1133 1134 ■Guide to oil-free slide plates MISUMI oil-free components are produced by embedding a special solid lubricant at appropriate locations. Sintered alloy is a special alloy with even distribution of solid lubricants and lubrication grease filled in pores. The metal base material supports the load while the embedded solid lubricant provides lubrication, resulting in superior oil- free durability even under harsh conditions. ■Features ᶃ These products are most effective at locations where require a constant supply of lubricant, eciprocating motion or fre- quent start and stop occurs and oil film is difficult to form. ᶄ Because these products are used under oil-free conditions, no lubrication equipment is needed. This shortens the assem- bly time and results in a cleaner environment by preventing oil pollution and other problems. ᶅ These products have excellent seizure resistance. <Precautions> ·If the grinding surfaces are too rough, the excellent wear resistance will not guaranteed. ·Applying grease during the intial break-in can guarantee better performance. ■ Physical properties Material Catalog No. Allowable load N/mm 2 Allowable sliding speed m·min. Limit PV N/mm 2 ·m/min. Specific gravity Base material hardness (HB) Tensile strength N/mm 2 FC250+Special solid lubricant MWF·MWFT 5 10 30 7.1~7.3 <241 250 Copper alloy+Special solid lubricant SEW·SEWT·STW·STWT·UTW 50 24 108 8.2 >210 600 Special sintered alloy (Baseplate material: SS400) SEZ·STZ 25 30 98 - > 45 - ■ Material properties and applications Material Wear resis- tance Seizure resistance Allowable load Impact resistance Life time Price Application FC250+Special solid lubricant ○ △ △ ○ ○ ◎ Applicable to low load conditions. Seizure occurs under high load conditions. Copper alloy+Special solid lubricant △ ◎ ◎ ○ △ △ Applicable to high load conditions. For general purpose. Special sintered alloy (Baseplate material: SS400) ◎ ◎ ◎ △ ◎ ○ Applicable to high load conditions, with excellent wear resistance and relatively weak impact resistence. ◎: Excellent ○: General △: Slightly weak OIL-FREE SLIDE PLATES -GUIDE- OIL-FREE SLIDE PLATES OIL-FREE SLIDE PLATES Product name Catalog No. Page OIL-FREE SLIDE PLATES -COPPER ALLOY 20mm TYPE ・ 4 BOLT HOLES- 1136 OIL-FREE SLIDE PLATES -SINTERED ALLOY 20mm TYPE ・ 4 BOLT HOLES- 1138 OIL-FREE SLIDE PLATES -STEEL 20mm TYPE ・ 2 BOLT HOLES / 4 BOLT HOLES- 1140 OIL-FREE SLIDE PLATES -STEEL 10mm TYPE ・ 2 BOLT HOLES- 1140 SLIDE PLATES -STEEL 20mm TYPE ・ 2 BOLT HOLES / 4 BOLT HOLES- 1141 SHIMS FOR OIL-FREE SLIDE PLATES SMP 1142 OIL-FREE SLIDE PLATES -COPPER ALLOY 10mm TYPE- 1143 OIL-FREE SLIDE PLATES -COPPER ALLOY 10mm HIGH SURFACE PRESSURE TYPE- 1146 OIL-FREE SLIDE PLATES -COPPER ALLOY L-SHAPE TYPE- 1147 OIL-FREE SLIDE PLATES -COPPER ALLOY BLANK TYPE- 1148 OIL-FREE SLIDE PLATES -SINTERED ALLOY BLANK TYPE- 1149 OIL-FREE THIN SLIDE PLATES -COPPER ALLOY 5mm TYPE- 1144 OIL-FREE SLIDE PLATES -COPPER ALLOY 10mm COMPACT TYPE- 1145 OIL-FREE SLIDE PLATES -COPPER ALLOY 10mm COMPACT TYPE- 1145 OIL-FREE SLIDE PLATES -SINTERED ALLOY 10mm TYPE ・ 2 BOLT HOLES- 1139 OIL-FREE SLIDE PLATES -SINTERED ALLOY 10mm TYPE ・ 3 BOLT HOLES- 1139 OIL-FREE SLIDE PLATES -SINTERED ALLOY 10mm TYPE ・ 4 BOLT HOLES- 1139 OIL-FREE SLIDE PLATES -COPPER ALLOY 10mm TYPE ・ 2 BOLT HOLES- 1137 OIL-FREE SLIDE PLATES -COPPER ALLOY 10mm TYPE ・ 4 BOLT HOLES- 1137 OIL-FREE SLIDE PLATES -SINTERED ALLOY 20mm TYPE ・ 2 BOLT HOLES- 1138 OIL-FREE SLIDE PLATES -CAST 20mm TYPE ・ 2 BOLT HOLES- 1135 OIL-FREE SLIDE PLATES -CAST 20mm TYPE ・ 3 BOLT HOLES- 1135 OIL-FREE SLIDE PLATES -CAST 20mm TYPE ・ 4 BOLT HOLES- 1135 OIL-FREE SLIDE PLATES -COPPER ALLOY 20mm TYPE ・ 2 BOLT HOLES- 1136 OIL-FREE SLIDE PLATES
9
Embed
OIL-FREE SLIDE PLATES - Dayton Progress · 1133 1134 Guide to oil-free slide plates MISUMI oil-free components are produced by embedding a special solid lubricant at appropriate locations.
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
1133 1134
■ Guide to oil-free slide plates
MISUMI oil-free components are produced by embedding a special solid lubricant at appropriate locations.
Sintered alloy is a special alloy with even distribution of solid lubricants and lubrication grease filled in pores.
The metal base material supports the load while the embedded solid lubricant provides lubrication, resulting in superior oil-
free durability even under harsh conditions.
■ Features
①�These products are most effective at locations where require a constant supply of lubricant, eciprocating motion or fre-
quent start and stop occurs and oil film is difficult to form.
②�Because these products are used under oil-free conditions, no lubrication equipment is needed. This shortens the assem-
bly time and results in a cleaner environment by preventing oil pollution and other problems.
③�These products have excellent seizure resistance.
<Precautions>
·If the grinding surfaces are too rough, the excellent wear resistance will not guaranteed.
·Applying grease during the intial break-in can guarantee better performance.
• e e o initi l re in re in ill e t e rod ct ore e ecti e
1.6
1.6
ℓ Catalog No. W L
14
STS
15
30
20 40
30 50
50 75
14
18
30
20 40
30 50
50 75
14
22
30
20 40
30 50
50 75
OrderCatalog No. W - L
STS 18 - 50
Days to Ship
Price
STWH
10
φ9
20
100(L)
160(L)
20
φ15
4+0.04+0.02
W
W
W
ℓ
ℓ ℓ
220(L)
20 ℓ ℓ ℓ
• W=18~48ll ro nd
C1
1.6
φ9
10+0.04+0.02
34
20 4
φ15
W
W
ℓ
• W=58・68
100(L)
34
20 ℓ ℓ
160(L)
W34
20 ℓ ℓ ℓ
220(L)
ll ro ndC1
1.6
• Slide direction
V�Mounting bolts Low head screws M8×15
R Copper alloy Special solid lubricant (embedded)
ℓ Catalog No. W (L)
60 STWH
18100160220
28100160220
38100160220
48100160220
58100160220
68100160220
OrderCatalog No. W - (L)
STWH 48 - 220
Price
OIL-FREE SLIDE PLATES-COPPER ALLOY 10mm HIGH SURFACE PRESSURE TYPE-
STCW
ℓ ℓ1 Catalog No. W L
45 15
STCW
18
75
50
25
100
75 125
100 150
45 15
28
75
50
25
100
75 125
100 150
45 15
38
75
50
25
100
75 125
100 150
45 15
48
75
50
25
100
75 125
100 150
R Copper alloy Special solid lubricant (embedded)
OrderCatalog No. W - L
STCW 18 - 75
Price
ℓ±0.2ℓ1 ℓ1
φ11
φ7
3
10 +0.04+0.01
W-
0.1
-0.
3
L-0.1-0.3
2-R2
R2
1.6
6.3
VMounting bolt M6×15
• Slide direction
Days to Ship Days to Ship
OIL
-FR
EE S
LID
E PL
ATES
1147 1148
OIL-FREE SLIDE PLATES-COPPER ALLOY L-SHAPE TYPE-
STLST
Mounting bolt Location of mounting boltCatalog No. (W) (L)
Speciication Qty. ℓ ℓ1
M8
2 60-
STLST
26
100
355
150
4 50 200
M10
2 60-
32
100
355
150
4
50 200
70 70 250
55 50
50
200
70 70 250
565 65 300
80 75 350
R Copper alloy Special solid lubricant (embedded at /// parts)
OrderCatalog No. (W) - (L)
STLST 26 - 150
Days to Ship
Price
Days to Ship
Price
20
11.4
11
R2
R2
φ14φ9 φ11
φ11
φ18
8±0.1
10±0.1 22±0.1
R1
30
9
+0.
10+
0.05
10
15
+
0.10
+0.
05
45
20
14
+0.
10+
0.05
25
26(W) 32(W) 50(W)
1.6
1.6
1.6 1.
6
1.61.6
20
(W)
( W)
( W)
( W)
100(L)
ℓ
ℓ
ℓ ℓ1 ℓ
ℓ ℓ1 ℓ1 ℓ
ℓ20
20
20
150(L)
200・250(L)
300・350(L)
VThrough hole for W=32
OIL
-FR
EE S
LID
E PL
ATES
OIL-FREE SLIDE PLATES-COPPER ALLOY BLANK TYPE-
STBW
Recommended bolt Catalog No. W L T
M6×10Small flush head screw
STBW
20
3055
25
30400
M8×15Hexagon socket head cap
screw
35
605
1040
50
M10×20Hexagon socket head cap screw
60 15
R Copper alloy Special solid lubricant (embedded)
L
W
4-R2
T+0.1
0
6.3
1.6
• When using • Please cut it to the desired length before using. • Please drill mounting bolt holes before using. • Please leave the machining allowance of 0.3mm.
• Slide direction
• Slide direction
OrderCatalog No. W - L - T
STBW 20 - 305 - 5
1149 1150
OIL-FREE SLIDE PLATES-SINTERED ALLOY BLANK TYPE-
SPZB
R Special sintered alloy
//// part is a sintered layer
T=10 S45C (Baseplate)
T≧20 SS400 (Baseplate)
OrderCatalog No. W - L - T
SPZB 100 - 320 - 10
Days to Ship
Price
• Slide direction
W
T±0.02L
3.21.6
sintered layer
• When using • Please cut it to the desired length with drilling holes before using.
• Please machine the back side when adjusting its thickness.
• Apply grease during the initial break-in before using.