M

AXI-W

X

X

X

X

X

X

X

SPM-M

AXI

X SPM

-MAXI-W

X

X

X

X

X

X

SPM-4i-W

X

X

X SPM

-4i-W

X X SPD

-8-W

X X X X SPD

-8D-W

X X

X

X

X

XX X X X X

SPD-15D-W

X SPD-15D-W

X XX X X X

SPD-15D-W

X X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

SPD-12D

-W

SPD-12D

-W

SPD-12D

-W

X

SPD-12D

-W

X

X

XX X

SPD-12D

-W

SPD-12D

-W

X X X

X

X

X

X

X

SPD-12D

-W

SPD-12D

-W

X

X

X

X

X

SPD-12-W

X

X

X

X

X

X

8” D

isPLAY7”

DisPLAY

15” D

isPLAY12”

DisPLAY

SPM-3i-W

SPM

-3i-W

SPM-3i-W

X

SPM-2M

AXI-W

X X SPM

-2MAXI-W

X

X

X

X

X

X

X

X

SPM-3i-W

X

X X X X X X X X X SPM

-2MAXI-W

X

X

X

X

X

X

SPM-3i-W

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

SPM-3i-W

X

X SPM

-2MAXI-W

SPM-4i-W

SPM

-4i-W

SPM-4i-W

X

SPM-M

AXI X X

SPM-M

AXI

X

X

X

X

X

X

X

X

SPM-4i-W

X

X

X

X

X

X

X

X

X

X

SPM-M

AXI

X

X

X

X

X

X

SPM-4i-W

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

SPM-4i-W

X

X SPM

-MAXI

3 x iN

stRu-

MeN

ts

2 x M

Axi4 x

iNstRu

- M

eNts

3 x MAxi

(-W W

HITE /

-C CARBoN

)

MA

st PoD

Instrument

8” Display

12” Display

7” Display

8” Display

12” Display

Instrument

Instrument

IS70 / IS80 N

SE-8 N

SE-12 N

SS-7 N

SS-8 N

SS-12 AP24 AP28

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

simrad

X SPD

-8D-W

X X

SPD

-8-W

X X X

X

X

X

SPD-7-W

X

X

X

X

X X SPD

-12D-W

X X

SPD-12-W

X X

X

X

X

X

X

X

X

X

SPM-4i-W

X

X

X

X

X SPM

-4i-W

SPM-4i-W

SPM-3i-W

X

X

X

X

X SPM

-3i-W

SPM-3i-W

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

Fit Mu

LtiPLe iNstRu

MeN

ts AN

D D

isPLAYs iN o

Ne scA

NPo

DsPH

-sYsteM-W

H

elm Pod - Fits 2 x std instrum

ents + 12” Display / 4 x std instrum

ents + 8” Display

sPH-4xi-W

H

elm Pod - Fits 4 x std instrum

ents / 2 x std instruments + 7” D

isplaysPD

-4xi-W

Deck Pod - Fits 4 x std instrum

ents / 2 x std instruments + 7” D

isplay

scAN

PoD

suN

cov

eRsc-sP-8

For all 8” Podsc-sP-12

For all 12” Podsc-sP-15

For all 15” Podsc-sP-sYsteM

For all system

Podsc-sP-M

Axi-2

For all Maxi 2 instrum

ent Podsc-sP-M

Axi-3

For all Maxi 3 instrum

ent Podsc-sP-3i

For all 3 instrument H

elm &

Mast Pods

c-sP-4i For all 4 instrum

ent Helm

& M

ast Pods

X

X

X

X

X

X

X

X

SPH-8D-W

SPH-8D-W

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

SPH-8D-W

SPH-8D

-W

X

X

X

X

X

SPR-7-AM (RM

) X X X X X X

SPH-8D-W

X

X

X

X

X

X

X

X

X

X

XX X X X X

SPH-15D-W

X SPH-15D-W

X XX X X X

SPH-15D-W

X X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

SPH-12D-W

SPH-12D-W

SPH-12D-W

X

SPH-12D-W

X

X

X

X

X

SPH-12D-W

SPH-12D

-W

X

X

X

X

X

X

X

X

SPH-12D-W

SPH-12D-W

SPR-7-AM (RM

) SPR-7-AM

(RM)

X X X

SPH-8D-W

SPH-8D-W

SPH-8D-W

X

X

X

X

X

SPR-1i-RM

X

X

X

SPR-1i-AM

X

X

SPH-4i-W

SPH

-4i-W

SPH-4i-W

SPH

-4i-W

X

X

X

X

X

X

X

X

SPR-1i-RM

X

X

X

X

X

X

X

X

X

SPR-1i-AM

X

X

X

X

X

X

X

X

X

SPH-4i-W

X

X

X

X

X

X

X

SPR-1i-RM

X

X

X

X

X

X

SPR-1i-AM

X

X

X

X

X

X

SPH-4i-W

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

SPR-1i-RM

X

SPR-1i-AM

X

SPH-4i-W

X

SPH-3i-W

SPH

-3i-W

X

X

X

X

X

X

X

X

X

X

SPH-3i-W

X

X

X

X

X

X

X

SPH-3i-W

X

X

X

X

X

X

X

SPH-3i-W

X

8” PoD

7” PoD

ARM

(RAiL) M

ou

NteD

15” PoD

12” PoD

1 xiNstRu

(RAiL

Mo

uN

t)

1 x iNstRu

(RAiL ARM

-M

ou

Nt)

3 x iN

stRu-

MeN

t

3 x iN

stRu-

MeN

t

HeLM

PoD

DISPLAyS

INSTRU

MEN

TSD

ISPLAySSTD

INSTRU

MEN

TSM

AXI INSTRU

MEN

TS

X SPH-8D

-W

X SPH-8D

-W

SPH-8-W

* X X X

X X X SPR-7-AM

(RM)

X X X X

X

X

X

X

X

X

X

X

X X SPH-12D

-W

X X SPH

-12-W

X X

SPR-1i-RM

X

X

X

X

X

SPR-1i-RM

X

SPR-1i-AM

X

X

X

X

X

SPR-1i-AM

X

SPH-4i-W

X X X X X

SPH-4i-W

SPH

-4i-W

SPH-3i-W

X

X

X

X

X SPH

-3i-W

SPH-3i-W

X SPR-7-AM

(RM)

X X X X X SPR-7-AM

(RM)

X X

SPH-15D-W

X

X

X

SPH-15D-W

X

X

X

X

X

X

X

X

X

X

SPR-1i-RM

X

X

X

X

X

X

X

X

X

SPR-1i-AM

X

X

X

X

X

X

X

X

X

SPH-3i-W

X

X

X SPH

-3i-W

X X X X X SPH

-4i-W

X X X

SPH-4i-W

X

SPH-8D-W

SPH-8-W

*

X

X

X

X SPH-8D

-W

X

X

X

X

X

SPH-12-W

X

X

X

X

X

X

Part N

um

ber G

uid

e D

isplays &

Instru

me

nts

* Please note Compact 8” H

elm Pod fits 6-8”

centre pedestal rails. To fit rails from 7”

upwards please order SPH

-8D-W

.

crop

PRODUCT GUIDE 2013

Marine Electronics Mounts | Scanstrut Accessories | Electrical AccessoriesScan to view Scanstrut Video channel +44 (0) 1803 863800 [email protected] www.scanstrut.com

Nav Light and GPS / VHF Antenna Mount

Install Nav Light, GPS or

VHF antennas above the

radar for maximum visibility

and performance.

Attach using radar mounting

bolts, no extra fastenings

required. (1” x 14 tpi thread)

Order iNFO

SC110 For Nav Lights (Mount

port side of radar)

SC111 For GPS / VHF Antenna

(Mount starboard side of radar)

SC112 For GPS / VHF Antenna

(Mount port side of radar)

SC113 Pre-fitted Hella Marine

NaviLED 360° all round white

light (Mount port side of radar)

Only compatible as part of

a radome installation.

deck Flood Light

High performance, 55W sealed

beam halogen deck light.

Order iNFO

SC117

For use with SC100 Pole Mount

SC117-4

For use with SC2 Pole Mount

GPS / VHF Antenna Mount for Self-Levelling radar Mount

Single mount for installing

an additional GPS / VHF

antenna above the radar.

(1” x 14 tpi thread)

Order iNFO

LM-GPS For all Leveller models

Lifting Crane

Ideal for lifting heavy

outboards, luggage, supplies

etc on board up to 30kg

(66lbs) in weight.

Quick release pins allow easy

removal for storage.

Order iNFO

SC120 For use with SC100

Pole Mount

SC120-4 For use with SC2

Pole Mount

Mast Mount Adapter Kit

For masts with an integral

track at the front which

makes it difficult to fit a

Scanstrut Mast Mount such

as Z-Spars, Selden, Isomat

and Eurospars Masts.

Order iNFO

50100 Mast Mount Adapter Kit

4° Base Wedge

Angles your radar down 4°

below horizontal providing

a level horizon for your radar

when the boat is bow’s up

underway.

Fits under PowerTower with

a base seal to ensure a

watertight install.

Order iNFO

PT3010 For Composite

& Aluminium PowerTower

SPT2010 For Stainless

PowerTower

Gantry Mount for PowerTower®

Combined mounting solution for navigation and search lights, GPS and VHF antenna.

Order iNFO SC118 For Aluminium and Stainless PowerTower

Only compatible as part of a radome installation.

Gantry Mount for dual PowerTower®

Combined mounting solution for all navigation and search lights.

Mounts anchor lights, all round white lights, steaming and aft lights.

Order iNFO SC114-40 For DPT-SR1-30/40; DPT-SR2-30/40; DPT-SO1-30/40; DPT-SO2-30/40

SC114-60 For DPT-SR1-60 / DPT-SR2-60 / DPT-SO1-60 / DPT-SO2-60

Cable Conduit

A neat solution for securing

antenna cables down the

outside of the mast - simply

rivet the back section to the

mast, lay the cables in and

snap the cover on.

Order iNFO

SC33 Up to 14mm

(0.55”) cables

SC66 Up to 18mm

(0.91”) cables

Supplied in 1.5m (5’) lengths

Adjustable Base Wedge

Satcom antennas require a

horizontal mounting surface

to function correctly.

Satcom wedges eradicate this

problem by providing a level

mounting on slopes from

0° to 12°.

Simply counter rotate the

angled discs until the top

surface is horizontal.

Order iNFO

SC50 Compatible with SC35,

SC45, SC45R and SC65

Satcom Mounts only

radar Guard

Polished stainless guards

protect radome from damage

and reduce wear on the sails.

Mounted using radome bolts,

no extra fastenings required.

Order iNFOMast Mount

SC12

SC18

SC20

SC21

M92722

M92698

Compatible Radar Guard

SC25*

SC24

SC27

SC26

SC27

SC28

*Not compatible with Furuno 19” DRS2D

Scanstrut Accessories

Page 2

SATCOM/TVRADOMES

RADOMES

• Can be installed on both adjustable and

split backstays.

• Options to mount radome fore or aft of backstay.

• 2.6m (8’6”) aluminium mounting pole –

supplied in 2 lengths with hidden joiner piece.

• Can be deck, transom or chainplate mounted.

• Range of nylon bushes supplied. Clamps around

backstay so cable tension can be adjusted.

Based on SC100 Pole Mount.

Adapter unit

attaches levelling

mechanism onto

top of pole.

dual Pole MountedCombines SC100 Pole Mount

with Self-Levelling Mast Mount

for dual mounting solution.

Two deck struts support

additional loading.

Self-Levelling radar Mount

SC100 Pole Mount SC2 Pole Mount

Backstay Mounted

Pole Mounted

Radome cradle with fine

tune adjustment for

different mast

rake angles.

We offer a standard range of over 100 different

installation products to mount radar, satcom,

displays, instruments, cameras, GPS, VHF and

nav lights onto yachts, powerboats, commercial

and military vessels.

Electronics and seawater are not the best of

friends and it’s essential that your installation

remains dry inside.

The Scanstrut range of Electrical Accessories

will ensure you complete your marine electronics

install in the best way possible.

A range of Accessories is available for your

Scanstrut installation. From mounting an

additional light or GPS Antenna to accessories

which aid installation and performance.

Mast Mounted

Beautifully styled and expertly engineered to ensure your radar stays level with the horizon at all times for optimum antenna performance.

As the boat heels or rolls, the radar is kept horizontal preventing target loss and giving the best possible radar picture.

• Maintenance free & no power required.

Scanstrut Product Key

• 1.9m (6.4’) recommended for level deck mounting and 2.5m (8.3’) recommended for sloping transoms.

• Accommodates two cable channels with a cover strip to hold cables in place and out of view.

• Two support modules provide maximum fore / aft and sideways support.

• Unscrew base and remove pole for racing or winter storage, leaving just low profile base on deck.

CHOICE OF MATERIAL:

Aluminium Combining great value with outstanding performance on the water.

Carbon Low weight, high strength carbon pole and antenna plate. Saves weight, looks fast!

Stainless steel Highly durable and offers a stylish look to match stanchions and deck fittings.

Versatile pole mount for deck or transom mounting. No customisation or adjustment required, it works straight from the box.

Offering a 100% reliability track record through the toughest sailing conditions, making it the choice for offshore sailors the world over.

TIP: When mounting radome forward of

backstay, check clearance between radome

and mainsail.

Ideal for installations

on decks, cabin roofs, low

arches and other areas

where minimal elevation

is required.

• 1.0m (3.3’) height*.

Ideal for blue water yachting and designed for

yachts from 12m (40’) upwards.

A unique collar system clamps

pole at deck level and also at

its GRP base inside the boat.

• 3.0m (10’) or 4.0m

(13’) heights*.

*An additional Satcom Antenna

Mount will be required to install

40cm and 60cm satcom antenna.

deck Mounted

Through deck Mounted

RADOMES OPEN ARRAy SATCOM/TV

"Picture perfect radar performance."

As tested by

ACCESSORIES AVAILAbLE: GPS/VHF Mount for Leveller

ACCESSORIES AVAILAbLE:

GPS/VHF Mount for Leveller

Mast Mount Adaptor Kit

Cable Conduit

ACCESSORIES AVAILAbLE: GPS/VHF Mount for Leveller

ACCESSORIES AVAILAbLE:

Nav Light Mount

Deck Flood Light

GPS/VHF Antenna Mount

Lifting Crane

Marine electronics Mounts electrical Accessories Scanstrut Accessories

With over 25 years experience, make Scanstrut an essential part of your marine electronics installation.

Fully endorsed and recommended by all leading marine electronics manufacturers, the complete Scanstrut range is stocked worldwide via an international network of expert distributors.

For Radar &

Satcom/tv antenna

For GPS/VHF Antenna

For Instruments

& Displays

For Cameras

& Lights

SATCOM/TV

RADOMES

GPS / VHF ANTENNA

CAMERAS

LIGHTS

INSTRuMENTS

DISPLAyS

ACCESSORIES AVAILAbLE: Deck Flood Light

Lifting Crane

Rail stand-off

Deck strut

Adjustable base

SATCOM/TVRADOMES

Mast Mount

Still the first choice for boat owners the world over, Scanstrut leads the way with a new generation of Mast Mounts.

Stronger. Lighter. easier to fit.

• Attaches to mast with four swivel feet, matching a variety

of mast profiles.

• New mounting foot is stronger, stiffer and easier to fit.

• 12 point fixing using high quality monel rivets.

• Safety wire kit independently attaches scanner to mast

in case an accident damages the installation.

Our new mast mounts are officially approved and sold by

Raymarine, Garmin, Navico and Furuno.

ACCESSORIES AVAILAbLE

Mast Mount Adaptor Kit

Radar Guards

Cable Conduit

Page 3

SATCOM/TV

Satcom Antenna Mount

Reduce the footprint size of your satcom antenna by up to 60% to give you greater choice when choosing where to install your satcom antenna.

• Single piece composite GRP moulding for high

strength and corrosion resistance*.

• Watertight seal fits between mount

and antenna.

• Antenna fixings external to aid install

and maintenance.

* Stainless steel mounts available to install

larger KVH M9 & Intellian i9 antenna.

TIP: Mounting on a curved arch? The

Adjustable Base Wedge accessory will solve

your problem and level your satcom installation.

RADOMES SATCOM/TVOPEN ARRAy

SATCOM/TV

PowerTower

Passive Hinge Kit

Install your antenna on the cabin roof, flybridge or radar arch of your powerboat.

• Antenna fastens to PowerTower using own

mounting bolts.

• Pre-drilled mounting holes for ease

of installation.

• IP65 gland supplied to seal cable into stem

for internal cable management.

• Watertight base seal included – no need

for messy sealant.

CHOICE OF MATERIAL:

Aluminium Stronger for heavier equipment.

• White powder coated.

• 25° forward leaning (30° aft

leaning for open array).

• Choice of 130mm (5”) or

250mm (10”) heights.

Composite Lightweight, suits any boat.

• Gloss white finish.

• 30° aft leaning.

• Choice of 150mm (6”) or

350mm (14”) heights.

Stainless Steel Ideal for narrow RIB arches.

• Highly polished mirror finish.

• 30° aft leaning.

• 150mm (6”) height.

dual PowerTower

Satcom PowerTower

Part no: HS-01

Designed to lower height of installation for passing under bridges, winter storage, trailering and boat stacking.

• For 30cm Satcom Antenna ONLY.

• Safely pivot your satcom

installation through 180°

to reduce height.

• Fastened by hand,

no tools required,

can be used at any time.

Elevating the satcom antenna

above the radar eliminates

antenna interference

and ensures maximum

performance from

both applications.

Compact Dual PowerTower

Features an adjustable mounting plate

to allow for variation in radome size.

Positions the radar as close as

possible to the structural centre of

gravity, ensuring minimal

load is placed on

radar arch.

Elevated antenna mounting with small footprint.

• Option of vertical aluminium or aft leaning

stainless steel mount.

• 300mm (12”) height.

TIP: Ideal for smaller powerboats where

mounting space is limited.

SATCOM/TVRADOMES

GPS / VHF ANTENNA

CAMERAS LIGHTS

Tapered Mast

Single combination mount for multiple marine electronics. Each item is positioned for maximum performance.

• Undrilled top plate to fit any light.

• Install up to 4 GPS/VHF antenna.

• Hollow wings and stem allow hidden cabling.

• Option available to mount additional 30cm/40cm satcom at the top of the mast.

GPS / VHF ANTENNA

Fully adjustable deck base fits any surface, sloping or flat.

• 1.5m (5') pole - height can be shortened upon installation.

• Simply rotate aerial bar to orientate the antennas during install.

NeW! GPS Mounts

T-Pole

Perfect for mounting onto

a variety of surfaces: guard

rails or stanchions, ‘A’

frames and cabin roofs.

• Aerial bar can be

rotated during install

to orientate antennas.

T-Bar

rail Mount

Cost effective mounts for up to 4 GPS/VHF antennas. Easy to install and ideal for both sail and powerboats with options for pushpit rails, cabin roofs and decks.

• Marine grade 316 stainless steel.

• Cables hidden for neat install.

Part no: TP-01 Part no: Tb-01

Part no: RA-01TIP: Use a Scanstrut Deck Seal

to secure cables through the

deck or transom. Attach a single antenna

to a pushpit rail.

• Fits to rails of 25.4mm

(1”) diameter.

CAMERAS LIGHTS

Camera Mounts

Power Mount

Compact Mast Mount for installation onto yacht masts.

• Same great features as standard Mast Mounts.

Compatible with

selected FLIR &

Raymarine cameras.

Part no:

CAM-MM-01

Mast Mount

Raise your Camera from the deck to ensure clear visibility at all times. Designed with a 30° aft leaning profile and a small base footprint.

• Same great features as standard PowerTower.

Compatible with selected FLIR,

Raymarine and VEI cameras

and lights from NVTI, Sanshin

and ACR.

Part no: CAM-PT-150 150mm (6") height.

CAM-PT-300 300mm (12") height.

PowerTower

Install cameras on angled surfaces up to

22°. Align the angle and direction of the

camera when installing.

• Cables run internally

through ball joint base.

Compatible with selected

FLIR & Raymarine cameras.

Part no:

CAM-PM-01

ACCESSORIES AVAILAbLE: Nav Light Mount

Gantry Mount

GPS/VHF Antenna Mount

4° Base Wedge

ACCESSORIES AVAILAbLE: Gantry Mount

ACCESSORIES AVAILAbLE:

Adjustable Base Wedge

ACCESSORIES AVAILAbLE: Nav Light Mount

Gantry Mount

GPS/VHF Antenna Mount

Marine electronics Mounts

Page 4

BR

24 /

3G

/ 4

G18

” ra

do

me

1623

/ R

SB

-00

93

17

15 /

172

4 /

18

24

DR

S2

D

183

4 /

DR

S4

D /

18

35

193

4 /

DR

S4

A

/ 19

35

194

4 /

19

45

D

RS

6A

/ D

RS

12A

S

C30

15”

rad

om

e 18

” ra

do

me

18”

rad

om

e 24

” ra

do

me

3.5

' op

en-a

rray

4

' op

en-a

rray

4

' op

en-a

rray

S

at C

om

pass

GM

R18

/ G

MR

18H

D

GM

R24

/ G

MR

24H

D

GM

R4

04

/ 6

04

/ 1

204

18”

4kW

rad

om

e 24

” 4

kW r

adom

e 4

' op

en a

rray

B&

G

Fu

run

o

Garm

in

MO

de

LB

rA

Nd

SC

AN

Ne

r

Ty

Pe

S

C20

S

C18

SC

12

S

C12

SC

21

X

X

X

X

S

C20

SC

21

X

MA

ST

M

Ou

NT

BA

CK

STA

y

Fwd(

F)/A

ft(A

)P

OL

eM

AS

Td

uA

L P

OL

e

? =

satc

om

LM

B-F

1 /

A1

LM

P-1

L

MM

-1

DL

MP

-1-?

LM

B-F

2 /

A2

L

MP

-2

LM

M-2

D

LM

P-2

-?

LM

B-F

2 /

A2

L

MP

-2

LM

M-2

D

LM

P-2

-?

LM

B-F

2 /

A2

L

MP

-2

LM

M-2

D

LM

P-2

-?

LM

B-F

2 /

A2

L

MP

-2

LM

M-2

D

LM

P-2

-?

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

LM

B-F

1 /

A1

LM

P-1

L

MM

-1

DL

MP

-1-?

L

MB

-F1

/ A

1 L

MP

-1

LM

M-1

D

LM

P-1

-?

X

X

X

X

Se

LF-

Le

Ve

LL

iNG

rA

dA

r M

Ou

NT

i2

i3

i4

i6 /

i6p

i9

/ i9

p

Sat

com

S

atco

m

Sat

com

S

atco

m

Sat

com

BR

24 -

3G

/ 4

G

LR

A 4

00

018

” ra

do

me

4”

4kW

rad

om

e

Trac

Vis

ion

M1

Trac

Vis

ion

M2

/ M

3

Flee

t B

road

ban

d 1

50

Fl

eet

Bro

adba

nd 2

50

(cpt

.) Tr

acV

isio

n M

5 /

FB

250

Tr

acV

isio

n M

7 /

FB

50

0

Trac

Vis

ion

M9

/ F

77

Trac

Vis

ion

FB

50

0 /

V7

Sat

com

S

atco

m

Sat

com

S

atco

m

Sat

com

S

atco

m

Sat

com

S

atco

m

inte

llia

n

Low

ran

ce

KV

H

S

C12

SC

20

X

X

X

S

C20

X

S

C12

SC

20

S

C16

SC

16

X

X

X

X

X

X

X

Y

ES

(-U

)

X

X

X

YE

S (

-30

)

X

X

X

YE

S (

-45

R)

X

X

X

X

X

X

X

X

LM

B-F

1 /

A1

LM

P-1

L

MM

-1

DL

MP

-1-?

X

X

X

X

X

X

X

Y

ES

(-U

)

X

X

X

YE

S (

-30

)

X

X

X

YE

S (

-30

F)

X

X

X

Y

ES

(-3

0F)

X

X

X

YE

S (

-45

)

X

X

X

X

X

X

X

X

X

X

X

X

Co

asta

l 14

/ S

T14

C

oas

tal 1

8

Coa

stal

24

/ S

T24

Sat

com

S

atco

m

Sat

com

BR

24 -

3G

/ 4

G

GB

40

/ N

X4

0 /

45

/

NS

E8

/ 1

2 T

X0

6S

If y

ou

r m

arin

e el

ectr

on

ics

are

no

t lis

ted

, ple

ase

con

tact

Sca

nst

rut

or

visi

t w

ww

.sca

nst

rut.

com

18”

rad

om

e 4'

6kW

ope

n ar

ray

4' 6

kW o

pen

arra

y

RD

418

D /

RD

418

HD

R

D4

24D

/ R

D4

24H

D

5S

/ 9

S

RA

104

8H

D /

RA

104

8S

HD

33

ST

V

37S

TV

4

5S

TV

6

0S

TV

2kW

18

” ra

dom

e 4

kW 2

4”

rado

me

4' o

pen

arr

ay

4' o

pen

arr

ay

Sat

com

S

atco

m

Sat

com

S

atco

m

Sea

-Tel

Sim

rad

ray

mar

ine

S

C20

X

X

S

C20

X

X

M

927

22

M

926

98

X

S

C12

SC

12

S

C20

X

X

X

X

X

Y

ES

(-3

0)

X

X

X

Y

ES

(-4

5)

X

X

X

X

LM

B-F

1 /

A1

LM

P-1

L

MM

-1

DL

MP

-1-?

X

X

X

X

X

X

X

X

LM

B-F

1 /

A1

LM

P-1

L

MM

-1

DL

MP

-1-?

L

MB

-F1

/ A

1 L

MP

-1

LM

M-1

D

LM

P-1

-?

X

X

X

X

X

X

X

X

X

X

X

Y

ES

(-U

)

X

X

X

YE

S (

-30

)

X

X

X

YE

S (

-45

R)

X

X

X

X

SC

100

PO

Le

M

Ou

NT

1.9

m (6

.5”)

/

2.5

(8.4

”)

S

C10

1/2

S

C10

3/4

SC

103/

4

S

C10

3/4

SC

103/

4

X

X

X

SC

103/

4

S

C10

1/2

SC10

1/2

X

SC

103/

4

SC

105

-35/

6-3

5

SC

105-

45R

/6-4

5R

X

X

S

C10

1/2

X

SC

103/

4

SC10

5-3

5/6

-35

S

C10

5/6

S

C10

5/6

SC

105-

45/6

-45

X

X

X

S

C10

5-3

5/6

-35

X

X

S

C10

1/2

X

X

SC

101/

2

SC

101/

2

X

X

SC

103/

4

SC

105

-35

/6-3

5

SC

105-

45R

/6-4

5R

X

SA

TC

OM

150

MM

(6”)

130

MM

(5”)

35

0M

M(1

4”)

25

0M

M(1

0”)

150

MM

(6

”)

P

T20

04

P

T20

01

SP

T10

01

AP

T19

00

0

AP

T19

00

1

P

T20

05

P

T20

02

S

PT

100

2

AP

T5

U

AP

T10

U

P

T20

05

P

T20

02

S

PT

100

2

AP

T5

U

AP

T10

U

P

T20

05

P

T20

02

S

PT

100

2

AP

T5

U

AP

T10

U

P

T20

05

X

S

PT

100

2

AP

T5

U

AP

T10

U

X

X

S

PT

100

5

AP

T6

00

2

X

X

X

S

PT

100

5

AP

T6

00

2

X

X

X

S

PT

100

5

AP

T6

00

2

X

P

T20

05

P

T20

02

S

PT

100

2

AP

T5

U

AP

T10

U

P

T20

04

P

T20

01

SP

T10

01

AP

T19

00

0

AP

T19

00

1

PT

200

4

PT

200

1 S

PT

100

1 A

PT

190

00

A

PT

190

01

X

X

S

PT

100

5

AP

T6

00

2

X

P

T20

04

P

T20

01

SP

T10

01

AP

T19

00

0

AP

T19

00

1

X

X

X

AP

T6

00

2

X

P

T20

05

P

T20

02

X

X

X

PT

200

4

PT

200

1 X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

P

T20

05

P

T20

02

X

X

X

PT

200

4

PT

200

1 S

PT

100

1 A

PT

190

00

A

PT

190

01

P

T20

06

P

T20

03

X

X

X

PT

200

6

PT

200

3

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

P

T20

04

P

T20

01

X

X

X

X

X

X

X

X

X

X

X

X

X

P

T20

04

P

T20

01

SP

T10

01

AP

T19

00

0

AP

T19

00

1

X

X

X

AP

T6

00

2

X

X

X

X

A

PT

60

02

X

P

T20

04

P

T20

01

SP

T10

01

AP

T19

00

0

AP

T19

00

1

PT

200

4

PT

200

1 S

PT

100

1 A

PT

190

00

A

PT

190

01

X

X

S

PT

100

4

AP

T6

00

1 X

X

X

X

X

X

P

T20

05

P

T20

02

X

X

X

PT

200

4

PT

200

1 X

X

X

X

X

X

X

X

X

X

X

X

X

PO

We

rT

OW

er

CO

MP

OS

iTe

S/S

Te

eL

AL

uM

iNiu

MA

Lu

MiN

iuM

(S

TAiN

Le

SS

)

X

X

X

X

X

X

X

X

X

X

X

X

SA

TP

T-4

0(S

) S

AT

PT-

40

(S

) S

AT

PT-

40

(S

) S

AT

PT-

60

(S

)

X

X

X

SA

TP

T-4

0 (

S)

SA

TP

T-4

0 (

S)

S

AT

PT-

33

S

AT

PT-

33

SA

TP

T-4

0 (

S)

SA

TP

T-6

0 (

S)

X

X

SA

TP

T-4

0 (

S)

SA

TP

T-4

0 (

S)

SA

TP

T-4

0 (

S)

X

X

X

X

X

X

X

SA

TP

T-4

0 (

S)

SA

TP

T-4

0 (

S)

SA

TP

T-4

0 (

S)

SA

TP

T-6

0 (

S)

du

AL

P

OW

er

TO

We

r

X

X

X

X

X

X

X

X

X

X

X

X

SA

TC

OM

A

NT

eN

NA

M

Ou

NT

X

X

X

X

X

P

TM

-R1-

S4

0/

PT

M-R

2-S

40

X

X

X

X

P

TM

-R1-2

P

TM

-R2-

S4

0

P

TM

-R1-2

P

TM

-R2-

S4

0

P

TM

-R1-2

P

TM

-R2-

S4

0

P

TM

-R1-2

P

TM

-R2-

S4

0

X

X

X

X

X

X

X

X

P

TM

-R1-

1 P

TM

-R1-

S4

0

P

TM

-R1-

1 P

TM

-R1-

S4

0

X

X

P

TM

-R1-

1 P

TM

-R1-

S4

0

SA

TC

OM

-3

0 /

-4

0 /

-6

0r

Ad

Ar

O

NLy

WiT

H

SA

TC

OM

DP

T-SR

1-30

/ -4

0 /

-60

DP

T-SR

1-30

/ -4

0 /

-60

D

PT-

SR1-3

0 /

-40

/ -6

0

DP

T-SR

1-30

/ -4

0 /

-60

D

PT-

SR1-3

0 /

-40

/ -6

0

DP

T-S

O2-

40

/ 6

0

DP

T-S

O2-

40

/ 6

0

DP

T-S

O2-

40

/ 6

0

DP

T-S

O2-

40

/ 6

0

DP

T-SR

1-30

/ -4

0 /

-60

D

PT-

SR1-3

0 /

-40

/ -6

0

DP

T-S

O2-

40

/ 6

0

S

C30

SC

35

S

C4

5R

SC

65

SC

90

X

X

S

C30

SC

35

S

C30

SC

30

S

C4

5

S

C6

5

S

C8

0

S

C8

0

X

X

X

X

X

X

X

X

X

PT

M-R

1-S

40

/

PT

M-R

2-S

40

X

X

X

X

X

X

YE

S (

-30

) Y

ES (

-30

/-4

0)

YE

S (

-40

) Y

ES

(-6

0)

X

DP

T-SR

1-30

/ -4

0 /

-60

D

PT-

SO

2-4

0/

60

YE

S (

-30

) Y

ES (

-30

/-4

0)

X

X

YE

S (

-40

) Y

ES

(-6

0)

X

X

S

C35

SC

45

SC

45

X

X

X

X

X

X

X

S

C30

SC

35

S

C4

5R

SC

65

YES

(-3

0/-

40

) Y

ES

(-4

0)

YE

S (

-60

)

DP

T-SR

1-30

/ -4

0 /

-60

D

PT-

SO

2-4

0 /

60

D

PT-

SO

2-4

0 /

60

DP

T-SR

1-30

/ -4

0 /

-60

D

PT-

SR1-3

0 /

-40

/ -6

0

DP

T-S

01-

40

/ 6

0

DP

T-S

01-

40

/ 6

0

YE

S (

-30

) Y

ES (

-30

/-4

0)

YES

(-4

0)

YES

(-6

0)

TAP

er

ed

rA

dA

r

MA

ST

P

TM

-R1-

1 P

TM

-R1-

S4

0

P

TM

-R1-

1 P

TM

-R1-

S4

0

X

X

X

X

X

X

X

X

X

P

TM

-R1-

S4

0/

PT

M-R

2-S

40

X

X

P

TM

-R1-

1 P

TM

-R1-

S4

0

X

X

P

TM

-R1-

1 P

TM

-R1-

S4

0

X

X

X

X

X

X

X

PT

M-R

1-S

40

/

P

TM

-R2-

S4

0

X

X

Part

Nu

mber

Gu

ide

R

adar

& S

atco

m

crop

INSTRuMENTS DISPLAyS

Scanpod

Neat features and great design ensure the Scanstrut Helm Pod is the perfect choice for all cockpit configurations.

• Fits pedestal rails from 25.4 - 33.7mm (1" - 1 ¼") and rail widths from 178mm (7”) upwards.

• No Drill Fixing Kit. Customised U-bolts fit around rail and through the saddles into the back of the pod.

Flex Mount System

View your instruments from the perfect angle by using this accessory in combination with the Scanstrut Helm Pod.

Simply clamp onto your existing rail or steering binnacle and install the Helm Pod as normal.

• Fits 1” and 1 ¼” rail sizes.

• Requires 60mm (2.4”) of straight rail to mount.

Helm Pod

Part no: use with Helm Pod: SPFM-RM1-8* SPH-8D SPFM-RM1-12* SPH-12D SPFM-RM1-15 SPH-15D *Please note, not compatible with new SPH-8-W & SPH-12-W

Whether racing or cruising, our Mast Pods

give you the best view of your instruments.

Mast arms pivot to provide

a universal fit to a wide

range of mast sizes. A

cross-brace adds rigidity

and prevents sideways

movement of the pod.

• Fits mast sizes from

76mm (3”) to 223mm (8.8”).

Carbon Mast Pod

The lightweight, flexible Carbon

Mast Pod makes installing

instruments quick and easy,

providing the ideal solution

for racing boats.

• Fits 3 or 4 maxi instruments.

Mast Pod

Solve the challenge of finding a level mounting surface to install your displays onto your powerboat, RIB or sailboat wheelhouse.

Using a one-handed quick release lever, simply release, swivel and tilt to suit your requirements before locking back into position.

• Inner bracing plate eliminates potential damage from shock and vibration.

deck Pod NeW FOr 2013:

SuNCOVER AVAILAbLE

Protect your Scanpod

and instruments with

a Scanstrut Suncover.

UV stable material, pull

cord to tighten, sizes to

fit all Scanpods.

Marine electronics Mounts electrical Accessories

Junction Box The “fit and forget” Junction Box range is the

perfect sailing accessory for anyone planning

boat maintenance, providing secure, IP66

watertight connections for marine electrical

cables onboard any boat.

• Choice of ‘Standard’ box with 5 screw-down

terminals or a ‘Deluxe’ version which includes

10 fast-fit terminals for a quicker install.

• Fit directly to chosen surface. A mounting

bracket is included to allow easy removal

for inspection.

• Upgrade to IP67 with a Cable Seal Upgrade Kit.

deck Seals The only guaranteed and proven

watertight installation for your antenna

and navlight cables.

Pass cables into the boat, anywhere

on deck. No need to remove cable plug.

• Low profile shape for a stronger, impact

resistant seal. No sharp edges to hit your

foot on!

• Supplied with blank and pre-drilled

inner seals.

• Split seal eliminates need to remove

cable connectors during install.

• Captive nuts in base provide easy assembly

and allow reliable repeat installations.

Multi deck Seal

Designed to fit multiple cables up to 15mm (0.59") dia. Supplied with undrilled seal and made from marine grade aluminium with hard anodised finish to resist impact marks.

Part no: dS-MuLTi

Find your Part Number:

SB-8-5 Standard Junction Box

- 5 screw-down terminals.

SB-8-10 Deluxe Junction Box

- 10 fast-fit terminals.

SB-2G Cable Seal Pack (x 2 per pack).

WATerPrOOF GuArANTee IPX6 & IPX7 Tested & Approved.

INSTRuMENTS DISPLAyS

NeW! rok-Lok

‘Set and forget’ system ensures zero loss of clamping force over time.

Locking design provides a rock solid platform and a high clamping force with minimal effort from user.

• 360° of rotation / 136° of tilt.

• Easily adjusted. Unlock, reposition, lock again.

Install instruments direct onto

pushpit or pedestal rails.

Fits rails from 25.4 - 33.7mm

(1" - 1 ¼") diameter.

Adjustable deck Mount Adjustable rail Mount

rail Mount

A multi position mount for small electronic devices onboard.

Install fishfinders and chartplotters at the helm, RIB console, fishing boat dashboard, nav station and more.

• Designed to be versatile. Mount anywhere onboard.

• Engineered to withstand high shock loading.

• Corrosion resistant alloy castings, anodised and powder coated for extreme marine durability.

Compatible with Lifedge Surface Mount Kit - choose AMPS hole pattern when ordering.

Fit Adjustable deck Mount

to rails from 25.4 - 33.7mm

(1" - 1 ¼") diameter.

For AMPS hole pattern order the following:

rL-505-AdM Adjustable Deck Mount

rL-505-ArM Adjustable Rail Mount

rL-505-rM Rail Mount

Compact Scanpods

Options to fit new Raymarine e series and Simrad NSS models

SPd-7-W Deck Pod to fit 7” Displays SPd-8-W Deck Pod to fit 8" Displays SPd-12-W Deck Pod to fit 12" Displays SPH-8-W Helm Pod to fit 8" Displays SPH-12-W Helm Pod to fit 12" Displays

*Please note 8” model fits 6-8” centres

and 12” fits 6-11” centres

Helm Pod Rail Mount

Fit your display onto standard & curved rails. Viewing angle can be set upon installation. Cables routed internally.

SPr-7-rM To fit 7” Displays SPr-1i-rM To fit 1 Std Instrument

Helm Pod Arm Mount

Extend the pod away from narrow or crowded rails for better viewing. Designed to ensure the pod is always at the right angle despite the shape of the rail. Viewing angle can be set upon installation. Cables routed internally and accessed easily via a removable cover.

SPr-7-AM To fit 7” Displays SPr-1i-AM To fit 1 Std Instrument

Multi Display Scanpod

Fit multiple instruments and displays in one Scanpod.’

SPH-4Xi-W Helm Pod to fit 2 x Std Instruments & 7" Display SPd-4Xi-W Deck Pod to fit 2 x Std Instruments & 7" Display

NeW! Through Bulkhead Cable Seal Eliminate time consuming, sub-standard routing

of electrical cables through watertight bulkheads.

• Fit up to 10 cables to any

bulkhead from 10mm to

35mm diameter.

• Fast to fit by only one person,

from only one side of

the bulkhead.

• Moulded in high strength

nylon with an over moulded

internal seal.

Find your Part Number:

TBH-4 Through Bulkhead Seal for

4 x 16mm (0.63") cables.

TBH-10 Through Bulkhead Seal for

10 x 7mm (0.28") cables .