15 / © Wärtsilä January 2015 G - Bearings (Industrial Bearing Solutions) Wärtsilä Oil Lubricated Industrial Bearing Solutions 1 G - BEARINGS
15/ © Wärtsilä January 2015 G - Bearings (Industrial Bearing Solutions)
Wärtsilä Oil Lubricated
Industrial Bearing Solutions
1
G - BEARINGS
15/ © Wärtsilä
G – Bearings: GP, GF, GM
January 2015 G – Bearings (Industrial Bearing Solutions)2
Overview Products Installation Marine application
15/ © Wärtsilä
G – Bearings: GP, GF, GM
January 2015 G – Bearings (Industrial Bearing Solutions)
G – Bearings: GP, GF, GM
When operating in generators and turbines, the radial and axial shaft supports are
faced with very high demands in performance.
Wärtsilä can offer high performance self-aligning Industrial bearings that will meet
such requirements.
The generator bearings are available in a wide range of sizes and executions suited
for all applications, all designed according to specific DIN standards.
Although complete bearings can be supplied, we also have the capability and
expertise to design & supply retrofit components to non Wärtsilä products.
3
Overview
15/ © Wärtsilä
G – Bearings: GP, GF, GM
January 2015 G – Bearings (Industrial Bearing Solutions)
Features & Benefits
4
…available in executions supporting
both axial and/or radial loads.
…designed and manufactured using
only high quality materials for each
component based on the specific
installation.
…can be fitted with complete
monitoring of temperatures and oil
levels.
…prepared for different types of
lubrication and cooling solutions.
…robust design allowing working
speeds up to 3000 rpm.
…. split design of the housing saves
time during installation.
…the spherical bearing and spring
supported tilting pads design promotes
an easy alignment.
…all models are designed according to
DIN standards and equipped with seals
meeting specific IP protection grades.
15/ © Wärtsilä
G – Bearings: GP, GF, GM
January 2015 G – Bearings (Industrial Bearing Solutions)
All products offer
the advantages of
being self-aligned
and split for easy
installation and
serviceability.
Pedestal Type
GP
Product
Side Flange Type
GF
5
Centre Flange Type
GM
15/ © Wärtsilä
G – Bearings: GP, GF, GM
January 2015 G – Bearings (Industrial Bearing Solutions)
Industrial Bearing Solutions
6
GP (Pedestal)
Shaft Sizes Lubrication
Ø80 to Ø800 mmSelf lubrication
External lubrication
Housing Material White Metal Material
Cast Iron Tin based
The Industrial bearings are self aligning
bearings with housings made of cast iron
with centrifugally cast tin based white metal
bearing surfaces.
Available in three different designs with
variable executions to suit special
requirements.
Bearing adapted for being fixated to a
platform, designed according to DIN 31690.
Bearing with laterally positioned flange,
designed according to DIN 31693.
Bearing with flange in the middle, designed
according to DIN 31694.
GP (Pedestal)
GF (Side Flange)
GM (Centre Flange)
15/ © Wärtsilä
G – Bearings: GP, GF, GM
January 2015 G – Bearings (Industrial Bearing Solutions)
Industrial Bearing Solutions
7
GF (Side Flange)
Shaft Sizes Lubrication
Ø80 to Ø500 mmSelf lubrication
External lubrication
Housing Material White Metal Material
Cast Iron Tin based
Depending on intended installation, the
bearings can be altered to support both
axial and radial loads.
All bearing designs offer a variety of
lubrication and cooling executions to
ensure that the bearings are fully prepared
for its field of usage.
The seals in the housing are manufactured
according to different IP protection grades
to suit the specific installation.
Upon request the bearings can be
electrically insulated to prevent any
complications caused by electrical currents.(In such cases earth grounding connections
should be installed.)
15/ © Wärtsilä
G – Bearings: GP, GF, GM
January 2015 G – Bearings (Industrial Bearing Solutions)
Industrial Bearing Solutions
8
GM (Centre Flange)
Shaft Sizes Lubrication
Ø80 to Ø500 mmSelf lubrication
External lubrication
Housing Material White Metal Material
Cast Iron Tin based
Installation of additional equipment such as
oil level sight glass and PT-100 sensors is
made possible as the bearings are already
prepared for this as well.
Together with the inspection cover and
optional thermometers the Industrial
bearings offers complete monitoring of oil
levels and temperatures.
If required the bearing housing material can
be changed, e.g. if higher resistance is
needed due to higher loads.
All in all Wärtsilä’s Industrial bearings are
completely designed according to the
customers requirements or application
needs.
15/ © Wärtsilä
G – Bearings: GP, GF, GM
January 2015 G – Bearings (Industrial Bearing Solutions)
Parts & Components – GP
9
Pad PT-100
Sensor
Vibration Sensor
Pad PT-100
Sensor
Drain Plug
Inspection
plate
Axial Oil inlet
Vibration
Sensor
Radial Oil inlet
Bearing
PT-100 Sensor
Earthing
Device
Oil
Outlet
Oil Ring
Pad
Vibration
SensorBearing
Type ASeal
Type 20
Oil Sight Glass
15/ © Wärtsilä
G – Bearings: GP, GF, GM
January 2015 G – Bearings (Industrial Bearing Solutions)
Parts & Components – GF
10
Vibration
Sensor
Sight Glass
Bearing
Bearing
Type QSeal
Type 10
PT-100 Sensor
Vibration
Sensor
Radial Oil inlet
Bearing
PT-100 Sensor
Earthing
DeviceOil Outlet
Sight Glass
Drain Plug
Oil Ring
Fixation
holes
15/ © Wärtsilä
G – Bearings: GP, GF, GM
January 2015 G – Bearings (Industrial Bearing Solutions)
Parts & Components – GM
11
PT-100
Radial Oil inlet
Bearing
PT-100 Sensor
Earthing
Device
Sight Glass
Hydrostatic
Oil inlet
Thrust Pads
Bearing
Type KSeal
Type 10
Oil Ring
Axial White
metalVibration
Sensor
Sight Glass
Drain Plug
Oil Outlet
Hydrostatic
Oil inlet
Hydrostatic
Bearing
15/ © Wärtsilä
G – Bearings: GP, GF, GM
January 2015 G – Bearings (Industrial Bearing Solutions)
Installation
12
Depending on type of bearing and execution the
installation may vary but all Wärtsilä’s Industrial
bearings are split and self-aligning, radially and
axially.
The lower half of the bearing is fixated and the
shaft is placed in the bottom of the bearing
surface. Fit the oil ring around the shaft and
mount the upper part of the bearing surface.
Complete by assembling the upper half of the
housing.
Bottom Housing Half
Oil Ring
Upper Bearing Half
Upper Housing Half
Short Facts
The general installation procedure is
the same for all types of executions.
15/ © Wärtsilä
G – Bearings: GP, GF, GM
January 2015 G – Bearings (Industrial Bearing Solutions)
Industrial bearings intended for Marine
application incorporate an extra
element which guarantees bearing
correct operation:
• Oil ring guides: to ensure oil ring
position during vessel movements
Marine application
13
15/ © Wärtsilä
G – Bearings: GP, GF, GM
January 2015 G – Bearings (Industrial Bearing Solutions)
A modular testing platform
allows testing all types of
bearings, side flange, centre
flange or pedestal type, and
working conditions of load and
speed are generated to obtain
accurate results about bearing
performance.
Testing rig
14
15/ © Wärtsilä January 2015 G – Bearings (Industrial Bearing Solutions)15